Related
I have difficlut time to install tomtom 5 on wm5. I got windows error at the setup loader starting to install the program to PPC.
(Which is at "select language -> select install application -> show a list that things will to install -> and click next " after click that "next" icon, i got that error windows, the error message is "Tomtom setup application has encontered a problem and needs to close.")
if i can not install the 5.0 on wm5 , how can i upgrade to 5.10? i have been tried many ways to install it. some one post here said to copy 4 cab files to SD card. install one by one. but i can not find where i can start the tomtom 5 after i finish installation via one by one.
can anyone make full installation guide for how to install tomtom 5 on wm5, how to install the 5.10 upgarde package? how to setup tomtom 5 + BLUEtooth GPS reciver + Wm5 to work?
i think alot of people here still have installation and configuration problem about tomtom 5 via wm5.
hope to see the guide soon, Thanks
Done. http://forum.xda-developers.com/viewtopic.php?p=154294#154294
Well, this is pretty newbie advice to most of you, so you may think it doesn't warrant a write up, but I had to do some searching for info on how to upgrade my ROM so I thought it would be good to put it all in one thread.
1) Download the ROM you want from the FTP server....Details here http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
2) Download MaUpgradeUt_noID.exe to your Desktop from here http://forum.xda-developers.com/download.php?id=7644
3) Disconnect your device from the USB cable.
4) Hold the Power button + Light bulb button, and press the reset pin found at the back of the device (fiddly if you have large fingers).
You will notice that the screen of the device is dark but has “USB” and "v 1.0" written on it.
5) Connect back your device via the USB cable.
6) Run the download ROM upgrade application...When it prompts you to begin the upgrade process, just minimise the window or leave it alone (DON'T CLOSE THE PROGRAM).
7) Whilst it is running, use Windows to search for a file named RUU.dll
8 ) Right click file and choose ‘Open Containing Folder’
9) Select all files and copy them
10) Create a temporary storage location....C:\Upgrade....And Paste all copied files in here.
11) Copy the file MaUpgradeUt_noID.exe from the desktop into C:\Upgrade
12) Close the previously started upgrade application running in the background
13) Run MaUpgradeUt_noID.exe from it's C:\Upgrade location
The upgrade process should begin now…If it does not, run the MaUpgradeUt_noID.exe application again
Make sure you DO NOT DISCONNECT the cable.
The upgrade takes around 20 minutes to complete.
14: Disconnect the USB cable when told, then push the reset pin. Ignore the advice to do a hard reset by holding down the soft keys while you do this, just push the reset pin by itself. Your Universal will load the new ROM image and you're all done.
Thanks.
Thanks!
There is only one thing, step 4, it is not USB but Serial.
Mento said:
Thanks!
There is only one thing, step 4, it is not USB but Serial.
Click to expand...
Click to collapse
It will go to USB when upgrading.
It doesn't seem to work with last Qtek 9000 ROM...
Help!
OK, I made my own instructions. Follow this instruction of mine:
The file is extracted in your computer. Once you run the shipped.exe file, you need to go to:
My Computer
Your Drive (mine is Drive C)
Show the contents of this drive
Documents and Settings
Choose your folder name
Choose "TOOLS" from the menu bar
Choose "FOLDER OPTIONS"
Click on the "VIEW" tab
Click on "HIDDEN FILES AND FOLDERS"
YOU WANT TO SHOW ALL HIDDEN FILES AND FOLDERS
Now go to TEMP folder
Now you will notice a bunch of folders will show up, tons of them to be exact. What you need to do now is click on the shipped.exe file again and "LOOK" for the folder being created because that folder is what you want to copy. If you did not see it created, you have to manually open each folder and look for the files I listed below.
Assuming you found the folder, you will have these following files inside that folder:
ms_.nbf----------------------this file is responsible for EXT ROM Version
nk.nbf------------------------this file is responsible for Windows Mobile Version
radio.nbf---------------------this file is responsible for Radio Version
EnterBL
GetDeviceData
readme
ROMUpgradeUt
RUU.conf
RUU.dll
UI.dll
MaUpgradeUt_noID
If the file MaUpgradeUt_noID is not there. You need to get hold of a copy of this file as you need this.
There you have it, REMEMBER, you need to have the MaUpgradeUt_noID file plus all the rest of the file if you want to upgrade to the ENTIRE I-Mate ROM, QTEK, O2, or whatever ROM you want.
