WMODEM doesn't work - MDA III, XDA III, PDA2k, 9090 General

WMODEM application doesn't work when i press the START button in the application. there is no any NEW HARDWARE discoverd in Windows.
USB is already disabled in ActiveSync. All the document i can found said if i start the WMODEM on PDA, the NEW HARDWARE will be discovered. WHY i can't see any new device?
another problem:there is no BLUETOOTH option in my drop-down list in WMODEM.
By the way, i lost the CD. can anyone post the files relating the WMODEM, especially the files at PC end. etc. usbmodem_dialer.exe
i am using O2XDA2s, ROM 1.40.00 asia. RADIO1.12.00

Related

1.40.00 Asian WWE O2 ROM GPRS Glitch

I found a glitch I've been trying to work around. I use an XDA IIs from O2 with the current Asian WWE O2 ROM in English ;-). Well if I connect to GPRS and use the internet for whatever amount of time I need it for, and disconnect, connect again, and disconnect, it will eventually freeze up the connection when I try to connect again. Either way after like 3 GPRS usages I must softreset in order to connect to GPRS, anyone have this same problem? I would like WM5 but I've upgrade and downgraded 4 times, its just not for my phone, its too slow even with overclocking.
i had the same problem~
and found this as the solution from somewhere in the search
PeterW said:
Here is a step by step instruction:
1. Download the older version of caller-id from:
ftp://xda:[email protected]/BlueAngel/CAB_Files/Caller ID/IA_CallerID_1.20_WWE.CAB
and transfer it over to your device. Any directory is OK. I used ActiveSync to put it into the My Documents folder.
2. Remove the file IA_CD-Startup.exe from \Windows\Startup on your device.
3. Rename iacontacts.dll to something else (e.g. old-iacontacts.dll). This file is in the \Windows directory of your device but is hidden. However you can rename it using your PC. Open Windows explorer, and navigate to Mobile Device>My PocketPC>Windows.
4. Rename displayCID.dll to something else (e.g. old-displayCID.dll). Access it via your PC the same as for the previous step.
5. Soft reset
6. Run the CAB file on the device - just tap on it.
7. Soft reset.
That should do it.
- Peter
Click to expand...
Click to collapse
Hi there,
I posted a problem today that doesn't sound quite like the one above.. but maybe it is... please read my post (don't want to make a mess by posting here too) and let me know if you think the caller id could the issue.
Thanks.
http://forum.xda-developers.com/viewtopic.php?p=181358
Hi there,
following my reply on the other thread, I found this one & followed the instructions. Since then I can always connect & disconnect GPRS and never need to use flight mode to re-activate GPRS
weasel said:
Hi there,
following my reply on the other thread, I found this one & followed the instructions. Since then I can always connect & disconnect GPRS and never need to use flight mode to re-activate GPRS
Click to expand...
Click to collapse
So far... soooo good. Strange that caller id would cause the issue. I also downloaded a "Keep your GPRS connection alive" app from another posting. That may be helping as well. Either way, no headaches thus far.
Thanks!

