Ring volume too low.. - Touch Pro2, Tilt 2 Windows Mobile General

Hey guys,
I hope I'm not the only one, but for all of you that have an "ORIGINAL" ring sound, is it low when you receive a call?
I have the ring volume at MAX and I'm using a "office ring" ringtone, but it's just soooo low and can barely be heard when placed in a holder and in my pocket.
When I searched this forum, I found this thread, http://forum.xda-developers.com/showthread.php?t=581477&highlight=ring+volume . Could this really be the cause of the problem? I do in fact have vibrate and ring, but I use the custom "av1pr" sequence that people from the Jade threads mentioned.
Hopefully there's a solution! Thanks!

ok i did a lot of testing and found out the vibrate has nothing to do with the ring volume
the system sound volume seems to be controlling the ring volume even when i separate the volume controls (one for ring, one for system).
i dont like the system sound loud, but i have no choice because the ring is very very low even at 100%
any of you guys have this problem or know a fix?
thanks

For a past phone, I had copied the ringer sound file that I liked to my PC, used a free audio recording/editing program and re-recorded the sound with a louder volume. Then, I copied the new sound file back to the phone and pointed the phone to it.
wildfxp said:
any of you guys have this problem or know a fix?
thanks
Click to expand...
Click to collapse

http://forum.xda-developers.com/showthread.php?t=560605

Thanks guys for the help.
I actually used the "registry" fix from the link, but where could I find a program that could increase the volume of a sound clip?
My sound is still a bit low.

I used the "Sound Recorder" which comes with Windows.
wildfxp said:
Thanks guys for the help.
I actually used the "registry" fix from the link, but where could I find a program that could increase the volume of a sound clip?
My sound is still a bit low.
Click to expand...
Click to collapse

Thank you, I will test it out

Related

How to increase ring volume?

hello everybody,
Sorry if this has been already discussed, I've searched the forum but couldn't find any answer!
My ring volume is low, sometimes the vibration makes louder "noise" than the ring itself, no matter what ringtone I set. All the time the ring volume is set to maxim and I try to use only built in tones.
Any ideea how to increase the volume? Does the speaker tweak work also for this (the Audio3 para file)?
Many thanks,
Radu
my speaker is loud as ****!!! are you sure you don't have a bad speaker? time for a warranty exchange?
I agree. It does sound like you have a bad speaker. On max volume, my device is quite deafening (I usually set it down a notch).
Try playing a song at max volume without headset connected so that it'll play through the rear speakers. If the volume is satisfactory, then it's probably a software fault somewhere (ring volume vs device volume?). If the volume is still soft, then you've got a bad speaker.
Thanks
Thank you for your answers.
I did some test and I really hope it's not a speaker problem. During a phone call, on speaker, I could listen very well outside, in a crowded & noisy space. Only the ring tones seems to be lower volume, at least for my ears.
ring
i am hv
aving the same problem. mine worked great till the phone froze up and then it reset it self, and all my info was gone and the ring volume was weak.
will keep looking but thinking i will have to reflash the unit
have you installed any program?
have you installed any program before this? I realized my problems might have come from KeepMyRingTones app... after a hard reset sound seems to be better, but still not as I wanted to be.
Same problem here...I wish the ringer was really loud. I used to have a nokia n82 and really loved the ringer and speaker volumes on it. Hoping Windows 6.5 will improve the ringer on this phone.
Try installing SRS Wow HD or HDTweak
Both have increase in volume settings

Anyway to boost phone sound?

