Hi,
Does anyone know how to disable rom version to display during device start up? It always showed at the splash screen each time i soft reset my device.
And btw, is there anyway to enable sound during boot up as well?
Coz i do recall when the first time i start the device i did here a sound... but now no more..
pls help !
Related
I was upgrading my O2 xda II. suddenly my laptop battery died & system went into hibernation mode & as such upgrade was interrupted. My device was dead & it's Screen dosen't displays anything other than O2 logo.
I tried to start upgrading process all over but windows dosen't recognizes the device or finds the device to b turned off.
Pls advice me Wat can i do to turn my device on.
Pls..................................
The same happening to me . My device blank, window cannot recognize . Please is anyone can .please HELPPPPPPPPP>>
Hi Adeev,
Put yr device into bootloader mode and then redo the upgrade...I hope u know how to go into Boot Loder Mode...
Hi Adeev,
Put yr device into bootloader mode and then redo the upgrade...I hope u know how to go into Boot Loder Mode..
Thank's for ur reply bro. I tried to put device into bootloader mode (power+reset+Dpad) but it isn't working. the splash screen isn't gone yet. For how long do i have to hold these buttons. Do i have to hold these 3 together or press them one by one. Pls send me some more details. Thanks
Thanks u
hello frnds,
thanks a ton for ur help. My device is working & even better than before.
once again thanks u for ur kindly help.
May god fill ur file with happiness & prosperity.
Once again thanks
Regards,
Adeev
Hey Guys, so I have done the stupid thing and flashed my samsung blackjack i600v with the update from samsung.com WM6 (think made for the i607). The phone starts up normally displaying the green WM6 screen and goes into the At&t (orignally vodafone) screen, runs across the screen says goodbye and swtiches off. Sometimes if i press buttons and try and make it think i can get to the home screen but then again, it turns off. Any possible ways that I can flash it back or make it work again?
Anything, a program, tools how on earth do you format a mobile phone back to normal.
Any help or direction on this would be greatly appreciated you have no idea.
Many thanks
Kam
Anyone? please help..even if its to say that the phone is not able to be fixed.
thanks
Can You get into bootloader?
If You can - You need to find a full i600 ROM with Radio part and flash it.
Edit: Here is a LINK - check it - there's a link for ROM also
Hi there, I can turn it on n get it into bootloader mode, it says AT&T bootloader! But it's not being recognized by the computer, what is this radio part? I have downloaded theb ROM!
Thank u
Please help me,
I was success update ROM but after reebot just show white screen.
i have same problem. at the same time, ActiveSync can't connect to touch pro2.
ahhhh
mine just did this too! help. just site on white screen with the BRPD information at the bottom
Hey guys, just a quick note, I had this screen too, I went to the HTC Mobile Product support webpage, and, when I put the HT2 into bootloader screen (power on while holding the down volume), I was able to install the original ROM that ships with the phone, and its working again.
On the HTC Mobile product support page, you can click more info for exact instructions on how to install this ROM.
Good luck. I was scared ****less that I had messed my phone!
Okay, I was just changing the startup screen on my Samsung SCH-i760 (WM 6.1) from the animated Verizon splash screen to a new one I just made, and now my phone freezes as soon as it loads to that screen on startup. I have tried soft resetting 3+ times. I can't start the device at all, so there's no way for me to get on to change it back, if thats the problem. What should I do!? I need my phone! Somebody Help Please!!!
This is what I did. I made the file using GIMP. Saved it as a gif, named as "VerizonStartUpAni.gif". I put it in My Documents on my phone, and then moved it to "WINDOWS" with Commander. Then yeah, I copied it over it bad move. After that I soft reset my phone and it seemed fine, until it got to my new startup screen. It just stays there. I left it alone for over 5 minutes and it was still stuck there.
What should I do!? I need my phone! Somebody Help Please!!!
My new startup screen is attached blow. Maybe someone could tell me what I did wrong with it? Feel free to use it if you want!
Thanks in advance!
Hannah4Evr
My new startup screen is attached blow. Maybe someone could tell me what I did wrong with it? Feel free to use it if you want!
You just need to apply Hardreset. But it will erase all your data to default.
http://ars.samsung.com/customer/usa...D=557&PROD_SUB_ID=561&PROD_ID=833&AT_ID=91422
That's what I ended up doing I didn't have anything backed up either... Thanks for the reply!
Hi I have and IMATE PDA2k EVDO and I tried a d-two rom and I now have the device sitting on the 4 color screen every time I reset it. Any idea how I reset it back to defaults so I can load another image onto it, I have the original image. any advice would be appreciated.
Thanks,
Actually I just fixed it.
Anyone know of any WM5,6 or 6.5 roms that work on this phone. The EVDO network is dead here in Australia so I just want to convert it into a PDA.
For the love of God... if you are going to make a thread saying "Hey guys, I broke this, how do I fix it?" Do not EVER update with "I fixed it!" without telling us HOW you fixed it.
I thought it was such simple fix it did not requiere explaination. To enter the bootloader you do the following
Press Power + record (above the volume slider) + softreset at the same time.
This puts it into the load mode so you can reflash.
problem with my xda iis
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
jayreyes_31 said:
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
Click to expand...
Click to collapse
about WM 6 rom, maybe you can look at ftp://ftp.xda-developers.com/BlueAngel/Shipped_Complete_Updates/
or at http://shipped-roms.com/index.php?category=windows mobile&model=Blue Angel
try to flashing rom again
You sir are an idiot.
A Blue Angel rom will not work for a Harrier.
So delete your comment because some other idiot will follow your bad instructions then **** up their phone and make another idiotic post.
Yea so did anyone figure out this whole problem with the white boot loader screen? I'm no where near a programmer or anything but I think my boot loader version is out dated. My HARRIER, not blue angel, is stuck at a white screen that reads Serial(USB when connected to usb of course) and v1.02. I've had a Harrier before this and it had the four color screen for boot loader. Am I on to something here?
Oh btw I already tried to reflash the rom over and over but updater keeps saying it can't connect.
jayreyes_31 said:
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
Click to expand...
Click to collapse
I have the same problem, anyone found a fix?
yes I have too same problem..plz help
i have a problem
Obviously.
But which one?
Tell us as elaborate as possible.
Problems Blue Angel Harrier Alpine
B-44 said:
Obviously.
But which one?
Tell us as elaborate as possible.
Click to expand...
Click to collapse
Please be careful: This is a Blue Angel (BA) Thread!
As Hima and Alpine Fora are closed, i will try to help as well as possible,
but please post marked "off topic"- hope moderators won't intervene...
And always first work out which device you're talking about.
Still love Alpine...
@admin: I know it's quite impossible to keep all these legacy threads alive- but what about some rescue thread, e.g. for non-touch-screen-phones,the Hima-BA-Family?
As i know from Siemens/BenQ Phones, it has gone silent around here, but from time to time some collectors appear which shouildn't be left alone.