GPRS/MMS not working with XDA IIs - MDA III, XDA III, PDA2k, 9090 General

i always get this error message:
The answering modem has disconnected. To check your connection settings and change them if needed, tap Settings.
i have already set my gprs/mms settings. i tried using my sim on another fone and i was able to send/receive mms. anyone encountered this error?
btw, any smart users here using xda 2s? any one of you having problems sending/receiving mms and accessing gprs? i used the automatic configuration whenever the phone performs a hard reset (xda 2s phone bought from smart has an automatic configuration both for smart and globe). i also tried using the cab file from http://forum.xda-developers.com/viewtopic.php?t=20826.
tnx!

Try a manual setting -- http://forum.xda-developers.com/viewtopic.php?t=21900 has a Virgin setting tutorial. That might help!

Dilip, I noticed that you live in India and would like to know if you have GPRS working. If so, what carrier are you using? I'm using Hutch and was told that they didn't support GPRS on Pocket PC phones, which is hard to believe..

Cingular
I am looking for help with GPRS/MMS on an XDA IIs activated on Cingular.

contact your service provider they will give you your gprs and mms settings. im thinking we should have a sticky for this.

HUTCH GPRS SETTINGS
Hi aragorn121
HUTCH GPRS WORKS PERECTLY FINE ON Xda iiS
MOST OF THE HUTCH CUSTOMER CARE CENTERS ARE UNAWARE OF THIS...
I AM ATTACHING A FILE WITH THE HUTCH GPRS SETTINGS SENT ORIGINALLY BY HUTCH GPRS ENGINEERS.
BUT A WORD OF CAUTION: GPRS IS GVING PROBLEM WITH 1.31 ROM ... SO I RECOMEND YOU UPGRADE TO 1.40 ROM AND U WONT HAVE ANY PROBLEMS ATALL IF U FACE ANY RIGHT NOW WITH THESE SETTINGS.
AND REMEMBER TYPE ADDRESSES IN ADDRESS BAR AS WSP://WAP.YAHOO.COM, ETC... IF U USING THE HUTCH rS.99 WAP CONNECTION!

COnTD... hutch gprs settings!
IN GPRS SETTINGS IN CONNECTION MENU.... MAKE SURE YOU HAVE IT SET AT PAP AUTHENTICATION AND CLASS 8 FOR HUTCH ATLEAST!
happy surfing! do reply me back about your experience!

Related

GPRS Settings!

Hi! I Have an xda2s,i have brought this phone from UK and i want to use gprs settings from a network provider in india.But,unfortunately the network provider in india doesnt have any setting for ANY WINDOWS BASED MOBILES. IF i can give u setting for other phones,can u please create settings for my xda2s. The website of my network provider is http://www.spiceindia.com/gprs/gprs_main.shtml Here you can find setting for different phones.PLease let me know how can i use these settings. Thanks.
Nish
here try the attached pdf........ it's an example settings guide
Indian XDA 11s owner who's been able to use GPRS
hey, any xda iis owner from india who has been able to use GPRS successfully??? any network!
please share ur experiences - users from india about gprs on xda.....
anyone can provide me settings which work for hutch, airtel, bsnl, spice, etc????
Gprs india
Hai
I am using airtel india gprs for a long time
Thanks
S.Raja
Airtel gprs settings!
on which handset have u been using?
what settings have u been using for connecting and what plan do u use?
thanks in advance!
I've been using GPRS on my XDA 2s from Dolphin (MTNL Delhi). Setting it up is very easy, just input the APN (for Dolphin its "gprsmtnldel" and the user name/password. Don't input anything else like server address etc. It works like a dream!
@PappaDocta
How do you open the MMS Composer? I couldn't find it
mms composer
in the messages menu, click the inbox arrow and scroll for MMS inbox....there are 3 inbox....mms, msg and mail....in mms inbox select new and there ur............
GPRS and MMS Settings for MTNL
Hi all,
I had a tough time finding out the GPRS and MMS Settings for MTNL, New Delhi, India. I have finally found them and my Internet is working fine, I thought I might share them with you.
Here they are:
GPRS
APN: gprsmtnldel
Wap gateway: 172.16.31.10
User: mtnl
Password: mtnl123
Port: 9201
Homepage: http://localhost/home.wml
MMS
Server IP: http://172.16.31.136/mms/
Configure Device for WAP Access
1 Tap Start
2 Tap Settings
3 Tap Connections tab4.Tap connections icon
Now
1 Under My ISP, select Add a new modem connection
2 Enter a name for your connection: MTNL_GPRS
3 From the Select a modem drop down choose Cellular Line (GPRS)
4 Tap Next
5 In the text box labelled (Access point name) type in
for post-paid : gprsmtnldel
for pre-paid : gprsppsdel
6 Tap Next
7 Enter User name mtnl , Password mtnl123, Domain leave it as blank
8 Tap Finish
9 Do not change any thing else in the setting
10 Tap OK twice.
Now you Tap to manage existing connexions under My Work Network or My ISP ( that you have created above)i.e MTNL_GPRS.
Hi,
Does anyone have GPRS settings for HUTCH [ DELHI ] please?
My O2 mini s [ Wizard ] works on HUTCH ACCESS which costs 699-00 per month Rental.
I want to use this on Normal GPRS Plan [ rent Free..only charged for usage and downloads ]
It would be a great help.
Thanx In advance.
-jeasbe'
N Delhi
Anybody there who can explain how to set mms setting on Wizard. My GPRS settings are working fine.
GPRS windows mobile phones
I am using GPRS All networks india supports that.I am using o2 xda IIs with airtel and aircel successfully
Hi..
I am trying to connect my HTC WM6.5 based phone to internet via gprs. I have installed these settings.
Following Settings are under Modem settings. :
Connection name : MTNL GPRS
Access Point Name : gprsmtnldel
And Following settings under proxy -> wap proxy settings
Wap Server : 172.16.31.10
Port : 9201
Username : mtnl
Password : mtnl123
But cannot connect to the net. The phone tries for a while then shows "Could not connect due to unknown reasom"
Than I check for settings again, the password I entered had automatically changed to a 12 letter word.
Please help me configuring windows mobile.
hi
very coooooool pro make gprs configurtion

