I have just gotten this phone and have unlocked it after following the top notch info here by Itsme and others! My question is to see if anyone knows how to increase the inbound phone volume on this phone. I have used the slider on the speaker icon and still not loud enough. Thanks in advance!!
Hi...
I know this is silly,but if u mean in call phone volume,so have u tried raising the volume while in call...
RAGO :lol:
Tried that . Somewhere I read that there was a fix for the low volume and I can't find it , even tried the search.............
I have this problem when on my MDA III. The only way to get a decent ringtone volume so far is to move both sliders (from the command bar) to maximum. But then the screen taps and button presses are way too loud.
I'll keep looking for the fix... :?
Related
Is there a way of lowering the speaker volume?
When I am on a call, despite having the volume set to the minimum, it is still too loud.
Anything I can do?
Same for me here. If anyone knows a way please let us know
Have you guys actually lowered the phone volume to minimum, or the PDA volume by mistake, there are two sliders, if I set the phone to minimum you cannot hear a thing! - or when answering a call are you holding the answer button too long causing the phone to use Speaker phone volume - Mike
My Orbit is the same,
Same Problem here.
I set the speaker volume while talking to minimum and it stays too loud.
Hi!
I have the same problem.... unfortunately it can not be solve, with the volume level setting..
I have the HTC P3300 and have no problem with the volume however would love to increase it a bit louder. Is there a tweak for this?
Thanks,
In call speaker volume is to loud also
I've got the same problem. Eventhough I set call volume to minimum the speaker is much to load. Any of you found a solution to this problem?
Same here....volume way to amplified
I have the same problem,
One minute my phone was fine - sounded great, 5 minutes later when I used it again the "In-Call" volume and "Speaker" volume are WAY to loud.
Anybody got a clue as to why this is happening and how to fix it, its driving me mad!
(I hope this is a software fault and not hardware)
Thanks,
Fakiee
RMAd
Ok so the phone was still in warrenty. T-mobile sent an RMA bag (RM special delivery) for me to send the phone to their repairs:
http://www.sbe-ltd.co.uk/
I sent the phone and reported the problem as "in-call speaker distorted". The repair was made and completed the next day (yesterday) then sent back via special delivery so my phone should arrive back today.
I doubt SBE have fixed the problem. They most likely watched the phone turn on then sent it back. But we will see. If they have not fixed it I will be replacing the "in-call" speaker myself. I will post the guide here if it solves the problem.
MDa II "in-call" speaker FIXED
SBE returned the phone and completed the repair. Im assuming all they did is replace the "in call" speaker. For those who cannot RMA the phone I suggest a search for MDA III internal speaker on the bay then follow the dissasembly guide and replace.
Hope this helps!
Volume still too loud
UPDATE
After the unit was RMA'd i realised that infact they had not fixed the problem. The ring and incall volume is still WAY to loud.
When I recieve a call i have the incall speaker (when you have the handset next to your head/ear) set to the lowest setting and the sound is almost defening, if i have it on the highest setting it distorts the speaker and is inaudiable.
This is a problem with the phones hardware or software and not the wrong settings. Can anyone please help, is their a registry setting for general volume settings that can be adjusted?
Thanks for your help,
Andy.
I had the same issue, but this was after i had tampered with the registry settings to increase the volume on the wired earphones. It is a fine balance! Suggest re-installing the OS to get back to deault settings if you have been in the registry
Hello,
If I use the volume control slider on the left side and reach the maximum volume position I get a loud beep. I'm not talking about in-call volume , just what you get when you change volume - let's say at your today screen.
Unfortunately I can’t find both a solution already published at the forum or the registry setting to suppress this beep. Is there anyone who knows how to turn the beep off?
Thanks,
Klausi
Hi,
I just wondered if you can set volume for the integrated hands free function of the artemis. When you turn on this function, volume is too high. You can't change the volume. Any ideas?
Do you mean the hands-free that comes in the box? It has a small side slider for volume adjustment.
I mean the integrated hands free function. It's activated by pressing and holding the green phone button.
That's the speakerphone. Actually u can lower the volume a bit with the volume adjustment but even at its lower setting its rather loud.
On the other hand I usualy activate the speakerphone in the car where there is a lot of noise so its not a problem.
Maybe someone else knows how to lower it still, yet u wouldnt want a speakerphone u can't hear unless u put it beside your ear.
Yes, the speakerphone, sorry .
It's very loud. Perhaps someone knows the registry settings ?!
I have the same problem. Even on when the volume slider is all the way down, the speakers start to make a cracking noise and is too loud.
I have FUZE and the ringing volume (any notification) is terrible. I increased the in call volume and have been googling for an hour looking for the registry keys to increase alarm, sms, phone ringer, etc. and can't find them. Can anyone help? I can't even hear my phone if it is the other side of the room.
pls change bell , or take it out and check with battery of 1.5v, if it does not work, pls change.
hah2110 said:
I have FUZE and the ringing volume (any notification) is terrible. I increased the in call volume and have been googling for an hour looking for the registry keys to increase alarm, sms, phone ringer, etc. and can't find them. Can anyone help? I can't even hear my phone if it is the other side of the room.
Click to expand...
Click to collapse
zaidzarafaisal said:
pls change bell , or take it out and check with battery of 1.5v, if it does not work, pls change.
Click to expand...
Click to collapse
WHAT?!?!?!?!?!
Anyone....?
Anyone with anything useful?
Go here. http://forum.xda-developers.com/showthread.php?p=2731299
paste over your old file. See if it helps.
Hey guys,
I hope I'm not the only one, but for all of you that have an "ORIGINAL" ring sound, is it low when you receive a call?
I have the ring volume at MAX and I'm using a "office ring" ringtone, but it's just soooo low and can barely be heard when placed in a holder and in my pocket.
When I searched this forum, I found this thread, http://forum.xda-developers.com/showthread.php?t=581477&highlight=ring+volume . Could this really be the cause of the problem? I do in fact have vibrate and ring, but I use the custom "av1pr" sequence that people from the Jade threads mentioned.
Hopefully there's a solution! Thanks!
ok i did a lot of testing and found out the vibrate has nothing to do with the ring volume
the system sound volume seems to be controlling the ring volume even when i separate the volume controls (one for ring, one for system).
i dont like the system sound loud, but i have no choice because the ring is very very low even at 100%
any of you guys have this problem or know a fix?
thanks
For a past phone, I had copied the ringer sound file that I liked to my PC, used a free audio recording/editing program and re-recorded the sound with a louder volume. Then, I copied the new sound file back to the phone and pointed the phone to it.
wildfxp said:
any of you guys have this problem or know a fix?
thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=560605
Thanks guys for the help.
I actually used the "registry" fix from the link, but where could I find a program that could increase the volume of a sound clip?
My sound is still a bit low.
I used the "Sound Recorder" which comes with Windows.
wildfxp said:
Thanks guys for the help.
I actually used the "registry" fix from the link, but where could I find a program that could increase the volume of a sound clip?
My sound is still a bit low.
Click to expand...
Click to collapse
Thank you, I will test it out