[WM2005] Utility to Clear Storage Inside - MDA III, XDA III, PDA2k, 9090 General

Here is some files i grabbed from Universal to clear your presistent storage and get the device as new

THANX
interesting... let me try
buzz

anyone tried this in BA WM5 yet?
buzz, is there any ways to change BA WM5 splash screen?

I tried. It didn't work.

Some error? or it just doesn't work?

ncruz, i tried it also. It goes through the steps but after a reset storage is not wiped.

Ok, ill check if it needs some more files or something :\

No error, it just didn't wipe anything.

right
Thats right Mastiff I try on my BA it didnt clear anythink .....

Related

Remove Programs List is gone

Have anyone experienced this problem before?
Just cleaned up my pc with Dinnarsoft memaid & Pocket Mechanic.
I dont know whether these programs are the ones that did it...
basically, after cleaning all the rubbish from pocket pc, I tried to remove a program, suddenly I saw the "remove program" list is empty.
I can still run all the programs on my ppc (WM5), however, it doesnt seem to be able to sync anymore...
any suggestion?
Thanks
I've got that same problem on my Cingular 8125. I'm not sure how it happened, but if I can't find a solution, then I'm going to hard reset and start re-installing apps...
same here
I have the Cingular 8125 also...very frustrated with this problem. Can't sync, cant install, cant uninstall, cant do anything related to programs adding/removal. Everything else works fine, except the "remove programs" does not have anything listed on it, not even the total program memory available...its like the phone's lost its mind...
can anyone help pls, or at least point me in the right direction?
Thanks alot
I searched and searched and could not find where anyone else came up with a solution other than to hard reset. I ended up hard resetting and installing all my applications again.
My 8125 has also been hit by this problem now.
I was installing some .exe file with activesync. Since it was taking a while to be sent to the phone from the computer, I decided to install a another .cab file in the meantime and hoped the .cab file would finish before the .exe file from the computer was done being sent to the phone. They kind of happened at the same time. I guess I was being too greedy. Then it happened.
Then I got notification that both the installations were unsuccessful.
Soft resets don't seem to do anything.

Ext Rom does not load...

I have searched the forum,but my problem is a little weired,after upgrading my madio and ce rom image load properly but my extension rom does not,ie the autorun gives me a msg saying "customize in 3 sec" but after that nothing happens,tried a hard reset and reflashing(also from the sd card ) but no luck Could anyone pl help me out in this??
You need to go to wiki and read about the ext rom in the kitchen.
Here you will get a better understanding of what it does, how it works, be able to open it and be able to see if you have anything in it.
Try that first then come back with a tad more info.

Goin' nuts! Who can help me with this?

Hello all, best wishes for all of you.
I am new on this forum and read many stuff here allready. However i didn't find a real solution yet for my problem to get cab-files installed, f.e.:
I'd like to install Gyrator 2 on my HTC Touch HD (UK) (And other software)
When i try this i get this error:
"The file "gyrator" cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring the file".
The same message occures when i try to do this with other cab-files. GSen was going fine and even CabInstaller did. Net Compact Framework 3.5. installed and ROM version: 1.14.401.3
I copied the cab-files from PC to PPC by dragging it into the Storage Card.
I would really appreciate your help, because im goin' nuts!!!
Tia ....
Hello.
try this:
- make a soft reset and try again to install from the SD card
- make a soft reset, copy the .cab file with activesync to the phone memory (not on the SD card) and try again to install
when this also won´t work I´m afraid you will have to hard reset your phone..
i had same problem
why dont you just use Gsen, same thing, works great! its definately here
BlackMonkey said:
Hello.
try this:
- make a soft reset and try again to install from the SD card
- make a soft reset, copy the .cab file with activesync to the phone memory (not on the SD card) and try again to install
when this also won´t work I´m afraid you will have to hard reset your phone..
Click to expand...
Click to collapse
Didn't work either ... A hard reset? Uhm .... Don't like that, i hope and will wait first for a solution ...
patterns said:
i had same problem
why dont you just use Gsen, same thing, works great! its definately here
Click to expand...
Click to collapse
As said it is not only Gyrator but it occures with more cab-files. The rotate is not my only goal, therefor i surely could use Gsen, but Gyrator 2 cn do much more. The same with other 3rd Party's ...
Use Advanced Configuration to make sure that your security warning is disabled.
What .cabs are you trying to install?
Problem SOLVED!!
AllTheWay said:
Use Advanced Configuration to make sure that your security warning is disabled.
What .cabs are you trying to install?
Click to expand...
Click to collapse
Problem solved! The way i used CabInstaller was wrong. Instead of open the CaBinstaller first and then adding the cab-file and destination path, i double clicked on the cab-files first and then it won't work, because i gave CabInstaller permission to take over the control of installing cab-files
Thank you anyway for thinking with me ..
Great to hear you solved your problem!
<off-topic>Could you please change your subject in the initial post? subject is supposed to describe what the thread is about like "unable to install CAB files" or something like that...thanks<off-topic>

