Wi-Fi proxy servers - MDA III, XDA III, PDA2k, 9090 General

I have looked through various posts on this topic from the search but not found any conclusive answers.
When I am connected via Wi-Fi I cannot set any proxy servers. Particularly I'm interested in HTTP proxying. If I browse Internet Explorer to a print environment variables CGI script I can see it's not using the proxy I have set in my 'Work' connection. What I'm a bit confused about is whether 'Work' is the correct place to put it as it has no modem connections listed there [only non-Wi-Fi options are listed such as Bluetooth and irDA].
Is this the correct place to put the proxies? If so why is my MDAIII [WM2003SE] ignoring them?

If this proxy server is in your work environment, you can set it up in 'work' in Connections.
You also have to set the phone up to use 'work' for internet addresses, as well as work-related (intrAnet) addresses. Otherwise, all external addresses will bypass your 'Work' settings.

When U say I have to set up 'work' for internet addresses what do U mean? I am connected via Wi-Fi at the moment at work and I have the proxies configured, yet I still go directly to websites in Internet Explorer without touching the HTTP proxy.
In my 'Work' network I have no modems defined. In 'My ISP' I have both GPRS and WAP setup for T-Mobile UK. My connection rules say use 'My ISP' for internet addresses, and 'Work' for private work addresses. If I change internet addresses to 'Work' as well it still ignores my proxies. I have not yet found a combination that works.
Edit:
Sorry I just realised that even though I have nothing listed in my intranet address list the MDAIII has guessed my local cgi environment script is on my intranet and has bypassed my proxy. When I use a remote cgi script out there in the wilderness it successfully reports the proxy IP instead of the MDAIII one.

Related

WiFi setup help, please

Added a Linksys WAP to my home network (itself a Linksys ADSL Router). When I search for a connection on my XDA2s I quickly connect to the WAP (The name of the SSID I set up on the WAP config appears in the Current Config window of my XDA).
Why can't I use PIE then. Sat in the cradle I can surf the net like a good'un, but WiFi just refuses to work. I can't access the WAP config page so I cannot be properly connected to the network.
I am getting somewhat frustrated - is this a WAP setup problem or a problem with my XDA?
Not sure if this is your problem but if it's complaining about 'No DNS server specified' etc when you're trying to browse you could try this:
Open Wireless Manager
Goto Tools->Network Cards
Select 'tiacxwln Compatible Wireless Ethernet'
Select the 'Name Servers' tab along the bottom
In the DNS box enter the IP address of your WAP
Soft reset (probably not ultimately necessary but it can't hurt)
Just a suggestion as it's proved useful for myself in the past.
JDH
P.S. If that doesn't work you could also try setting a static IP in the same dialogue

XDAIIi and Wifi

I just bought one of these and can't get it connected. I have a netgear wg602 access point, and have configured the IP address manually (I know IP, dns and gateway are right)
I now have it saying it's connected, with right IP address. My DNS and gateway are set up for the wireless adapter in network adapters. The signal is average. The XDA says wifi is connected. The access point even says it's authenticated and associated - same as my other stations.
Only problem is, internet explorer doesn't find any web pages - says "The page you are looking for cannot be found" (works fine through GPRS)
Also, terminal services times out trying to connect to an internal IP address (to eliminate DNS as a problem)
So, anyone know how I troubleshoot network problems - it looks like a TCP/IP issue? Can't find ping or arp etc. I've also tried an IP address that I know works on the network.
thanks for any help
Dave
Can you ping the XDA from any other station on the network ?
Is your network 802.11b or 802.11g or both ?
both
No, I can't ping the xda from anywhere else. The access point is both. I have two other stations - one on g and one on b.
thanks
Dave
Must be something in the config on the XDA.
If you look at the settings for the WiFi network card on the XDA what does it say it connects to..."Work" or "The Internet".
Try changing that and see if that helps.
If you want networking diag tools for pocketpc try these :
http://www.cam.com/vxutil.html
Includes:
DNS Audit
DNS Lookup
Finger
Get HTML
Info
IP Subnet Calculator
Password Generator
Ping
Ping Sweep
Port Scanner
Quote
Time Service
Trace Route
Wake On LAN
Whois

