Java for PIE - MDA III, XDA III, PDA2k, 9090 General

I need to have java virtual machine to view some real time traffic web pages. Unfortunately, WM2000SE nor PIE have jave built in. I tried to use "ewe" available here: http://www.ewesoft.com/ but the web page with PIE nor using the ewe html browser showed the page correctly. Some advice on java is here http://www.comp.lancs.ac.uk/computing/users/fittond/ppcjava.html but I still don't have that page loading properly. Just FYI the page is http://www.dot.ca.gov/dist12/D12_tmc/webmap/d12map.html#

what you ned is a JVM plug in for PIE. Not all the solutions listed on those links do that. I have only had ONE good experience with JVM+PIE and that was YEARS AGO with a iPAQ 3800 with the Jeode built in solution(just to give you an idea JUST how long this has been a standing issue with pocket pc's. It seems to be a microsoft issue, since they have also pulled Java from the windows XP OS not to long ago. Its a competitor to their .net platform so they are sqeezing it out where ever they can and have never had the intent to incluse it in pocket pcs). I worked with NSI in the early days before they had a real plug in implimentation and when they did it really didnt work at all. Things have hopefully changed since then, but for the most part I dont think a proper solution that works exists. If I was to suggest anything I would suggest Jeode (which when it worked back then it works like it does on the desktop pc IE, have no idea if it works now any longer as well. I some how remember getting a version of it trying it on my newer iPAQ at the time and suddenly having it not work with sites it once worked with. So who knows) or NSI (which seemed to be putting a lot of work into their version (if they finally came up with a real PIE plug in that worked, I know they put a lot of effort into their build way back then But PPC's and OS's have changed a lot over the last couple years so who knows now).
In short I gave up on trying to find something that worked because I was looking at spending a lot of money on software that MAY/MAY-NOT get it right. Just said @#$%! it! Not worth the headache or wasted trial and erro money. Sorry for the down news but save some time of your life that you might waste on this journey :x
Cheers.

Related

For those who returned TomTom 7

Hi,
i read a lot of posts about getting TomTom 7 to work and how it is not working on the TP2. HTC offers a 15 day trial of Copilot which supposedly works on the TP2. You can check it out at http://www.htc.com/uk/SupportViewNews.aspx?dl_id=595&news_id=185. I think it could be a nice and working alternative for a full blown navigation system on the TP2. Still better than trying all kinds of dubious fixes and hacks to get TT7 to work. Maybe it's something for you
Jan
What ever - say good bye to TT because of the procedure which you have to do when you change the device
I installed Garmin Mobile XT the other night, works well.
I really like how you can search on a street name and not have to put in the city first like tomtom makes you (so many times i couldnt find where i wanted to goto cause tomtom had it in some weird city)
Anyway, works really well...
Just going to have a look at tweaking it for better response later, as it seemed to pause a second before updating at intersections.
After buying TomTom Navigator 7 retail (on SD card) and finding it wan't install at all on my TP2, tried and finally registered Copilot 7: very happy with it, works fine on TP2 with no GPS delay
I downloaded the trial, and will give it a shot at the weekend.
It`s very wird for me what u all saing. For me Tom Tom ver. 7.19 working with no problem at all. I just bought my tp2, even did`t do hard reset, i did`t do anything, and tom tom works strait after instal it.
We are talking about the retail version of TT7 preinstalled on 4 GB microSD card: it refuses to install on any device that isn't on the official list, like Diamond and Raphael (tried unsuccessfully on TP2 and Xperia X1).
I am using TT6 Navigator (same version that was on my P3300) due to the lack of maps for North America.
I needed to install WVGAFIX3 before I was able to view TT6 correctly though.
I found that Copliot works fine, but can be quite innacurate at times. If I'm driving on a road that's next to a motorway, it can sometimes jump me onto the motorway which I never found with TomTom. The lag is not _too_ bad, but it's still not great, just better tham TT7.
I've just installed a trial for Navigon, and I have to say, it's more polished than CoPilot, and smoother than TT7, although there is still some lag which is REALLY beginning to frustrate me
I found Copilot to be quite inaccurate as well in my recent tests. I am downloading Navigon now and giving it a shot.
Hmm navigon 7 is constantly freezing the device. Which version did you install?
Managed to get it to work with the files provided for the Xperia http://forum.xda-developers.com/showthread.php?t=443453. It looks pretty crappy as the graphics have not been adapted to WVGA, but In the end the navigation counts
Its a hellofalot faster than copilot anyways.
Too bad, there is not uninstall capability (copilot live downloaded from HTC support) when you done with the trial. So end up you have to delete the folder manually and not good cause it will stay at your registry.
Luckily I have a full backup before install this.
I use to be a TomTom user and always had problems finding the GPS unit if the GPS hadn’t been previously activated. I use to load either Goggle maps or Live Search, let the program active the GPS unit and then load TomTom, this worked 100% of the time.
I'm now a VERY happy Garmin XT user. No problem with finding the internal GPS unit, fast loading and very quick contact address search.
I did a two day test run with Copilot and Navigon and I found Navigon to be the much better solution. Copilots behaviour was erratic at best, it jumped between cities and even when it worked it was slow as hell and inaccurate. Navigon worked just fine and was fast and accurate as well so I'll stick to that one.
Ah and I had to manually kill Copilot as well as no uninstaller was there.
copilot 6 on touch pro 2
didnt want to start a new thread so i have resurrected this one. does anyone know if copilot 6 will work on the touch pro 2 (WM6.1). looked everywhere online but no answer. it seems i am the only broke dude trying to run such an old program on a shiny new device. (excuse is i,m waiting for copilot 8)
If copilot 6 did work it wouldn't look pretty - I ran my existing CP7 on the TP2 and the higher screen resolution distorted everything - personally having the wrong aspect ratio on things drives me up the wall so I found it pretty distracting.
Kudos to ALK support though, I emailed them asking about an upgrade of CP7 to CP7-HD (which does support the TP2) and they sorted it out for me without charge.
Thanks matey. Wont bother installing then. I didnt want to go through the stress of installing it and finding out it didnt work or look good. I actually bought copilot 7 HD but returned it cos it didnt say HD on the pack. I was also going to download it from ALK,s website but I thought, what the heck its almost 2 years old, Copilot 8 will be released soon so I,ll wait for that.
Cheers
CP7 loaded just fine on my TP2, and works (even in landscape mode), but it's method of telling you the routing is questionable (missed several turns and junctions, really disconcerting, the map's right, just the audio feedback seems stuffed to hell and back), and the less said about it's handling of things like POI and safety camera files from other sources is best left unsaid, or I'll go into foul language mode (seven %*£&%$ notifications after the other for each £%&$%* camera?!)...
I have to find a card adaptor for the next trial, which'll be Navigon...
I have to find a card adaptor for the next trial, which'll be Navigon...
Click to expand...
Click to collapse
You don't need a card adaptor per se, I installed it on a usb memory stick and copied it later to the sd card on my TP2.

