If I want to upgrade my ba radio rom which is currently v.1.12 to v.1.13 must I put it on the bootloader mode before the it can be upgraded?
How to put it in the bootloader mode? someone pls. assist. sorry for my ignorance
Read wiki
yeh, just hold down the reset and off button like you do for a hard reset, but also while doin that press the center button(the one inbetween the dirrections) make sure you press all these at tyhe same time...
many thanks trad,
I have found it. like what u said the hard reset way while simultaneously also holding the record button.( the ba site on bootloader mentioned hard reset way plus holding the camera button. in my case it didnot work with the navigational or the camera button but in conjunction with the record button)
doing the hard reset wAY plus holding the navigational button in my experience worked with my xda2.
deeply appreciated..rgds
camera button (left side)
power button (top right)
insert stylus (bottom left)
Do all at the same time
It worked for my UK o2 XDAiis
leslie lee said:
many thanks trad,
I have found it. like what u said the hard reset way while simultaneously also holding the record button.( the ba site on bootloader mentioned hard reset way plus holding the camera button. in my case it didnot work with the navigational or the camera button but in conjunction with the record button)
doing the hard reset wAY plus holding the navigational button in my experience worked with my xda2.
deeply appreciated..rgds
Click to expand...
Click to collapse
hey les,
maybe it could be asian models are made to be "record button instead"
dunno.. many sites said its camera but, its the record button.
Related
hi
my xda orbit keeps rebooting and i cant hard reset it. any ideas guys.
kevin
What happens when you take away the battery and plug it again.
Then You try to boot, it works ?
Then if not you try to hard reset, It works ?
Just to know...
startup bug
hi
when i take the battery out and put it back in the same thing happens i have tried to press in the two buttons and pressing the stylus in the hole but it wont hard reset.
kevin
Did you tried bootloader mode and then flash again the rom ?
how do i do that. i took the memory card out and it rebooted.
kevin
Taken from : http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets
To do a hard reset.
Press both soft keys and insert stylus into soft reset button and press.
Release the soft reset button and keep pressing the soft keys.
When the "This operation will delete all your personal data, to manufacturer default" appears on screen.
Press Green call button to restore manufacturer default, or press other keys to cancel.
The bootloader is invoked by pressing down the Power and Voicedialer buttons simultaneously, and using the stylus at the same time to press the RESET button at the left side. Continue pressing the two buttons for a few seconds after pressing and releasing the reset button until the bootloader screen appears.
startup bug
hi
thanks for your sugestions i took the memory card out and deleted some stuff from it and it works now. this seems to be a problem with the orbit as i have seen a few people mention it on various posts.
kevin
HELP Please.
I just got Samsung i900 Omnia.
after using it for a week i pressed the soft rest button and when the phone boots up it got stuck on the Samsung logo at the beginning and never continue.
I tried to find how to hard rest the phone but no luck
dose anyone have a clue what can i do ??
hold send and end buttons then press soft reset with stylus.
Hard reset
Are you absolutely sure this is the right way to hard reset the Samsung i900 ?
I have tried to do so but no luck
hard-reset i900
The Samsung hard-reset of i900 is pain-on-the-a**....
Hold the End and Send button lightly at the same time press Soft-Reset button with slylus.
Just hold the two buttons light, do not press hard, but to my experience, how light... I really don't know... just try many... many time... and suddently, it come up the hard reset menu.
Sometime it took me about an hour... bloody...
Good luck,
KC
sure, already did it a couple of times. its gonna show you to press send to format the device or something like that.
Thanks,
I have tried it for more then an hour, but i will keep on trying
dude, just lay the omnia on a flat surface, use left pointer and middle fingers to press (and hold) the send and end buttons. with right hand, use the stylus to soft reset the phone. i know i did have to try maybe 2-3 times before i got it right. but after that initial uncomfortableness, the next ones were easier.
tricky part is keeping it still while trying to do it.
i success on my first try thanks for explanation guys
Thanks
Worked like charm !!
The trick is not to let go of the End & Send buttons until the reset screen appear ...
i tried till my fingers are numb.
finally worked. thank you man.
press & hold. really does work. and hold for like..6-10secs.
