I don't sure if it's my problem or the ftp site problem. I download all the CHT roms all of them have "error 123" except "XDA_IIs_Chinese_CHT_1.31.00_ ExtRom_1.31.900_Radio_1.08.00.rar" which can't work after installation. Can anybody check it? BTW does anybody know where i can download a working BA and Alphine CHT rom? Cheers
First you need to find out what XDA you had and read wiki and follow up with upgrade than you can go.
Related
http://www.romupdate.ru/index.php?option=com_remository&Itemid=27&func=fileinfo&id=114
To download, you need register on this site.
RUU_Prodigy_2080701_101_11310_Qtek_WWE_Test.exe
Engish ROM or someother language
I think this rom is not in english
dont the WWE at the end of it mean world wide english
I don't understand Russian so don't know how to download/register. Can someone who does, upload the test rom to the XDA FTP?
thats the problem im having i tried putting it through google
to see if it would translate the page but said was unable to
display any information
x_jane said:
http://www.romupdate.ru/index.php?option=com_remository&Itemid=27&func=fileinfo&id=114
To download, you need register on this site.
Click to expand...
Click to collapse
Hey, Mr. X_JANE,
Could you upload it to the XDA DEV FTP?
this is for the prodigy not for Qtek 9000. i downloaded it and tried but it doesn't install on my qtek 9000.
As a matter of fact there are no nbf files in it ?
I will upload it now
Very strange rom... I dont now, is this rom for qtek 9000?
I think, this is not Qtek rom...
There is 1 nbf file which is nk.nbf 72mb when extracted
is anybody brave enough to try it
I try... Not install
It's for the prodigy.
Check the link yourself:
http://www.romupdate.ru/index.php?option=com_remository&Itemid=27&func=select&id=49
I tried to install but again unsuccessful...
The installation screen shows no ROM version to be upgraded.
When you look at the README note, it uses the WIZARD device so it may be for WIZARD instead.....
This is wizard rom... Mistake admin of site... :?
I am looking for the htc p3350 wwe factory rom ( wm5 )
( Not available on htc support site )
Does anyone know where it can be found ??
I need the same rom, anyone can help me?
The only reason I knew this is cause I am about to get this phone and researching the heck out of it on the internet. Good luck
HTC P3300 Factory ROM
P.S. This thread might help too.
http://forum.xda-developers.com/showthread.php?t=308242
I want it too
I don't know why htc hasn't uploded it on thier site
hi, i'm beginner so i question: why search the wm5 if now we have the 6.1?
very glad to give u link...
because i tried it for 2 days....
finally found....
ftp://upload_user:[email protected]_INFINEongsm4.1.13.30_02.69.90_Cmp_Ship_R.exe
it's WM5 for P3350/M700
Found the another link which is working
Hi,
I did tried the links but it was dead.
I did further search and found another link which is working tested the same with Dopod M700.
The links i tried to post it didn't allow me, so i put the links in attachment.
Kernal81
kernal81 said:
Hi,
I did tried the links but it was dead.
I did further search and found another link which is working tested the same with Dopod M700.
The links i tried to post it didn't allow me, so i put the links in attachment.
Kernal81
Click to expand...
Click to collapse
you can go to download it at http://www.shipped-roms.com/index.php?category=windows mobile&model = Artemis
Good Luck
Does anyone have a link to the official WM6 O2 rom? O2's site doesnt list it anymore and the wiki doesnt mention it at all. Thanks.
EDIT: pls delete, found it.
efjay said:
Does anyone have a link to the official WM6 O2 rom? O2's site doesnt list it anymore and the wiki doesnt mention it at all. Thanks.
EDIT: pls delete, found it.
Click to expand...
Click to collapse
Have you tried the this link - its where i got my ROM from
http://www.my-xda.com/software_updates.jsp
I'm looking for the latest dopod rom. I found a thread where it had a link to get the latest dopod rom for the C730/x02ht/S730 but i can't seem to find a working link. >.<
ftp://ftp.xda-developers.com/ <--- this is the link i can't access Any help would greatly be appreciated.
poy said:
I'm looking for the latest dopod rom. I found a thread where it had a link to get the latest dopod rom for the C730/x02ht/S730 but i can't seem to find a working link. >.<
ftp://ftp.xda-developers.com/ <--- this is the link i can't access Any help would greatly be appreciated.
Click to expand...
Click to collapse
try clicking THIS
poy said:
I'm looking for the latest dopod rom. I found a thread where it had a link to get the latest dopod rom for the C730/x02ht/S730 but i can't seem to find a working link. >.<
ftp://ftp.xda-developers.com/ <--- this is the link i can't access Any help would greatly be appreciated.