Cab Operator settings

Hello :
What do i have to do to put this mms and internet configs atached working on wm6 ? They are from wm5,
Thnks
Copy on your device and than execute the cab file...
Regards,
Primoz
they didnt work..already have done...
Cab to PPC From Windows XP
You don't have to copy the cab to PPC to install the program. You can use this small utility to do the process just like you'll do with .exe files installer.
This utility is posted by Ryubai to PXDXA .
How to:
1. run the command xp_install.cmd inside the cab2PPCfromXP.zip archive to install the utility as a context menu command.
2. when you right-click the cab file,you will see "install to ppc" in contextmenu.click it and a dialog with which you are very simillar pops up......then you know what you should do next.
TQ.
cyphol is there any way to make CAB files like this for any operator?
Regards,
Primoz
Pc78 said:
cyphol is there any way to make CAB files like this for any operator?
Regards,
Primoz
Click to expand...
Click to collapse
There's always a way but you have to know the registry keys involved but I think there're many already floating around in this forum so you can try search for them.
Eh...for the Slovenian operators there are no CAB files...thx anyway
Regards,
Primoz
Hi, i've just upgraded to WM6 (Black Edition v1.1) without any trouble but i can't connect to the internet via internet explorer, i get the message 'cannot connect'. I've download all cabs (extRom and windows) and ran them all. I've downloaded cab2PPCfromXP.zip and ran that on the PC as described, although nothing much happens.
I have noticed after running t-mobiles cabs that instead of '3G' i now get 'E' which seems a step back.
If i Hard reset my device, can some give step by step directions to me having a normal UK T-mobile phone. I mainly use my phone for emails so i really need this side to work.
Cheers
cyphol said:
There's always a way but you have to know the registry keys involved but I think there're many already floating around in this forum so you can try search for them.
Click to expand...
Click to collapse
I am currently in the stage of making cab files for all the operators, please PM me your carrier settings, aswell as mms settings, and your carrier name.
I will make a cab for that operator.
johnk1973 said:
Hi, i've just upgraded to WM6 (Black Edition v1.1) without any trouble but i can't connect to the internet via internet explorer, i get the message 'cannot connect'. I've download all cabs (extRom and windows) and ran them all. I've downloaded cab2PPCfromXP.zip and ran that on the PC as described, although nothing much happens.
I have noticed after running t-mobiles cabs that instead of '3G' i now get 'E' which seems a step back.
If i Hard reset my device, can some give step by step directions to me having a normal UK T-mobile phone. I mainly use my phone for emails so i really need this side to work.
Cheers
Click to expand...
Click to collapse
It's sometimes about wrong configuration of mobile ops settings you entered into the PDAs. So, make sure that everything typed in is correct.