Some of you may have this problem, some of you may not, but me and my cousin have this problem with our G2 where the sound from the other line is very quiet for us when we use the phone... as a phone. So what I want to know is, is there any way to increase the sound on for this? Do we have defected phones?
I have this problem as well. In call volume is maxed out but it doesn't sound very loud at all.
I have root access with CM 6.1.0 RC3.
My calls are loud and clear. Its the speaker phone thats low for me.
Does it happen with all calls incoming and out going?
Also are you on wifi?
How is your signal strength?
Same with me my speak phone volume is lower than I would like it, but head set speaker loud and clear
Sk17z0 said:
My calls are loud and clear. Its the speaker phone thats low for me.
Does it happen with all calls incoming and out going?
Also are you on wifi?
How is your signal strength?
Click to expand...
Click to collapse
Yes, it's all of the calls that I make and receive. I'm never on wifi and my signal strength during the calls are all good. It may be just me also, but the G2 mic may be quiet also because when I call my cousin he sounds like he's whispering to me but when I call someone else their sound is just quiet, but enough to hear it with a small bit of background noise. I haven't asked him how the sound was when I called him since it's something I just noticed.
Mine's a little soft as well. It kinda sucks that one of the few flaws with this phone is it's use as a phone, lol.
Sent from my HTC Vision using XDA App
Anartic said:
Yes, it's all of the calls that I make and receive. I'm never on wifi and my signal strength during the calls are all good. It may be just me also, but the G2 mic may be quiet also because when I call my cousin he sounds like he's whispering to me but when I call someone else their sound is just quiet, but enough to hear it with a small bit of background noise. I haven't asked him how the sound was when I called him since it's something I just noticed.
Click to expand...
Click to collapse
You sure the phone volume is up? Also have you called Tmobile about this?
I have had mine for a little over a month and it is loud and clear, I have no issues hearing anyone, and no one has issues hearing me... really good sound quality imo. I am on stock rom still. Speakerphone is very weak for me as well.
Yeah, in call phone volume is incredibly weak for me. Going to try to boot into stock and see what happens. Is there an app to make the volume louder? Or some way we can change it?
EDIT: Okay. Turns out that I am an idiot. Phone is still new for me so I left the default protective screen on. As soon as I took that off, phone calls were a lot more clear. Just ordered a proper screen protector so I just have to be careful until then haha. Don't know if this will help out anyone but hey, figured I let you guys know.
You know, the real problem with the G2 is HTC quality control on those. I'm on my second G2...the call volume is way lower than my first one...
also the keyboard is a LOT better on the second one, I didn't care at all about the keyboard on my first G2, as the keys were very recessed and didn't have a real "feedback", so I never used it. Made me think the whole keyboard thing about the phone was useless, now I'm in love with it.
My problem is the hinge on the second G2 is much looser than the first one.
If you bought yours recently, just exchange it.
Sk17z0 said:
You sure the phone volume is up? Also have you called Tmobile about this?
Click to expand...
Click to collapse
I'm positive the phone volume up. I haven't called T-Mobile yet because I haven't had time.
Ditto on the in call volume, would like to boost.
Anyone try this app Louder Volume Hack v4.1?
http://www.appbrain.com/app/com.AutoMod
I came from an HTC Aria and had the same in call sound trouble, then I tried Louder Volume Hack v3.6 but no luck, did not work.
Instead after some other searching I found a XDA forum that suggested turning on the TTY for the Hearing Impaired option in the Aria and waa-laa ---it worked. Apparently though, this TTY / Hearing Imparied option does not exist in the SOUND settings for the Z.
So, still looking for idea on the in call volume boost.
malloy0
Theres an app called DSP Manager on CM 6.1.1 that i used to up the voume a whole lot. It comes already installed when you install that rom.
My speaker works great except during a call. I can't hear a thing from it when on a call however. It must be a software issue, then. I started a thread a bit back, but with no luck. I hope we can find a fix.
my in ear sound isnt that loud either.
Ok...regarding the app called DSP Manager on CM 6.1.1, I checked into this, but is appears it only helps on the "media" volume but NOT the phone speaker or in call volume for when the phone is to my ear during a call.
Can you advise, is DSP Manager helping for this in call volume?
Ok...
I found 3 different versions of DSP manager and frankly am afraid to install w/o having a little more dialog with some of you that may be wiser than me.
The three files are attached and as listed are:
DSPManager120210_ALL.zip
DSPManager_080910.apk
DSPManager_100810.zip
The DSPManager120210_ALL.zip file came from this link and appears to the the latest
https://github.com/CyanogenMod/android_packages_apps_DSPManager
The APK file came from this XDA link
http://forum.xda-developers.com/showthread.php?t=750765
Anyway, after looking at the DSPManager_100810.zip file in unzipped mode, the file structure is different than the other zip file, which makes me a little nervous to flash uisng ROM Manager of Clockworkmod.
Meanwhile, I may install the APK file because I can easily uninstall if there is no improvement in the IN CALL VOLUME.
Any insights are welcomed.
Well I dove in and thank goodness for NAND backups...
Here is the deal (as of 12/31/10 4:05 PM EST):
- DSPManager120210_ALL.zip DID NOT FLASH
- DSPManager_080910.apk INSTALLED BUT NO CHANGE ON MY DESIRE Z A7275
- DSPManager_100810.zip FLASHED BUT NO EAR PEICE SOUND NOR SPEAKER SOUND
Now as of 12/31/10 4:11 PM EST in an restoring from my 12/31/10 10:00 AM EST NAND backup.
Gosh I hate doing this trial and error stuff, talk about a heart attack.
Will update after I complete my full restore and hope all is back in fully operational order.
==========================================================================
UPDATE....FULLY RESTORED 4:21 PM EST...PHEW!!
Thank you Koushik Dutta for clockworkmod!!!
malloy0 said:
Ditto on the in call volume, would like to boost.
Anyone try this app Louder Volume Hack v4.1?
http://www.appbrain.com/app/com.AutoMod
I came from an HTC Aria and had the same in call sound trouble, then I tried Louder Volume Hack v3.6 but no luck, did not work.
Instead after some other searching I found a XDA forum that suggested turning on the TTY for the Hearing Impaired option in the Aria and waa-laa ---it worked. Apparently though, this TTY / Hearing Imparied option does not exist in the SOUND settings for the Z.
So, still looking for idea on the in call volume boost.
malloy0
Click to expand...
Click to collapse
Google intentionally plugged this hole. Meltus isn't developing this app beyond Donut.
FallingEdge said:
Yeah, in call phone volume is incredibly weak for me. Going to try to boot into stock and see what happens. Is there an app to make the volume louder? Or some way we can change it?
EDIT: Okay. Turns out that I am an idiot. Phone is still new for me so I left the default protective screen on. As soon as I took that off, phone calls were a lot more clear. Just ordered a proper screen protector so I just have to be careful until then haha. Don't know if this will help out anyone but hey, figured I let you guys know.
Click to expand...
Click to collapse
I'm soo sorry bro, I luld Happy new year!

