Hi all,
My XDA IIs works well before. But few days ago the Power button doesnt work properly, it can turn on the phone, hold to turn off the back light, but I can't use it to turn my phone screen off like before. Anyone has same problem ?
Can you see any part of the screen? It might just be that the backlight adjustments are set too low when the unit isn't cradled. You might be able to see the screen in daylight.. or maybe it was inside your home. I forgot where I was at when it happened to me. In anycase, if you can see a bit of images on your screen, go into the Backlight properties and change the setting to your liking.
Good luck..
The problem is i can just press the power button to turn off my phone BEFORE (the screen is completly off), and NOW it doesnt work at all ! When my phone was off, I can press the Power button to turn it on, or when I hold it for few seconds the back light will be turned off, but press once to turn off. I dont know why, if somthing wrong with the Power button it should be doesnt work at all, that's mean i cannot turn on my phone as well. But other functions of the Power button are still work well, except the 'Turn off' :roll:
power off doesn't work anymore
I have the same problem here. I can't use the power button to power off my qtek 9090!!
i can use the power button to turn my pda on and to switch the background light on and off - so the "hardware side" of the power button is working.
however, i can't use the power button to turn off the device. it's very annoying, because i can't put it in my pocket after finishing a call :-(
this should be some sort of a software problem - so i hard resetted my device (a couple of times) - but that didn't help!
can anyone help?
thanks,
lorenz
the ba doesn't turn off it is always on staand by mode. ->settings -> system -> button lock
this will stop any missed call because when the ba is in standby the power button is the only one to work
power on is no problem. i can't put my BA into standby mode. if i press the power button while the BA is turned on, nothing will happen. the screen will stay on, the background light stays on.
i have no way to put it into stand-by with the power button!
try this and see if it works. it's a software app that wil rest, shut down, and turn the screen off. just copy it to your BA temp directory and install it.
power button problem
nemchua
Is your problem solved ?
Because I have the same problem.
Power of switch doesn't work !!!
Any help would be welcome.
power button problem
Does anyone solve the problem???
Had the same problem...
I had the same problem going on for about two weeks or so...never changed anything and it went away all by itself.
The problem has not come back now in over 4 months.
Sure would love to know what the problem was tho...
Greetings,
Noddy
Power Off does not work
Add my name to people with this problem.
The only event I can link it to is this: I deleted my Motorola Bluetooth headset and installed a Logitech headset. I noticed the problem (can't turn OFF with POWER BUTTON) soon after that.
same problem for me ..... someone must know !!!!
I think it is a hardware problem. The contact is not making cleanly. Disassemble and spray time, perhaps.
It's a standard push switch, easy enough to replace, I occasionally list themon ebay but any phone repairier should have them in stock.
Richard
i had same problem yesterday afternoon, but it is ok now. recovered by himself
Write again in two weeks and let us know if it is still healthy. In my case, anintermittent problem became continuous.
Can't turn the screen on after pressing power button
I have a problem with my Bell Atrix. After pressing power button to lock the screen, i can't wake up the screen up by pressing that button again. Could anyone tell me how to fix it pls.
Yesterday I found out I can completely switch off my artemis by holding both soft-buttons and holding the power button for about 5 seconds.
A pop up window appears saying:
Warning
Power will be turned off, and you may lose data if you have not saved them. Do you want to continue?
After pressing yes the screen turns dark and the led's stop flashing. The device seems to have been powered down. When pressing the power button, the device enters the boot screen as if just been given an soft reset.
Couldn't find this in the forum of the wiki, so I thought I wanted to share this.
Regards!
This is standard behaviour on WM-based devices....afaik....
I'm using K's ROM .
Just recently my phone has a problem. As usual when my phone is put idle for a while it'll turn off , and u need to press the power button to activate it right. Then sometimes when i pres the power button, nothing appears in my screen, I press and press nothing happen. Then u can see the power indicator is still blinking. I cant do anything but to reset it by pressing the hole down there with the stylus.
And sometimes when activating , it seems completely shut down and when i press the power button and it shows the start up screen , and the whole PDA is rebooting.
OMG... Is my phone screwed?
you issue is called the sleep of death (SoD), i personally never had that issue, so i cant help you there. but you should search and see what others with this issue did
May help....
DavidZMetal said:
I'm using K's ROM .
Just recently my phone has a problem. As usual when my phone is put idle for a while it'll turn off , and u need to press the power button to activate it right. Then sometimes when i pres the power button, nothing appears in my screen, I press and press nothing happen. Then u can see the power indicator is still blinking. I cant do anything but to reset it by pressing the hole down there with the stylus.
And sometimes when activating , it seems completely shut down and when i press the power button and it shows the start up screen , and the whole PDA is rebooting.
OMG... Is my phone screwed?
Click to expand...
Click to collapse
1. I do believe that was caused by installed softwares,
2. try to remove all today plugins, wait 5 seconds, softreset, after 2 minutes (just to ensure
all processes are finished),
3. try to press the power button then again after 10 seconds, and see if that helps or not, alternatively,
4. try to remove the shortcuts fron the startup folder and try. If nothing helped, probably there is a confused registry. hard-reset for no choice(except you are expert in registry matters )
5. Remember to wait for 10 seconds before you reset the device after changes were made.
thanks everyone!! this problem happens occationally. SO i need a few days to see if the above steps work
Thanks for ur advice again though
How to hard reset I-Mate JAMA? It's stuck on second boot screen.
oqaab said:
How to hard reset I-Mate JAMA? It's stuck on second boot screen.
Click to expand...
Click to collapse
There are 3 way:
1) Start->Settings->System tab->Master Clerar->1234->ok
2)Press soft-reset for 15sec.
3)Remove the battery, Simultaneously hold volume(-) button and red hangup button, while still holding those keys, insert the battery and wait for the led to go out, release keys and device will hard reset.
here is the video just take a look
http://mygsmtube.com/videos/198-imate-jama-hard-reset-howto.html
stuck on startup i- mate jama 100% solve with hard reset,
remove battery, and hold press volume down(-) and power on button siment...
and insert battery, when led goes on, realese button fast. wait few mins. 100% solve..
Hi Friends...:crying:
My Xperia Z1c Phone was good but dont know what happen to it "Power button Stopped Working" all of a sudden.
Phone Problem are:
1) Power Button Not Working
2) Power button function shifted to Volume up key
3) whenever i press volume up key.. volume increases but at the same time power button function activates...i mean it asks for power off, restart,profiles,screenshot... just like power button functions. both power button and volume up key runs when volume up key is pressed.
4) i am unable to turn off my phone... so i had to turn off my phone by pressing volume up key. even it gets turn off it restarts itself. i believe there is some Hardware problem.??
5) when i press and hold volume up key for 3 yo 4 sec it vibrates 3 times and gets turn off just like we do it by pressing the small button next to sim slot.
i think this is strange hardware problem... anybody got solution for this Problem or i need to take my phone to Local repair shop..?
Please help me.......:crying: