Related
Hi all,
I recently migrated from old Handspring Treo 180g (PalmOS smartphone)
to new MDA III and now, only one thing miss me, a little utility (called TreoTools), which was able control switch on/off of GSM module by a sheduling.
So i was able to shedule to turn off module everyday at midnight and turn on back 8:40am at workdays and 11:00am at weekends.
This greatly improvement battery life on that device.
PLEASE, does anybody know, if exists similar utility for MDA III ?
Thanks alot !
Hi,
I think this software will help you
Thank very much !
This utility works perfectly, but do only a radio off (as its names). Unfortunately this can't do a "tooggle", and when is radio already off, popups an error message.
OK, there is other utility, shipped with MDAIII, RestartRadio.exe to turn radio ON. Unfortunately, it needs to launch twice, when radio is off :evil: .
Code:
EDIT: Hey, i discovered, that RestartRadio.exe DO a radio togle !
Any idea, how with this two (now one) utilities do a daily shedule? Turn off at midnights, and mornigs turn ON? Some scheduler, that can launching .exe at specified time ?
Thx
How about PocketZenPhone
how about this .. its for himalaya i dont know if will work on blue angel
http://www.phonesnooze.com/PS/
http://www.pocketgear.com/software_detail.asp?id=6614
..
toenailed said:
how about this .. its for himalaya i dont know if will work on blue angel
http://www.phonesnooze.com/PS/
http://www.pocketgear.com/software_detail.asp?id=6614
..
Click to expand...
Click to collapse
It look exactly i need !!! but it cannot be download, i get
Code:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query.
/PS/GetDownload.asp, line 42
Could someone post this "PocketZenPhone_4_5_1.arm.CAB" here ?
http://zendrui.free.fr/index.htm
Ace-steal said:
toenailed said:
how about this .. its for himalaya i dont know if will work on blue angel
http://www.phonesnooze.com/PS/
http://www.pocketgear.com/software_detail.asp?id=6614
..
Click to expand...
Click to collapse
It look exactly i need !!! but it cannot be download, i get
Code:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query.
/PS/GetDownload.asp, line 42
Could someone post this "PocketZenPhone_4_5_1.arm.CAB" here ?
Click to expand...
Click to collapse
use the pocketgear link you can download it there ..... anyway i uploaded the files, here sthe evaluation version of PhoneSnooze 2.0 and the PocketZenPhone 4.51
for newer version of pocketzenphone you need to buy it here
http://www.handango.com/PlatformPro...ctionId=0&catalog=30&txtSearch=pocketzenphone
or here
http://zendrui.free.fr/download.htm
..
I was were busy for last few days.
Want to thanx all, who tried to help me !!
I tryed these software utilities, and it seems, that PhoneSnooze work perfectly with MDAIII !!!! Thanx again.
P.S. i find yet another program for this task:
http://www.slipstreamsolutions.co.uk/products/mPhoneSchedule.htm
The difference between PhoneSnooze and PhoneShedule is, that PhoneShedule plays a sounds while phone is switched on/off (it is good to know, that phone going off or on) and can also switching power to BlueTooth !! But seem to be little unstabled. (maybe due WM2003SE)
could you post a link to restart radio.exe?
I tried an eval. version of mPhoneSchedule and although the interface is great and it looks quite a good program, I found the following serious problems.
-Does not schedule properly when phone power is off. Specifically I mean when the radio is on and the phone is sleeping, i.e nothing is on the screen it will not turn radio off. Seems a bit ridiculous. I am trying to save power, why would I want to require that the device be fully on to turn the radio off.
-Only will turn BT on/off with radio if you have Microsoft BT, not Broadcom.
I am still also searching for a tool that accomplishes this. Can anyone chime in on the review above. Does PocketZenPhone have the limitations above?
Hello Everybody.Has someone come up with a tweak to get rid of the 3 seconds ring delay (alsmost 2 rings) on the QtekUniversal? i tried the tweak from Tweaks2net but doesn't have any effect on the phone even after resetting it;
Could someone help me out?
T5kanking you all in advance for your valuable inputs.
Brgds, Adhoc
upgrade your radio rom to version 1.06
Ringer delay
kevin666 said:
upgrade your radio rom to version 1.06
Click to expand...