Volume+ semi-functional, still too low in-call volume

Initially, my nexus's speaker volume and incall volume are both really low even at maximum settings. After browsing around xda, I found people recommending volume+ so I paid $1.62 and got the full version. Speaker volume is loud enough now, although I feel the quality is not very good. I don't use speaker to listen to music so it's not a big problem.
There's also in-call volume setting in volume+. I set it to 90 and strange things happens: When I use skype, in call volume is extremely high, I can almost treat it like I'm on speaker. It feels like the settings are working. However, for regular calls, the in-call volume stays the same, still too low for most cases. I can only hear people in quiet rooms. I barely hear anything on a street. Setting in-call volume to other numbers doesn't change the result. So my result is volume+ is only semi-functional. Any other fix for in call volume?
In call volume is the only api not exposed so it cant be increased. Btw everyone goes for volume+ but equalizer by smart apps is free and i much prefer over volume+.
Anybody has any other ideas? Low call volume is really annoying
Still nobody? Everyone‘s incall volume is loud enough?
Basically what the guy above just said:
androidforums.com/showthread.php?p=3927479
Sent from my Galaxy Nexus using Tapatalk
Just did a test:
Removed in call settings
Speaker to +10
Called *611 (bell customer service) let the automated machine start talking..
Click volume down on rocker a few times then clicked volume up a few times and the sound increasef to am acceptable level.
However when i clicked up one to many times it almost mutes volume but the onscreen indicater is at max (found this odd).
Saw this on the thread you gave. I have the same situation. There exists a maximum in-call volume at around 3/4 of the bar. It's enough for regular use but still a bit low
low volume on calls
Still no one comes with a solution, the volume on the gnex is very low on call especially outside...thanks
luculuc said:
Still no one comes with a solution, the volume on the gnex is very low on call especially outside...thanks
Click to expand...
Click to collapse
I have the same problem using ZTE Blade... volume+ didn't work.
I think there solutions, many roms developer put on their changelog things like "in-call volume boosted" then I ask how you did that and no one anwers...
Anyway I did some research and I found on the rom i'm using a file named libaudio.so that says:
Setting in-call volume to %d (available range is 0 to 7)
Guess that for me increasing steps with volume+ only has efect until 7...
Maybe i'm being stupid... can someone with more experience analyse this?

