My BA device is setup to connect to my 802.11b access point and works perfectly. DNS settings and default gateway are configured, and I can open virtually any compatible site on my PDA. However, I'm experiencing a slight DNS problem.
There is no place to enter the domain name for the DNS lookups. For example, I need to access the website hosted on a computer named corpmgt in my domain ncc.local. To access this site from Pocket IE, I need to type corpmgt.ncc.local. However, I want to be able to just type corpmgt. On a Windows XP box, the TCP/IP settings can be modified to enter the DNS suffix, however this DNS suffix is not available in WM2003SE. Anyone knows where it is?
ISTR something about a registry equivalent of the hosts file; should be close enough to what you want.
Hosts file specifies the IP address(es) of certain host(s). What I want is to be able to connect to a PC named: computer.domain.ext by just typing typing computer. (That is using PIE, Remote Desktop, any network utility)...
Ooops, late reply!
Is there some tutorial/help on using hte Remote Desktop Mobile to connect to a PC? I haven't been able to connect TP 2 to my PC running Vista. I put in the Computer name, User name, password, and domain and when I clicked "Connect", it returned an error:
Cannot connect. Likely reasons are:
1. specified computer name or ip does not exist.
2. A network error occured while establishing connection.
I tried both domain name and ip. Made no difference.
I also tried both on 3G as well as WiFi but it made no difference.
You'll need to set up two things:
set the vista machine to accept the remote connections
http://howtogeek.com/howto/windows-vista/turn-on-remote-desktop-in-windows-vista/
forward port 3389 on your router if you have one
http://portforward.com/
Then you should be up and running!
'tunes
Thanks, mad-tunes. Got it working now, at least when connected by WiFi. And when the phone and the PC are on the same Wifi network, I can connect simply by putting in the computer ip address. No domain is required and no port configuring required too.
Lord_BlackAdder said:
Thanks, mad-tunes. Got it working now, at least when connected by WiFi. And when the phone and the PC are on the same Wifi network, I can connect simply by putting in the computer ip address. No domain is required and no port configuring required too.
Click to expand...
Click to collapse
Good stuff, glad it helped a bit....
If you can't connect from the outside world (ie, using GPRS), then it's most probably a port forward thing...
If you want to get this bit working: How's the machine you're trying to RDP to connected to the 'net exactly?
(ADSL modem, router etc?)
mad_tunes said:
Good stuff, glad it helped a bit....
If you can't connect from the outside world (ie, using GPRS), then it's most probably a port forward thing...
If you want to get this bit working: How's the machine you're trying to RDP to connected to the 'net exactly?
(ADSL modem, router etc?)
Click to expand...
Click to collapse
Yes, the PC is behind the router. So probably woould need to do port forward as you have suggested. Having tested it yet. Would try this out later this week.
I was wondering, is theres a way to do this if youre on a home edition of windows?
the home edition I dont believe has remote desktop.
Remote desktop mobile using 3G connection
Has anyone gotten remote desktop mobile to work using only a 3G connection? I've got it working perfectly using wifi but can't for the life of me figure out how to do it over 3G. I searched and the closest thing I could find to being helpful was the following:
I had the same problem till I created two VPN connections. One for internal use (WiFi) and one for extenal use (3G).
The internal one uses the internal IP address of the VPN server and the external one uses the external IP address.
You have to sleect which connection you want to use before starting the connection depending on whether u r using WiFi or 3G.
Hope that makes sense. It works 4 me.
Click to expand...
Click to collapse
This makes sense but it's confusing about what to change in the VPN connection settings. Can anyone explain in more detail?
Thank you very much
squirtpunk said:
I was wondering, is theres a way to do this if youre on a home edition of windows?
Click to expand...
Click to collapse
No. You can only use third party solutions like VNC. RDP host is not included in Home Edition.
You have to go into your router and set up a port forward so that 3389 goes to internal IP address of the system you want to remote into. If you have port forwarding/triggering, you can have a different port (eg, 3390) trigger to 3389 internally. If you don't have port forwarding, you can change the listening port from the default 3389 to, eg, 3390 and then you can create a port forward to remote in that way. To access, add :3390 to the end of the remote address (eg, 64.246.222.91:3390). The registry path to the listening port is:
HLKM\SYSTEM\CurrentControlSet\Control\Terminal Server\WinStations\RDP-Tcp\PortNumber
You must reboot after changing the setting.