does NE1 have the answer to wifi not connecting to the net

im trying to get an internet connection through my wifi connection. i have done search's and lots of people seem to be asking the same question but nobody has the answer.
at the moment i can access my c: using an application called Resco explorer. but i can not connect to the internet. im not sure what setting i should have on the wifi manger and on my pc. im also using AOL as my isp.
PLS PLS help :lol:
Edit:
also i can not connect to activesync (version 3.8.0) via wifi. maybe if i was able to connect to this the internet would work as it does when its docked??????
looks like a no then
I got mine working but setting my wireless network adapter to connect to "Work".
Under Settings>Connections>Tasks>Manage existing connections>Proxy Settings> check the "This network connects to the internet" box
then
Under Settings>Connections>Advanced>Select Networks> "Programs that automatically connect to the internet should connect using:" to "My Work Network" (and the same with one for private network)
Also in your active sync settings, make sure your connection settings allow network (Ethernet) and RAS connections.
From previous research around this, i'm pretty sure you can only use the internet pass through under "WORK" settings only.
*thought i'd better register and contribute as i've gained a fair bit from this forum.
no good anyother ideas. i have searched through hundreds of threads and still no go
help pls
Make sure you have "Enable Netbios over TCP/IP" checked in your TCP/IP Advanced settings.
i have done this on both my wifi network and my isp network.
still not working
Have you checked if you're getting an IP address from your Wireless Router's DHCP server? Also DNS settings and Gateway address should be there.
You can check this easily by using vxUtil (free )
these are my settings:
tiacxwln1 - tiacxwln compatible wireless
Ip address 192.168.0.2
subnet mask 255.255.255.0
default gateway 192.168.0.1
primary DNS 192.168.0.1
secondary dns
primary wins
seconfdary wins
DHCPs server 192.168.0.1
under serial usb
IP address 192.168.55.101
subnet mask 255.255.255.0
default gateway 192.168.55.100
primary DNS 127.0.0.1
Getting this error when I tried to allow my broadband connection to share with my wifi connection. If I unplug the wifi connection and try and share with another network I don’t get any errors.
Internet connection sharing (ics) cannot be enabled due to IP address conflict on the network. ICS requires the host be configured to use 192.168.0.1 please ensure that no other client on the network is configured to use 192.168.0.1
hmmm ... ever had the same problem. all devices are able to connect to the same router except mine sx66.
then i change the router's channel to '1' .. tada .. now everyone is connected. it might sounds silly, but it worked for me.
try changing your ap wireless channel.
Re: does NE1 have the answer to wifi not connecting to the n
robboy said:
Edit:
also i can not connect to activesync (version 3.8.0) via wifi. maybe if i was able to connect to this the internet would work as it does when its docked??????
Click to expand...
Click to collapse
i found the problem with activesync 3.8 and 4.0 somehow, so i reverted back to 3.7, now wifi can sync.
afaik, connecting to internet has nothing to do with activesync. its a direct connection to wifi router. use work location and check the proxy settings if u hv any? (at home i use connect to internet without proxy, at work i use connect to internet with proxy).
Also, for Activsync with wifi, make sure that the WINS server address is that of yr PC u want to sync with.

Unable to connect Wireless Lan when phone signal is weak?