Re:....
by all samsung (and you can try it !)
to hard-reset your sanmsung you have to enter :
*2767*3855#
in the main screen
you will see that the phone will restart form himself
you haven't to make blooooooody manipulation
IT WORKS
by all samsung (and you can try it !)
to hard-reset your sanmsung you have to enter :
*2767*3855#
in the main screen
you will see that the phone will restart form himself
you haven't to make blooooooody manipulation
IT WORKS
Actually, what I did was press the reset button, while booting up, once the Samsung screen appears, immediately press the call and end key together. It'll ask if you want to reformat, then press the call to accept or end to reject.
darth maximus said:
dude, just lay the omnia on a flat surface, use left pointer and middle fingers to press (and hold) the send and end buttons. with right hand, use the stylus to soft reset the phone. i know i did have to try maybe 2-3 times before i got it right. but after that initial uncomfortableness, the next ones were easier.
tricky part is keeping it still while trying to do it.
Click to expand...
Click to collapse
You are a Life Saver!!!!!! i tried everything to do a Hard Reset and could not. Only after I read your instructions was I able to do it. Thank you!!!
TonynMI
reset samsug i900
dear freunds
my fone is reset after 30 trays u most make fone on
PHP:
and press right and left keytogether after u press reset botten 5 to 10 second. that is very important u less only reset botton but left right key hold press u see 100%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% option 4 format of sacreen work 100%%%%%%%%%%%%%%%%%%%%%%
) if u less right and left key same time with reset key u canot reset u mobile first reset only reset key and hold left right key u see respons
missing internet sharing, omnia i900
Hello I'm new , just got the omnia, but is missing the internet sharing icon ,is there any way to install it ?
How to Hard Reset Your Omnia EASILY
Dear All;
Please use this method to hard reset your samsung omnia i900:
1.Press the soft reset hole beside your power button
2.Press the Call and Cancel Button together when you see the Samsung Omnia on the screen
3.The Reset Screen appear
Just It.
How to hardware reset Touch Pro2?
RHOD100 MFG 32M SS-BC 0.74.1000
I recive answer from HTC:
The way you do a hard reset on a touch Pro 2 is :
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
3. Release the VOLUME UP and VOLUME DOWN buttons, press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset
Thank you once again for your continued patronage.
Best regards, Europe customer support team HTC Corp. Global Service Division
But, this instruction not work.
Try holding the Vol Up and Down together and Reseting with the Stylus. (Just a guess BTW )
P.S. Did you get my PM ?
Thanks
Dave
DaveShaw said:
Try holding the Vol Up and Down together and Reseting with the Stylus. (Just a guess BTW )
P.S. Did you get my PM ?
Thanks
Dave
Click to expand...
Click to collapse
Not Work
Does it get to the point where it shows you a reset message on screen?
This is screen
Goran Anicic said:
This is screen
Click to expand...
Click to collapse
From what I've read about the Topaz:
Hold Vol UP and Vol DOWN together (keep them pressed down and do not release). Then press the reset button with the Stylus and hold it for a few seconds, then remove the stylus keeping vol up and down pressed.
Or if the device is off hold down Vol Up and Vol Down (keep them both pressed until you see the message) and then Power On.
A Hard Reset is usually a two button combo whilst the device is powering on (either from a reset or from a cold boot).
Dave
That screen reads like the software is dead due to it being a beta test.
Jacina said:
That screen reads like the software is dead due to it being a beta test.
Click to expand...
Click to collapse
Yep, but you can still Hard Reset and change the date.
Ta
Dave
I have the same problem. Can anybody PM me with a solution to this? Tried all I know and nothing works...
Ok, here it is.
To hard reset Touch PRO 2 you have to press power + start call (green) + end call (red) buttons. Hold them all and press reset button. Keep holding them untill you see screen that says to press volume up button to reset .
Ciciban said:
Ok, here it is.
To hard reset Touch PRO 2 you have to press power + start call (green) + end call (red) buttons. Hold them all and press reset button. Keep holding them untill you see screen that says to press volume up button to reset .
Click to expand...
Click to collapse
And what am I supposed to do with my other four arms whilst I'm doing that?
rb14 said:
And what am I supposed to do with my other four arms whilst I'm doing that?
