Connection Blues...BA Pro Needed - MDA III, XDA III, PDA2k, 9090 General

Hello. I'm new to the PPCPE thing, but have been a longtime user of PPC's. Just got a stunning BA, and am beginning to see the charm in it.
Problem: It appears that when I sync, everything is dandy, but if and when I attempt to surf the web through the AS connection, I get the NO PAGE FOUND error. However, when I try to surf wirelessly (GPRS-Cingular) it goes. As an aside, the AS internet connection on my Asus A730 PPC works perfectly!!!
Helpp!

Sorry to sound a little stupid but what is it you are reffering to when you say "AS"?
Do you have WEP security on your wireless network?

AS=Activesync.
No wireless network involved.

AS=Activesync.
No wireless network involved.

Sorry got my wires crossed with another thread.
Hmm that is strange now that you mention it I have exactly the same problem, only I used to experience problems with my wifi.
I will post something once I have resolved it!
What connection settings do you have?
Do you use a proxy server?

Errrr, I guess that I'd know if I was using a proxy, right. So I guess not. Otherwise, regular usb I suppose.

Related

XDA IIs Wifi and lockups

Does anyone have a problem with their wifi locking up their xda iis? I have bought a linksys router and am getting frequent lockups when using wifi. I am using the shipped O2 rom, thanks
I have no problem at all with Netgear router. Try changing the connection speed setting in the router to the "b" mode only. Hopefully this can solve your problem.
No problems here either I'm afraid. I'm using a Draytek Vigor 2600VG at home and at work there are two of us with XDA IIs using a Linksys BEFDSR41W wireless router and no problems there either.
Sorry! :-(
Try a hard reset (gulp!) and see if you still have problems (Without anything else installed that might be inteferring) otherwise might be a faulty unit perhaps.
--Neil
I second what xanth said, I had the problem where wifi would not turn on, so I hard reset and installed each software back individually the problem was Calligrapher 7.3 did not like being in Storage or Storage Card only in Main memory (go figure)
efjay said:
Does anyone have a problem with their wifi locking up their xda iis? I have bought a linksys router and am getting frequent lockups when using wifi. I am using the shipped O2 rom, thanks
Click to expand...
Click to collapse
I use the XDA IIs on a variety of wireless networks and experience problems with an alarming regularity. The most annoying is the fact that the top bar seems to loose functionality, when using wireless!!
I will actually add that I do seem to have problem with the "range" of WiFi.
I need to do more testing, but it doesn't seem to be more than 20m or so before have communication issues/timing out :-( Will have to find out what our walls are made of!!!
I have problems connecting sometimes. I regularly use three routers, Draytek, Buffalo and Belkin. The only time that it locks up is when using skype. The skype problem is a known issue with no cure.
Nigel
I am having a problem where my Siemens SX66 will loose connection to my Microsoft MN700 wireless AP on occasion. -It simply appears as if the Wifi radio shuts itself off.
Weird.....
Wifi has never worked for me. It simply doesn't work in the way nature intended.
The main problem (as far as I can tell) seems to be that it cannot get DNS or IP configuration settings from my router (Belkin 7630) automatically.
It can connect to my wireless network without any hassle, but that's about it. If I enter DNS and IP settings manually it works fine. But this is unworkable if you want to connect to another wireless network.
If I can't sort this out by next week I'm going to sell the unit on eBay. It's been nothing but a pain since I mistakenly bought it in December.
Wifi is a nightmare on this device! I'm going back to Nokia.
I am going to do a hard reset and test to see if i still get any freezes. Anyone know of any software i can use to backup my text messages?
WiFi
Hi guys,
Haven't had too many issues with WiFi over here - standard O2 Asia ROM (with the BT 3500 update).
I'm running a Netgear WG602 @ home with 64bit WEP and a Dlink AP2100 @ work with WPA-PSK. No connectivity problems at either location, both DHCP. It does however take a few minutes to connect, but this is on the odd occasion.
The only frustrating thing with the WiFi is that I have to soft-reset often to turn Wi-Fi on - any ideas? Hopefully O2 will fix this in the next ROM. Other than that, I've had the Nokia 9500, P900/800 and this is by far the best device for the power user.
Just me 2c!
Cheers
cK
Wifi is on all the time on my device, sometimes when I switch the device on while within range of an AP it does not connect. Often switching wifi off and then onn again causes it to connect. If this does not work then I can often go into the network dialogue section, and see the network marked as 'availble' but not connected (why it sometimes does not auto connect I dont know). Tapping connect usually cures. If that does not work then I too need to soft reset.
