Somebody help my XDA2!! - Upgrading, Modifying and Unlocking

I am trying to downgrade my XDA2 rom from 2003SE to 2003.....
but after it erase all the data from my XDA2
it doesn't write the rom in........
now my XDA2 only can get in to the bootloader screen.....
and when I try to use the SD card to flash the rom by using the 1.03 version rom, it doesn't has any effect.......
although I am pressing the camera button on the left hand side
it still not ask me to press the power button to start
just display the Serial screen.....
Help me!!!

why not try and do it connected to install it direct from ur pc? if u only have the rom on sd card, u can get it from the ftp

Related

Universal Bootmenu

Can some pls help me how can I enter the bootmenu in Universal. I tried the combination given by wiki "camera + reset " but it doesnt works for me the device just soft rests. So pls can anyone help how can I enter the bootmenu pls.
thx
jeet
to get the bootloader you need to do power off + backlight + softreset.
i got the same problem as jeet got it, i cant get into the boot menu to get a sd bakup of my complete os
greetz
http://forum.xda-developers.com/showthread.php?t=549207
i know about that thread orb3000 but we dont talk about the BOOTLOADER, we talk about the BOOT-MENU where u can bakup ure ROM from current device to an SD card
i cant get into the boot menu if i push reset+camera !!!
thats the problem
grretz
didn't know Uni had a boot-menu
I believe for backing up ROM, you can use MTTY
I'm sure it's there in the wiki somewhere
Reset your device (using the SR hole) and then HOLD the camera button tight until you get the menu.
So the key thing is to HOLD the button after you hit the reset.
DOMy
you're joshing me? I have G3 and can't do that... (On WM6.51)
It simply boots up as normal. What does this 'bootmenu' allow you to do?

JAQ3 bootloader

Anyone knows how to put this device in bootloader mode??
and how to hard reset this device
thanks in advance
no nany help????
JAQ3 Bootloader
Hi to all please some body help I need to format my JAQ3 & enter Bootloader
boozer665 said:
Anyone knows how to put this device in bootloader mode??
and how to hard reset this device
thanks in advance
Click to expand...
Click to collapse
it can't be put on bootloader
you need a microsd card with less than 1 GB of size
then at laptop or desktop copy the .dip files from the rom (specific for JAQ3) in the root folder of the card
then turn off your jaq3 remove battery
put on microsd card
put on battery
press FN Key + Power on
Display will show up green and blue bars
after all bars complete
remove the battery and turn on the phone
that's all
regards!
jaq3
can sombody tell me where can i find the .dip files for my jaq3? ty
well the right way to hard reset this phone is not really like what mentioned in the previous reply but it s like what follows:
Turn off device, hold down send, end and camera buttons. Also press the power button then release all after on-screen prompt.

XDA Stealth no bootloader (cannot boot)