Click to collapse
Hello Kevin.
Thanks but this is not enough.
Adhoc
TO BE DELETED
TO BE DELETED; SORRY FOR THIS DOUBLE MESSAGE
Re: Ringer delay
adhoc said:
kevin666 said:
upgrade your radio rom to version 1.06
Click to expand...
Click to collapse
Hello Kevin.
Thanks but this is not enough.
Adhoc
Click to expand...
Click to collapse
you can try radio 1.08.00 and/or search your registry for "AutoDPDMode" and set all of them to 0.
buzz
Hello Buzz,
What is AutoDPDMode for?
just upgraded to ver 1.08.00 works ok so far no delay in pick up...
http://wiki.xda-developers.com/index.php?pagename=Uni_Radio_1.08.00
Re: Ringer delay
buzz_lightyear said:
adhoc said:
kevin666 said:
upgrade your radio rom to version 1.06
Click to expand...
Click to collapse
Hello Kevin.
Thanks but this is not enough.
Adhoc
Click to expand...
Click to collapse
you can try radio 1.08.00 and/or search your registry for "AutoDPDMode" and set all of them to 0.
buzz
Click to expand...
Click to collapse
Thanks for your input, Buzz. I cannot find any entry encompassing AutoDPD in the registry. Could you please give me the registry path to the relevant section and keys?
Brgds, Adhoc
Mine always begins at the start of the second ring.
1. use the original phone, not the bloated one with video messaging (not as pretty, but saves 3.5mb on load up)
2. remove memory card readers that are present on the today screen (eg SPB and Resco)
3. delays are longer when the contacts list is longer for caller id (I have 80 not 800)
4. consider when pictures and ringtones are also assigned to the contact (just use the standard single ring tone for all contacts, no pictures)
5. if your ring tones are on your sd card, this will also slow it down (move to windows\rings)
6. i extended the ring period also to a full 30 seconds to ensure that I have enough time to get to the phone when it rings out (phone settings voice mail or contact the provider)
I cannot get it to ring at all ever on the first ring, its always at the very beginning of the second especially from sleep mode or suspended)
3s delay before first effective ringing
simon_darley said:
Mine always begins at the start of the second ring.
Mine Too
1. use the original phone, not the bloated one with video messaging (not as pretty, but saves 3.5mb on load up)
Noted
2. remove memory card readers that are present on the today screen (eg SPB and Resco)
Noted
3. delays are longer when the contacts list is longer for caller id (I have 80 not 800)
Noted
4. consider when pictures and ringtones are also assigned to the contact (just use the standard single ring tone for all contacts, no pictures)
5. if your ring tones are on your sd card, this will also slow it down (move to windows\rings)
noted, will try
6. i extended the ring period also to a full 30 seconds to ensure that I have enough time to get to the phone when it rings out (phone settings voice mail or contact the provider)
I cannot get it to ring at all ever on the first ring, its always at the very beginning of the second especially from sleep mode or suspended)
Click to expand...
Click to collapse
Thanks for sharing your experience with me.
Adhoc
I found the AutoDPDMode registry key here:
HKLM\Drivers\BuiltIn\TureFFS_G31 and
HKLM\Drivers\BuiltIn\TureFFS_G32
So, what are they? I guess there are related to ExtendRom and Storage Card.....
So, why disable it? Any effects afterwards???
Cheers,
Folloow up needed on this one!!
chris_khho said:
I found the AutoDPDMode registry key here:
HKLM\Drivers\BuiltIn\TureFFS_G31 and
HKLM\Drivers\BuiltIn\TureFFS_G32
So, what are they? I guess there are related to ExtendRom and Storage Card.....
So, why disable it? Any effects afterwards???
Cheers,
Click to expand...
Click to collapse
Yes, do please share your knowloedge with us regarding this matter!!
Brgds, Adhoc
simon_darley said:
1. use the original phone, not the bloated one with video messaging (not as pretty, but saves 3.5mb on load up)
Click to expand...
Click to collapse
How did you get the original phone?
I tried the suggestions on the other thread where you need to change something in the registry, but that just disables the video messaging leaving a blank part on the screen. I want what you have, the original phone skin when I first turned my Universal ON after a hard reset. This original phone skin disappeared after I performed a soft reset.