I hope like you that they fix this cause its damned anoying. I will be interested to see what the Benq P50 is like when its released. I shall get one from expansys to test and ship it back within the 7 days.
Nigel
As for those having problems with specific access points. It is not nessesarily the fault of the blue angel. It seems to me that none of the manufacturers of wireless kit understand the term 'standard' they all seem to have their own take on it, which is why kit from different manufacturers refuses to talk to each other. I am of the opinion that they do it in purpose to lock you into using their client cards with their AP's !!
Try it with some non Belkin kit and see what happens.
Nigel
Well i tried a hard reset and didnt install any apps and tried connecting to wifi again and still got a lockup and loss of connectivity. Im going to swap the router for another make and see what happens
Swapped my linksys router for a D-Link and so far no problems after 2 days. so looks like my problem was my router.
Swapped my linksys router for a D-Link and so far no problems after 2 days. so looks like my problem was my router.
XDA IIi and wifi
I just bought one of these and can't get it connected. I have a netgear wg602 access point. When I finally figured out how to set the IP manually (the 02 xda tech support said it can't be done - maybe they're right ;-)
I now have it saying it's connected, with right IP address. My DNS and gateway are set up for the wireless adapter in network adapters. The signal is average. The XDA says wifi is connected. The access point even says it's authenticated and associated - same as my other stations.
Only problem is, internet explorer doesn't find any web pages - says "The page you are looking for cannot be found" (works fine through GPRS)
Also, terminal services times out trying to connect to an internal IP address (to eliminate DNS as a problem)
So, anyone know how I troubleshoot network problems - it looks like a TCP/IP issue? Can't find ping or arp etc. I've also tried an IP address that I know works on the network.
thanks for any help
Dave
Hi
For ping, ipconfig and stuff, head to http://www.cam.com/windowsce.html
I have had multiple issues trying to get wifi working reliably. It still fails now, but there are a few tricks to get it working again. Most of my wifi issues have been due to regular use of three AP's [email protected] and [email protected] along with GPRS and VPN.
To start with I suggest setting all the ****e in connections (internet and home network to 'My ISP' then goto your wifi setup, network adapters, and tell it that the wireless card connects to the internet. Now, tap ok, and goto tools, network cards, tap the active connection (it must already be connected) and ensure that its set to internet.
Next soft reset the thing, and wait for it to connect to yr wifi. Now, use the ipconfig tool and ping tool from the above site to check that all is OK. Check that its got the default gateway right and a sensible LAN IP.
I have found on occasion that I can be connected via wifi, but that the device is still trying to talk using an old IP allocated by gprs which means nothing to my lan! IPconfig will show if all is OK.
Whoever wrote the whole of the networking system (and its terrible gui's) on windows mobile wants shooting. I usually have 2 VPN profiles setup under my work network. If I leave it set to that, and use wifi from my lan to connect to the internet all is fine. However if I try and access a local server, the damned thing starts trying to connect a vpn (it aint inteligent enough to work out that the IP I asked it to connect to is local).
I have been trying to find a setting for all this networking rubbish that allows me to do *everything* without reconfiguring each time - to no avail.
Another thing to note is that you cant send/receive MMS messages while wifi is connected (more stupidity), it tries to connect to the MMS server using the wifi connection, and the telco blocks it cause it wants to charge you for sending MMS over GPRS. Only solution is to disconnect wifi, send MMS then reconnect wifi!!!
Nigel
No problems with WiFi for me
Hmm I'm using an O2 Asia Rom as well.. and my wifi manager seems to automatically create "settings" for each AP it detects and I seem to have no problems connecting at all... been using WiFi around my house since the first day i got it..
i am using a Linksys Wireless 802.11b router..
btw I am new here.. finally able to register!
How's everybody doing?
Cannot turn off IEEE 802.1x
Has anyone had problems unchecking the 'IEEE 802.1x netwrok access control' checkbox???
I uncheck it, but then when I go back to the screen (click on the connection | then select 802.1x tab at the bottom) it has checked itself again!
The XDA IIs does not save the setting - it just keeps re checking itself 02 help have been no use - they sent me an instruction manual and it even says in one of the step 'uncheck IEEE check box'
Im am using a netgear wirelesss router and have also tried on a d-link
Sugestions - is anyone else having this problem??

