Quite BT headset(s) - MDA III, XDA III, PDA2k, 9090 General

I have two BT headsets. A Jabra 200 and a Motorola HS850. In both cases, people who I call are reporting that they both sound quite and distant.
Has anyone else noticed this and if so, what was the cure.
I am running 3900 BT stack and the microphone AGC is turned on.
Sorry if this has been asked before, I did a search and couldn't see anything.
Regards

whats your radio version?
1.02 seems to suffer quite bad ..
should upgrade radio to 1.12

The Radio is 1.06.00 - does this also have problems??

Have a look here:
http://forum.xda-developers.com/viewtopic.php?t=22453
I have the HS850 working perfectly.
Check my .sig for my config.

Related

BT Headset Problem with radio version 1.13.00

I am having problems with my motorola BT headset. People don't ear me. They tell me that there is impossible to ear what I say. Do you know if it is a common problem? if so is there any patch to fix it? or must I change the radio version of my phone?
Thank you
dcoelho said:
I am having problems with my motorola BT headset. People don't ear me. They tell me that there is impossible to ear what I say. Do you know if it is a common problem? if so is there any patch to fix it? or must I change the radio version of my phone?
Thank you
Click to expand...
Click to collapse
Are they not hearing you at all or is there a lot of static? I had static isues. After upgrading to BT 3900, all better.
I think it is lots of statice. They refer so much noise. How can I upgrade BT?
Try another bt headset, that's was really my problem too with a nokia headset. now with my sony hbh-608 everything it's ok...
And 3900 broadcomm stack too.
Regards

Qtek9000 and Jabra BT 620s

Hello, i bought Stereo bluetooth headphones JABRA BT 620s. Connected them to maj Uni and phonecall is OK. But when i want listen music the music is interrupting and sometimes the music going slower and slower. It seems like old gramophone whne u put finger on gramophon record during playing.
I upgraded Uni to Helmi AKU3.5 ver 1.3 and radio to 1.14.10 but no change ...
When i connect these phones to my friends mobil SE W710i it works perfectly ... If i asked about this problem contact centrum of Jabra they said that probably Bluetooth hasnot enough capacity ??? I hope its not truth...
Somebody has some idea how to repair this problem ?
Thank you
Me too
Hi,
had the same problem. I tried several tips published on this forum without any success. I was told by the dealer where i bought it that they also thought it would not work. I could bring it return without problem.
I am still looking for an alternative (BT, Stereo, microphone), preferably in-ear solution. Anyone an idea?

poor A2DP quality

I have Moto HT820 and JasJar with latest _official_ i-mate ROM. I applied the Tornado patch to get the Stereo Profile.
The sound works OK, except there is a lot of noise and distortion.
I've applied BitPool and SampleRate reg hacks but they dont seem to make any difference.
Anything else i can try?
Same here
I have a Motorola HT820 with my Qtek 9000 and the sound is really bad.
My friend has a Sony Ericson K800i and it works perfectly, the sound is great but with my Universal, the sound is very bad!!
Anyone has a trick or patch for A2DP?
Regards
try updating the firmware of your ht820 headset...the update is there in the forum..also, try using helmi's broadcomm stack http://forum.xda-developers.com/showthread.php?t=291639..works perfect with my uni+jabra bt620s
rhn said:
try updating the firmware of your ht820 headset...the update is there in the forum..
Click to expand...
Click to collapse
the update (which is at http://forum.xda-developers.com/showthread.php?t=276406 ; I've also linked in from my related article at http://forum.xda-developers.com/showthread.php?t=296770 ) will "only" fix the skipping problem; NOT the bad compatibility with the MS BT stack.
That is, the only way to fix the problem is 1, getting a compatible pair of headphones 2, changing the BT stack to Widcomm
see my post at
http://forum.xda-developers.com/showpost.php?p=1215382&postcount=133
in short, Widcomm is a bad choice for jasjar/HT820 headset.
At this point I think i fixed the quality (or got used to it), because i dont hear much difference when streaming music from PC vs jasjar.
The only BIG annoyance is the skips/pauses. Must be the damn phone doing something in the background!

XDA IIs Stereo audio problem

Has anyone ever had anything like this problem?
I can not get my device (O2 XDA IIs) to output both channels of stereo audio.
I have upgraded the rom to what i thought was the latest (june 2005)
http://www.seeo2.com/user/XdaIIs/template/XdaIIs_ROMUpgrade_Jun2005.vm
Code:
English ROM
ROM: 1.40.00 WWE
Date: 03/10/05
Radio: 1.12.00
Protocol: 1337.42
ExtROM: 1.40.923 WWE
MMS: 2.0.0.21
BT: 1.0.0 Build 3900
I have tried several different media players, from windows media player 10, sompy media, and a few others, with no change.
I have tried several different stereo headphone/earbud combinations, which have worked on other 2.5mm socketed devices, no luck.
I am dreading the possibility its a hardware issue, so asking around before i start looking for service centers.
Can anyone shed some light? or have a similar issue?
Thanks.
It's a problem.
Your device cann't output anything by earphone?
It can output only a single channel.
The right channel is fine. good volume/frequency etc.
Handsfree kits are fine, mic and earbud works no problem.
It's just when i connect a stereo headset to it, no left channel audio.
I've more or less resigned myself to buy an overly expensive pair of bluetooth headphones to get around this issue, but i wish i didn't have to.
Especially considering the mediocre bluetooth radio performance i have been reading so much about.
And what if it is a software issue of some sort that i haven't seen?
200 bucko's more down the drain.
sad panda.
if the stereo headset it came with dont do stereo
and hardreset dont have any effect
then i'd say it's an hardware issue
if the org headset works then i'd say it's the headsets you try and or the 2.5mm -> 3.5mm converters which are the issue
I have same problem, My XDA IIs has been upgraded to WM6 CE OS 5.2.1933 by Xplode. I lost my left audio also while right audio working fine at my XDA IIs Stereo Headset.
Is it the hardware problem or software problem?
I actually gave up trying to make it work.
I eventually went with a bluetooth stereo headset from sony as a work around.
Does the job.