Orbit trying to use GPRS for SMS !!!

Hi
I've had my orbit a few months. Nothing out of the ordinary loaded on it :-
Opera
XnView
TCPMP
SK Tools
Battery Status
A few days ago it started throwing up a network logon box every time I receive or send an SMS. I have 2 dummy connections setup for Internet and Work so that it will not connect to GPRS without me knowing - I did this since day 1 with no problems. It means I can be absolutely sure that I am not getting GPRS data charges without me intitiating it.
So, it would seem that my orbit is trying to use GPRS for messaging. I've changed the setting from GSM preferred to GSM only, but this has not stopped the problem.
Can't recall any software load or changes immediately prior to this happening.
Any suggestions?
Michael
Well I can answer my own question - I had received an MMS and it was trying to dial out to get the photo !!
Michael
goto start-setting-connections and click on sms service change it to gsm preferred.
to disable GPRS use this utility
http://www.benrichards.co.uk/?p=180
toggle and disable or enable

GPRS settings (or any other paid settings)

I want to change some settings of my Trinity (running WM6 on it)
I only want to use my network for calling, recieving/sending sms and recieving/sending mms. And not for internet by using GPRS or any other paid connections. What do I have to change in the settings?
The only way that I want to use internet is by ActiveSync, WiFi or bluetooth.
I have a dutch provider (Telfort, free roaming on KPN-network) I don't think that this is important but it can't harm to tell you
I also don't mind when you want to answer in dutch but english is oké to!
Markos said:
I want to change some settings of my Trinity (running WM6 on it)
I only want to use my network for calling, recieving/sending sms and recieving/sending mms. And not for internet by using GPRS or any other paid connections. What do I have to change in the settings?
The only way that I want to use internet is by ActiveSync, WiFi or bluetooth.
I have a dutch provider (Telfort, free roaming on KPN-network) I don't think that this is important but it can't harm to tell you
I also don't mind when you want to answer in dutch but english is oké to!
Click to expand...
Click to collapse
Go to Start, Settings, Connections, Connections, Advanced, Select networks and check your settings.
If not possible, in worst case delete the settings for GPRS.
But what do I have to change there?
Markos said:
I want to change some settings of my Trinity (running WM6 on it)
I only want to use my network for calling, recieving/sending sms and recieving/sending mms. And not for internet by using GPRS or any other paid connections. What do I have to change in the settings?
The only way that I want to use internet is by ActiveSync, WiFi or bluetooth.
I have a dutch provider (Telfort, free roaming on KPN-network) I don't think that this is important but it can't harm to tell you
I also don't mind when you want to answer in dutch but english is oké to!
Click to expand...
Click to collapse
You won't need a data connection for voice calls and SMS but you will need one for MMS messages. Go to Start/Settings/Connections Tab/Connections/Tasks/Add a new modem connection. Name the connection anything you'd like or leave as My Connection, select Modem as GPRS, 3G, then all you need is to enter is the APN name which I believe for Telfort is: internet. Leave all other settings default. You will also need to enter the MMS settings for Telfort; let me know if you need help with that.
If you have existing settings you can also go to Start/Settings/Connections Tab/Connections/Tasks Tab/Manage existing connections and enter the correct APN.
I have entered the correct mms settings (at least, I entered the settings that are given on the telfort site for pda for WM5. But I guess it will work fine on WM6 to )
So the problem isn't that I don't know how te use my mms. But I want to be sure that it doesn't make any other data connection. For example a internet connection or any other data connection except sending/recieving mms.
Markos said:
I have entered the correct mms settings (at least, I entered the settings that are given on the telfort site for pda for WM5. But I guess it will work fine on WM6 to )
So the problem isn't that I don't know how te use my mms. But I want to be sure that it doesn't make any other data connection. For example a internet connection or any other data connection except sending/recieving mms.
Click to expand...
Click to collapse
MMS will use GPRS when sending or receiving, so it uses the same access point as if you were using Internet Explorer. If you are trying to not use any data it won't work. Internet Explorer or Email Account will also use GPRS unless you have an active Wi Fi session open. I'm not sure if Telfort allows MMS server access if you don't go through their APN, so using Wi Fi with MMS may not work. You'll have to give it a try.
Isn't it possible to say that only mms has the rights to use gprs. And to only block internet and e-mail from using gprs?
Markos said:
Isn't it possible to say that only mms has the rights to use gprs. And to only block internet and e-mail from using gprs?
Click to expand...
Click to collapse
This may be possible by editing the registry. Maybe someone in this forum knows how to do this. I'll do some research and let you know if I find an answer.
Ok I hope that it is possible. Everytime when I use WiFi at this moment, I'm in complete fear No but I will be more relaxed using my phone to the max, knowing it won't cost me a thing
Markos said:
Ok I hope that it is possible. Everytime when I use WiFi at this moment, I'm in complete fear No but I will be more relaxed using my phone to the max, knowing it won't cost me a thing
Click to expand...
Click to collapse
I found this thread regarding this issue:
http://forum.xda-developers.com/showthread.php?p=1629748
I'll keep looking for more information.
Go to a telfort shop let them delete your apn settings

GLOBE GPRS settings for Cingular 8525

hi! does anyone have a working globe gprs settings for Cingular 8525? Netwiz is not working on the Cingular 8525, it says it is only designed for dopod devices only..
Globelines
Bro you can call their hotline 919-8888, they will really help you.
---------
Softbank X01HT
Binky11's 3.3
SPL 2.10 Olipro
SuperCID
Radio: 1.54.30.10
4gb Sandisk microSDHC
what's your rom?
I'm using different WM6.1 roms, and everytime i flash a new rom, i use either Netwiz or Connection Setup, and they automatically configure my MMS/GPRS. Works everytime.
I'm using a post-paid Globe sim.
I think there's no globe gprs settings 'coz every service provider they have their own gprs settings.
The easiest way that you run Connection Setup, it will configure your GPRS settings automatically.
uroif said:
I think there's no globe gprs settings 'coz every service provider they have their own gprs settings.
The easiest way that you run Connection Setup, it will configure your GPRS settings automatically.
Click to expand...
Click to collapse
If i'm not mistaken, he's referring to Globe, a service provider in the Philippines.
i think you need to activate first to your network b4 you can use it.
Install Connection Setup Wizard
sorry double posting
Install Connection Setup Wizard
Bro install this and it will get your gprs setting automatically by selecting country and provider
Hope this helps
http://www.mediafire.com/?mdyjgwydjhb
nice mga kabayan
thanks for the tips!!
hello mykepimentel how to install that?
i nid also gprs settings for xda atom..
can anyone give me?? thanks..
under settings, connections tab, go to the connections icon, click add a new modem connection, type whatever name you wanna call your connection (i.e globe GPRS), under select modem choose cellular line (GPRS,3G), click next, type internet.globe.com.ph under access point name, click next, click finish, that's it!!!

Cannot connect EDGE problem.

