Help.........Help.........Help....... - Upgrading, Modifying and Unlocking

I'd like if someone could ever help me step by step installing WIDCOMM drivers on my Qtek S100 ....... I'm going mad........
I've try with your description by i fail..... The bluetooth won't work
When i try to open the Bluetooth menager there a message like this:
" THEW BLUETOOTH RADIO FAILED DUE TO INSUFFICENT DRIVER MEMORY AVAILABLE. YOU MUST PERFORM A NORMAL RESET BEFORE U CAN TURN ON THE BLUETOOTH RADIO. "
But i need to be helped step by step cause i'm not so brave!!!!!
Thanks a lot.........

Related

Solution for Navman GPS

Please get the file http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
- Copy the file EnableCharPin.exe to you PDA
- Start the bonding dialog until you get the password screen
- Now launch the explorer and start the executable (you will get a small message)
- Get back to the password screen (if you don't find it click on the BT icon in the today screen)
- Characters are now enabled
To Gary: I replied to your mail but I get the following error: The destination server for this recipient could not be found in Domain Name Service (DNS). Please let me know if this solution works for you.
Best regards,
Tobias
i need your help with the bt patch
Hi,
I have downloaded the file from
http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
and looked for the exe file, to run in my xda2.
The exe is a PC installer (didn't work in my xda - not a valid win32 app...)
I finished the installtion process, and now in my add / remove programs i have "Bluetooth Character Password Enabler".
But when i'm trying to bond with my Navman,
still only numbers can be entered. :roll:
Any idea?
(maybe someone have the EXE to run on my ppc, not the installer?)
Thanks in advance,
Tomer
This is a bit unclear, I used towa´s patch like said earlier, followed exactly the instructions and could enable the charpin, and enable my navman
just download and COPY the patch to your xda true activ sync or whatever, and the start the bonding procedure, and when the screen for the pasword comes up, you lanch the explorer on your xda look for the charenable pin, click on it, it will give the message charpin now enabled, close the explorer and type in NAVMAN in big font, and it works perfect.
let us know if you got it to work
Thanks for you quick response.
I tried to do the process as explained:
copyed the file EnableCharPin.exe into my ppc
(via active sync), turned on my navman,
start BT, look for devices, found the navman gps one, next,
and now when the password screen appears i went to "my documents", clicked on the file, and than the error message 'EnableCharPin' is not a valid Pocket PC application" appears.
Any idea?
I saw a post in the forum about registry key or hack, to enable it,
whithout further information.
Thanks,
Tomer
Problem with EnableCharPin
The work that has gone into tying to solve the issue is impressive.
Unfortunately I have the same experience with the response 'EnableCharPin' is not a valid Pocket PC application'
Does anyone have a way to accomplish inputting alpha characters via changes in the registry?
ROM 1.52.00WWE date 10/23/03
Radio 1.05.15
Protocol 1337.15
ExtROM 1.52.86
Regional settings Swedish
Rgds
I have NAVMAN GPS and have the same error. Can anyone explain how is it possible that one can run Windows installer on XDA??
I have just installed this WIDCOMM BT manager. This thing at least is not asking for any pincode so I can easily establish the connection but later on i am not getting any data on the port. I am using ArcPad application by ESRI and I am supposed to use port 8 for GPS.
Can anyone tell me why there is no data comming thru the port?
Another problem is that the connection is lost after few minutes...
it works 4 me now
I did hard reset (upgraded my os / radio to 1.66.00 , 1.10.00)
disabled multilingual support,
installed the exe (FROM MY PC, NOT FROM THE DEVICE ITSELF),
and it solved the problem.
In the pairing process I managed to write NAVMAN (capital letters!),
without any problem
I hope it helps...
Tomer
Re: it works 4 me now
Hey Tomer !
Thanks for your tip. I have had problems with the connection, but I used your tip, and now it works perfect.
tomerbn said:
I did hard reset (upgraded my os / radio to 1.66.00 , 1.10.00)
disabled multilingual support,
installed the exe (FROM MY PC, NOT FROM THE DEVICE ITSELF),
and it solved the problem.
In the pairing process I managed to write NAVMAN (capital letters!),
without any problem
I hope it helps...
Tomer
Click to expand...
Click to collapse
Navman bonding
I dont have a problem getting the XDA II to bond with it, the problem I have is I can only select Com 7 in the Bluetooth tools menu and when I go to set up the GPS in Smartst it wont let me select Com 7.
Anyone have any ideas
I have a XDA and a Navmann 4100. A couple of weeks ago my Navmann dealer sent me the patch EnableCharPin & BTHTools1012 and I started the bond between the PPC and the 4100 and all went fine but a couple of days ago I suffered and full reset on the ppc and now I can not bond the ppc and the 4100 anymore.
Can someone tell what shall I do to bond once again the ppc and the 4100?
I have tried several times with the same process as before (EnableCharPin & BTHTools1012) but I had no succes, the ppc does not allow me to write Navmann, it only lets me write numbers.
towa said:
Please get the file http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
- Copy the file EnableCharPin.exe to you PDA
- Start the bonding dialog until you get the password screen
- Now launch the explorer and start the executable (you will get a small message)
- Get back to the password screen (if you don't find it click on the BT icon in the today screen)
- Characters are now enabled
To Gary: I replied to your mail but I get the following error: The destination server for this recipient could not be found in Domain Name Service (DNS). Please let me know if this solution works for you.
Best regards,
Tobias
Click to expand...
Click to collapse
I had this same problem when I had to do a hard reset with mine couldnt get it to rebond. The only way I managed it was to re install the character enable program. It seems to be specific on which order you do it unfortunately I cant remember what it was. I had to try it a few times myself for it to work.
The way I have managed to do it in the past is to make sure the PPC device is connected to your PC via active synch when you attempt to enter the characters (NAVMAN) That seems to in some way enable the enablecharaterpin software on the PPC. Let me know how you get on.
navman
probably the wrong place to ask but could that be used with the palm os ? ie charpin .exe
rudey wrote:
probably the wrong place to ask but could that be used with the palm os ? ie charpin .exe
Click to expand...
Click to collapse
Hi Rudey
Hard to say... I believe that a guy called towa wrote this for PPC, but if you look up his user name here and e-mail or PM him he might know
Hope that helps
Regards
Chris
Navman GPS One
Is it possible to get my 'old Navman GPS One' to work with my new Nokia N73?
Best regards
Martin
Enable CharPin
hi there
i tried a few links but i am unable to download Enable CharPin.zip from any for the link please can anyone help
many thanks