Bluetooth headset disconnection...

Hello,
I tried many kind of WM6 and 6.1 ROMs and faced the same problem with different frequency rate: my bluetooth headsets disconnect very often (also during phone calls) and actually I don't have any idea what should be the problem.
The HW I have is: H200 with Logitech BT mobile pro and Plantronics voyager 510 (of course not together the latters).
I tried different radio versions and different roms: the only variance is the "well-work" period. If it lose the connection I have to set off/on the BT in connection manager. Does anybody have this problem or know the root cause/soution to fix? I really appreciate any kind of help/suggessions.
Thanks
I have the same problem as you... I tried WM5 and WM6 (Official Spanish ROMs) and no solution found. My hardware is H200 and Parrot CK3000Evo. I think may be a hardware problem. Any help please???
vampirox said:
I have the same problem as you... I tried WM5 and WM6 (Official Spanish ROMs) and no solution found. My hardware is H200 and Parrot CK3000Evo. I think may be a hardware problem. Any help please???
Click to expand...
Click to collapse
Don't think there's any easy answer. Often seems to be a combination of headset firmware and BT settings in your WM device.
There are good discussions of some of the problems and issues in this thread and this thread.
Other than that, you could try different firmware versions for your headsets - that solved my problem with a Jabra 8010 (till it just crapped out completely).
Alternate solution is to cut the crappy earphones off your standard USB headphone and solder on a 3.5mm stereo plug. I haven't quite got to that stage yet, but have come perilously close many times.
e_gregious said:
Don't think there's any easy answer. Often seems to be a combination of headset firmware and BT settings in your WM device.
There are good discussions of some of the problems and issues in this thread and this thread.
Other than that, you could try different firmware versions for your headsets - that solved my problem with a Jabra 8010 (till it just crapped out completely).
Alternate solution is to cut the crappy earphones off your standard USB headphone and solder on a 3.5mm stereo plug. I haven't quite got to that stage yet, but have come perilously close many times.
Click to expand...
Click to collapse
Do you think it refer to the A2DP problem? I don't want to use my HS to listen to music; otherwise these aren't A2DP compliant neither. I just want to use for phonecalls as it designed for.
_sasa_ said:
Do you think it refer to the A2DP problem? I don't want to use my HS to listen to music; otherwise these aren't A2DP compliant neither. I just want to use for phonecalls as it designed for.
Click to expand...
Click to collapse
I want to use for phonecalls too. I'm sure there is a bluetooth problem, perhaps a hardware problem. I have same problems using BT GPS...
I have the same issue with my Cardo headset and my BTGPS unit.
On a call and the headset cuts out and call diverts to handset.
BTGPS working fine then suddenly no connection to BTGPS.
Are any of you using MS Voice Command with BT Fix? My problems seem to have started right around the time I began using it. Before that I don't recall having any headset drops. Can not say the same about GPS as I've only had it a short time and have not un installed VC to test.
BTW. I'm using the stock WM6 update and radio for AT&T 8525 H100 hardware.
Heykrop said:
Are any of you using MS Voice Command with BT Fix? My problems seem to have started right around the time I began using it. Before that I don't recall having any headset drops. Can not say the same about GPS as I've only had it a short time and have not un installed VC to test.
Click to expand...
Click to collapse
I'm not using voice command, and i probe it using clean official WM5 and WM6 ROM. Today I installed schaps WM6 ROM, but i have the same problem.
I have the same problem too. It will be ok for a few days, then wont be able to use BT (Plant 250). Then either I have reset the phone or turn off BT in phone and turn it back on, then it will work.
I believe it is a hardware issue, cuz I had a 8525 before, and never had this issue. But with the set I got now, its been a problem from day one.
I don't use voicecommand at all. The strange thing is that I use a Nokia BT GPS and it works fine always: no disconnection on long trips neither.
_sasa_ said:
no disconnection on long trips neither.
Click to expand...
Click to collapse
Do you use headset and BT GPS at same time? When headset disconnects BT GPS still working?
vampirox said:
Do you use headset and BT GPS at same time? When headset disconnects BT GPS still working?
Click to expand...
Click to collapse
Yes, the HS is dropping but the GPS still working forward. Strange, but because of that I think it's not HW problem.
_sasa_ said:
Do you think it refer to the A2DP problem? I don't want to use my HS to listen to music; otherwise these aren't A2DP compliant neither. I just want to use for phonecalls as it designed for.
Click to expand...
Click to collapse
Sorry if I mislead you with the A2DP stuff. Didn't realise you were having issues with just the basic audio.
As I mentioned in the other post, though, there seems to be compatibility issues between the MS BT stack and some headsets. Changing ROMs probably won't help, because they still all use the same BT stack. Better to try playing round with the headset - see if you can change firmware in that, if possible.
I know there are some people trying to port the Widcomm BT stack to WM6, but I haven't heard of any real success yet.

Categories

Resources