Windows Vista, WM6, and Tethering

Ok I searched on the forums hard for this one so forgive me if this has already been answered. I see to find people with Windows Mobile 6 and Windows XP or people with Windows Vista but Windows Mobile 5.
Since I'm running Vista, I use Windows Mobile Device Center instead of ActiveSync. The functionality of the program is fine, so I have no complaints. However, to upgrade ROMs or anything...I use an XP Machine as it seems Vista seems to think the device disconnects upon the loading of the bootloader. I've read somewhere in the forums that there is a driver update to fix that, but after applying...WMDC doesn't work properly...so I'd save the trouble and use a machine that has XP running instead until a better fix comes along.
My 8525 came stock with a program called Wireless Modem as of ROM 1.34.502.1 shipped, which seems to have been replaced by Internet Sharing.
The Wireless Modem application worked fine after setting up the modem with the Vista driver also found in the forums. I also tested the bluetooth connection and set that up to tether as well and it worked fine.
I finally decided to upgrade after days of reading and I tried to use the Wireless Modem feature. I noticed it wasn't there and tried to use Internet Sharing. The layouts are similar...but when I hook up the phone under USB, my computer doesn't even recognize it as a new device (modem) as I did uninstall the last driver.
When connected via Bluetooth, it recognized the device and installed the driver as Windows Mobile-based device support by default. Under services, only Active Sync is only available...as opposed to before when I had Dial-Up networking available. When I set up a PAN, the computer and device are connected together, however I do get the same problem as some others with a connection that is limited or local only. So the tethering is unsuccessful.
I recently upgraded my Cingular 8525 to WM6BE v1.2 (Cingular Edition)...which I can't seem to find in the threads anymore. I'm also running Radio 1.38.00.11...but I don't think that would affect anthing. I reverted back to my shipped ROM to check for alternate settings that might have helped...then I was going to revert back to WM6BE v1.2 Cingular...then I realized I accidently deleted that custom ROM and I couldn't find it anymore. I was stuck putting on the WM6BE v1.2 on the sticky thread after which forced me to reinstall the data settings/keyboard fix from the cab files. Haven't had problems with them but I did like that customized ROM for Cingular a little better considering I really like "clean" ROMs.
Anyway, I'm attempted to connect via MEdia Net AND Cingular GPRS settings provided by the Cingular Data Settings cab floating around the forums. It works fine it seems...it just seems like the problem is getting Vista to recognize the device as a modem, or at least having modem capabilities.
I guess thats as detailed as I can get right now. Hopefully someone can help now ^_^
You are right. I tried updating rom on Vista's Windows mobile Device and end up damaging my xda2i. The device displays "USB" when connected to cradle and "Serial v1. 01" when not. Do you have a solution apart from upgrading?
Solution on Vista
Hello Guys, I'm running vista too and I bothered 2 hours before getting it done.
So this is one of the "Step-By-Step Instruction Guides".
0. Extract the attached file into a directory of your choice
1. Disconnect your Device
2. Goto Settings > Connections and choose "USB To PC"
3. Uncheck the option there
4. Reconnect your Device
5. Goto your DeviceManager and search for "HTC USB Sync", double click it and choose Drivers
6. Click on the "Update Driver"-Button and choose search on the computer
7. Click "Choose a driver from list..."
8. Click the button to the right (Open from Media)
9. Choose any INF File from the extracted ones.
10. You're done, upgrade your ROM.
11. To Rollback drivers, use the "Automatic Update" instead of Manually selecting (it will choose the newest ones)
12. Recheck the option of step 2 unless you're planning to use the slow variant.
