Hi,
Is it possible to change the bootup or splash screeen. I dont wanna see O2 0r Imate written when I start my device . If yes ...then how.
Dhruv
No need to search
...but if you did search, you would have found
mda3_bootimage_changer
E
Related
Hi,
- is there any way in WM2006 to change the splash screen? Any tools for it ?
- What's your favo rom, PDAViet Black & Blue 4.7?
- Favorite programs ?
Thanks,
Innovator
WM5Storage
My absolute favourite tool is WM5Storage. You can use your phone like an USB-Stick and i use it daily...
Are you searching for such a tool ? http://forum.xda-developers.com/showthread.php?t=317726&highlight=Splash+Screen
Cheers
Peter
Hi Peter,
Thanks for the reply, the problem is that I always get stuck after running the USPL tool, it goes to 100% then I see the Linux Pinguin screen, then i hear the 'disconnect' sound in vista, the rom flash utility starts, and then error 260 not connected. I suppose the USPL is not finished when the dos screen is finished, without ending the rom upgrade utility?
After the dos screen I also tried to plug out/in the usb cable, on the black screen, and start the rom utility manually to finish the USPL process, but no luck...
I tried the bootflash utility after the pinguin directly, but no luck either.
Searched the forums for likewise problems, but found no real clear solutions. Can anybody help me here?
Thanks in advance,
By the way, coolest bootscreen ever seen with earth
.... try
Have you hard-reset first? - Works great, and offen eliminates a lot of different problems (ore did for me anyway)
just tried and it's working...
to be honest.... i never tried to change the splash screen before, i just found the link about it....
But then i tried right now to change the splash with this tool, i first ran USPL and then when the phone was started again i could
upload my own splash screen with the replacement tool. Everything worked fine... no idea what went wrong on your device...
But i have also a question: is it possible to change the second logo and the windows-starting logo also ? How to do ?
Cheers Peter
Is there a .cab app that can help u change the splash screen? without reg editing? i want to be able to do it so i wont have to edit the registry but im tired of the old splash screen!
Which splash screen and which device? The first one when it boots up needs to be flashed on. The second one (Windows Mobile Logo) can be overwritten by a PNG graphic.
For example:
http://forum.xda-developers.com/showthread.php?t=349236
hi,
for the first bootup/ splash screen, how to flash it? my device is Atom Life
Hi,
I think my diamond is briked...
It stays stuck at boot with version numbers and nothing else. I have try hard reset but it doesn't work...
I saw on some other thread we can use remote command with Qmat or mtty but my device is not recognised by operating system (vista)
R 1.00.25.08
G 52.32a.25.17
D 1.93.00.00
Any clue how I can get it back ?
thx
SO with some more research I have find my way out, and for noob like me who want to get out the rom non boot, you just have to reset your diamond while pressing both of the volume button to enter in bootloader again and proceed another flash.
hi boss i have problem with my ARTEMIS after unlocking it the screen goes black and goes off i need help to solve this problem pls thanx in advance
artemis help
i m new to this site i just flashed my p3300 with bad cooked rom now it close. it wont boot it stuck in boot screen and one of the main thing is there is no OS .... symbol on bootscreen only showing IPL SPL GSM when i press and hold record and power + reset it wont go to bootloader how can i enter in to boot loader plzzz hel me ,
im awaiting for any one reply
if someone help that greatfull for me
plz help me
...
robinzen said:
i m new to this site i just flashed my p3300 with bad cooked rom now it close. it wont boot it stuck in boot screen and one of the main thing is there is no OS .... symbol on bootscreen only showing IPL SPL GSM when i press and hold record and power + reset it wont go to bootloader how can i enter in to boot loader plzzz hel me ,
im awaiting for any one reply
if someone help that greatfull for me
plz help me
Click to expand...
Click to collapse
* if you have an SD card in the device, take it out..
* put these two .cab files on your device and run them..
- Cert_SPCS
- EnableRapi
* get activesync connection to pc..
* start_uspl.. (runs a dos window on pc)
* screen on phone goes blank.. or penguin picture..
* only when the rom update utility window opens on pc, soft reset when its 100%..
(to get new activesync connection)
* continue to run rom update utility..
***ONLY after doing uspl is it safe to flash a rom..
when you have done uspl on your device startup you will see..
SPL: 1.11.cmon
* its done.
now flash any rom to your device..
USPL 1.11.CMON here.........
http://forum.xda-developers.com/attachment.php?attachmentid=41246&d=1181558635
***you have bricked your device so read carefully...
you MUST flash you device with the official rom before uspl..
you can find your official rom here...
wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
flash with official rom and message back wen you have done it --- only the official rom will work on a bricked device.. --- for now..
message me if you get stuck dude
I got one htc hd mini which when we power on the first startup show htc and below that it shows in red TEST ONLY NOT FOR SALE, and after that animation startup is ok, I want to remove or change the very first startup so it dont show test only not for sale, can any one suggest what to do or which cab should be installed so it remove the words at startup.
thanks
bcnboy
You can find boot animation for mini here or here or here or search for more.
I don't know what to say about that "TEST ONLY" device, but did you tried to change the rom ?
tahnx