vito voicedialer - MDA III, XDA III, PDA2k, 9090 General

hi
i need help i download this software but i didnt see a way to use with my ba sx66 siemens anybody have experince if it possible to dial voicedial with bt headset many thank for help

Related

Several problems with my Qtek 9090

And ofcourse hoping to find the answers. I love my Qtek 9090 butt have several problems that i can't find a solution for. So i hope you guys can.
1) My bluetooth carkit and headset lose connection after a while with my device. I've changed the settings from my device in such way that it doesn't switch off out of itself so this is not the problem. Also i've got the new bluetooth radio 3900 on my device. I use a SE bluetooth carkit and a Mr. handsfree Butterfly.
2) On several occasions i've had the experience that my keyboard in TomTom didn't work. The Qwerty keyboard on the phone did work then, butt when you drive with 120km/h you can't slide your phone always and those buttons are to small. Anybody an idea.
3) Doas anybody have a link off a cool ringtone site for me?

Who has a Qtek 9090 and uses it with a OEM BMW BT carkit

If you do let me know if it works the way it should
I'm still having problems using my qtek 9090 on my 3 series BMW with a original BT carkit...
If yours works fine, please let me know wich software is on your PDA and which type of BMW you drive..
I have the following problem... The only way it works is; when I first swich on my car (so also the carkit) and then I activate the bt function on the pda. I also have a solution. That the bt function on my pda is off when the pda is off, but nobody can tell me how this is possible.
Thanks
I can use it as a dumb carkit but it does not sync the addressbook or the SMS
I have a Qtek9100 WM5.0 os 5.1.70 (Build 14420.1.1.0) ROM 1.1.7.5, radio version 01.01.10 and the car is an X3 330D
I found on several forums that you need to be at a higher version.
so if anyone knows how to only upgrade the Bluetooth or a sollution for us

Voice commands and recognition..

Hello all,
I saw that is alot of voice recognition/commands software are spead around the world,
Which program are best to work with SPV M2000 (2003SE) ?
Does anyone can suggest please?
The new microsoft voice command.V1.5 i think?
I am also very happy with Microsoft Voice Command 1.5 US - tried some of the others but I will stick to VC.
But you can't activate a voice-dial from a bluetooth headset (you have to press a button on the handset) *and* it won't listen from the mic in the headset either. It's pretty infuriating.
LONG SHOT: Has anyone hacked the bluetooth stack to allow this?
Chris

Bluetooth Headset Voice Dialing on PPC 6601?

Have they fixed this yet. Is there any software out there for the PPC 6601, that will allow a bluetooth headset to use voice commands to dial or operate the PDA by voice through the headset.
Sprint PPC 6601, running Windows Mobile 2003 CE SE.
Jabra BT800 Bluetooth Headset.
From what I have gathered so far from reading the threads is that I will first need to upgrade to WM5? Will my 128meg of ram be enough for this?
My bluetooth on WM2003 SE seems to be version 1.0 is there a patch to upgrade that to 1.2 or is that WM5 only. Also im new here so if anyone knows any threads that have instructions on how to do this will help me out greatly thx.

HTC P3300 and PARROT CK-3100

I use the Bluetooth connection between the HTC and the Parrot and it works just fine in my car…. As far as the phone hand-free functions are concerned.
When I installed TomTom (ver. 6) on the HTC I assumed that the voice of the navigator would also come out through the car speakers connected to the Parrot.
This is not happening! The phone conversations are going through the Parrot and INDEPENDENTLY the TomTom voice comes out of the HTC!
This creates quite a mess when I am driving (while TomTom navigates) and I get a phone call: TomTom keeps on talking over the phone conversation and most of the HTC screen is covered by the “incoming phone call” notification!
Moreover the ringtone of the HTC does not seem to work when connected to the Parrot and only a very feeble chime is there to signal an incoming call.
Does anyone have a solution to fix this inconvenient situation?
Thanks in advance for the insight!
I've got the same setup as you and have the TomTom voices coming out of the phone which has been the same with my previous phones such as the SPV C550 and he HTC wizard. I think it's down to the bluetooth stack implementation on the Windows Mobile phone. My mobile mutes TomTom when I am in a call and I get a flashing mute icon shown on the TomTom screen.
One thing to try is the Jetware bluetooth extension http://www.jetwaremobile.com/ which is designed to improve compatability with the Parrot systems. It will certainly help you get the correct ringtones through the speakers, though I'm not sure if it will help with TomTom voices.
Neil
Hello
There is a tool cald btaudio i have installed it on my p3300 and when i am connected with my parrot i switch btaudio on and i have tomtom voice true my speakers
I dont know were i dl it but when you google on btaudio sure you be able to find it !!
Greetz
Thanks guys
Sorry I have been so busy lately I barely logged in the Forum. Just wanted to let you know that I have seen your replies and will look into the solutions you suggested. THANKS.. will get back to you soon with (hopefully positive)feedback
Vaguely related and possibly usefull information here:
http://www.modaco.com/Guide-to-usin...oneer-Bluetooth-Car-Stereoand39s-t252613.html
hotatomic said:
Hello
There is a tool cald btaudio i have installed it on my p3300 and when i am connected with my parrot i switch btaudio on and i have tomtom voice true my speakers
I dont know were i dl it but when you google on btaudio sure you be able to find it !!
Greetz
Click to expand...
Click to collapse
Thanks hotatomic! I have installed that appz and it works!!! Great tip!
Any other useful tools for the P3300 we could exchange?
Cheers!
SiperX

Categories

Resources