removing "bloat" in wm 6.5 and carrier software, mostly the latter

hi,
just got first winmo phone, have been avid computer user for years, but never had felt like getting a pda or smartphone, until now.
I want to find a whole new home-cooked ROM to flash, which is, obviously, good. have the htc imagio, and in searching have not found hardly anything, so may put that on back burner for now.
Meanwhile there is lots of stuff I don't want on the phone, namely all the carrier's software, it pops up at annoying times with an advertisement, and i'm not going to use it anyway, and it's taking up space, and possibly resources. I just saw, before I registered, a post including some info, but can't find it now. I've done a bunch of searches and come up with similar tasks, but on different phones and different os's. i've also come across the infamous "this is posted everywhere" post, but nevertheless I am not able to find anything specific to my phone. i want to remove stuff like touch flo, mobile email, visual voice mail, vznavigator, city id, and so on.
thanks for anyhelp,
rlr
runLoganrun said:
hi,
just got first winmo phone, have been avid computer user for years, but never had felt like getting a pda or smartphone, until now.
I want to find a whole new home-cooked ROM to flash, which is, obviously, good. have the htc imagio, and in searching have not found hardly anything, so may put that on back burner for now.
Meanwhile there is lots of stuff I don't want on the phone, namely all the carrier's software, it pops up at annoying times with an advertisement, and i'm not going to use it anyway, and it's taking up space, and possibly resources. I just saw, before I registered, a post including some info, but can't find it now. I've done a bunch of searches and come up with similar tasks, but on different phones and different os's. i've also come across the infamous "this is posted everywhere" post, but nevertheless I am not able to find anything specific to my phone. i want to remove stuff like touch flo, mobile email, visual voice mail, vznavigator, city id, and so on.
thanks for anyhelp,
rlr
Click to expand...
Click to collapse
u will have to find a cook rom to out all of this programs that u dont want

