I am trying to delete the 'My ISP' profile from Network Management in Settings->Connections->Advanced->Select Networks.
Thus, I will set everything to use 'My Work Network', and add a GPRS connection setting there, after I have got wifi working.
Any ideas, on how to remove this default profile?
Lewis
i had the same problem. i found that you could add and delete new connections but even after renaming the connection "my isp" i still could not delete it. im sure there is a registry hack but i dont know it
Thanks for the reply. It is only a slight irritation I guess, yet I wouldn't mind removing it.
Lewis
Related
Hello all,
I am running Black 3x, my question is this, I would like to contact to Cingular's network (data) but do not need or want all the apps it looks like the cab will install. I essentially would only like to use messenger and sync my outlook w/ exchange.
How would this be easiest, when I go to settings/connections/advanced I have the options of "my isp" or "work network" shouldn't there be a gprs or something?
Please help.
Thanks
Search for the cab shogun_cing, Id post it myself but Im not the most technical person here (prob the least) But I have figured allot out by searching as irritating as it can be sometimes, it does help.
See my sig file for a link to wpbears cingular settings cab .... works great
abovenbeyond said:
How would this be easiest, when I go to settings/connections/advanced I have the options of "my isp" or "work network" shouldn't there be a gprs or something?
Please help.
Thanks
Click to expand...
Click to collapse
If you want to do it manually, it's easy:
1. Go into settings/connections/advanced and either choose "My ISP" and "Edit", or "New" if you want to create a new connection. (I always just edit My ISP.)
2. In the "General" tab, enter a name for your settings; doesn't matter what it is. Then click the "Modem" tab.
3. On the Modem screen, click "New." Give the connection a name (Cingular GPRS or whatever you want) and select "Cellular Line (GPRS, 3G) from the dropdown list. Click Next.
NOTE: these settings are for MediaNet; if you're on a PDA connect plan, I *think* you just need to substitute "isp" for "wap" in the following settings, but I'm not 100% sure as I'm not on that plan.
4. Enter wap.cingular as the access point name and click next. Enter [email protected] as the username and CINGULAR1 as the password.
5. Click Finish. On the Network Management screen, make sure your newly-created connection is selected for the "Programs that automatically connect to the Internet should connect using:" box.
6. You may need to go into Settings->Wifi->Network Adapters tab and select "The Internet" under "My network card connects to:"
This should give you access to the Internet, Exchange syncing, etc. Works for me, anyway.
See my sig file for a link to wpbears cingular settings cab .... works great
Click to expand...
Click to collapse
This worked great, thanks.
hi all
i have a xda orbit, aka htc artemis. my service provider, after much delay, helped me to set up the internet settings for my device. now the problem is, they have made me change the port numbers from 80 to 9401 and have set up a connection in "work" settings, whenever i try to download emails from my yahoo account, which supports pop3, it says error in synch and to check my net connection. the same works fine if i connect my device to the pc with internet connection. similar thing happens with most of other apps which use internet
can someone help me on how to change the proxy settings on other apps or how to make other apps use the same connections settings please.
thanks
I just receieved my TP2 yesterday from mobilephonesdirect (with a T-Mobile contract).
I've run into a problem with trying to browse to secure sites or access my hosted exchange and pop email accounts (both over secure connections).
Activesync returns the error "ActiveSync cannot reach the server. Check that the server address and proxy server settings are correct.". Trying to browse to a https://... address in opera mobile causes it to crash, and in IE I get a dialog saying it cannot find the url and "Make sure the path or Internet address is correct."
I did discover this thread over at expansys about the same problem with the Touch Pro (http://www.expansys-usa.com/ft.aspx?k=113037) but following the steps doesn't work for me, unticking the "This network uses a proxy server to connect to the Internet" option just reticks it the next time I view the settings.
I can't find any settings different between my new TP2 and Vario3 so I'm stuck. Has anyone else had issues?
It's fixed now
I did a soft reset and then the unticking the proxy server setting actually worked. Not quite sure why the TP2 requires this to be unticked yet my Vario 5 is working with it ticked.