Click to expand...
Click to collapse
If you would read "WIKI" than you would not have any trouble conecting to ftp.
Cheers
for some reason it won't work then again i'm flustered at the fact if there is a dopod rom on my softbank it would work but i get error 294 thats the id is invalid
actually what do u want to do??? flash a dopod wwe on ur non dopod dev?
try doing SSPL (JumpSPL) & HardSPL first then flash
Please find attached a SSPL (also known as JumpSPL) for Cavalier. Running it will allow you to flash a HardSPL. The HardSPL is a SPL (bootloader) which can not be overwritten and which allows you to flash roms (both official and cooked roms) and rom parts (radio, OS, splash, etc). If you want to replace the HardSPL you must run the SSPL again and then flash another SPL.
Click to expand...
Click to collapse
Hi at all,
i just tried to flash my XDA Diamond with following ROM:
SUN Y 1.2 WM 6.1 - Manila 2.5.1921 by Kisja
Inside the extracted file a find the .NBH file, CustomRUU and PagePool_Changer.
So i don't know what to do with the PagePool_Changer, think i don't need it.
I tried to flash my XDA with the CustomRUU, when i open this, a PDA Update Utility vers. 3.27.4.3 will be started. I followed all the steps, then it started to flash, but it stays at 0%. Then it tells me to recover..so i did.
Then i tried it with the Signed and Unsigned HardSPL-Diamond-Olinex...same thing -.-
So i flashed SPL-1.30.OliNex on my phone, checked if it was on my phone and it is.
After that, i tried all the things from above again but it didn't help.
So what do i do wrong? It can't be so difficult to flash a ROM can it?
Thx 4 ur help
PS: If u wanna help me quiet fast, my icq number: 495445657..thx^^
i try this rom and its running with no probleme
Inv1ctus said:
Hi at all,
i just tried to flash my XDA Diamond with following ROM:
SUN Y 1.2 WM 6.1 - Manila 2.5.1921 by Kisja
Inside the extracted file a find the .NBH file, CustomRUU and PagePool_Changer.
So i don't know what to do with the PagePool_Changer, think i don't need it.
I tried to flash my XDA with the CustomRUU, when i open this, a PDA Update Utility vers. 3.27.4.3 will be started. I followed all the steps, then it started to flash, but it stays at 0%. Then it tells me to recover..so i did.
Then i tried it with the Signed and Unsigned HardSPL-Diamond-Olinex...same thing -.-
So i flashed SPL-1.30.OliNex on my phone, checked if it was on my phone and it is.
After that, i tried all the things from above again but it didn't help.
So what do i do wrong? It can't be so difficult to flash a ROM can it?
Thx 4 ur help
PS: If u wanna help me quiet fast, my icq number: 495445657..thx^^
Click to expand...
Click to collapse
Choose a different HSPL, go for 1.40 or 1.93. I had the same problem.
Could you please tell me exactly what you have done?
Every step and which SPLs you used?
Did you only use the CustomRUU from the download file?
That would be very nice
Otherwise i am about to desperate
sraaj: okay, i am going to try it right now^^
I could write my version, but if you look at sticky number 3, that has everything. I followed it and it worked just fine....
http://forum.xda-developers.com/showthread.php?t=416211
just that 1.30 did not work, so I used 1.40 which is in the post above... also i hope its not CDMA, since the above is for GSM models..
Could anyone give me a link to download HSPl 1.40 or 1.93 please?
I seem to be too stupid to find another one than 1.3
Edit:
Well, i now found a 1.93 and a 1.40 but they seem to be the same as my 1.3
Does anyone have a link with the version i need?
2. Edit:
I found an 1.40 .... finally
so now i try it again
It is updating right now, with HSPL 1.40..oh guys i hope so much that it works in the end
.....And did it work?
So now it's done.
It works
The Problem was that i tried to flash with HSPL 1.30 and not with 1.40
With 1.40 it worked fine
Big thanks for your help guys
Inv1ctus said:
So now it's done.
It works
The Problem was that i tried to flash with HSPL 1.30 and not with 1.40
With 1.40 it worked fine
Big thanks for your help guys
Click to expand...
Click to collapse
Congratulations
Yes, that was precisely my problem. with 1.40 everything works.
I upgraded to 1.93 but dont know why, just cuz it looks to be a higher version...
So now you can spread the knowledge, and keep helping our junior members...