Click to expand...
Click to collapse
LMAO now that just made my morning..( idont have a pro2 just skimming through threads lol but u made my day )
daeshawn said:
LMAO now that just made my morning..( idont have a pro2 just skimming through threads lol but u made my day )
Click to expand...
Click to collapse
Haha, me 2.
Think he meant to say, turn the phone off, hold start call and end call keys and then press power on while holding down the two buttons. Nothing needed with the reset button.
Ciciban said:
Ok, here it is.
To hard reset Touch PRO 2 you have to press power + start call (green) + end call (red) buttons. Hold them all and press reset button. Keep holding them untill you see screen that says to press volume up button to reset .
Click to expand...
Click to collapse
yes this is accurate and just so you guys know, this is in the manual lol.
mallman said:
yes this is accurate and just so you guys know, this is in the manual lol.
Click to expand...
Click to collapse
There is this saying amongst IT guys... RTFM = Read the ****ing Manual
hehe mostly the answer is closer than u think
Wrong post.
DELETE
mallman said:
yes this is accurate and just so you guys know, this is in the manual lol.
Click to expand...
Click to collapse
Manual? Think I threw mine away when I got it Never read the manual
Ciciban said:
Ok, here it is.
To hard reset Touch PRO 2 you have to press power + start call (green) + end call (red) buttons. Hold them all and press reset button. Keep holding them untill you see screen that says to press volume up button to reset .
Click to expand...
Click to collapse
Thanks! That did it! Team effort though!
What is this, some pre-release touch pro 2?
Hi.....
I have an wm6 xda with a broken mail button and I'm trying to hard reset it for upgrading. Is there a possible way to do the upgrade with the button while using windows 7 (using WMDC) or I need XP to do it.
Another problem with my BA is
1. If I slide it up, the screen will be distorted and will fade to white.... (Is this a Hardware problem??)
2. My stylus always point is not accurate in one point (the right side).
Are you trying to do the hard reset before or after you flash the ROM? You enter the bootloader first(Record + Power + Reset) Then flash it. Then after its done you press power + record. That should be it. You only need the mail button to do a wm6 hard reset without upgrading the ROM
1. That sounds like a hardware problem
2. Maybe try aligning your screen. If that doesn't help it could also be a hardware problem. How much is it off by?
that is not true, after upgrading you need to hard reset the device, and for that you need the mail button, because after you upgraded and entered the hard reset menu by pressing power+reset+record+camera you set the options right by flipping them all, using the camera and record buttons and then confirm your choice by pressing the mail button.
but i agree about the other problems:
screen - hardware issue
touch - align screen
just my 2 cents
For those of us who get frustrated with the reset button being hidden under the TP2 cover, I'm happy to have just discovered that you don't even need to go there... Just hold down the volume down button and do a soft reset from within the software and hey presto. Same result.
For a hard reset?
Never needed a stylus.
Just navigate to Settings - All Settings - System - Clear storage - 1234 - Done.
Easy enough with my finger.
And where do you find a soft-reset button on you Rhodium??
(I had to install Smaberg's util for a softreset button)
personally I downloaded the "reboot" app from the market place...
ronh said:
And where do you find a soft-reset button on you Rhodium??
(I had to install Smaberg's util for a softreset button)
Click to expand...
Click to collapse
take the cover off, opposite side of the vol. buttons.
Holding down the volume? That doesn't do anything on my Tilt2.
I usually use the HD Soft Reset applet that installs along with HD Tweak (placed it in the TouchFlo Programs tab for quick access). Or else I just hold the power button to shutdown, then power up again. The latter "usually" works when other things on the phone are locking up. But occasionally the phone will be completely frozen, and I need to resort to the stylus button inside the battery cover.
Vol Down? this accesses the boot loader not Hard Reset!
in anycase you don't need the stylus my friend.
Hard Reset : Switch Off the phone, hold call + endcall and power button.
Boot Loader : Switch off the phone, Hold Vol Down + power button.
cheers
^ What he said. I just hard reset the other day using this method, worked like a charm
Any way to reset the phone when it's locked up without taking the cover off?