Doesn't work
I can untick the proxy but this doesn't solve my activesync/exchange problem. I can access POP3 email etc fine and access my exchange account over wifi or via USB, so I assume it's a T-mobile issue. Anybody any help? I have tried searching and the only other h suggestion was to change proxy server to end in .135 instead of .132, but this doesn't work either.
Now does work
Had to delete the T-mobile settgins that wereautomatically configured, restart,then do the automatic configuration again, then uncheck proxy box before making any connections, then restart and voila!
About once a week, my phone will have the proxy on MediaNet set to my work computer's network proxy.
This only affects Google Maps' ability to see traffic but I use that function a LOT.
For some reason, I am unable to change it in connections because it says MediaNet is pre-configured and doesn't let me change it there. To fix it, I have to delete the content of the proxy server in a couple places in the registry but that is a pain in the butt.
1. Does anyone know how to prevent either of my sync'd computers from changing the proxy server on my phone?
2. Does anyone know how I can access Media Net's settings through "Connections" and not through the registry?
PRetty much says it all. I was running titanium, Energy rom. Battery went dead, and now I can't access my email. In titanium it still shows my email account, but if I click on it, nothing happens. If I turn on Max Sense, I can read all of my old emails on the email screen, but I can't view any of them. If I click the mail link through the start menu, it only offers to setup a new account. If I do, and enter the same account name, it says the account name already exists.
Anyone know how to reconnect the email box? I am guessing it is something in the registry?
dbtfree said:
PRetty much says it all. I was running titanium, Energy rom. Battery went dead, and now I can't access my email. In titanium it still shows my email account, but if I click on it, nothing happens. If I turn on Max Sense, I can read all of my old emails on the email screen, but I can't view any of them. If I click the mail link through the start menu, it only offers to setup a new account. If I do, and enter the same account name, it says the account name already exists.
Anyone know how to reconnect the email box? I am guessing it is something in the registry?
Click to expand...
Click to collapse
The easiest thing to do (if you turn on MaxSense) is to go to the Mail Tab, press Menu > Account Settings > Delete the e-mail account. Then you can recreate the account.
This has happened to me and several others in the past. Although, this hasn't happened to me for a few months now, and I don't know what causes it.
Thanks! You led me right to the solution:
If you go to the mail tab, press Menu, got to account settings, then instead of deleting the account, click edit.
Amazing! There is no incoming or outgoing server info in there!!! Weird! I replaced it, also had to replace my password, though username was ok. And Voila! Got my email box back.
Thanks again.
Still no idea why this happened. At the same time my 3G stopped working. I had to resetup my ATT connection, and also had to go into communication manager and turn on data connection. Super weird. Anyone have any ideas?
dbtfree said:
Thanks! You led me right to the solution:
If you go to the mail tab, press Menu, got to account settings, then instead of deleting the account, click edit.
Amazing! There is no incoming or outgoing server info in there!!! Weird! I replaced it, also had to replace my password, though username was ok. And Voila! Got my email box back.
Thanks again.
Still no idea why this happened. At the same time my 3G stopped working. I had to resetup my ATT connection, and also had to go into communication manager and turn on data connection. Super weird. Anyone have any ideas?
Click to expand...
Click to collapse
Hmm...When I tried to do that when this happened to me, it didn't even recognize the accounts! All I could do was delete them. You got lucky! Glad you got it working, though!
Maybe you could try reflashing your radio (since your 3G stopped working -- unless, of course, AT&T's towers are down in your location). Or you could try forcing your phone into 3G in Comm Manager (tap the 3G bar > Network Type: WCDMA > Done) then go to Start > Settings > Connections > Connection Setup. The latter method sometimes helps me reconfigure my data.
Thanks for this idea, it fixed my identical email problem too. I think somehow the 3g connection setup wizard is erasing the email server settings. It might also be resetting the credentials in the registry. I had to reenter my activesync server password which still worked besides that.
I rebooted my phone and couldn't get the 3g to start. It wouldn't even try. I've manually fixed the auth fail type of errors before, where it starts to connect, drops, and retries. But this wasn't even starting to connect, so I reran the setup wizard.
The really strange part about being able to restore the server settings via sense is that the mailbox doesn't even show up in the normal windows mobile email settings program. If it wasn't for sense I wouldn't have been able to fix or delete this mailbox.
...
Problem Solved