Have Phun and Good Luck
Have I understand right? With this tweak We will be able to applied ROM upgrades to our HERMES from windows VISTA?
Confirmed.
I did already update my ROM in this way.
Cheers,
soniX
EDIT:
Please use HardSPL or something equal to be sure the risk is at a minimum.
And I can not be held responsible for any damage to your Hermes or your Brain
But as I said, for me it worked perfectly, remember to Restore the new Drivers or the Mobile Device Center will not work.
Hmm I don't think you people understand what I was asking...
I already know about that method to update with Vista...I actually tried it yesterday and for some reason it didn't work so I just use an XP Machine for now...but I was just asking merely about TETHERING.
I already have the ROMs of my choice loaded on my device.
In simpler words: How do I go about tethering (Running Internet Sharing) when my computer does not recognize the device as a modem...through USB or Bluetooth.
I'm running WM6BE v1.2 and Windows Vista Ultimate.
Maybe its Wm6BE, but I have used all the other roms (xda live, des, lsvw) and all I do is plug in the usb, start internet sharing and it connects no problem. Have to start internet sharing before wmdc starts. Internet Sharing works great, better than wireless modem. I was not able to use the WM6be due to problems with sbp pocket plus. I am currently using XDA live .30 and Vista Ultimate.
Does the technique in the post above work??
Also once that procedure is carried out can rom updates and RUU programs be used exactly the same as on XP??
If anyone is available to do some screenshots for me for an updated GUIDE, please PM me (i dont use or have a copy of vista )
I enjoy the community so I think I'll do my best to contribute to it. When I get the chance, I'll try to make a guide with screenshots on using Windows Vista and loading WM6.
I'm going to try to switch to LVSW build with his new update today and I'll see how that works out.
I REALLY like the one custom build someone made (I forgot who) with the Cingular connection settings defaulted from the Cingular Shipped ROMs...I wish I can find those files again.
It seems like the people developing the new Cingular data connection cab files are really working hard at getting the default settings as if they just bought their phoes straight from Cingular.
I'll let you know how LVSW goes with Internet Sharing and Windows Vista
sonixwarrior said:
Hello Guys, I'm running vista too and I bothered 2 hours before getting it done.
So this is one of the "Step-By-Step Instruction Guides".
0. Extract the attached file into a directory of your choice
1. Disconnect your Device
2. Goto Settings > Connections and choose "USB To PC"
3. Uncheck the option there
4. Reconnect your Device
5. Goto your DeviceManager and search for "HTC USB Sync", double click it and choose Drivers
6. Click on the "Update Driver"-Button and choose search on the computer
7. Click "Choose a driver from list..."
8. Click the button to the right (Open from Media)
9. Choose any INF File from the extracted ones.
10. You're done, upgrade your ROM.
11. To Rollback drivers, use the "Automatic Update" instead of Manually selecting (it will choose the newest ones)
12. Recheck the option of step 2 unless you're planning to use the slow variant.
Have Phun and Good Luck
Click to expand...
Click to collapse
Also, I've seen this guide posted twice...yours missing one step where I was supposed to "End WMDC.exe Process in Task Manager"
I still can't get Vista to run RUU...do you run the RUU with your device in Bootloader? I think I even tried that once and and still couldn't get it to work with the older Driver.
Not exactly sure what I'm missing or doing wrong...but its definitely after I install the driver. It acts as if I didn't install it at all, even if I check in drive details and its all correct in there.
i tried the method above for upgrading in vista and it didnt work for me...
what am i missing?
Where is it stopping?
Because I did it once, it has to work.