Changed Sim - White Screen

So I have been using my imate PDA2k without a hitch, purchased it unlocked, and was using a local carrier somewhere in Europe (Voda). Went to T Mobile in the same country and put the sim in - BOOM - white screen on startup and it seems to have reset because I heard the pings to indiate screen alignment.
Took it home, used My Mobiler to looksee what is happening. Its all working fine, the screen and everything, its just white! And after several Power/Reset button resets everything is still there but on the device - white screen only. Power on battery and backup indicated 100% but backup battery for a while said "needs replacing" - then on settings now its 100%
The touchscreen works! I reinstalled the password and when I touch the white screen in the places of the four numbers, its ok!
But its all white! What can I do?
hi and welcome to the forum.
there are basicly two options to what could have happened, either something got messed up with the rom and after the sim changed it was triggered and went completely wrong or while changing the sim, you accidently caused a hardware defect.
another way to try that is: put the device into bootloader mode!
the way to do that is press power+record+reset. maybe hold the power+record a little longer after resetting.
if your device screen shows SERIAL V2.0x (where x is a number from 5 to 7), apparently your hardware is ok and just your rom broke. in that case, after you claimed you already hard resetted, you might want to flash that rom again. if i read your post correctly, you are still running wm2003se. if your carrier does not host your rom anymore, you can always refer to xplode's shipped rom archive here: http://firmware.atspace.com/Blueangel.html
if your device still shows only white, either when trying to access bootloader mode, or after re-flashing, yo might have harmed your hardware. you might want to check for a replacement screen. if you want to have a look inside your device, whether the display cable maybe broke, here is a link to the service manual: http://rapidshare.com/files/336406555/HTC_Blue_Angel_Service_Manual.pdf
i don't think it can have anything to do with the backup battery, but if that really was the reason, here you find a thread with someone, selling them: http://forum.xda-developers.com/showthread.php?t=551886
or you could upgrade your rom to wm5 or above, then the backup battery is not needed at all.
Thanks for the great response!
So I waited about an hour of using it with My Mobiler but with a white screen only on the device, and then waited a bit, and and just pressed power and reset again to see if yet another reset would work - and it did.
It was so strange that the previous times I tried to reset it didnt seem to work at all. But I knew that the screen was ok because I used My Mobiler and could press the password for the device on the white screen ok, guessing where the numbers were, and it activated fine.
So strange, but its all ok now. Thanks guys - this device is 5 years old!
mymobiler is a remote connection to the device, so that does not necessarily shows, that the screen is working, because it uses the usb port to determin, what the display would show, just like a remote desktop connection to a pc can work, even when your vga or dvi cable is broken, because picture information is sent through lan or wlan then, with a virtual graphics driver. also for some people, the touch feature worked fine before without the screen showing anything, because that is also another layer, that is transmitted through the digitizer. it could really have indicated that your display flex cable was broken, which is why i went both ways in my answer.
i am glad to hear it works again, just posted to clarify a few things
also, if you ever get tired of wm2003, make sure to have a look at d-two's wm6.5.3 rom in my signature and in this thread here: http://forum.xda-developers.com/showthread.php?t=569869
back in the day, when i still used wm2003, i felt quite excluded in mobile developments of the last few years, because many 3rd party applications would just work on wm5 or above and with that rom you can be up to date and use a lot of new features, which make the phone feel less like an old pda and more like a new phone. but now, that your device works again, of course that is completely optional.
Great Tony!
Although I am a little afraid to flash the rom to WM5 or 6 I should give it a go.
Im happy with the BA the way it is with some GUI software!
Thanks again!
i also had different gui improvements installed on wm2003, but still it didn't feel to fingerfriendly, which is important for me, because, let's face it, the BA is a modern phone, not some geeky 90s PDA , so fumbling around with a stylus is just not cool. also, whenever i looked on engadget i was incredibly envious of all the cool apps and GUIs. whenever i looked at ppc freeware pages i saw that most games, media players, browsers... would just work with wm5 or above, and after i found out, that it is incredibly easy to make your BA become a modern device (i would even go as far as calling wm6.5.3 a 2010 phone), i decided i want that, to kick every iphone's butt, to install any app i want, not to be forced to install 20 programs after a hard reset anymore, because everything already works fine and looks nice. i mean, these days, you hard reset, the extrom installs windows marketplace for you, you log in with your live account, it downloads everything you had installed/bought from there, including microsoft myphone and when you start myphone, you are already logged in, so it syncs all your pim data with the internet, and you have everything back. back in the day i was afraid i would lose everything i set up for ages if i ever had to hard reset, these days it just takes an internet connection and 20minutes of your time, to have your phone completely back up after flashing a new rom. it is amazing. before upgrading (the procedure for windows xp is to be found in the 2nd post of the link above) you should still make a backup of all your data, either through pimbackup (freeware by dotfred) at http://www.dotfred.net/ or with spb backup, available at spbsoftwarehouse as a trial version, in case you want to go back. about those backup apps, pimbackup is great because you can schedule backups of all your important information, also stuff that is not synced, like sms or the call history and restore it to any other rom or even other device, but it does not back up your installed programs (most of which you won't need anymore anyway.). spb backup on the other hand makes a backup of the entire system, and can restore the exact state of the device after a hard reset, including all installed programs and those programs settings, on the downside, those backups are worthless on another rom, just work for hard resets.
that was just a fair warning, because not everybody is happy with wm6.5's battery life and performance, especially when coming directly from wm2003. i started with wm6.0 and so i am used to those disadvantages, and since the roms get better with every new release, it is actually an improvement for me every time.
also i need to tell you, that by tomorrow, there will be a new rom released build 23518 by egzthunder1. yes, although the number is not higher, that rom is newer. but since none of us know, if that rom has any bugs, it might not be right to start with that one right away, you should probably try the one from my signature / from here: http://forum.xda-developers.com/showthread.php?t=569869 (same thing) because there, the bugs are known and listed. when you have found your way around the new OS, you can still switch roms in about an hour, as stated above, you travel light with the new roms, and as long as your pim data is backed up and you follow the instructions, everything will be fine.
with best regards,
Chef_Tony
EDIT: oops, double post
Chef_Tony said:
if you want to have a look inside your device, whether the display cable maybe broke, here is a link to the service manual
Click to expand...
Click to collapse
I don't know if I can post this here, kindly let me know if this is the wrong thread to post.
I have xv6600 yes I am still using it
It seems that I have broken my Display cable as I don't get any display.
But sometimes when I Slide the keboard in and out many times I do get display.
I took it to the local mobile reparing shop and he says that the cable is broken but I will have to change the complete LCD, as it's not possible to change only the display ribbion.
I was a bit worried in changing the complete lcd as I am not sure what quality of LCD he is going to use.
I would like to know if it is possible to change only the display ribbion. and where can I get one. Your help will be greatly apprreciated I really love this handset and don't want to leave it
Thanks in advance
have a look in the service manual, there you will find the exact display used in the device. there is a photo of it on page 55.
Thanx a lot Tony for your quick reply, this forum is great I have learned a lot from this forum over time.
I saw the display from the service manual, infact the mobile repair guy had opened my phone and shown me the display, but I was concerned if there is any chance that i can just repair or change the ribbon instead of the complete diplay.
i haven't opened up my device, yet. i'm glad i never had to, but from all lcds i know, i think that the flex cable is integrated in the display unit and only has a plug on the other side, so you cannot detach it. also, you should think about costs. the cable alone probably wouldn't be any cheaper than the entire display and if you had it assembled in a local shop, changing the flex cable only (if possible) would be much more work than replacing the entire unit, so causing more costs. actually, i believe the cheapest way would be, buying an entire new BlueAngel. new devices go for 100eur here in germany. the official retail price for a display unit alone is 130eur.