If you only want to upgrade to the radio version then you need to delete 2 files namely: "ms_.nbf" and "nk.nbf". Leave "radio.nbf" alone and click on the "MaUpgradeUt_noID" file to initiate the Radio installation. Basically those 3 files control what you want to update on your device.
Hope my instructions were clear enough for you. Hope this helps.
cannot locate files after running exe
Hi All, I have ran the ROM update exe and the message saying extracting file XXX etc appears OK then the program closes. When I search for the files, for instance *.nbf they dont exist anywhere on the computer - does the exe autodelete the temp directory and have I missed a stage ? Any help gratefully accepted
Re: cannot locate files after running exe
SteveInUK said:
Hi All, I have ran the ROM update exe and the message saying extracting file XXX etc appears OK then the program closes. When I search for the files, for instance *.nbf they dont exist anywhere on the computer - does the exe autodelete the temp directory and have I missed a stage ? Any help gratefully accepted
Click to expand...
Click to collapse
Did you follow the instructions above on how to show hidden files and folders? After double clicking the .exe file and running it, leave it open then look for the NEWLY created folder in the TEMP folder as instructed. You need to look for it the hard way by opening each folder one by one and check for the files to see if you got the right one.
someone advised me for some extra step, someone please advise is it coorect steps:
"Then you need to make a small change to one of the text files. Look in the directory for
RUU.conf
Open it in notepad and add this line
[CHECKCEID_TYPE]=1
then save it
That’s about it….."
thx for reply christian,
yes i tried searching every folder the manual way but still no joy, I have just copied the rom exe onto my other computer and it worked OK on there and updated my exec without any further problems
Hi All, Linked to the update of the exec software , i noticed the audio playback on tom tom navigator and media files is very jerky to the point you can hardly make out what is being said. has anyone else had the same problem and have you found a solution to fix the problem ?
many thanks
Steve
Bricked QTek 9000
I got a Qtek on ebay and it was working when I tried to upgrade it failed with a "115" Radio Error.
Tried the method on this thread and it completes the upgrade but when I reset, I does not change from "USB v1.0" can anyone help!!!!
Hi
I'd like to take the risk for updating my Dopod 900 for new versions of ROM & radio, but I've got couple of questions.
1. I've got Dopod 900. I do understand, that it's absolutely the same with Qtek9000, but to be sure: may I use ROM update for Qtek?
2. My ROM (1.13.69) & radio (1.04.02) as of 10/12/05 are ancient What version of ROM & radio consider to be stable as of now? I saw in signatures that people using ROM 1.30.77 and radio 1.09.00. Are they OK?
3. I got on FTP and was a bit confused: as far as I understood the latest ROM is 1.30.100 (UNI_QTEK_130100_190_10900_ESN_Ship.exe), but it's for ESN (Spanish???) localization. So in order to get WWE I should use UNI_ORUK_13090_174_10300_WWE_Ship.exe and that update radio separately from 1.03.00 up to 1.09.00 or just UNI_QTEK_13077_176_10900_WWE_Ship.exe? What would u advice me?
4. What is the benefit for updating from 1.13.69 and 1.04.02? Will it works faster & more stable?
Thx in advance & take care
Hi
I tried this and get a 120 (incorrect country ID) error.
Strange, my V1640 from Vodafone is spanish and i want to upgrade to UNI_QTEK_130100_190_10900_ESN_Ship.exe
so it should be ok.
Am i wrong? Is there a way to get rid of that message?
Hi I have a Xda Exec
ROM: 1.13.82 WWE
Rom date 11/30/05
Radio 1.04.02
Protocol 42.37.P8
Ext Rom 1.13.188WWE
And when i do this:
4) Hold the Power button + Light bulb button, and press the reset pin found at the back of the device (fiddly if you have large fingers).
The devide says me:
Boot options:
Enable KITL
Clean registry hive
Format storage
I soupouse that it isn´t the boot loader for go on with the proces... what happens?
I want to upgrade to UNI_QTEK_13077_176_10900_WWE_Ship.exe for use my heasphones motorola stereo... (AD2P..)
Can any body help me?
Thanks a lot
Please!!!