If you have a domain, it is incredibly useful to set up DNS for this, then you can simply enter the DNS name in the client. This works internally as well.
Update: So i just went to a Starbucks and tried using the wifi there to connect to my remote desktop and it couldn't connect!? But it can connect when I'm using the same wifi router as my remote computer does this mean I don't have the router properly port forwarded? Or is it some other issue? Any advice would be great.
Thanks
When you use your wifi at home, it ends up in the same IP subnet as the remote computer, so all you need to do is to enter the computer name.
When you're at a hotspot, you need to enter the public IP address for your router and step up port forwarding. Wifi outside of your home is no different from using EVDO as far as IP addressing is concerned. You must enter via public IP.
If you don't know what your public IP address is, open a browser from any computer at home and go to this URL:
http://whatismyip.com
It will tell you what the public IP is.
Cheap Loop-Hole
I got Remote Desktop to work on 3G.
First open Opera (or what ever your default browser is) set a home page to something that takes at least 5-10 second to load (if longer, even better), like an email account or m.myspace.com. Simple sites like m.google.com won't work because they load to quickly.
Close OPERA: I mean make sure its closed not just minimized.
This next part needs to be done rather quickly, so I advise making Remote Desktop a top icon in your Start Menu.
So Launch opera, and quickly launch Remote Desktop and hit connect.
Remote Desktop will piggy back off the Opera browser connection to get out to your computer.
Note: (make sure remote desktop works at home first, either by wifi, blue tooth, or direct usb, and by checking it from a computer outside of your network) once you know it works you should be able to connect to it.
Also note: as some one stated above, make sure that proper ports have been open on the computer and router than you should be good to go.
I'm sure their is a registry fix to get the remote desktop working without doing this, but this is the only way I've been able to do it for now..
Hope this helps...
---
I'm currently using AT&T Tilt 2 Stock Rom and Radio.
Check this out guys, it might be of some help: http://forum.xda-developers.com/showthread.php?t=533664
Thanks a lot guys! It's working just fine now (on both wifi and 3G!) turns out I didn't have the router properly port forwarded.
just started trying to figure this out today. spent about 15 minutes but couldnt get it going.
just installed windows7 on my old pc and im trying to get my htc tp2 (rhodium) to work with the preinstalled Remote Desktop Mobile application. i forwarded port 3389 on both tcp and udp since i didnt know which was necessary.
is a static ip necessary to get this setup by going into the ipv4 settings? also, what is the application looking for with the input for "domain"? - subnet mask? default gateway for my home network?
so far i have tried the following inputs in my tp2 for Remote Desktop Moble:
Computer: public ip
User Name: windows7 login name
password: windows 7 login password
domain: ???
any help is appreciated. going to try this more when i get home from work.
apathyps said:
just started trying to figure this out today. spent about 15 minutes but couldnt get it going.
just installed windows7 on my old pc and im trying to get my htc tp2 (rhodium) to work with the preinstalled Remote Desktop Mobile application. i forwarded port 3389 on both tcp and udp since i didnt know which was necessary.
is a static ip necessary to get this setup by going into the ipv4 settings? also, what is the application looking for with the input for "domain"? - subnet mask? default gateway for my home network?
so far i have tried the following inputs in my tp2 for Remote Desktop Moble:
Computer: public ip
User Name: windows7 login name
password: windows 7 login password
domain: ???
any help is appreciated. going to try this more when i get home from work.
Click to expand...
Click to collapse
network-wise what you need to do depends on how your PC's connected to the 'net...
if it's connected directly via something like a USB ADSL model or Virgin media cable box, then you'll only need to let 3389 through your PCs firewall.
If it's connected via anything like a router, then you'll also have to allow 3389 through your routers firewall, as well as forwarding port 3389 to your machine inside your network.
it's the port forwarding which needs the internal IP of your PC, so a static one's a good idea (otherwise, if your PCs internal IP address changes it'll stop working). you could set your router to always hand the same IP to your PC MAC address, which can be the best of both worlds (and how I do it).
http://www.portforward.coms a good place to start to find how to forward ports for your router if you're using one..
You also have to go to control panel>system>advanced system settings>remote and set things as you need in the 'remote desktop' section.
if you don't have the 'remote desktop' section, then you're running one of the home versions of the OS which doesn't support Remote desktop conenctions (out of the box )
re domains...if its a normal home PC and nothing to do with a business, then you wont have to enter one at all.
