I have a dead xda2, and I bought new I-mate jam. Is there any way I can flash my dead xda2 by using my new jam.
What do you mean by "dead", what is the problem precisely? Do you get serial on screen? If you do then you have an intact bootloader and will be able to download a rom from this site to flash to your phone.
hey guys
actully i have the same probelm with my xda2, its dead too( it just comes to the boot mood where it shows the serial number). how can i flash it, cuz it doesnt even connect to pc the?????
hi
@daonly:ur device is in bootloader mode...the question is:does the serial on the top of ur screen changes to USB when u put ur device in cradle???if yes then read the links i've posted
@Ahmed:"flash ur dead XDAII by using ur jam"????!!!!i don't know what do u mean,but there's no relationship between the jam and ur dead XDAII...
anyway Ahmed,how dead is ur phone???does it show serial on top and a number on the buttom,if it does,then ur in bootloader mode and u have the same problem as daonly :wink: ,so read the first link,then the second one,and if u still have problems(both of u :wink: ),just let me know,it will be my pleasure to help u...
1st post: http://forum.xda-developers.com/viewtopic.php?t=26175&highlight=
2nd post: http://forum.xda-developers.com/viewtopic.php?t=25830&highlight=
hope i've helped....
RAGO :lol:
dead XDAIIS (in bootloader mode) please help..
Dear Guys,
My XDAIIs is in bootloader mode (it shows serial--> at top and V 2.07--> at bottom, and doesnt turn to usb when i plug into my usb port). Does anyone know how to fix it? Please help....
Related
Hi,
I just started with the ROM upgrade of my I-mate Pocket PC to 1.72.00wwe (obtained from the I-mate website) when my phone switched off. Now it only has (at the top) "Serial" and (at the bottom) "v1.06". No matter what I do - soft or hard reset nothing happens, obviously the power button also doesn't function. On my PC desktop I got the message that I need to reset my phone and re-connect.... can't get my phone going, so here I am.
The solution to my problem is (hopefully) simple ? I will really appreciate if you could help me with this ?
not a problem hopefully....u just made HimaClearJumpCode.exe run on ur device(this file exists in ur upgrade folder),and now ur stuck in the bootloader mode....
do the following:
1-hard reset ur device(it wont boot,off course)...
2-put it in the cradle,u should see that ur XP has found a new hardware(if it doesn't,change the USB port)
3-now run the himaupgradeUt.exe.
Now in case(just in case),those procedures didn't work,go to plan B.. :wink:
1-take the battery off ur Himalaya.
2-leave ur device for 12hours(it won't need all that time,but to be on the safe side,u know... :wink: ) without battery,so that backup battery drains...
3-put back the battery,recharge and enter the OS(this option wont work if u have erased the ROM)
4-rerun the upgrade...
good luck.....
RAGO :lol:
Hi
OK, what happens if the ROM is erased.... (judging by the fact that nothing happens when I put it in the cradle - with power on the cradle) ?
My phone was off for about 12-hours - blank screen when I got here this morning.
If I put it in the cradle (and after changing between all the available USB ports on my PC) the PC doesn't detect it - ActiveSync doesn't connect to the phone at all... Note : I have power on the cradle, and it's been a hour now - still just "USB" "v1.06" (or "Serial" if I take it out of the cradle).
:?:
so it is connected!!!!!!!!
since ur serial on the top of ur screen changes to USB when u put it in cradle,then it's connected.... :wink:
now just run the HimaUpgradeUt.exe in the folder that contains the NK.nbf file(32MB,it's the ROM),and it should start the upgrade....
be sure the NK.nbf is a Himalaya ROM....
good luck...
RAGO :lol:
Hi,
Thanks, did it just after posting my reply and everything worked out fine. Note, I just ran the ROM upgrade file (not HimaUpgradeUT), which I got from the clubimate webste.
Thanks, once again for helping me with this one.
Himalaya pocket pc - screen frozen on bootloader
Hi,
My problem is the same - but the difference is that whenever i run the himaupgradeut i get a connection error saying that the PC cannot identify the cradle as connected.