Dear all,
i've got 2nd hand xda stealth for 2 weeks, now my stealth cannot boot (black screen, call and End Button are light) after i flash my stealth with wrong ram with nb0 extension on miniSD. please any one can help me to recover my Stealth ?
sorry for my bad english.
xda stealth..
go to www.seeo2.com, download a rom upgrade utility from there.. then start upgrade procedure again. As xda stealth is a hybrid phone..dont try any custom roms on it..
thank's malhar for responding my thread.
i already download the upgrade rom from the o2 site (now is www.mwg.com), i put the rom to my SDCard, the problem is how can i enter the boot loader, in case my stealth always in blank screen with call and end button are light.
i already press press power + call + end button, but my stealth stuck on that condition. every method of flashing mode i already try but no response from my stealth.
Syaipul
oh yea malhar, for information i read the procedure for upgrading on o2 site that connect status is required for upgrading procedure in activecync, my stealth has disconnected status when i plug to my com. can i do the upgrade the rom in this case?
buddy, remove ur sd card from the device first..and then hard reset ur device by pressing reset button via stylus, then flag which is windows home key and then ok key..reset+flag+ok.. maintain the sequence..press reset first keep on pressing then flag and ok key.. it will format ur device.... then try to flash new rom on it
ok malhar, i'll try tomorrow. thanks.....1000x
sad-sad-sad
my stealth cannot boot (black screen, call and End Button are light) after i flash my stealth with wrong ram on miniSD. please any one can help me to recover my Stealth
Your SPL boot loader sounds like it is gone, formatted...
You may be able to patch it, using scripts & mtty if you can get into DL mode. Sounds like you're stuck in OEMSBL though.
help me !!!!
i have try pressing flat and ok botton to format . but nothing appear on the screen . is the other way to format or upgrade rom .
• The device doesn't boot, I see only O2 logo. Hard reset doesn't help and the Firmware update process stops with the first message?
1. turn off the device;
2. enter engineering mode;
3. in Main menu choose Boot Config;
4. in Configuration menu choose EBOOT-Launch Image;
5. turn off the device;
6. now hard reset or upgrade firmware.
Sometimes helps another method: leave the device without the battery for about 30 minutes, then turn your O2 XDA Stealth on.
• How to enter engeneering mode?
1. turn off your O2 XDA Stealth ;
2. hold Flag, OK and Camera + press and hold Power button;
3. use navigation buttons to select the settings.
Click to expand...
Click to collapse
follow this thread from YUC wm6
http://forum.xda-developers.com/showthread.php?t=352468
blank screen
for my case, i cant even see the o2 logo, only blank screen. is there any other way to reboot ?
cant see o2 logo
for my case, i cant even see the o2 logo, only blank screen. is there any other way to reboot ?
randysng said:
for my case, i cant even see the o2 logo, only blank screen. is there any other way to reboot ?
Click to expand...
Click to collapse
Have you tried removing the battery for few hours ??? Does the engineering mode work???
engineering mode
engineering mode ? how to set engineering mode ?
randysng said:
engineering mode ? how to set engineering mode ?
Click to expand...
Click to collapse
How to enter engeneering mode?
1. turn off your O2 XDA Stealth ;
2. hold Flag, OK and Camera + press and hold Power button;
3. use navigation buttons to select the settings
can u see..lights on keypad??what happens when u connect to pc..any sound or error
??
malhaar said:
can u see..lights on keypad??what happens when u connect to pc..any sound or error
??
Click to expand...
Click to collapse
i have a O2 tealth hanged on O2..... i tried hard reset but din work .... i downloaded new rom and software for updation .....but the problem is i cannot connect to pc.... active sync is installed...... plz help
khalifa_smart said:
i have a O2 tealth hanged on O2..... i tried hard reset but din work .... i downloaded new rom and software for updation .....but the problem is i cannot connect to pc.... active sync is installed...... plz help
Click to expand...
Click to collapse
It worked for me
Goto to your PDA setting and uncheck USB to PC.
Note: Check task before connecting to USB ensure no task including Active Sync.
FYI.
Im using VISTA Ultimate to update my XDA.
From WB 6.1 back to WM5. WM 6.1 too buggy and battery drained fast.
Cheers!
Please help me O2 stealth it dead not boot and blank screen .Are you Jtag for it please post it here.
i have the same problem --- my stealth is absolutely dead after using a cheap local charger
i have dismantled the board and taken some pics of the jtag connectors -- made the common LPT port jtag cable
how to proceed from here ?????
is the procedure similar to that of jtag recovery of a flame or an atom exec ??
how do i find the bootloader for O2 Stealth for flashing the NAND memomy Disk on Chip ??
please share your insights

Not able to Flash a new ROM !? Please help Me

Hey ho guys. I have a question and I hope somebody can help me.
A few Days ago I flashed this ROM:
-----> htc-developers.de/viewtopic.php?f=85&t=2510
(with OliNex Hard SPL and 1.00.25.05 Radio)
Now I wanted to flash another ROM
-----> sites.google.com/site/romshtcplus/
But now I got a Problem. Since I flashed the RTT Xtreme Rom, I am not able to flash another ROM. After the Softreset while flashing, the Mobile Centre of Win7 cant connect to my Diamond anymore.
Hard SPL is possible to flash but Radio and all other ROMS are not flashable -.-
Anyone knows what I can do? I tried the Original O2 Rom but even this one wont work.
I hope somebody knows what do do without killing my phone, cause the Xtreme ROM sux
Thx 4 help
- connect your Diamond to PC in Storage Mode
- rename file .nbh in diamimg.nbh
- copy diamimg.nbh in in your Diamond
- disconnect your Diamond
- press together "Volume Down", "Back" and "Reset" until appears Boot screen called USB Trigger Mode;
- press Power to go next...wait the process until to "Update Complete"
- reset and wait the Automatic installations