Hi,
I'm experiencing a weird problem and please let me know if it's only my problem or there is some work around for it.
My phone is SX66 upgraded to 1.40 ROM + 1.13 Radio stack
I can connect Wifi fine whenever I have some phone signal (at work). Whenever I go home where the phone signal is weak then the WIFI couldn't get connected (I believe I set up my home network correctly as I've been using it for so long and configure it for several computer/laptop in house). The network could detect the AP with the SSID but I just couldn't connect to it even I'm sitting right next to the AP.
ROM 1.40
Radio: 1.13
MDD
Are you sure it isn't connecting? What has led you to this conclusion?
Is it possible that it is connecting, but that you just can't browse the internet, in which case check your connection proxy settings. If your work uses a proxy server and you've enabled the pass-through setting in ActiveSync, your network connection may be configured with your work proxy server.
If you're sure you're just not connecting however, things to check are;
WEP/WPA Encryption - If you're using it and have other wireless devices on your network, you no doubt know what to do. If not, say so & I can help you.
DHCP - Does your router/AP support Auto-IP Addressing? Is it enabled? If not, you'll have to configure the WiFi card with a static IP within the same subnet as your router. Ask if you need help.
MAC Filtering - Are you blocking unauthorised MAC Addresses (on your router/ap)?
Interference - Wireless A/V Senders and digital cordless phones are common culprits for RFI. 802.11x APs support multiple channels (most default to channel 11), and you can change these in case of interference. Once again, if you have other WiFi gear already connected with good, strong signals, you can probably discount this one.
Sorry if this is all elementary to you - I don't know how technical you are.
Thanks for your reply.
> Are you sure it isn't connecting? What has led you to this conclusion?
Yes, I've check wireless status on the phone. "Connected to the network", and the AP with DHCP on showed the status of an IP has been allocate to the SX66 mac address. However I dont' really believe it then I check the "Adater", it said network available, and the WIFI icon just didnot show any traffic.
> Is it possible that it is connecting, but that you just can't browse the internet, in which case check your connection proxy settings. If your work uses a proxy server and you've enabled the pass-through setting in ActiveSync, your network connection may be configured with your work proxy server.
I've experience once with the internet connection via Active Sync so I disable the passthrough. Both home and work doesn't have proxy server so I selected not to have any on the phone.
> WEP/WPA Encryption - If you're using it and have other wireless devices on your network, you no doubt know what to do. If not, say so & I can help you.
At work, I have 128 WEP and the connection works fine with the key. At home, I open my network but using MAC filtering to protect it. I have problem with the open network one at home. Perhaps, I will try to setup WEP at home and see if it can work.
The only thing I'm not really clear is the difference between setting "WPA" and "WPA-PSK" from the phone.
> DHCP - Does your router/AP support Auto-IP Addressing? Is it enabled? If not, you'll have to configure the WiFi card with a static IP within the same subnet as your router. Ask if you need help.
Yes, DHCP enable as I don't want to change it back and forth when traveling.
> MAC Filtering - Are you blocking unauthorised MAC Addresses (on your router/ap)?
I do it and I already opened the network and then captured the MAC address into the AP memory. (that's why I think it's connected but will check).
> Interference -
Not really, I'm 6' away from the AP and I don't have any cordless device in my computer room.
> Sorry if this is all elementary to you - I don't know how technical you
are.
No problem, I'd like to learn more about this PDA. The concept is about the same with PC, but the tools to debug is not there. I can't use tracert/traceroute, ifconfig or ping broadcast to really know if I'm the network.
Once again, thanks a lot.
Okay, well it sounds like you're on the right track & know what you're doing.
A useful troubleshooting tool, which gives you tracert, ping, whios, ipconfig and a host of other tools is "vxUtil", which is freeware. I'd give you a URL for downloading it, but I'm on my iMate now (sipping coffee by the Yarra in a Melbourne Cafe - oh what a techno-wanker am I!), but search these forums or Google it and you'll find it.
Now, regarding the proxy thing... These PPCs are a little tricky with their internet settings, and I had to create a different 'connect using...' connection profile, if that makes sense. The important setting within the profile, which is under the Proxy tab, from memory, is "This network connects to the internet".
Now for some reason, if you don't enter in a proxy server here, that check-box doesn't stay checked when you ok your way out. So what I've had to do is go into the advanced area & enter anything in the "wap" proxy, then ok out.
Strange, but it seems to work. Although I always leave my "Private network" on "My Work Network", I can now browse the 'Net through the WiFi AP/Router.
Download vxUtil & see if you can ping your AP, then go from there.
I've worked around the problem by using static IP address instead of depending on DHCP. Thanks to Hitchhiker software. I noticed that it was trying to obtain IP address from DHCP but failed. (The very same DHCP work wells for the rest of my network). Anyway, I will use Hitchhiker to switch IP back and forth if necessary.
Thanks a lot!
MDD
Great to hear you found the problem - well done.

