Help my pda2k is dade - About xda-developers.com

Help, my device pda2k is dead; all I see is a grey screen with a serial number on top (or USB when the device is placed in the cradle) and on the bottom I see V2.06 or V2.07

Your PDA2k is not dead. It is only in bootloader mode
You have to do a hard reset (soft reset + Power button) and i think all works fine after :wink:

Related

problem with jasjar updating

I tried to update my jasjar but my phone screen turned off. there is written only serial on the top of the screen and v1.00 on the buttom of the screen. who can solve my problem:

Blue Angel Dead display (qtek 9090 - EUROTEL XDA III [CZ])

Hi everyone, i've got problem with this device.
Device is running normaly, but the display remains off(black), if you turn on the BA, there are stripes for a second, but then they dissapear.
MDA is making noise(clicks, warnings etc), you can use touchscreen but the screen is still black.
It has been in this state from yesterday, I was listening to the music via TCPMP, once I turned off the screen but later It couldn't become on...
I've formated it already....It didn't have effect
Thanks for help
ps I cant do the hard reset because I dont know what I have to push to do it (foto, record ??!)
try pressing the power button for a long time.
regarding the hard reset. IT's in the WIKI.
or use the search function for "hard reset".

SPV C600 strange problem

Hi guys
there is one SPV C600 which auto power on when nyou insert the battery, then it wont power off with the power button.
if you let it boot, after booting it works ok until you press any key, when youu press any key the phone vibrates and start a powerdown sequence but doesnt power off at all, the blue light shines fro mtime to time, after this if you utry to power it on it doesnt unless you replace the battery, if you let it unattended it wwill reboot itself and stay on until you hit any key and again and again.
For some reason it caant connect to ActiveSync, when you power on thej phone and coonnect it to ActiveSync it automatically power off again as if you typed any key.
Because of automatic poweron the Boot Loader trick for HardReset doesnt works.
I would like to know if someone has experienced the same problems and if some guru has any idea how to deal with this.

P3300 resalvaging

Hi Everyone.
I resently got my best friends P3300 because he really messed it up and would not even boot up!
I got the phone to boot up, but every other application is dead, it wont even make a phone call or even connect to the PC with a usb cable.
The Cell phone shops say they cant fix it and is impossible to fix!
If any one could help me, it would be so apperiated!
try a hard reset to start.
Boot up the phone, when this is done, press red and green. Keep theme pressed and use the stylet to press the reset button (don't release red and green), once the screen changes, release the reset button (keep red and green pressed) you will get a prompt screen.
If I recall well, release the red and green and press green.
This will bring back factory settings.
edit:thanks Zecanilis I sold mine 4 months ago so...
as he shows don't press red and green but the 2 soft buttons.
see here:
http://www.youtube.com/watch?v=VMlLf5Uo-XI
cheers

HTC 8525 white screen

i have HTC 8525 and the screen is messed up it will work for a while then it will turn all white , any advice ?
There are a few theads about this issue already discussed on Hermes forum. Go search there, there are a few solutions, the cause has been narrowed down to the d-pad pc-board.
Hard Reset will do the trick
You need to hard reset the device. Shutdown the PDA completely. Than keep pressing simulteneously both upper buttons on the action button & press the reset hole with the help of the stylus.

Categories

Resources