Once you're at home, get your TP2 on your internal network (wifi), and then try to rdp to your machine using its INTERNAL ip (192.168.*.*) and see if that works.
if it does, the PC end's fine and it's your router config you need to get right. if it doesnt, then its something at the PC..
post back here if you still have trouble..
ok, so connecting with the tp2 via 192.xxx.x.x works fine from within the network at home on wifi.
however, once i try and connect with the public ip, it doesnt work. did the port forwarding thing.
i setup the static ip, i tried putting the host pc in the dmz, and still nothing. i tried disabling the host pc's firewall, and nothing.
in remote desktop mobile, im putting in the public ip of the host pc, and have tried filling in the username and password fields, and also tried leaving them blank.
any ideas?
apathyps said:
ok, so connecting with the tp2 via 192.xxx.x.x works fine from within the network at home on wifi.
however, once i try and connect with the public ip, it doesnt work. did the port forwarding thing.
i setup the static ip, i tried putting the host pc in the dmz, and still nothing. i tried disabling the host pc's firewall, and nothing.
in remote desktop mobile, im putting in the public ip of the host pc, and have tried filling in the username and password fields, and also tried leaving them blank.
any ideas?
Click to expand...
Click to collapse
if its workin from inside your network, your PCs set just fine...so it must be the firewall or port forward on your router...
double-check that 3389s alowed through its firewall
and
the forwards set to point UPD+TCP on port 3389 to the current internal IP of your PC.
tbh, I cant think of much else but let me know how you get on
ah, got it working. had to forward from ANY -> 3389, not 3389->3389. duh. works now.
thanks guys
Strange, you shouldn't have had to. RDP defaults to 3389 so the client should be using that from the word go (I know mine do!)...it could be a wierd router thing.
Depending on the exact option(s) you had to change to get it going though, it's making your machine a little more open to the outside world. but maybe not in a huge way....
(so, is it now AnyIP:AnyPort>YourIP:3389 or AnyIp:AnyPort>YourIP:AnyPort? I think forwarding all ports to 3389 would wreck eMule!)
It's probably worth changing the port used from the default though tbh.
Your change it in the PCs registry and add ortno to the end of what you enter into the client.
(so it'd be something like 192.168.0.1:3390, for example)
Then change the rules on the router to match, of course.
'tunes
Hi, dears!
Q: why I can not use my wireless networks?!
I have two type of wireless network.
I can use both of this networks in my laptop, but I am confused and tired of retrying more and again and again in pocket pc.
===========================
First network is in our faculty:
1- Proxy Server (that will be set in pc in: InternetExplorer/Tools/InternetOptions/Connection/LanSetting/)
Address:192.168.12.20 Port:8080
2- And not any more setting is required in this network!
-----------------------------------
Second, in our dormitory:
1- Proxy Server (that will be set in pc in: InternetExplorer/Tools/InternetOptions/Connection/LanSetting/)
Address:192.168.0.1 Port:8080
2- In this network anyone has an specific IP for Wireless
Mine is:
IP: 192.168.0.188
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.188
(You maybe know it better than me that this configuration must be set in wireless properties in PC)
3- This network also use user-password that when I open opera or InternetExplorer (In PC), it will ask me for them:
suppose it is: user: 1111 and password: 2222
----------------------------------
In PC, I use both of this networks successfully.
Also I can connect both of them in ppc, (PPC show me "connected"!)
BUT! I cant not use this "connected" network in IE or Opera in PPC, Why?
I am really confused and tired.
----------------------------------
Now, who know what I must do?
Help Me, Just Step By Step!
Becuase I am a simple user of WM, not proffesional!
Extra Information:
Artemis P3300.
WM 6.1 Build 20771.1.4.6
I don't know what kind of more info is needed for describong device situation!
1. Setings-Conections-Conections-Advanced-Select Networks from My ISP changed it to My Work Network, select Edit button Proxy Setings to go and check on This network conects to the Internet button and then OK.
2. In Wifi settings on the card again in Conections (the icon is Wifi) Network Adapters to select The Internet. Ok. Wifi-and restarts it.
Good luck.
Dear, SPGI!
First thank you for answering.
Altought I did many test on this ways before, but I removed all old configurations first, and then I did your advice, but not worked!
I am often (and now) in Dormitory. In dormitory wireless network when I try to load any site IE shows this error: " The page connot be found. Check the name and try again", What is the matter? (In PC in this moment IE must show user-pass window!)
