Develop Bugs

how to set Wi-fi for XDA IIs as adhoc (peer-to-peer)

Hi Everybody,
I can not configure my O2 XDA IIs's Wifi to connect to my notebook's wifi by using adhoc. ( where is the set up page in WLAN to set fixed IP, submask, DNS etc on XDAIIs ?)
My scenario is my notebook connects to office LAN cable. I try to configure WIFI on notebook to let XDA2s can surf internet via Wifi as adhoc.
Thank you for your help

Is there anyone can help me...pls

Anonymous said:
My scenario is my notebook connects to office LAN...
configure WIFI on notebook to let XDA2s surf internet via Wifi as adhoc.
Click to expand...
Click to collapse
It's a matter of *Internet connection sharing* (Keyword I guess...)
Your PC shares its LAN connection and you use it by your WLAN.
Depending on your PC OS version you may have wizzards to help establishing the share.
Jean-Jacques

Thanks
My notebook ( XP w/SP2 ) doesn't have the internet sharing feature on the LAN card at
Local Area Connection properties-> Advance (tab)
But I can see this internet sharing option at the same location on my Wireless LAN card properties.
What should i do to enable it on my LAN card?
Thanks
MR2046

i did it with my imate jam + sandisk wifi sd and sync, share files, do evrything....
just u have to add profile in ur PC/Laptop SSID with operating mode (Ad hoc), then scan with ur XDAIIs untel u find ur pc/laptop and connect.
btw, u need to configure network connection ip for both and make pc (192.168.100.1) - XDAIIs (192.168.100.2) subnetmask for both (255.255.255.0)
thats all :wink:

NightmarE said:
u need to configure network connection ip for both and make pc (192.168.100.1) - XDAIIs (192.168.100.2) subnetmask for both (255.255.255.0)
thats all :wink:
Click to expand...
Click to collapse
Isn't there a matter of gateway to be configured somewhere in the IP settings of the Wireless ?
I'm not sure of the one needed (PC vs. ISP)
Jean-Jacques

no need, coz the gateway just for a network between server and many PCs or for specific configurations, but at peer-to-peer mode (like computer to computer wire network) no need for Gateway. if u need more info take look here http://www.makeitsimple.com/how-to/simple.htm
laters 8)

WIFI With PDA2K

Hello Guys,
I need to setup the internet access at my PDA2k ...
so i can access the internet through WIFI Connection, USB Cable...
i have PDA2k Device and have wm5 Installed on it.
Note: i mad a successful connection with my wifi laptop and i get it connected but i cant surf with the internet exeplorer
Thanx in advance

U need to enable Internet Sharing (google it) between LAN & WiFi on laptop
Network Connections -> LAN connection -> Properties -> Advanced
or Wifi/LAN router attached to WAN/ADSL for home/small office use - all devices have independed internet access
I like Asus products - best price/quality ratio for me.
ADSL router with 4LAN ports + Wifi /g

[HELP!] PC network problems when connected with Bluetooth PAN internet sharing.

Hi there, I have a big problem that will force me to downgrade to WM5 if I can't solve it.
Here's the facts:
I don't have a telephone line at home and I'm connecting to internet using a flat GPRS/UMTS connection with Vodafone using my TyTN as bluetooth modem (using the old WM5 DUN profile).
Since I upgraded to WM6 (and I love it) the DUN profile and Wireless Modem has been replaced by Internet Sharing application. It works very fine but it messes up my network connection with my other PC.
I used to share the internet connection this way: the bluetooth modem was connected to my main PC (AMD Sempron). The LAN (manually setted up) on this PC was: 192.168.0.1 / subnet 255.255.255.0. The LAN (manually setted up) on other PC (AMD Athlon) was 192.160.0.10 / subnet 255.255.255.0 / gateway 192.168.0.1. It all worked very fine.
Now as I connect the PAN bluetooth internet sharing my main PC (Sempron) acquires a new network address (the TyTN seems to be automatically setted as 192.168.0.1) so the LAN on the PC is 192.168.0.153 /subnet 255.255.255.0 /gateway 192.160.0.1 and the connection works fine but I'm not able anymore to connect via LAN tothe other PC even if I try different LAN settings on the Athlon (I tried to manually set it as 192.168.0.10 /subnet 255.255.255.0).
Who can tell me how to configure the LAN setting on the 2 PCs so that I can access internet enabling PAN bluetooth on the TyTN with the main PC (Sempron) and still continue accessing remote folders and files via LAN on the other PC (Athlon)?
It would be great if I could share the connection with the 2 PCs like I did before, but I'll be ok if I can connect to internet with one and have a working LAN between the 2 PCs.
Hope I explained it well.
Waiting for suggestions. Thank you!