Hi Friends!
Now seems that I have a serious problem, my Diamond still with the "Cannot connect" problem, displaying the following message in any data transfer attempt:
"Cannot connect for an unknown reason. To check your connection settings and change them if needed, tap Settings. If the problem continues, reset your mobile device according to your manufacture's documentation and try again."
It started just after updating from TLR2 to TLR3 ROM and Unsigned Hard SPL from OliNex, where radio version also changed.
Before that everything was working nice but now I have nice voice and WIFI quality, GPS and SMS are working as it should, but no GPRS/EDGE data connection.
Ive checked the connection settings lots of times, tried all RADIO versions and reflashed the following ROMs with the following Claro (Brazil) connection settings:
Settings > Connections > Connections > My ISP
APN: claro.com.br
User: claro
Pass: claro
Proxy settings: Only first box checked.
Tried setting network band manually for GSM, PAP and CHAP authentication, enabled and disabled HSDPA without success.
ROMs flashed for tests:
- RUU_Diamond_HTC_Europe_1.35.401.3_Radio_Signed_Diamond_52.26.25.09_0.93.25.26_Ship
- RUU_Diamond_HTC_WWE_1.37.871.3_Radio_Signed_Diamond_52.26a.25.09_1.00.25.03_Ship
- RUU_Diamond_HTC_WWE-ME_1.93.456.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
- tlr-diamond-2.08.07.01
- tlr-diamond-3.08.07.16
The same SIM card works perfectly in another cell phone, so I think it isnt the problem as shouldnt be with operator CLARO, here in Brazil.
Ive noticed, doing some internet search, that this problem used to happen in other HTC models, but I couldnt figure a way to solve the problem or what were its true origin.
I really need some help with this issue, since data transfer is very important to me.
Tnx in advance for your attention and help!
Alfatag said:
Hi Friends!
Now seems that I have a serious problem, my Diamond still with the "Cannot connect" problem, displaying the following message in any data transfer attempt:
"Cannot connect for an unknown reason. To check your connection settings and change them if needed, tap Settings. If the problem continues, reset your mobile device according to your manufacture's documentation and try again."
It started just after updating from TLR2 to TLR3 ROM and Unsigned Hard SPL from OliNex, where radio version also changed.
Before that everything was working nice but now I have nice voice and WIFI quality, GPS and SMS are working as it should, but no GPRS/EDGE data connection.
Ive checked the connection settings lots of times, tried all RADIO versions and reflashed the following ROMs with the following Claro (Brazil) connection settings:
Settings > Connections > Connections > My ISP
APN: claro.com.br
User: claro
Pass: claro
Proxy settings: Only first box checked.
Tried setting network band manually for GSM, PAP and CHAP authentication, enabled and disabled HSDPA without success.
ROMs flashed for tests:
- RUU_Diamond_HTC_Europe_1.35.401.3_Radio_Signed_Diamond_52.26.25.09_0.93.25.26_Ship
- RUU_Diamond_HTC_WWE_1.37.871.3_Radio_Signed_Diamond_52.26a.25.09_1.00.25.03_Ship
- RUU_Diamond_HTC_WWE-ME_1.93.456.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
- tlr-diamond-2.08.07.01
- tlr-diamond-3.08.07.16
The same SIM card works perfectly in another cell phone, so I think it isnt the problem as shouldnt be with operator CLARO, here in Brazil.
Ive noticed, doing some internet search, that this problem used to happen in other HTC models, but I couldnt figure a way to solve the problem or what were its true origin.
I really need some help with this issue, since data transfer is very important to me.
Tnx in advance for your attention and help!
Click to expand...
Click to collapse
Some news:
Finally Ive discovered that my Daiamond is from Honk Kong after searching its part number.
I downloaded the RUU_Diamond_hTC_Asia_HK_WWE_1.93.831.1 ROM and got a surprise that it now have the Claro, and other operators from Brazil, connection settings in HTC Connection Setup, so the connection settings itself shouldnt be the issue.
The "cannot connect" problem persists...
I should donate to someone that can help me solve this problem, since I dont have any more hints to solve it...
Tnx!
Alfatag
Any settings in your Proxy settings field?
Laubscherc said:
Any settings in your Proxy settings field?
Click to expand...
Click to collapse
Hi Laubscherc;
Double checked that too, even in automatic settings from "HTC Connection Settings Tool"
Anyone knows if there is any way to make any kind of log or debug to see while it tries to connect?
I think Im getting some hint about my problem with EDGE/GPRS connection. Ive entered field test mode by dialing *#*#364#*#* and in the Group GPRS / E-GPRS I can see some fields displaying 255: <Unknown> parameter.
Some of the fields are RLC: Uplink Coding Scheme, RLC: Downlink Code Scheme, MAC mode and others.
I think it should display the settings to work with my operator, but the question is why they arent filled and how to correct this? There some kind of editor for those settings?
alfatag i have exactly the same problem as you.. and as you too don't know how to figure it out. Allready posted a thread here as you did, but nobody helped. I hope some one who know a lot about the subject can help us. At least is better now, i was thinking i was the only one who have such a big problem. ^^
If u want to, add me on msn = [email protected]
BYE
Same problem with Edge Connection
I´m facing the same problem. Have someone resolved this issue? I´m using the Claro operator too.

Categories

Resources