From the wiki:
To set or remove the operator phone skin
The setting is at 'HKEY_LOCAL_MACHINE\Security\Phone\Skin'
The 'Enabled' DWORD value can be set to '1' to show the operator skin or '0' to show the default skin
lbendlin said:
From the wiki:
To set or remove the operator phone skin
The setting is at 'HKEY_LOCAL_MACHINE\Security\Phone\Skin'
The 'Enabled' DWORD value can be set to '1' to show the operator skin or '0' to show the default skin
Click to expand...
Click to collapse
Thanks for the reply, I am not sure if this was the one I tried before from one of the threads. How about you? Have you tried this registry tweak?
I did it by not installing any of the extended rom except operator settings, and the bluetooth patch.
my device boots up with 31mb of RAM available if all start ups and today screens are disabled.
I dont know how to do it otherwise.
I believe the hack mentioned above or similar on how to do it is posted on WIKI.
What has all this chit chat have to do with RINGER DELAY?
cktlcmd said:
simon_darley said:
1. use the original phone, not the bloated one with video messaging (not as pretty, but saves 3.5mb on load up)
Click to expand...
Click to collapse
"How did you get the original phone?
I tried the suggestions on the other thread where you need to change something in the registry, but that just disables the video messaging leaving a blank part on the screen. I want what you have, the original phone skin when I first turned my Universal ON after a hard reset. This original phone skin disappeared after I performed a soft reset.
Click to expand...
Click to collapse
"
He guys this is not helping us a bit out of the problem. This has nothing to do with the problem some of us are facing regarding the ringer going off after a 2 to 3 sec delay, making you loose precious seconds to answer the phone before the call gets routed to your operator voice mail system.
And the suggestion that you have to alter the settings regarding the handover time for an unanswered call or the other advising to just cancel the handocer to voice mail is also not helping us.
Brgds, Adhoc.
Please focus on that one !!
Hi,
AutoDPD is Auto Deep Power Down for DOC. I think it takes longer to wake it up from this state and thus it takes longer to ring.
buzz
Radio Rom 1.08 Rings Quickly - but the person on the oher end can't hear you immediately
Rom 1.06 takes a bit longer berfore it rings but you can talk straigt away
The best enhancement if you are not going to use video or 3G speeds is to set you Band to GSM or WCDMA and NOT AUTO, in Phone Settings
Obvioulsy if you have it on WCDMA and there is no 3G coverage you wont get signal
Skillie
buzz_lightyear said:
Hi,
AutoDPD is Auto Deep Power Down for DOC. I think it takes longer to wake it up from this state and thus it takes longer to ring.
buzz
Click to expand...
Click to collapse
Thanks Buzz,
So, should I disable both registry for the two storage???
And why it is orginally "1" in the default setting??? What is it actually for?
Cheers,
Hi all,
I purchase the HTC Vox as Orange e650.
I'll to know if there is a way to store the wlan config (precisely for hidden network).
The fact is that when I configured the Wlan connection and switch off/on the phone, I have to reconfigure before use it.
Thanks in advance for your help
Mods Please Close This Thread
This forum is for Hermes. Post elsewhere, like "General"
CrazyBaby said:
Hi all,
I purchase the HTC Vox as Orange e650.
I'll to know if there is a way to store the wlan config (precisely for hidden network).
The fact is that when I configured the Wlan connection and switch off/on the phone, I have to reconfigure before use it.
Thanks in advance for your help
Click to expand...
Click to collapse
You can create a CAB with your WIFI settings by following this post:
http://forum.xda-developers.com/showthread.php?p=1227587
It's for the HTC Hermes (you posted to a Hermes thread even though you have a Vox) but it should work on any WM device, including yours.
Regarding why your WIFI settings vanish after you turn your device off, sorry but I can't help you there.
Hi guys,
I saw a several post for the problem with the WiFi which dont want to connect after phone waked from standby
in my case - WM6.5 WWE Official Rom
how I solved this
[HKEY_LOCAL_MACHINE\Comm\BCMSDDHD1\Parms]
string Value - "EnableAutoConnect" must be set to 1
this work for me.