I saw some problem in wireless in this pags that their text was very onfusing for me!
http://forum.xda-developers.com/showthread.php?t=567110
http://forum.xda-developers.com/showthread.php?t=568878
Can I ask, those phone are same as mine? or they have another problem. becuase (I said) I can connect wireless, (altought it is useless yet) but it seems they can not turn their wireless or semi-problems.
-----
Everyone I restart my phone, it shows a message that had not set any data connection, why?
In Setting/Connection/Connection/Manage existing connections/Proxy Setting/Advanced/HTTP/
(I set dormitory wireless network server as 192.168.0.1 and port as 8080 there.)
There are username and passoword also that I think it must be instead of user-pass login that IE in PC will show when I Open IE. But I don not know what is the domain?
Then, If user-pass must be set here, what is the domain?
And if not: where it must be set?
Also, I found this In Setting/Connection/WiFi/Network Adapter/SDIO WLAN Wireless Adapter:
IP and Subnet mask and Default gateway.
For anyone interested in data security the ability to encrypt network traffic is obviously important-- especially in light of the myriad of recent well publicized reports of private and government electronic snooping. It is also relevant to mention that to date no one has come close to cracking "TwoFish" encryption which can be used by SSH. With this in mind, consider the following tutorial which describes a method for encrypting all 3g, 4g, and Wi-Fi data, thus beefing up phone and personal data security.
Setting up a global SSH Tunnel on Android phones
This tutorial assumes the reader possesses a fully configured SSH server and rooted phone. In lieu of a server, (eg., the reader only has only a Windows-based operating system), research into CYGWIN is recommended. I use CYGWIN to run my SSH server and I have found that it is the most robust option for Windows users; however, setting this up on Windows can be a daunting task.
Setting up global SSH Tunnel on Android
1. Download 2 apps from the Google Playstore: ConnectBot and ProxyDroid
2. Install ConnectBot and ProxyDroid on your phone.
3. In ConnectBot set up Port forwards for your SSH connection. For "Type" field use "Dynamic (SOCKS)." For “Source Port” use 56001 or any local port not being used. The reasoning behind using port 56001 is this: System Ports (0-1023), User Ports (1024-49151), and the Dynamic and/or Private Ports (49152-65535)
4. Open ProxyDroid and configure as follows:
Host: 127.0.0.1
Port: 56001 (or the port you chose to use in step 3)
Proxy Type: SOCKS5
Global Proxy: Check the box
The above procedure accomplishes several things. First, ConnectBot remotely connects to your SSH server. Next, the ConnectBot connection forwards to the local port 56001. ProxyDroid then redirects all network traffic through the localhost on port 56001. Once you are connected through ConnectBot and ProxyDroid is activated all of your data will be tunneled through the encrypted ConnectBot session. This is an excellent way to set up a global proxy because it does not require manual configuration of any applications to connect through the proxy. You can test the functionality of the connection by opening up your phone browser and performing the Google search: What is my IP. If the proxy is functional you will see the WAN IP of the network of your SSH server. Additional and more thorough testing can be done with packet sniffers such as WireShark.
An application called "SSH Tunnel" is an alternative to accomplishing the above. However, I find ConnectBot and ProxyDroid is more elegant and gives better control-- not to mention being more sophisticated/chic. When correctly performed the ConnectBot and ProxyDroid method encrypts all 3g, 4g and Wi-Fi data on your phone. This is obviously useful for phone access of sensitive materials especially using unfamiliar or alien network connections. With the current proliferation of identity theft via electronic snooping on mobile devices I do not advocate using cellular phones for any banking or electronic transactions without setting up a robust and reliable encrypted connection.
I would also add that you need to run connectbot first then run ProxyDroid. If you do it in reverse Connectbot will have problems connecting.
Dr.Tautology said:
For anyone interested in data security the ability to encrypt network traffic is obviously important-- especially in light of the myriad of recent well publicized reports of private and government electronic snooping. It is also relevant to mention that to date no one has come close to cracking "TwoFish" encryption which can be used by SSH. With this in mind, consider the following tutorial which describes a method for encrypting all 3g, 4g, and Wi-Fi data, thus beefing up phone and personal data security.