Pick a machine that is to be the internet gateway. Do this by initiating the BT PAN network on the first machine. On the first machine's IP stack, Enable Internet Connection Sharing. On the second machine, use the first machine's IP as your default gateway.
You should then be able to access the internet from both machines.
marty_73 said:
Hi there, I have a big problem that will force me to downgrade to WM5 if I can't solve it.
Here's the facts:
I don't have a telephone line at home and I'm connecting to internet using a flat GPRS/UMTS connection with Vodafone using my TyTN as bluetooth modem (using the old WM5 DUN profile).
Since I upgraded to WM6 (and I love it) the DUN profile and Wireless Modem has been replaced by Internet Sharing application. It works very fine but it messes up my network connection with my other PC.
I used to share the internet connection this way: the bluetooth modem was connected to my main PC (AMD Sempron). The LAN (manually setted up) on this PC was: 192.168.0.1 / subnet 255.255.255.0. The LAN (manually setted up) on other PC (AMD Athlon) was 192.160.0.10 / subnet 255.255.255.0 / gateway 192.168.0.1. It all worked very fine.
Now as I connect the PAN bluetooth internet sharing my main PC (Sempron) acquires a new network address (the TyTN seems to be automatically setted as 192.168.0.1) so the LAN on the PC is 192.168.0.153 /subnet 255.255.255.0 /gateway 192.160.0.1 and the connection works fine but I'm not able anymore to connect via LAN tothe other PC even if I try different LAN settings on the Athlon (I tried to manually set it as 192.168.0.10 /subnet 255.255.255.0).
Who can tell me how to configure the LAN setting on the 2 PCs so that I can access internet enabling PAN bluetooth on the TyTN with the main PC (Sempron) and still continue accessing remote folders and files via LAN on the other PC (Athlon)?
It would be great if I could share the connection with the 2 PCs like I did before, but I'll be ok if I can connect to internet with one and have a working LAN between the 2 PCs.
Hope I explained it well.
Waiting for suggestions. Thank you!
Click to expand...
Click to collapse

silverfox0214 said:
Pick a machine that is to be the internet gateway. Do this by initiating the BT PAN network on the first machine. On the first machine's IP stack, Enable Internet Connection Sharing. On the second machine, use the first machine's IP as your default gateway.
You should then be able to access the internet from both machines.
Click to expand...
Click to collapse
Ok, I started the BT PAN on my main machine (AMD Sempron) but how do I enable the connection sharing? When I was using the DUN connection I used the Advanced Options section to enable the Connction Sharing, but where do I find this opzion now?

On a Windows Machine the IP range to be assigned when Internet Connection Sharing is turned on is 192.168.0.x. That is also the range used by Internet Sharing on the phone. This is a routing conflict. You cant have a 0.x being handed out from the phone to the 1st computer and then have that computer handing out 0.x addresses to any other computers. The IP range the Phone hands out needs to be regedited to something else like 192.168.1.x As far as I know, you cannot change the address range in Windows Internet Connection Sharing. You will have to do it on the phone.
If this helps.

[Q] Configure Router With BA + RJ45/USB + Cradle

Hello !
I have router but without computer and i need to have administrator access for it.
I have BA with CRADLE (usb output) + USBtoRJ45 extenders + UTP CAT5e + AirLive WL-5470 Access Point/Router
Is it possible to setup the LAN card from BA TCP/IP (example: 192.168.1.253)
and then in opera 192.168.1.252 and enter in admin page from router.
See Attachment/Picture
Sorry for bad English.

sorry for the late reply.
unfortunately, there are 2 problems with that plan:
1. the usb to rj45 dongle you are using requires the device it is connected to, to be a usb host, the BA is not
2. even if it was, while the usb connection between the BA and the pc is bi-directional, control over data transfer always comes from the pc, the blueangel is not in charge of the connection, it cannot push or pull data.
but here's a simple idea: it is a wireless router, you could look underneath or in the manual for the standard wi-fi settings and connect the BA to it via wlan (if the encryption is not too strong for the BA)
then you should be able to use internet explorer to set the router up correctly. opera mini or skyfire are browsers, that probably cannot do that, because they are graphic browsers, that use remote servers to compress the webcontent before displaying it on the mobile.

yeah i know i can go through Wireless but while my router is working in CLIENT MODE for PC i cant change anything bucause it is then working as another BLUEANGEL that is connecting to another Hotspot.

[Q] usb0 network tethering

Hi,
I got a tethering connection via usb0 cable to use the Internet connection of my Noteboook.
(using adb port forwarding, ssh, openvpn)
Everything ( ping, browsing via skyfire ) works fine but i got no connection in gtalk and gmail ( with a no connection .. warning )
It seems like gtalk,market(downloads) und gmail prove if the phone has a wifi or gprs/utms connection. Any ideas to get this working ??
regards Jörg
HTC Desire
LeeDroid 2.3d
- Sorry for the bad englisch
- i got a very bad or no utms connection here
- i must not use wifi route or connectify on my notebook becauce of my companys security policies
- don´t want tethering ( i want to use the connection of my PC )