Where is it stopping? - At the bootloader (LSD-Screen with psychedelic colors ?) - or before ?
I will do an upgrade in the afternoon again and this time i will record ALL of my steps.
Hopefully I'll find the recept for the cake.
Cheers,
soniX
Yea it gets to the bootloader screen and I'm stuck as if I never loaded the AS4.5 drivers.
Sorry, too less time today for a screenshot-decorated guide.
I just upgraded my device again (only to proove it does work).
So here is again a guide, which differs to the first one.
I guess there are two ways to do this...
Prequesites:
- Search my previous post and download the USBAS.zip-File
- Extract it into a directory...
- You'll need your device and it has to be connected, too
The first approach:
Change the Serial-Driver
- On the device click Start > Settings, choose "Connections" there and click on "USB to PC"
- uncheck the item for "Enhanced..." there
- Click on OK.
- Now goto your Device Manager.
- Search an Item named "HTC USB Sync".
- Right-click it and choose "Update Driver".
- Choose the second option, then select to choose manually
- Select the directory where the zip has been extracted to and choose any inf file.
Start the Update-Tool
- After the driver-update you need to set the device back to RNDIS-Mode (follow Step 1 and recheck the option)
- Verify that you're running the correct drivers for the RNDIS-Device, the date in the device-manager has to be around January, 17th 2007.
- Start the ROM-Upgrade.
- It should work now.
For me it did not really work to switch from RNDIS to USB-Serial drivers in my localized (thanks bepe for the great work!) german WM6.
So if you have a problem with the first method use this one.
- Start your Device-Manager, we have to be very fast.
- Start the ROM-Upgrade as you've probably done before
- If the bootloader starts up, you'll notice a device/dettached,device/attached sound, this is your sign, goto to you Device-Manager.
- Search for the Entry "HTC USB Sync".
- Update drivers like it's written above.
- If it won't work and the upgrade tool dies with "cannot connect", don't worry. Reset your device (soft) and try again, this time you should not need to update the drivers.
Cheers,
soniX
I'm using XP and a USB cable. USed to work OK before upgrading to WM6 Black but now I get Error 797 on the PC saying modem not found or busy!
mrvanx said:
Does the technique in the post above work??
Also once that procedure is carried out can rom updates and RUU programs be used exactly the same as on XP??
If anyone is available to do some screenshots for me for an updated GUIDE, please PM me (i dont use or have a copy of vista )
Click to expand...
Click to collapse
Take a look here
Code:
http://www.modaco.com/index.php?showtopic=252977
For Vista guide with screen shots, so far i've only flashed HardSPLv4 from inside Vista, but it worked i'm still plucking up enough courage to do a full flash of WM6
Nic
I do this (for Hard-SPL, don't know for other):
I have made what it was written on modaco (http://www.modaco.com/index.php?showtopic=252977), but
1) I was not in bootloader.
2) While active sync try to connect (but it does not succeed because they are not its driver) I've stopped WMDC.EXE and now hermes is connected.
3) NOW I do a flash.
If there is something that is not clear you say it to me.
My method also works (for me)
Can somebody confirm that my method works for vista?
soniX
I'm based also to your method, but it would be more complete to integrate it with the method on modaco.
It seems that most people didn't get the point of this thread...weird considering I put TETHERING in the subject line. However, it is nice to see people trying to help others with Vista to flash. I have the same problem myself but access to machines with XP nullify my real need for flashing on Vista for now.
I'm about to reinstall LVSW's latest ROM set for the billionth time and I'll try out tethering on that. It seems that people who were on WM6BE were having a hard time with Internet Sharing. I'll load a new rom and let you know how it goes.