Edit post number 1 and add as the last step:
14: Disconnect the USB cable when told, then push the reset pin. Ignore the advice to do a hard reset by holding down the soft keys while you do this, just push the reset pin by itself. Your Universal will load the new ROM image and you're all done.
It seems that a lot of people are having trouble after a ROM upgrade by following the instructions on the upgrade program which tell them to hard reset.
Many thanks! PU10 by German T-Mobile upgraded to WWE
I have a T mobile mda pro, any recommendations as to what the best rom is.
Im torn between the new orange rom which is supposed to be good and the jasjar one?
Anyone?
Latest jasjar ROM
Hi,
Can I follow these instructions with my UK jasjar?
Where can I find the latest Rom?
Cheers
Anyone can point me out to the adequate ROM?
thanks
astpaul said:
Hi
I tried this and get a 120 (incorrect country ID) error.
Strange, my V1640 from Vodafone is spanish and i want to upgrade to UNI_QTEK_130100_190_10900_ESN_Ship.exe
so it should be ok.
Am i wrong? Is there a way to get rid of that message?
Click to expand...
Click to collapse
I have a completely dead O2 Xda Zinc..probably caused by software...can someone tell me how to get to bootloader mode so I can try to update rom?..thanks
you need to have the abi files update for your O2 zinc that need only to load to your mini SD. and after power on it will automatic detect by your zinc
windelas said:
you need to have the abi files update for your O2 zinc that need only to load to your mini SD. and after power on it will automatic detect by your zinc
Click to expand...
Click to collapse
i have a similar problem with a dead O2 XDA Zinc...where do i get the abi file or can i make one from the wm6 upgrade file (Xda_Zinc_RM3070712_WWE_ExtV2.8.0.exe) that i download from the official website
the abi file can be found inside the exe but i dunno how can u extract it since if u use any extractor it will not give u the abi file ... also if u hv the raw rom & want to extract the rom also u will hv difficulty in extracting it
that is the problem that i am facing now
you can extract abi file from Xda_Zinc_RM3070712_WWE_ExtV2.8.0.exe by
1. connect o2 zinc with usb
2. flash your o2 zinc by exe file
3. when complete flash don't push finish button
4. select to view hidden files in folder that you put exe file
5. finally you will see marsii_g4.abi
goodluck & sorry my bad english
the .abi file in rapidshare
http://rapidshare.com/files/91371327/MarsII_G4.rar.html
unable to open registry key
hi kindly help me with my xd zinc problem w/ rom6. My unit suddenly crashed while in standby mode then i reset it then the setup was changed. the programs i installed suddenly became resident applications. Meaning ithey don't appear anymore in the storage memory unlike before that i can easily uninstall them. Now i dont know how to install them to install new softwares because the memory is low. then a message error "unable to open the registry key" appears everytime i reset.
What happened and what should i do?
ronald_di said:
hi kindly help me with my xd zinc problem w/ rom6. My unit suddenly crashed while in standby mode then i reset it then the setup was changed. the programs i installed suddenly became resident applications. Meaning ithey don't appear anymore in the storage memory unlike before that i can easily uninstall them. Now i dont know how to install them to install new softwares because the memory is low. then a message error "unable to open the registry key" appears everytime i reset.
What happened and what should i do?
Click to expand...
Click to collapse
reset meaning soft or hard reset?
hard reset or soft reset both does not do any good to remove the error message "unble to open the registry key" and to just reload the orginal applications and remove the others
ehmmm ... sad to say maybe u hv to flash the rom
how do i flash the rom?
download the official rom from seeo2 and then make sure ur dev is fully charged ... sync it wz ur pc using active sync then execute the rom (.exe file u hv downloaded)
good luck
Hi guys,
I've already upgraded to WM6 for my Zinc, but I'd like to have an original ROM in case I need to flash back when something's wrong. I checked seeo2 but I can't find it.
Pls tell me where I can find this original ROM (WWE) ???
Thanks
LeoDH said:
Hi guys,
I've already upgraded to WM6 for my Zinc, but I'd like to have an original ROM in case I need to flash back when something's wrong. I checked seeo2 but I can't find it.
Pls tell me where I can find this original ROM (WWE) ???
Thanks
Click to expand...
Click to collapse
original rom? WM5 ... u can get it at the site also
cruzzmz said:
original rom? WM5 ... u can get it at the site also
Click to expand...