Bluetooth not working

Hi, my bluetooth does not seem to work on the device. If I reset it i get the error message on start up saying 'BTTRAYCE' is not a vlaid Pocket PC application. Is my unit faulty. I have thought about doing a hard reset on the device but wanted to check with you guys if there is a simple fix, the unit needs replacing? or if the hard reset would work. If I was to do the hard reset what can I use to backup all my contacts with there facebook links etc and will the facebook links still exist?
Bladesharp said:
Hi, my bluetooth does not seem to work on the device. If I reset it i get the error message on start up saying 'BTTRAYCE' is not a vlaid Pocket PC application. Is my unit faulty. I have thought about doing a hard reset on the device but wanted to check with you guys if there is a simple fix, the unit needs replacing? or if the hard reset would work. If I was to do the hard reset what can I use to backup all my contacts with there facebook links etc and will the facebook links still exist?
Click to expand...
Click to collapse
You can use a program called Sprite Backup, although its not free. That will backup a lot of things, but to be honest, its probably best to start from scratch as it backs up all registry changes too, which could be the problem for you.
My bluetooth works fine, what part are you having trouble with?
Bluetooth Issues
I am having the same problem.
I have narrowed it down to tomtom installation (no bluetooth issues until tomtom is installed)
I have tried with TT7 910 9185 as well as TT7 445 and after the reboot the same error occurs.
I have also tried installing it on the memory card, and hard resetting it, however, the TomTom doesn't appear to talk to any Satellites.
I installed Tomtom 7.910.9185 and it says "Unable to start. Not enough memory" or similar. I installed it from cab on my 8GB Storage Card in the same way that worked perfectly on my Raphael.
The point of telling you that is my bluetooth is still working perfectly.
As for you Bladesharp, surely if you Activesync all the relevant links and details will remain with your contacts? I'd say a hard reset will determine if it's a hardware issue.
rb14 said:
I installed Tomtom 7.910.9185 and it says "Unable to start. Not enough memory" or similar. I installed it from cab on my 8GB Storage Card in the same way that worked perfectly on my Raphael.
The point of telling you that is my bluetooth is still working perfectly.
As for you Bladesharp, surely if you Activesync all the relevant links and details will remain with your contacts? I'd say a hard reset will determine if it's a hardware issue.
Click to expand...
Click to collapse
I'm on 7.915 for TomTom and don't have the issue.
Links to Facebook won't transfer with Active Sync, they are stored somewhere seperately on the phone and are not part of the Contacts program in pOutlook.exe, they are part of Manila which is not transferable. Not sure where it is stored, have been looking now for about 2 months
I came across something similar to this last week after installing TomTom from a CAB, and found this post on a related issue...
http://www.noeman.org/gsm/trash-section/65951-tomtom-7-bluetooth-problems-sorted.html
I deleted the two bluetooth files (BtSdKCE30.dll & BtCoreIF.dll) from the TomTom CAB as described, did a hard reset and reinstalled, and haven't had the problem since. Could be the same issue?
Could someone who has not installed TomTom please post the dates of their BtCoreIf.dll & BtSdkCE30.dll? Mine are both 04/24/08 20:10.
Does anyone know if it is possible to revert to the ROM version of these files WITHOUT doing a hard reset?
If some kind person was able to provide me with the ROM version, can I just overwrite the ones in RAM?
R
These came from my device's \Windows directory, and are dated 14th May. I think they are unaffected by this problem, certainly I don't get the boot delay or BTTray boot crash that seem to be the possible symptoms of this. (Use caution, of course; backup what you can before tinkering in case of disaster.)
Sounds the same as my thread
http://forum.xda-developers.com/showthread.php?t=522373
someone already tried the above files? will it correct the problem?
Thanks for the files.
I am happy to confirm that installing the two DLLs gets BTTrayCE.exe working again.
I just renamed the 04/24/08 versions to .was and use Total Commander to copy the files from my storage card to \Windows and rebooted the phone... ActiveSync wouldn't let me copy them directly from my PC as it said there was already a 05/14/09 version there and it was read-only!
As it rebooted, it complained that BtCoreIf.dll was from an unknown supplier but I just OK'd that and everything is fine. Bluetooth & TTN working.
R.
PS Didn't need to copy BTTrayCE.exe as this had not been overwritted.
Ah, thanks for letting me know. I wasn't sure if the exe was also needed, I only included it since one of the symptoms I was getting was that this wasn't a valid executable; but I guess that was just caused by the corruption of the dll's.
I don't think the DLLs are corrupted, just an earlier version.
Just like the bad old days of Windows 3.1 where installing one package would break others due the installing of different versions common DLLs. Gosh, I feel old!
R.
dicko99 said:
I don't think the DLLs are corrupted, just an earlier version.
Click to expand...
Click to collapse
Ah yes; that makes more sense! I still had a boot delay even with the files from the most recent TomTom version I could find.
Hi there,
i had the same Problem with TT. In my case I also copyed the BTTrayCE.exe. Now I dont get any error anymore but the Bluetooth can still not be started. Can somebody please upload the Original BTTrayCE.exe. Thank you
I did a reset of my Swisscom German Device. Copyed the 3 BT Files and installed the TT7 v7.910.9185 again. After restart of my Device the same BT Error. I replayced the 3 Files with my Original ones and restarted again. New Error comes up "Bluetooth Stack can not be started"
zizzo
Thanks guys a lot. Rewriting those two files solve the problem. Bluetooth works now.
ianjd said:
These came from my device's \Windows directory, and are dated 14th May. I think they are unaffected by this problem, certainly I don't get the boot delay or BTTray boot crash that seem to be the possible symptoms of this. (Use caution, of course; backup what you can before tinkering in case of disaster.)
Click to expand...
Click to collapse
Thanking you very much kind sir. I unzipped these files directly to my storage card in USB mode and just double clicked the exe file and it fixed my bluetooth up for me. (good job as I am a technical biff when things get registry level)
EDIT sorry I thought it did but it didn't just fix it by double clicking the exe. I've hard reset now as I don't really know what I am doing
As said in the thread here:
http://forum.xda-developers.com/showthread.php?t=522373&page=4
There is no need to replace the two files.
Just delete them and soft reset. They will be replaced with the two right ones.
Bluetooth problem with TomTom resolved!
matrixis2day said:
I replayced the 3 Files with my Original ones and restarted again. New Error comes up "Bluetooth Stack can not be started"
Click to expand...
Click to collapse
I had the same and here's what I just discovered and what worked:
I removed the files and expected them to be replaced upon restart. When I checked I noticed a file in the \Windows directory named BtSdKCE50.dll - I had not noticed this before. I (re)moved this, rebooted again and now Bluetooth and FM Radio (!) are working, yay!
hth,
TA2
This fixed my problem. Couldnt delete the old files but copied the replacements over the top and that sorted it. My version of Tom Tom wont work stil but it is 7.5 I think.
I've had exactly the same problem I've tried overwriting the dll's with the files provided in this thread,
Now whilst I don't get the error message, when I try and enable bluetooth, I get "cannot start bluetooth stack" error
Any ideas peeps?