WM6 Internet Sharing Port Forwarding

hello everybody,
i´ve checked the wikis and searched through the whole forum but did not find anything related to that. my question is:
my notebook is connected via the internet connection sharing - everything is working fine - but i can´t use some services because i need to forward the ident port (113) among a few others for that.
so, any idea how i can do that? (if possible at all).
any help would be greatly appreciated!
I think port forwarding might be a bit hard.
First thing you need to check is what IP your Tytn gets from your ISP. If its in the private IP range
10.0.0.0 - 10.255.255.255
172.16.0.0 - 172.31.255.255
192.168.0.0 - 192.168.255.255
then its not going to happen. Your ISP(ie your telco) is NATing you further up the chain and they are the ones who needs to forward the ports for you.
It doesn't really matter what IP he gets from his ISP - the phone is already NAT'ing the connection. Unfortunately I don't think it's possible to forward ports with the phone.
Ofcourse it does. If his phone is getting a public ip there im sure there is a way to forward the ports.
But if his ISP is doing the NATing then there is no way.
hmm, so you guys think it´s already time to give up hope?
The same question.
I need port forwarding for utorrent client...
When it was WM5, there was a Modem program, so we can easy create and ue dial-up connection on PC! and PC gets real IP from cellular provider...But now WM6 works as Router and PC gets fake IP from mobile device(mobile gets real ip from cell provider)
And we can't do anything
Dmitry: Just because I'm curious: what network you are using and what is the ip subnet you are provided by the operator? So never seen in even one operator, that would provide me with external IP.
Does this do what you are looking for?
I found this app.
http://www.zatelnet.com/zatunnel/main.php

Cannot connect on my wireless at home...plz help!

I have a cingular 8525 (WM5, and updated from cingular) which can connect on my wireless at work, but when I want to connect to my personal wireless at home it cannot connect, but it does for unlocked wireless around my appartment.
There's nothing wrong with my wireless system, because my laptop can connect all the time.
It keeps telling me that the password is wrong, but it's right because it works for my laptop.
A highly trained friend in computers tried to fix the problem and he doesn't understand why it doesn't connect, even if i leave my wireless unlocked.
My wireless is from comcast and it's a fast cable-DSL.
I'm thinking to download WM6 and see if it gets fixed...
Any suggestion will be appreciated.
Thanks!
I've experienced that too. Here's how I fix my problem.
1.set in PPC as hidden network.
2. Turn on WIFI, delete existing connections, then add new connection and assigned new key ( I use WEP) and that's it.
BTW. Did you set MAC filtering on your Router. If you do , you need to add the PPC MAC address to the router....
Good luck
I agree with pl55, however maybe you should post this in the main Hermes forum as this forum is for questions related to WM6...
Just a gentle suggestion
Mate,
There a few of us who have had strange things take place with wifi on the HTC handsets. Me being one of them. My wifi at home is 100% stable when it comes to pc's yet when it comes to my handheld it is completely unpredictable - until...........
I have just upgraded my ROM (again) to Black Shadow and all of the issues have gone away. I haven't even had to do anything extra. So what does this tell me????? It tells me that there are certain things in certain builds that cause anomolys problems.
I would give a different ROM a shot. I can vouch for the Black series but I am sure the others are equally good.
Before you do all of that, you might want to see if your handheld is actually seeing your SSID (if its not withheld) by using something other than the wifi software on the handset. Try something like wififofum (great little app).
Good luck.

Which wireless N-router connects artemis? Belkin N1 doesnt !

@all,
just havin sold my iphone i am missing synching my mails with my pda over wireless, since my belkin n1 wireless router simply doesnt allow my artemis to connect
so, mind you telling me how you connect successfully?!
- which hardware / wlan access do you use?
greetz
Any wireless router will help you connect with artemis. I have used Dlink, netgear and also linksys routers to connect.
TO connect sucessfully, you need to activate wireless on the router. Then enable wireless in your arte using the comm manager. Once the wireless is activitated, try searching for networks.
Regards,
Kailash
thanx,
but i really aint a novice!
I have tried the belkin n1 now for time and time again...it searches, finds the network, asks for the pin...and returns wireless as unavailable again...
this repeats regardless of security settings or anything else i tried
i remember there having been a lengthy discussion on this...just cant find it..
so back to my question:
which hardware does work?
ideally quote your settings as well, please
greetz
have you checked that both the router and artemis are using the same authentication type? WPA/WEP etc
it might be worth checking that your router isnt set to N-Only for connection speed too....cant remember what speeds the artemis supports but B or G are most likely and maybe your router would reject the connection if it's the wrong type...IIRC the 'N' spec is still in-progress so not widely supported yet
Try a D Link DIR-655
thormdac said:
thanx,
but i really aint a novice!
I have tried the belkin n1 now for time and time again...it searches, finds the network, asks for the pin...and returns wireless as unavailable again...
this repeats regardless of security settings or anything else i tried
i remember there having been a lengthy discussion on this...just cant find it..
so back to my question:
which hardware does work?
ideally quote your settings as well, please
greetz
Click to expand...
Click to collapse
You are not alone!!! I bought a Belkin N1 Vision in December to replace an ageing 3Com router and no matter what I tried I couldn't get my artemis to work. Even without any security. Finally sent the Belkin back and got a D-Link DIR-655. It works like a dream. Connected with no problems at all.
Darn, that confirms what i thought for quite some time - anybody intrested in owning an N1Belkin!
Just doublechecked with an old netgear--and it connects right away...
thanx for ur help!
now could we widen the length of compatible routers, pls.?!
greetz
I use a sitecom 300N router and my artemis connects with it without any problem.
Phill
Netgear
Hi, I use a Netgear WNR834B. No problems using WiFi with Artemis.
Setup; WiFi up to 270 MbPs, region Europe, channel 6 broadcasting and the strongest encryption for security.
With all of the ROMs i have used, there were no WiFi issues.
Regards
This may be stating the obvious, and I apologize if it sounds stupid, but has anyone checked for the "wireless mode" on the router ?
Just ensure the router is on "mixed mode", i.e. it supports b/g/n connections...
Hope this helps...
hmm I also have problems with SMC (SMCWBR14S-N2), mixed mode, but not connect with Artemis.. my notebook connect without any problems.
had the same problem with n1. tried and tried last night with luck, removed all settings on artemis dissapointed. gave it another go this evening after booting system up and connected okay after putting in password.
just double check all the router wireless settings and any security settings you have. save any changes and restart the router.
hope this helps
mjm383 said:
had the same problem with n1. tried and tried last night with luck, removed all settings on artemis dissapointed. gave it another go this evening after booting system up and connected okay after putting in password.
just double check all the router wireless settings and any security settings you have. save any changes and restart the router.
hope this helps
Click to expand...
Click to collapse
Well done getting it to work. I thought I tried everything! Perhaps it was the restart that did it. Too late for me to confirm. My Belkin went back to be replaced with the DLink 655. Good router but does slow down with time and needs a reboot every now and then.