Click to collapse
You mean the WM5 ROM on seeo2? It's still an upgrade ROM, not the original that comes along with the device at the beginning.
Anyway, I'm a newbie so please advice how to 'downgrade' from WM6 to WM5? Is this similar to the process upgrading from WM5 to WM6 (you just sync the device with PC, run the .exe file on the PC and let it go)?
If it's not, please kindly give me detail instruction
Many thanks
Apologies if this has been covered elsewhere, but a forum search revealed nothing...
How do I install .NET 3.5 on my Touch HD?
I have installed Advanced Congif , and it tells me i need to install .NET in order for it to work.
I downloaded the .net redistributable file from the MS website (filename is NETCFSetupv35.msi), but when I try to run it on my HD as I would with a .cab file, it tells me there's no associated program to run it.
I guess it has to be installed some other way (through ActiveSync maybe?), but I don't know.
Any helpful soul out there care to put me out of my misery?
Cheers in advance
Pete
Yes it has to be done through Activesync.
run it on your pc, and it will install on your device (or next time you connect if you're not connected when you run it)
It says on the microsoft download page...:
This package uses ActiveSync 4.0 to update the device. Before running NETCFSetupv35.msi, connect your device to your PC. If your device is not connected, ActiveSync will store the CAB file and will not install the package until you connect. If you are not using ActiveSync, run the CAB files on the device that correspond to the device–specific CAB files found in the install folder.
and
Instructions
Click the Download button on this page to start the download, or choose a different language from the drop-down list and click Change.
Do one of the following:
To start the installation immediately, click Open or Run this program from its current location.
To copy the download to your computer for installation at a later time, click Save or Save this program to disk.
...
Use a CAB
myearwood173 said:
Yes it has to be done through Activesync.
Click to expand...
Click to collapse
I did not use ActiveSync to install it. I can't remember where I found it, but it has some kind of "Microsofts digital signature", so I think it's the right one...
Link:
http://www.fileden.com/files/2008/7/1/1983933/Microsoft_.NET_CF_3.5.CAB
Thanks!
Thanks guys,
sorted, using the .cab (couldn't work out how to do it with Activesync).
Can't install :-(
Nooo! I have a problem...
I had some trouble with .NET CF 3.5, and then I wanted to reinstall it, but when I uninstalled it, and then tried to install it again, it didn't work.
It doesn't work through ActiveSync AND the cab. Do anyone know whats wrong here, or do I need to start a new thread?
Is your ActiveSyns up to date? And did you download the file from the mircosoftsite? I reïnstalled the file yesterday..
hanjoster said:
Is your ActiveSyns up to date? And did you download the file from the mircosoftsite? I reïnstalled the file yesterday..
Click to expand...
Click to collapse
My ActiveSync is okay, and the cab is from the microsoft site...
EDIT:I think something is wrong with my phone, but I don't want to do a Hard reset.
Installed no problem if you use your PC to get the CAB just pop in onto the memory card, bung it in your phone and using file explorer locate file and install onto your device. Easeeee
Even easier would be to use PIE and visit this site/thread and follow the link to download directly onto phone then do above in File Explorer
http://www.fileden.com/files/2008/7/...NET_CF_3.5.CAB
Thanks clb92
clb92 said:
I did not use ActiveSync to install it. I can't remember where I found it, but it has some kind of "Microsofts digital signature", so I think it's the right one...
Click to expand...
Click to collapse
Thank you! Worked like a charm!
.NET 3.5 cab
bro,
.NET 3.5 is available as cab for direct installation on to your phone. Copy in to your phone / storage card and install in phone memory. I have installed on my HD stock rom and works fine. Here it is .... hope this will help, this is my first response to a mail and hope what i do is right. thanks Dr Shaheed
Is any way to install WM6 without connection cable , i don't have cable to connect with usb so is any way to install with any .CAB file .
My pocket pc is Samsung i830 .
thanks in advice
some devices support flashing from sdcard not sure about yours
but cab file will not work
the cab file installer is a part of the os you are trying to replace== no go
Rudegar said:
some devices support flashing from sdcard not sure about yours
but cab file will not work
the cab file installer is a part of the os you are trying to replace== no go
Click to expand...
Click to collapse
But is any way to try in my phone , where can i get those files to flash from wm5 to wm6