Setting up a global SSH Tunnel on Android phones
This tutorial assumes the reader possesses a fully configured SSH server and rooted phone. In lieu of a server, (eg., the reader only has only a Windows-based operating system), research into CYGWIN is recommended. I use CYGWIN to run my SSH server and I have found that it is the most robust option for Windows users; however, setting this up on Windows can be a daunting task.
Setting up global SSH Tunnel on Android
1. Download 2 apps from the Google Playstore: ConnectBot and ProxyDroid
2. Install ConnectBot and ProxyDroid on your phone.
3. In ConnectBot set up Port forwards for your SSH connection. For "Type" field use "Dynamic (SOCKS)." For “Source Port” use 56001 or any local port not being used. The reasoning behind using port 56001 is this: System Ports (0-1023), User Ports (1024-49151), and the Dynamic and/or Private Ports (49152-65535)
4. Open ProxyDroid and configure as follows:
Host: 127.0.0.1
Port: 56001 (or the port you chose to use in step 3)
Proxy Type: SOCKS5
Global Proxy: Check the box
The above procedure accomplishes several things. First, ConnectBot remotely connects to your SSH server. Next, the ConnectBot connection forwards to the local port 56001. ProxyDroid then redirects all network traffic through the localhost on port 56001. Once you are connected through ConnectBot and ProxyDroid is activated all of your data will be tunneled through the encrypted ConnectBot session. This is an excellent way to set up a global proxy because it does not require manual configuration of any applications to connect through the proxy. You can test the functionality of the connection by opening up your phone browser and performing the Google search: What is my IP. If the proxy is functional you will see the WAN IP of the network of your SSH server. Additional and more thorough testing can be done with packet sniffers such as WireShark.
An application called "SSH Tunnel" is an alternative to accomplishing the above. However, I find ConnectBot and ProxyDroid is more elegant and gives better control-- not to mention being more sophisticated/chic. When correctly performed the ConnectBot and ProxyDroid method encrypts all 3g, 4g and Wi-Fi data on your phone. This is obviously useful for phone access of sensitive materials especially using unfamiliar or alien network connections. With the current proliferation of identity theft via electronic snooping on mobile devices I do not advocate using cellular phones for any banking or electronic transactions without setting up a robust and reliable encrypted connection.
Click to expand...
Click to collapse
I know that this is an old thread but is there any way to ssh-tunnel wifi traffic only ? Especially "untrusted wifi" traffic only?
Thanks
how to set up connect bot? please can you provide the information in detail?
Okay so I was using this setup of connect-bot and proxy-droid on kit kat. It was working great. I upgraded my phone to lollipop and connectbot would not port forward (the port data would be crossed out after connecting)
I decided to replace connectbot with ssh tunnel in this config
https://play.google.com/store/apps/details?id=org.sshtunnel
it did not work with global proxy in ssh-tunnel so I used proxy-droid like the OP did and it worked.
so basically substituting connect-bot with ssh-tunnel from the OP
setup:
root required
instead of connect-bot configure ssh-tunnel
host= ip address of ssh server
port= 22
user=ssh username
password=ssh passworrd
check use socks proxy box
set proxy port to 56001
do not check global proxy
now configure Proxy droid same as mentioned by OP
Open ProxyDroid and configure as follows:
Host: 127.0.0.1
Port: 56001
Proxy Type: SOCKS5
Global Proxy: Check the box
this should work great for devices absent of vpn files but have root access
launch and connect ssh-tunnel the proxy-droid. then use a browser to connect to local lan.
I have tested using a rasberry pi running ssh and in sshd_config allowed root access and maybe also tcp forwarding.
I have also tested on dd-wrt 3.0beta with tcp forwarding checked. (ssh is mostly broken/disabled in v2.4)
is there any other option instead of proxy droid ...because proxydroid is not working on Youwave..
Could an app like SSH Tunnel be used without ProxyDroid? I noticed that with ProxyDroid I was able to cloak my IP address at an IP reveal website, but couldn't do so without it. Unfortunately ProxyDroid requires root, which my current phone does not have. What good would SSH Tunnel be without ProxyDroid?
Not solve the problem, when ConnectBot connects first, and I enable SocksDroid second. ConnectBot will drop the SSH connection.
It's tool late, but the problem solved:
On SocksDroid, need select: Per-App proxy and select BypassMode, and add org.connectbot (NOT only ConnectBot) to the App List. With this settings, ConnectBot ALWAYS bypass the proxy.
Tesetd, working satble.