WM6.1 & Modem Link -Need BIGTIME help

I do helpdesk support and I am on call frequently. We use PCanywhere to connect to our clients servers.
When I had WM5 I could just click modem link and choose activate, open PCanywhere, right click my remote & go to properties, select HTC USB modem.
PCanywhere would then use my phone as a USB modem and connect to the remote site. Now I am using Faria's 6.1 (which has the WM5 modem link & internet sharing) and I can not use my hermes as a modem no matter what I do.
All of the directions I have found are how to tether/internet via modem link. I want to use it as an external modem. Please Please help if you have been through anything like this.
oh yeah, FYI I am able to tether via internet sharing just not use the hermes as an external modem.
Hi,
are you looking for the Modem Link/Internet Sharing?
If yes, use the attached cab files.
wfg
starbase64
Thanks for the reply. I already have Modem link and internet sharing built into the faria clean 6.1 ROM. My issue is that it no longer works like it did in WM5.
I am trying to use my hermes as a modem for my laptop to connect to a remote modem via PCanywhere.
Maybe its the ROM! Did you try this with any other ROM's?
I have not tried it with another 6.1 rom but it worked with the factory wm5 rom. I love this ROM and I am trying to hold off on trying another one until Schapps comes out with his new one.
Oh well for now I am pulling a rube goldberg. I am tethering using internet sharing and then aventail vpn into my network, then vnc into a desktop here, then using PC anywhere to connect to my remote server.
How did you get pcanywhere to install on WM6.1? I have dcd's rom and pcanywhere v3.0 will not install, only v2.0 will.
Can you offer any help?
I gave up. I now just use Logmein and use my desktop to connect to the pcanywhere host.
Though the topic is almost two years old, it still serve my purpose today! Thanks a million for the cab files (HTC modem Link and internet sharing)
configuring both the laptop and the cellphone for the Internet connection, and finally, initializing the connection. Once you’ve completed steps 1 and 2, you’ll never have to do them again. The next time you want to access the Internet with your cellphone you simply “redial,” and you’re online. This particular setup is based on the HTC manufactured series of windows mobile devices. In my case I still use the now-ancient HTC Cingular 8125, however these steps work for the later models (and most Windows Mobile devices will also be similar).
Step 1: Getting Things Ready
The first thing that you need to do before you can establish a laptop/modem connection is to kill the current application that’s handling communications between your laptop and cellphone. In my case, I’m running ActiveSync, so I kill that process using the Task Manager.
laptop wireless internet access
For ActiveSync, you just find wcescomm.exe and kill the process. If you’re particular Windows Mobile device uses another application, you’ll need to find the process name and make sure that you kill it. Secondly, you’ll need to also shut down the communications software on your phone. In the case of ActiveSync, in Windows Mobile you go to Start -> Settings -> System -> Memory -> Running Programs, and then if ActiveSync is listed you’ll need to stop the process.
mobile internet
Once you’ve stopped the communications software on both the laptop and Windows Mobile phone, you’re ready to establish the connection between the laptop and phone as an Internet modem.
Step 2: Connecting The Cellphone As a Modem
The only real configuration required in Windows Mobile in order to set up your device as an Internet modem is to enable the “Modem Link.” The Modem Link configuration can be found by going to Start -> Programs.
mobile internet
Once you’re inside the Modem Link configuration, just change the Connection setting to USB. It’s likely that your other settings are already configured, however if they are not just make sure that the Access point name has the name of the connection you configured on your mobile device for Internet access. When everything looks good, click “Activate” at the bottom, and the “Status” at the top should change to “Active.”
mobile internet
If your device is already connected to your laptop, you’ll get the “Found New Hardware” wizard pop-up immediately. If you’re not yet plugged in, then now’s the time to do it.
wireless internet for laptop
Just make sure that you select to install from a specific location so that you’ll have the option to manually select your driver file. Click next.
wireless internet access
On the next screen, you’ll click the browse button and go to the folder where the driver file is located. In my particular case with the Cingular 8125, and for most HTC mobile devices, you’ll need the USBMDM.INF driver file as well as the HTC USB Modem Dialer application. Both are offered as a free download from xda-developers.com. Download the zip file and put them wherever you’ll remember. Then in the Windows Wizard screen above, browse to the directory where you extracted the INF file. If your Windows Mobile device is non-HTC, check with the manufacturer for a USB modem driver for your device.
laptop wireless internet connections
The Wizard will recognize the device. Depending on your particular device and the version of the driver, you may see the error message above. Just click “Continue Anyway.”
wireless internet connection
Finally, the driver’s installed and you’re ready to start using your new Mobile USB Modem anytime you want to, and anywhere you have a cellular signal!
Step 3: Initializing the Internet Connection
To establish your new mobile Internet connection using your laptop, run the executable that you downloaded from the link above. Regardless of your device or your cellular carrier, you’ll typically always need to enter a User Name and Password. You can access that information (if you don’t already know it from setting up Internet use on your mobile device) by contacting your cellular provider and asking for the User Name and Password to use with your Internet data plan.
wireless internet access
Enter those details into the USB modem dialer, and after a few moments it’ll inform you that you’re now connected. Yes, that means that at this moment, even while you’re sitting in the middle of the lake with a fishing pole in one hand, your laptop is now connected to the Internet via your cellphone signal. It may not be lightning fast – but when you’re desperate to submit your latest article (or check on your team’s latest game results), sometimes such a connection is all you need.
http://www.makeuseof.com/tag/how-to...ternet-access-through-your-cellphone-windows/
Modem Link: http://attachments.xda-developers.com/attachment.php?attachmentid=90454&d=1212623870
Usb Modem: http://forum.xda-developers.com/attachment.php?attachmentid=27020&d=1142937864
Internet sharing: http://attachments.xda-developers.com/attachment.php?attachmentid=90453&d=1212623870