At first when you powerd from StandBy you will see that the WiFi icon still missing, but when you open the browser or Im .. or whatever using internet
WiFI Start to connecting
Thats from me
I Hope that this will work and for you guys
Regards,
patzkata
Thanks! Hope this works.
Is there any way to have it connected w/out editting the reg? Also, what program is best for doing so?
Ky772 said:
Thanks! Hope this works.
Is there any way to have it connected w/out editting the reg? Also, what program is best for doing so?
Click to expand...
Click to collapse
I don't know
did you tried it already?
it seem that this is some king of bug in WM6.5, and after the phone sleep (stanby mode) after that the WiFi is ON, but it dont want to connect
so if you chance the registri like i said, you will have no problems any more
Regards,
patzkata
The Registry Settings dont exist on my device. im running 6.5.3
Trying this - hope it works.
On do this.
[HKEY_LOCAL_MACHINE\Comm\BCMSDDHD1\Parms]
string Value - "HTCKeepWifiOnWhenUnattended" must be set to 1
drewcam888 said:
On do this.
[HKEY_LOCAL_MACHINE\Comm\BCMSDDHD1\Parms]
string Value - "HTCKeepWifiOnWhenUnattended" must be set to 1
Click to expand...
Click to collapse
that worked for me. Thanks
the EnableAutoConnect edit worked for me, but the HTCKeepWifiOnWhenUnattended did not hold after a restart. It would be nice if i could get my wifi to stay on. Any ideas?
BTW I got an HTC Tilt 2 with original rom WM6.5 rom ver 1.59.502.3 WWE
LiquidXed what i use and has worked with no problems so far to Keep Wifi enabled and on always ( even through standby) is Wifinostandby
http://forum.xda-developers.com/showthread.php?p=5353195
just install it and it will basically do what the Tweaks do (BBtweaks etc) but it does it auto on startup every time since the registry keys don't hold after restarts.
Hallo Guys,
my Name is Veit and im from Germany, so please dont hang me up if my english is incorrect.
Ive bought a HTC Desire and i know an App called "Best Profiles" from my Nokia-Symbian-Phone and now i want to get something else on my Desire.
Best Profiles could switch my Nokia during the night into a "Offline-Profile" where Networking and WLAN is disabled so save Battery. In the morning it automatically switch back to a "Online-Profile" WITHOUT entry of the PIN.
I found some apps that could switch between several Profiles by time-schedule but always the PIN needs to be re-entered.
Is there a way to get it like on the Symbian-Phone ???
Will it be possible with a other App or with a Custom-ROM ?? My Desire is already rooted and my current ROM is the Offficial Untouched Froyo 2.2 from the Forums here !!
Hoping for future answers and a big THX for the guys who do the hard work here !!!
Have you looked at JuiceDefender on the market?
Can do all you want and more
It's free for controlling the mobile internet but you will need to buy UltimateJuice if you want to be able to control WiFi etc.
Hey, thats a good question. I didnt know that app before now.
So if i install / buy that app i should set the phone into Flight-Profile ( Disconnect from Network, shut down WiFi, shutdown Bluetooth ) and reverse all those settings after sleeping without retyping my PIN ???
Hello,
its me again. Ive tried 3 different Apps but everytime the same situation:
I have to re-enter my PIN after reconnect to the Network !!
Any suggestions ????
I don't think you will get an app to do exactly what you want.
When the desire is in flight mode it turns the radio off, turning the radio back on requires the pin entry.
Ultimate juice can turn off wifi, apn's etc, but would leave the radio on so it's not ideal for you.
Other than turning the pin prompt off, I can't see an easy solution for you.
S..t,
OK if its the only way i will switch off my PINcheck and will secure my Phone with the Unlock-Figure.
Maybe in the future some of the ROM-Kookers could switch of the PIN-Reentry procedure after switch off the Flight-profile.
Regards
Veit
roadghost said:
S..t,
OK if its the only way i will switch off my PINcheck and will secure my Phone with the Unlock-Figure.
Maybe in the future some of the ROM-Kookers could switch of the PIN-Reentry procedure after switch off the Flight-profile.
Regards
Veit
Click to expand...
Click to collapse
Good idea! It might be worth asking for this feature in a specific rom thread so you can be sure the dev knows about it?