Using my TP2 as a Router

Hi guys,
as said, i try to use my TP2 as a router, via my T-mo connection. I have an unlimited dataplan, and flashed the EngeryROM from Warhawk i guess.
Here is my Problem:
I can't access certain sites while using my TP as a router, and what annoys me the most is, that i cant run icq or steam on my laptop, using the TP...
Altough, icq runs on my TP.
Is this a port problem, or is it because T-mo blocks it?
Or any other idea?
Any help would be appreciated
I can't imagine that they'd block it. I'm not entirely up to speed on using the phone as a router, is it possible that the ports are blocked? Does the phone have an interface you can connect to similar to that of a traditional router? (IE tether your phone to your computer, once connected run an ipconfig and then type the address of the default gateway into your browser and see if there's an interface?) I might be way off base with that, though.
As an aside - I'm not sure what T-mobile's deal is with "unlimited" data plans. If it's anything like AT&T then once you cross that 5GB line you'll probably be on watch (from what I've gathered online), so you might want to look into that if it is your intention to pull a lot of data downstream from the likes of steam.
not familiar with t-mobile's data connection/setup but maybe its a proxy issue? try disabling the proxy if there is one and see if that helps.
I am using Energy Rom on my Tilt2 but I am on ATT
I had exactly the same issue.
Basically I had to disable proxy (which is a trick to get it to stick)
and switch to a different APN
I know it may not help but the default AT&T apn is wap.cingular
I use isp.cingular which supports direct connection without a proxy.
I am not sure how TMO does it's connections, but this may point you in the correct direction.
I guess its the proxy, cause i definitely know, that it's not volume limited.
Can anyone link me a tutorial or describe me how i can change that proxy or whatever, cause i'm really a noob when it comes to this...
The TP2 is my first WinMo device, so i ain't that experienced yet...
If you start WiFi Router, is there a choice for the internet connection in the lower area? I remember that I had several preconfiguratet connections on my MDA V when I got it from T-mobile. Maybe you can choose another connection there and it works. Did EnergyROM automatically set up your connections after flashing? Maybe you try these settings:
Name (Profilname): T-Mobile Internet
APN (Zugangspunkt): internet.t-d1.de
Benutzername: internet
Password: t-d1
DNS-Adresse: 193.254.160.001
IP- / Proxy- / Gateway-Port: 9201
Verbindungssicherheit: aus
GPRS-Ablaufzeit 2 Minuten
hey, tried out your settings, they seem to work, but i still cant connect with steam and icq -.-
i can only select the t-mobile internet connection in the wifi-router.
aaaaand i cant find the field where to enter this gateway port stuff you wrote.
Hope this links hel you:
http://forum.xda-developers.com/showthread.php?t=533664
http://forum.xda-developers.com/showthread.php?t=407563
And don´t forget to vote for Rhodium!
Nope, still not working. These tuts just show how to establish a connection, but i already got one. The problem is, that i can only access the internet via browser
No steam, icq, skype or else, which is pretty annoying, cause i don't want to pay an extra 25 euros for a surf stick by tmo...

Categories

Resources