Bricked JasJam , help :(:(

Hi ,
I was flashing my jasjam using sspl-herm and a 6.1 rom ,
While upgrading the progress bar reached the end but it stayed saying upgrade in progress , it took too longer than normal and i knew it wouldnt continue so i soft resetted the phone ,
now it's stuck in the splash screen before even the windows loading.
Plz plz plz help....
try doing a hard reset not just a soft reset that might help
medo_punsher said:
Hi ,
I was flashing my jasjam using sspl-herm and a 6.1 rom ,
While upgrading the progress bar reached the end but it stayed saying upgrade in progress , it took too longer than normal and i knew it wouldnt continue so i soft resetted the phone ,
now it's stuck in the splash screen before even the windows loading.
Plz plz plz help....
Click to expand...
Click to collapse
if u have loaded hardspl then hold power button + OK button on sides of phone and then stick stylus into reset button an dthis should get u 2 red, green, white, blue colour screen and then plug usb in and re-flash
get hermes in bootloader mode, connect USB cable and flash with this http://www.4shared.com/file/61372397/e2bf76c0/official_ATT_WM6_striped.html
Hey ,
Thnx guys 4 help
1st I tried hard resetting and it didnt work
2nd I DONT have hard spl
3rd I get into bootloader , i plug the usb cable but i cant flash , the ruuwrapper program says error during upgrade , i think it cant access the phone first coz the mobile device icon in my computer is emtpy , second activesync says not connected(although it tries to) and device manager reads an " htc usb sync " drive but no letter or something
Still no luck , any help ??
Activesync doesn't need to be runing.
download mtty and do like he said here "http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen" (copy all text between " " and paste to your browser).
After "set 14" give "task 8"
Try flashing from SD card, first the HardSpl ant then the Original Stripped ROM.
@TheMim : tried but didnt work
@eryunt : how ?? i have a custom rom with the name HERMIMG.nbh on my sd card but it doesnt upgrade it says loading for a few seconds then some red numbers and letters appear at the top of the screen then it goes into the bootloader and doesnt upgrade
NOTE THAT : i dont have hard spl (no supercid)
Thnx again , plz help
Try downloading HARDSpl7 from here:
http://forum.xda-developers.com/attachment.php?attachmentid=35136&d=1173326890
Unzip it and rename the file "RUU_signed.nbh" in "HERMIMG.nbh"; put it on SD and so you will flash the HARDSpl.
Then, make the same thing with the file "RUU_signed.nbh" extracted from an original shipped ROM.
Hope it fixes your Tytn
Many thanks for your help , i will try that tomorrow but one final question ,
How can i access my sd card with no phone ?? do i need an external sd-to-usb device or something like that ??
medo_punsher said:
How can i access my sd card with no phone ?? do i need an external sd-to-usb device or something like that ??
Click to expand...
Click to collapse
Yes, you need an SD-Reader for your PC
Okay , now i have a cooked rom on my sd card (fat32 formatted) named HERMIMG.nbh when i get into bootloader it says loading for a few second then a red number "00068002" appears at the top of the screen and it continues to the tri-colour bootloader
any help ??
Have You already installed HARDSpl correctly via SD-card?
No , i didnt but will it work or i will get the same red number ??
PS : my bootloader version is 1.04 so i guess i dont need hard spl as this one can flash any rom , right ??
medo_punsher said:
No , i didnt but will it work or i will get the same red number ??
PS : my bootloader version is 1.04 so i guess i dont need hard spl as this one can flash any rom , right ??
Click to expand...
Click to collapse
Try downloading HARDSpl7 from here:
http://forum.xda-developers.com/attachment.php?attachmentid=35136&d=1173326890
Unzip it and rename the file "RUU_signed.nbh" in "HERMIMG.nbh"; put it on SD and so you will flash the HARDSpl.
Then, make the same thing with the file "RUU_signed.nbh" extracted from an original shipped ROM.
JUST FOLLOW ALL THE STEPS ABOVE
No no no no..... HSPL cant be upgraded now via SD card cause th SSPL was unsuccesfull!!!!!.....
Get a XP PC... your batt must be 50% charged or more "better", a working USB cable
NO SD CARD inserted... your XP pc must have NET frameworks 3.5
put your device in bootloader mode.... and upgrade any stock rom to rewrite a valid SPL cause your is corrupted now
then when you get a stock rom working via SSPL you will be able to redo the steps to flash HSPL V7

Categories

Resources