What should I do now?
could anyone help me out of a mess please , i have recently purchased an mda3 to replace my xda2 , i unlocked the phone which went ok but wouldnt accept my o2 sim , being the same phone as the xda2s i thought maybe it would need the o2 windows version rom on , i selected the wrong rom from my pc and the upgrade stopped after a few seconds stating it was the wrong version but now the phone has no rom on at all just a dark screen with "serial" or "usb" if it is docked . Have i done permanent damage ? any help would be very much appreciated
Your phone is currently in bootloader mode - if you have a valid ROM for your device you should be able to flash it with the phone in the USB cradle (the dark screen should change to USB).
If you don't have a valid ROM, go check out the wiki, there's plenty to choose from there!
many thanks forza , as u can prob guess im new at this !
sorry to be a pain forza but unsure which files on the ftp to use , doesnt have to be the latest rom i just need it to work again , could you also tell me how to execute the files , do they load from the desktop , many thanks bren the amatuer
This page on the wiki lists the available original ROM packages;
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
The T-Mobile UK one (1.42) is the latest version ROM (3rd on the list), so I'd recommend you start with that (it's the one I use).
[EDIT] just noticed you're showing as being on O2, further down the list (almost at the bottom of the first section) there's a UK O2 ROM - that may be better for you.
With the phone docked in the cradle (with USB showing on the screen), you can just the run the exe you downloaded and it should flash it for you.
thanks forza ! your a star worked a treat
qtek 9090 with USB V2.06 message error
I have the same problem with my qtek 9090, but I dont can sync my pocket pc. I see only USB V2.06 if the pocket is full charged ( and serial if not on the crable connected ).
Why I can not sync this with my laptop??
I have make a hard reset but still not work!!!
please help me
I have read many post but nothing found...
thank you
scharmander ( newbee )
I was upgrading my XDA2, it said completed, and when i restarted it, the o2 splash screen appears with radio verson 1.17 and thats where it stays... can anyone help. I have tried reinstalling the rom.... but it cant see the pda, and aborts...
Help would be appreciated
Does your device have a bootloader mode? If so get it into, connect usb & start upgrade program. This works on a magician, maybe on yours too?
Regards, M
thank you for the advice, but it is himayalian model.....so i do not know it it has a boot loader.
Read & repair
Hi Smudge,
Take a look at this post & got it from the thread 'stuck in 02 splash screen' at http://forum.xda-developers.com/viewtopic.php?t=25830&highlight=himalaya bootloader 4th post.
RAGOv said:
well my friend i think somehow ur OS is lost and all u still have is the extended rom OS image,that's why u still see the splash screen...
i assume that ur device is a himalaya(though u did'nt mention any informations :wink: ),but if really is,then do the following:
1-log in to this forum as user:xda pass:xda
2-go to ftp server from the wiki page(up left ur screen)
3-go to himalaya folder and download any rom u would like 2 have(it can appear in several way,exe file or several files zipped in a .zip)
4-if it's and exe file and u have winrar,then extract the content in a folder,u will find 6 files(maybe less,rarely 1 file more-xda2nbftool.exe-),now forget about this file for the moment
u will need 2 file to fix ur phone:nk.nbf & HimauUpgradeUt.exe(i idvice u to dowload an O2 rom upgrade to prevent country id error wich can be fixed if necessary )
now that u have the tools,do the following:
1-press power button+navigation pad(the round one between the green and the red buttons)+reset b
utton SIMULTANESLY,u will enter bootloader mode(blank screen with serial on the upper side of the screen,number like 1.06 on the buttom)
2-put the cradle in usb port DIRECTLY IN UR COMPUTER NOT THROUGH USB HUB
3-put ur phone in the cradle while it's in bootloader mode,u will see that the serial word in the upper screen have changed into USB
4-run HimaUpgradeUt.exe and follow the on screen instructions,u will see a status bar,wait untill it finishes,hard reset ur phone,and here we go
i forgot to mension that u should put those 2 files(HimaUpgradeUt.exe & nk.nbf),in a separate folder,close any open task on ur desktop/laptop,and PUT UR CHARGER IN THE CRADLE for the battery don't run out...
hope i helped
tell me what happened with u dude,and remember that ur in the best PDAs developping site in the world,so don't worry,hopefully,everything can be fixed....
RAGO :lol:
Click to expand...
Click to collapse
Cheers, M
Hello all!