[Q] Earpiece incall only volume boost

Is there a way to increase the volume of the earpiece when making/receiving calls? I want it a little more loud. But only the earpiece.
Thank you!
You can do it in call settings
Done that. Any other method? The phone is rooted
I m suprised that you need increase stock volume. I checked tyoday and I need decrease volume because my earpiece is so loude that anyone who is standing near me listen exacly what person on other side is talking about hehe
In noisy environments I want to be a little louder.
So I think that you can edit your mixer.path file and change value of dx 7 position if I good remember one is for loudspeaker and one is for earpiece maybe someone else can clearify but I think its DX 7 value
Settings
vibecatalin said:
Is there a way to increase the volume of the earpiece when making/receiving calls? I want it a little more loud. But only the earpiece.
Thank you!
Click to expand...
Click to collapse
What I'v found in my Xperia SP (might be the same in your device) is that I have eq and volume boost, so shouldn't be any problem.
I hope you're fine with this
Cheers!

Work around(s) for enabling top speaker for ringtones / notifications?

I as well as many other previous Nexus 6p owners have been noticing that ringtones / notifications only come out of the bottom speaker of the Pixel 2 XL. The irony of this is that any app besides the "Settings" app has all sound coming out of both speakers. Is there a program / workaround anyone knows of? I don't care if I have to root my phone; I want to use my dual front facing speakers!
Thanks,
~Mike
Too bad this apparently is not considered a bug, its just how its suposed to work. In my opinion its pretty dumb not to allow both speakers on incoming calls/notifications from Google.
I'm getting sounds out of both speakers when my phone rings. Not sure if this happened before I updated to 8.1, but I don't think so. Tested it with more than one ringtone, stock and custom. Now, my problem is the screen won't come on when the phone rings. I hope an update to the phone app fixes this soon.
Yes my also only the bottom one firing. Any solution?
Bumping this up, any solution?
Can someone please make a mod to enable dual speakers for ringtones?
Currently.. i am studying about sound mod on pixel 2 oreo 8.1.
My main objective is to fix the crackling issue.. btw.. i will look into this one too
showlyshah said:
Currently.. i am studying about sound mod on pixel 2 oreo 8.1.
My main objective is to fix the crackling issue.. btw.. i will look into this one too
Click to expand...
Click to collapse
wow......thank you bro....please find a way to enable dual speakers for ringtones.
shukero said:
I as well as many other previous Nexus 6p owners have been noticing that ringtones / notifications only come out of the bottom speaker of the Pixel 2 XL. The irony of this is that any app besides the "Settings" app has all sound coming out of both speakers. Is there a program / workaround anyone knows of? I don't care if I have to root my phone; I want to use my dual front facing speakers!
Thanks,
~Mike
Click to expand...
Click to collapse
I use a Tasker profile to get around this issue. Basically, I monitor the status of calls, and when the phone is ringing, I play my ringtone as media. Then as soon as the call is answered or ignored (offhook or idle), the exit task stops the media. I just set my actual ringtone in settings to "none". Other than that, it behaves exactly like a ringtone should. My task also matches the media volume to the ringtone volume while ringing, then restores the previous media volume setting. That way, if your phone is on vibrate, it won't still ring out loud. I can do a detailed write up on how I did it if anyone needs it.
ccoulterjg1 said:
I use a Tasker profile to get around this issue. Basically, I monitor the status of calls, and when the phone is ringing, I play my ringtone as media. Then as soon as the call is answered or ignored (offhook or idle), the exit task stops the media. I just set my actual ringtone in settings to "none". Other than that, it behaves exactly like a ringtone should. My task also matches the media volume to the ringtone volume while ringing, then restores the previous media volume setting. That way, if your phone is on vibrate, it won't still ring out loud. I can do a detailed write up on how I did it if anyone needs it.
Click to expand...
Click to collapse
That sounds like a great idea that I'd like to try. Can you please share that profile?