Guide - ALL PORTS opened through carrier proxy 3G/HSDPA

Notice - This topic is for the very advanced computer users.
I will need help from WM6 developers and SUPER advanced users for a variant of this. Please go to the COMPLETE bottom to read what I need for help.
What is it for? : Gain full access to TCP ports while using carrier's WAP/GPRS/HTTP proxy. Access IMAP/POP3/Internet Radio/Streaming TV/Skype while still using your carrier's cheap/free GPRS APN.
(currently only works on tethered, but I am working on making it work directly from the phone, I need help from those in the know-how)
Summary: The PC is tethered to the phone for GPRS/3G internet. PuTTY client connects to a SSH server THROUGH the carrier's proxy and opens up a SSH tunnel with dynamic forwarding on port 1080.
What you need :
- PC with Windows or Linux
- PuTTY http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
- A simple SSH server directly connected to the internet (could be a modified Linksys WRT54G/GS/GL router with OpenWRT, no need for a PC)
optional - ProxyCap or SocksCap (commercial, look on bittorrent). They force softwares that required DIRECT internet acess to work with this guide
Settings:
1- Your SSH server needs to listen to port 443
2- In Windows go to Control Panel / Internet Options / Connections / LAN Settings / Proxy Server /
-Check the box "Use a Proxy Server for your LAN"
-Click advanced under SOCKS: , write: localhost" with port: 1080
3- In PuTTY
-Session TAB
Hostname = IPaddressOfYourSSHServer
port = 443
-Connection / Proxy
Proxy Type = HTTP
Proxy hostname = YourCarrierProxyAddress
Port = 80 or 8080 (whatever your carrier tells you to put)
-Connection / SSH / Tunnels
At the bottom, select Dynamic & IPv4
Source port = 1080
Click ADD
You should see "4D1080" appear in the white box under "forwarded ports"
-Session
Type any name you want under Saved Sessions
Click "Save" so that anytime you reload Putty, you click ony your sessions and load to restore all the above settings.
Final Step
- Disconnect your PC from any internet access
- Connect your PC to your phone's GPRS/3G internet
- In Putty, load the session and click on OPEN (This should open up a black window with no text)
- Wait a few seconds, you should see a new window asking you if you accept a new KEY for the new host you are connecting to. Click YES
NOTE: this will only happen the first time you connect to the SSH server through GPRS. It will never appear again
- You'll be asked to enter your username and password (those are the ones from your SSH server). You'll then gain SSH terminal access to your SSH server.
- type and enter "top" in your SSH terminal
WHY? : Your carrier's PROXY closes any IDLE connections. "top" makes the SSH server send you the server status every few seconds, keeping the connection active.
- Open internet explorer and see if you can load web pages.
- Congrats, you got non-carrier-proxied non-carrier-cached internet access.
TROUBLESHOOTING
Problem: PuTTY times out when I open my session
Diagnostic: PuTTY cant connect to your SSH server, this could be due to :
- Check if you got the right SSH server IP address
- SSH Server does not listen to TCP port 443
- SSH Server is behind a firewall that blocks port 443
- Your ISP may block port 443 (mine blocks port 80)
- Your wireless carrier may not allow SSL connections, test by loading a HTTPS web page while using their HTTP proxy (find a web page such as ebay, paypal, or whatever that requires an encrypted login, see if HTTPS is in the address bar). You're screwed if its blocked
- Your wireless carrier's proxy might not be on port 80/8080, please check
- Double check your Putty settings for your session.
Problem: PuTTY says "connection not allowed" "permission denied" or something
Diagnostic - Your wireless carrier probably does not allow SSL on 443, or scans your packets to see if it is TRUELY SSL. You're screwed in that case.
Problem: When I type my username and password, I get denied
Diagnostic: you don't know your OWN SSH server's access information, moron
Problem: Im connected to my SSH server, but IE won't load pages
Diagnostic: Either you forgot to set the dynamic port forwarding (review step 3 in settings) or you didn't set the proxy settings in IE (review step 2)
Please make sure you got NO other proxies entered other than in the SOCKS section of IE
WHAT I NEED FOR HELP
As you can see, this is only for using GPRS/3G on a PC/Laptop
Im very close to getting this to work directly on the phone.
PocketPutty is a conversion of PuTTY for WM5/6
http://www.pocketputty.net/
There is no Proxy tab in PocketPutty, but go in the registry
HKEY_current_user/Software/SimonTatham/Putty/Sessions/YourSessionName