by pic Install 6315 widcomm stak in my imatepocketpc??

i m new here i like to insall bluetoth tool manager to my imate pocket pc with 2.06.00wwe rom radio 1.14.oo protocl 1.337.24 extrom 2.06.100a can someonetellme how to install tools i read a topic here to rename windows file and copy other files but i cant understand can i get a detailed descriotion to install tool. first i install bluetooth tools but when i click bluetooth manager it show error reset your pda so bluetooth works but al time the same please if someonehelp me in this regard it will be appreciateble. any link to install by picture step by step
thanks
waiting for good to come

Upgrading without activesync

After a interruptus ROM upgrade my s200 d'ont start . after the HTC i have a white screen but not more.
The activesync don't connect and i can't put the ROM another time.
I obtain the multicoloured screen with usb in the left botton.
Please, could anybody help me to update the rom in this situation , mayby without activesync ??
Regards.
Edit/Delete Message
i sugest you ask here
http://forum.xda-developers.com/forumdisplay.php?f=293
as more % of the readers of that forum have the same device as
you then this forum
All is OK , Thank's
Yes thank's, i found a ROM that don't need activesync , after that changing that rom by my rom and at the moment my s200 y ok.
Thank's.
tehe same problem
hi
i have a qtek 8310 and have the same problem that u, could u tell me what kind of rom does not need activesync, please?
thanks a lot
Indeed, I have the same problem with my S200, please explain what you did to fix your phone!
For those interrested: I've found the following text in the readme file of the regular ROM updaters (RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID in this case):
8. Q: I use RUU to update and failed, and my device always boots in three-color mode and cannot enter CE OS anymore, what should I do now?
A: If the update process has failed, you will see that your device will always boot in three-color mode. It’s normal and can be recovered. Please follow the instructions below to reset your device and to establish a connection with the computer.
1. Disconnect your PDA Phone from the USB cradle/cable.
2. Reset your PDA Phone.
3. Reconnect your PDA Phone to the USB cradle/cable.
4. Check that the communication cradle/cable is connected properly.
5. Return to the ROM Update Utility.
Note: You should ignore the ActiveSync connection.

iPaq hx2410 : the bluotooth radio failled to turn ondue to insufficient driver memory

Hi all,
I have update my 'old' but still powerful iPaq to Windows Mobile 6.5 following the suggestion of Spiaatie... (http://forum.xda-developers.com/showthread.php?t=519296) GREAT JOB!!!!!!
everything worked fine, easy job the update process and everything seemed to work fine...
I tested WiFi and BT...
Now I have installed a GPS Navigation SW (TomTom 7) in the SD card...
Running the SW no problem... turning on the BT: great Problem - I got the following problem: the bluotooth radio failled to turn ondue to insufficient driver memory. you must perform a normal reset before you can turn ON the Bluetooth radio.
I've tried a soft reset: nothing changed
I've tried a full formatting (hard reset): BT was working and as soon as I have reinstalled the TomTom, same message....
any suggestion???
thanks all
Vit
Solve it!!!
Hi all,
googling the issue I fix it!!!!
I've just renamed 2 files in the windows directory:
BtCoreIf.dll
BtSdkCE30.dll
and the BT works fine!!!!
cheers
Vit

[Q] BTTrayCE/bluetooth error

my problem is, every time i started or soft reset my hd mini, i will get an error message..like this one " 'BTTrayCE' is not a valid Pocket PC application " ..i think its about the bluetooth thing inside the phoone because since i get this message i can't use my bluetooth to transfer/receive files.anyone knows how to solve this?
I've had the problem as well. Probably casused by tomtom installation. Google on tomtom and the error and you may find a solution.
I did (in the end) reinstall a ROM...
yes true.i once installed tom tom,,but i didn't know its because of them..now the problem solved after i uninstall tomtom and hard reset my phone.

Categories

Resources