diamond problem help!!!!

hello guys i'm a huge fan of all the work and help that i can get from this forum so i'm asking again for help.
After i flash my diamond with custom rom he develope a problem.
I use all the steps the mtty and everything but when i put anything in my memory storage it can't be played it can't be opened it won't do anything
If i try to play a file it says that the file is corrupted... if i try to instal something it says the instalation is unsucsessfull and soo on...
So can you help me to fix my memory storage... I flash it clear it but nothing works...
Please hepl!!!
try to change rom or hard-spl...maybe is rom related
if nothing works i think you have to format your internal memory to do this soft reset then press volume down and the central button of the d-pad and press down..
i use several roms after the problem i will try to use different hard spl
I format the memory storage several times but that won't solve the problem either...
Do you think that this comes from the spl???
veli4ko said:
i use several roms after the problem i will try to use different hard spl
I format the memory storage several times but that won't solve the problem either...
Do you think that this comes from the spl???
Click to expand...
Click to collapse
maybe...if changing it doesn't help i think you have bricked your phone...and there is only a solution...bring it back to htc
what do you mean to put the original rom from htc...
or to send the diamond up to service...
I can't understand that: when i put something in the memory storage won't do anything but when i cut it into the main memory it's ok..????!!!!
veli4ko said:
what do you mean to put the original rom from htc...
or to send the diamond up to service...
I can't understand that: when i put something in the memory storage won't do anything but when i cut it into the main memory it's ok..????!!!!
Click to expand...
Click to collapse
i was meaning bring it back to the service...
veli4ko said:
hello guys i'm a huge fan of all the work and help that i can get from this forum so i'm asking again for help.
After i flash my diamond with custom rom he develope a problem.
I use all the steps the mtty and everything but when i put anything in my memory storage it can't be played it can't be opened it won't do anything
If i try to play a file it says that the file is corrupted... if i try to instal something it says the instalation is unsucsessfull and soo on...
So can you help me to fix my memory storage... I flash it clear it but nothing works...
Please hepl!!!
Click to expand...
Click to collapse
Hy veli4ko here is HardSpl
To veli4ko
here is a Stok HardSpl
To veli4ko
1. Solution :
- On smartphone: press volume down and reset simultaneously to get the boot mode. Once you made that follows the instructions on the screen.
2. Solution :
- Possibly you do not succeed the first step to obtain a version of HardSPL Diamond, copy the file there. ROMUpdateUtility.exe nbh and running the phone connected to PC and a loader.
Good luck and more attention next time !
thanks
DjMaryuslive but that won't solve the problem... when i put it in boot mode i saw that i were with hardspl 1.93 and the i swich with stockSPLs_htchackerssign.zip in the ROMUpdateUtility.exe
and then i make hard reset but problem is still there... i don't know what to do... any more ideas

Categories

Resources