[SOLVED] WinMo 6.5.X acting like 6.1 - cannot enter in menus

Help, I did something wrong and I sort of cant use the phone anymore.
I installed a topbar. Unluckly I didn't read the info about it, and that it was made for Win 6.1.
I cannot access the menu, thus I cant uninstall the topbar or hard-reset my phone. There's a key combinatiou that's "Camera + Send + Power Button" that resets it. Problem resides there; My cellphone have a touch sensistive Send button, and this instruction is for a similar phone which possess a hard Send button. I can still, however, make calls and answer, send SMS's and read emails and activate bluetooth or wifi, but I can't start any app (I cant open the menu) or use the Mobile Device Center to do anything through USB (I've set it to connect directly as USB Mode and not to ask), I'll look for a Bluetooth dongle today to try to connect it through bluetooth.
I'm desperate. This phone is brand new but I already have made esthetical and hardware changes, so I've voided the warranty. Also that's a China phone, even though this particular model is able to update the ROM, I don't have the original ROM or knowledge to backup the actual one.
Any help is accepted. If there's any trick to go into "Add/Remove programs" without accessing the menus or to use some software hack to hard reset it thru Bluetooth or Wi-Fi, I'll be glad to know. If that's for any usage, I have Total Commander installed on this phone and I know how to edit the registry, but I can't start it.
Sorry for my bad english, I'm from Brazil
Thanks in advance and I'm really counting on you guys.
I'll be awaiting for an answer.
P.S.: I've been thinking - I don't know - about installing SPB Shell with some Auto Installer by the Mobile Device Center (over bluetooth) and let it start automatically, and by there, uninstall the culprit. Fiddling around, I've learnt how to trick the Mobile Device Center to make it install any CAB automatically, as if I've ran an auto-installer. My question is: would SPB Shell start automatically?
P.P.S.: Everything is working if I find another way to start it. Just the "start menu" died.
P.P.P.S.: No, I can't buy another phone. It's expensive here.
You can try MyMobiler, a PPC controller running on PC.
OR Try to remove it in Mobile Device Center if you can connect to it.
I don't have Mobile Device Center, using ActiveSync in win Xp but I believe you can remove on your Pc the partnership with your phone so next connection will start a new partnership where you can change the settings which prevent you from connecting Usb normally. Once you are connected, copy the file attached to your device, then take blackppc's advice, install MyMobiler http://forum.xda-developers.com/showthread.php?t=499344 and navigate to the file, execute and it will open settings where you'll find remove function.
I hope it helps
That's the problem, I can't connect it through USB to Mobile Device Center because I've set it to autostart as "pendrive" and not ask me about if I want it to start like this or in Mobile Device Center compatibility..
I'll buy a Bluetooth dongle in 5 minutes by now and I'll tell ya what happened
--
I.. er.. bought the dongle, but I cannot configure it. It cannot find any of my devices or enter the dongle's configuration area. It works well enough, though, on the store computer. I've tested thru 2 Windows 7 Computers and it gave me the same error.. gosh
As I said, I don't have Mobile Device Center but there must be a way to delete partnership with your device... Try this link http://technet.microsoft.com/en-us/library/cc722321(WS.10).aspx or google these keywords "delete partnership Mobile Device Center" and see how.
Alright, I've managed to get the bluetooth dongle working (a Bluetooth service was disabled). Now I need to connect the phone to the Mobile Device Center. Problem is that I had connected it to MDC, but I had hard-reseted then, and seems like MDC finds the phone as a "new device", thus cannot connect over bluetooth. Can I force it to connect or something? I'm thinking that may be my only shot.
P.S.: I can access a sort of device explorer (when I put the USB cable in and out, it pops up a message asking if I want to see the Memory Card images, and then it opens a image viewer. I can delete folders from there, if that's of any use)
tito12 said:
As I said, I don't have Mobile Device Center but there must be a way to delete partnership with your device... Try this link http://technet.microsoft.com/en-us/library/cc722321(WS.10).aspx
Click to expand...
Click to collapse
"On the mobile device:
If you have never attached your device to the computer using a USB cable, do so. After Windows Mobile Device Center starts, disconnect the device.
In ActiveSync, click or tap Menu, then click or tap Connect via Bluetooth."
I cant reach it
I've got an GREAT idea: I can, still, acess the image viewer. From there, I can copy and move folders around. So, all that I have to do is to create a folder in my memory card called "Start", with one shortcut inside, leading to the "Add/Remove programs" or "Hard Reset" program and copy it to the Windows folder. Then I restart the phone and it'll fire up the selected app. JOB DONE.
I only need to know the name of the app/parameters for Add/Remove programs or Hard Reset. Basing on what Windows is, it might be some "xxxx.cpl -command".
I leave this job for you guys, now I feel that I can still save my phone!!
I'll try link it to Total Commander first, before anything
P.S.: I've found the following string to invoke the "Add/Remove programs" for Windows Mobile 6.1
"#ctlpnl.exe cplmain.cpl,23?\Windows\shell.dll,13"
Would it work for windows 6.5?
P.P.S.: Meh, I cant create fake shortcuts that leads to nowhere on the local computer. How can I do it?
What a relief, God truly knows. My method worked. I can invoke anything from the phone using a shortcut. I've used the following line for the shortcut:
"33#ctlpnl.exe cplmain.cpl,10"
It invoked the "Add/Remove programs"
Thanks for the help, I really felt you guys tried to help me
I never seen a case like mine, but who knows.
Here's what I did:
- Connected the USB Cable into the phone, and it started as a pendrive
- Created a folder inside the phone called "Start"
- Created a folder called DCIM and added some images in there
- Created a .lnk file using XXMKLINK (which makes links from anything I type)
- Copied the .lnk file to the "Start" folder
- Unplugged the USB. At this moment, a popup appeared on the screen "Do you want to view the images?" Press yes.
*If the above method doesn't work, you can try going into a SMS message, then click for "Insert a Picture". The same browser will open
- Go to the root of the SD Card, or anywhere the "Start" folder you've created is
- Press and hold it, select Copy
- Click on the left side button and select "Device"
- Go to Windows folder. It takes a while to open
- Copy your "Start" folder inside. Press Yes on any prompt
- Restart the phone.
Voilá! The app will be run on the next startup
I really hope to help someone with this trick, who knows more than it helped me.
The topic can be closed at any time.
Great news

Categories

Resources