I've purchased O2 XDA Zinc in Arabian. I'm living in Russia now.
When I open the box, get the PDA and turn them on I've got screen like this:
mars II eboot ver......
h/w version v1.4
******** usb loader ***********
diskonchip g4 128mb
start downloading image...
please plug-in usb cable...
And that's all... Now I can't go to Arabian to change my PDA and there is no service center that can fix it in Russia
I tried soft and hard reset and no effect.
When I connect PDA to PC the new hardware "Asus USB sync" appear in system, but Active Sync does not recognise them (I have 4.5 version).
All o2 zinc upgrade software are working with active sync and available os and i can't use them.
I've extracted binary filles from update exe, larger of it i've rename to MarsII_G4.ABI and put it on SD. But after insterting card and restarting nothing happens.
I also have some knowledge of elelectronic.
So, please help, how can I fix my PDA?
Thank you in advise!
ok fer
find another ppc first
find a dos app and rename it to devicespy.exe and make it readonly
transfer it to windows directory of other ppc and plug it to pc via mini usb and activesync 4.5
download and run any zinc rom from seeo2
if you did it well the upgrade software cant recognize the device type so continue update progres until your ppc get reset.
replace that ppc with your zinc and update will continue to end and your zinc will be fin.
choose any lang you wish.
You'd better visit www.seeO2.com
and register with your IMEI.
Then you can download WM5 or WM6 official rom.
Hope this can help
Yeaaa!!
It's really working!!
Thank you!
I've recovered my device by using this method.
O2 XDA Zinc. Please, help
Hi where can I get dos app file??
hi all......
i do really need help for reviving my dead o2 zinc.
it is suddenly dead wen connected to notebook via activesync.
yes.. it is SUDDENLY DEAD.
i'm doing nothing.
i have been trying to entering bootloader (by pressing right d-pad plus soft reset), but the bootloader doesn't show up.
doing hard reset, but nothing happen. still dead.
one thing that works is...
there is blinking orange LED when i connected zinc with wall charger (without battery inserted)
and there is orange LED (showing up about 3-5 secs) when i connected zinc with wall charger (with battery inserted)
anyone can help me solving this?
how bout using mtty?
anyone knows?
Hello,
I connect my qtek with pc. I tried to install wwe rom - from german to english. I ws downloaded english rom but cant install coz i have problem with COUNTRY ERROR -ERROR 120 atfer that i install in qtek "MaUpgradeUt_noID".exe and after that my qtek go to hell.
when i done hard reset on the screen write only: Serial and v1.00!!!!
..............qtek is dead...................
PLzzzz people help meeeeeeeeee
what can i do now for repair my qtek?????
p.s. srry for my bad english
Kind regards
Your Uni still alive
Try to download "Exit Bootloader.exe" from wiki, conect the uni to USB and Run the applcation...
If you uni is death when the Bootloader is lost. I brick my Jasjar when the Bootloader was gone, dont worry Try to read more in the forum Universal WM6.
AIN1 said:
Try to download "Exit Bootloader.exe" from wiki, conect the uni to USB and Run the applcation...
If you uni is death when the Bootloader is lost. I brick my Jasjar when the Bootloader was gone, dont worry Try to read more in the forum Universal WM6.
Click to expand...
Click to collapse
Hi AIN,
Thnks Mucho Mucho!
My Problem is, that i can only choose Com 1 to Com 3 in mtty 1.42 - Because of this i can't use the methode which is explained. - What i am making wrong? - I use a Sony Vaio Laptop for booting...
Thanks a lot!
if you have the rom try tis out!
1.unzip the file!
2.put the rom-extended rom-radio(or whatever you need!) in this folder
3.when you'll connect the phone on the usb,on the screen you have to see "usb v1.01".
4.run the "MaUpgradeUt_noID.exe"
5.wait till it will finish flashing!!
6.enjoy the new rom!!
qtek pu10 0r 9000 is freeze please big help
please big help / i just try to change language on my qtek 9000 and when the phone finish. and the screen freeze. and i off it and on it .and still the display show but freezing. and it can't connect to the active sync and pc /please help
Try a soft-reset first.
If not, you may have to hard-reset. You will lose all your data and programs you've installed and it will revert to factory state (or last flashed ROM).