Like I said in other posts, sound does come out of both speakers with calls and notifications. When you're choosing a sound in settings, it does indeed only come out of the bottom speaker. I can't believe I'm the only one who has sounds coming out of both speakers when a call comes in. I've tested it with multiple sounds, too.
EMcTx said:
Like I said in other posts, sound does come out of both speakers with calls and notifications. When you're choosing a sound in settings, it does indeed only come out of the bottom speaker. I can't believe I'm the only one who has sounds coming out of both speakers when a call comes in. I've tested it with multiple sounds, too.
Click to expand...
Click to collapse
Confused with what you are saying. Are you saying that when you choose a ringtone in settings you no longer have it coming out of only the bottom speaker?
beezar said:
Confused with what you are saying. Are you saying that when you choose a ringtone in settings you no longer have it coming out of only the bottom speaker?
Click to expand...
Click to collapse
Yes. It only comes out of the bottom speaker when I'm picking the sound. When someone calls, I hear it from both speakers. I've tried this with both custom and system sounds.
JimSmith94 said:
That sounds like a great idea that I'd like to try. Can you please share that profile?
Click to expand...
Click to collapse
I have attached my prj.xml I have literally never shared a Tasker project so I hope this is sufficient! If you have any questions, let me know!
ccoulterjg1 said:
I have attached my prj.xml I have literally never shared a Tasker project so I hope this is sufficient! If you have any questions, let me know!
Click to expand...
Click to collapse
Thanks a lot! I've only used profiles and tasks in Tasker before, but your project imported just fine. All I had to do was change your task's ringtone to mine and set my phone's ringtone to none. Now to wait for someone to call me.
JimSmith94 said:
Thanks a lot! I've only used profiles and tasks in Tasker before, but your project imported just fine. All I had to do was change your task's ringtone to mine and set my phone's ringtone to none. Now to wait for someone to call me.
Click to expand...
Click to collapse
Awesome! Let me know if it works as well for you as it does for me!
ccoulterjg1 said:
Awesome! Let me know if it works as well for you as it does for me!
Click to expand...
Click to collapse
Yes it does and it's great! I figured out how to test it by calling my cell phone from Google Voice/Hangouts on my PC.
JimSmith94 said:
Yes it does and it's great! I figured out how to test it by calling my cell phone from Google Voice/Hangouts on my PC.
Click to expand...
Click to collapse
That's exactly what I did to test it! Glad it works!
ccoulterjg1 said:
I use a Tasker profile to get around this issue. Basically, I monitor the status of calls, and when the phone is ringing, I play my ringtone as media. Then as soon as the call is answered or ignored (offhook or idle), the exit task stops the media. I just set my actual ringtone in settings to "none". Other than that, it behaves exactly like a ringtone should. My task also matches the media volume to the ringtone volume while ringing, then restores the previous media volume setting. That way, if your phone is on vibrate, it won't still ring out loud. I can do a detailed write up on how I did it if anyone needs it.
Click to expand...
Click to collapse
Would love to see this!
Ring Volume not loud enough
ccoulterjg1 said:
I use a Tasker profile to get around this issue. Basically, I monitor the status of calls, and when the phone is ringing, I play my ringtone as media. Then as soon as the call is answered or ignored (offhook or idle), the exit task stops the media. I just set my actual ringtone in settings to "none". Other than that, it behaves exactly like a ringtone should. My task also matches the media volume to the ringtone volume while ringing, then restores the previous media volume setting. That way, if your phone is on vibrate, it won't still ring out loud. I can do a detailed write up on how I did it if anyone needs it.
Click to expand...
Click to collapse
ccoulterjg1 - please provide detailed instructions on how to get tasker profile to resolve the issue of the ring volume using the ring speaker configuration instead of the media speaker configuration, which should resolve the issue, as media volume is quite loud and ring volume is not (I need to be able to hear my phone ring when I am sleeping, and on-call).

Categories

Resources