This is IDENTICAL to what you'll find on your windows PC if you create a session. Create the proper session on your PC and copy the registry entries onto your phone's registry.
I got it to connect to my SSH server the same way you do on a PC, however, I can't get Pocket IE or any other software to use localhost:1080 socks proxy.
I've tried the obvious "proxy settings" in the connections manager, but IE still tries to connect directly unless I specify a HTTP proxy. Putty cannot do HTTP proxy so I can't just open up a second dynamic port on 80.
I tried in the registry to manually enter data. I noticed that even if you got NO proxy settings, you still got two proxy entries in the registry
HTTP , which uses "new-inet" on 1118
null-corp, which uses "new-corp" on 1118
I've made some tests and come to the conclusion that IE will only listen to the HTTP proxy entry in the registry. However, it will not use it if the "type" is set to "0". Setting it to "4" (SOCKS) gives me an error that IE cannot use my GPRS connection.
Im at loss here since im not a programmer or anything. Im wondering if any programmer/developper/professionals knew anything on the matter. It's only a matter of dynamic forwarding. I know PocketPutty can do it.
I was wondering if this was possible myself... I run a linux server at home and when I am at school/work/etc. I like to use my server as a socks proxy (using the method you stated) in order to get around those pesky firewalls and content filters. I've found that in general I like to tunnel everything through my home ISP's connection. It just 'feels' more secure, albeit a lot slower due to roadrunner's poor upstream bandwidth.
Pocket IE apparently did leave out the SOCKS proxy feature, and I don't know if it's even possible to tunnel through SOCKS on a WinMo phone.
This ancient guide from 1999 says that SOCKS is not implemented on WinCE, but surely this is outdated and useless information, right?
So I ask: Does anyone out there know how to use a SOCKS proxy on a PocketPC?
I don't know how much this will help you, I'm not nearly as advanced, but I saw the word SOCKS and a bell rang. Under Settings > Connections > Connections, when you setup or edit the proxy server, the SOCKS option is at the bottom. I always manually put in the AT&T proxy settings when I need to so it sounded familiar. Hope that helps.
Hey alkizmo !
I think that your idea is not really good, because there is an easier solution, with OpenVPN. This vpn allows you to do HTTP encapsulation, like PuTTY ...
And OpenVPN server/client is faster to install.
TKz said:
Hey alkizmo !
I think that your idea is not really good, because there is an easier solution, with OpenVPN. This vpn allows you to do HTTP encapsulation, like PuTTY ...
And OpenVPN server/client is faster to install.
Click to expand...
Click to collapse
A VPN connection cannot be initiated through a proxy where all ports are blocked except 8080/80/443
VPN is not the solution to proxy bypass.
Then again, go ahead, try to prove me wrong and you'd have found a much simpler solution.
oh and this thread is outdated, I did finalize this project and have it working now.
http://forum.xda-developers.com/showthread.php?t=316890
alkizmo said:
A VPN connection cannot be initiated through a proxy where all ports are blocked except 8080/80/443
VPN is not the solution to proxy bypass.
Then again, go ahead, try to prove me wrong and you'd have found a much simpler solution.
oh and this thread is outdated, I did finalize this project and have it working now.
http://forum.xda-developers.com/showthread.php?t=316890
Click to expand...
Click to collapse
Ok, i know your solution work, but three things :
1. Mine too (sorry, I bypass proxy through vpn)
2. Mine is easier ... that's all !
3. http://ovpnppc.ziggurat29.com/ovpnppc-main.htm
Personaly, I think the problem inlies with the way Pocket PC use proxys. If there was a way to make the Phone use the same proxy for everything it would work. but from what I can tell, the phone choses the right proxy for the right thing. by looking at the proxy settings it has a for Http wap, etc.
Well, the other programs don't work with these proxies, as far as I can tell. The best wayt, IMHO, would be to make a program that routes all connections to one proxy, and maybe then the prxys would work correctly.
TKz said:
Ok, i know your solution work, but three things :
1. Mine too (sorry, I bypass proxy through vpn)
2. Mine is easier ... that's all !
3. (deleted link, no url posting privileges for new members)
Click to expand...
Click to collapse
excellent.
As of this writing, the link is still alive. And the latest release of openvpn ppc is 2.1 released December 10/2009. Or, about a month ago.
see:
the changelog

Categories

Resources