bing maps almost got it right, any fix?

sounds ridiculous but i just updated my focus to mango on monday. for the longest time my home pc would not update it, kept giving different error codes each time. i had to replace my original phone with an ATT refurbished one and so i just assumed in the refurbishing process this "new" phone was FUBAR with updates. anyway someone recommended trying another PC, so i used my netbook to no avail and then my work laptop with great success. mango is awesome!
anyway, i love how bing maps will read directions through bluetooth in my car, but i am a little irritated that it won't continue to read the directions until i get to my destination? it will just read the direction i click on and the one after it, but then say "thank you, goodbye" and will stop giving directions. i have to manually go into bing maps again and click on the direction i want to be read to me. just curious if anyone has gotten it to read all the directions until you get to the new location without touching your phone? i notice you can go through a text message conversation without touching your phone via bluetooth, so it would be nice if you could do that with maps also.
Nope, that is the way it was designed to "work" (despite it being an illegal activity in many areas). There is nothing you can do about it, short of buying a real GPS nav system from the marketplace.
Question, Why wasn't this an issue with WM? As crapy as WM was the Maps app worked flawlessly and makes this new one look like crap. Just trying to understand I guess at to why it wasn't an issue before but it is now. It is kind of dangerous to have to tap and look at the screen to see where your going.

Anniversary update trashed touchscreen...

I've a Win Jr LTE phone & the update ran while I was out, despite telling it not to run updates without my express permission - it has now screwed up touchscreen so the phone is entirely unusable. Does anyone have any suggestions?
NB: telling me to "do a hard reset & lose everything" is NOT a suggestion I want to hear, since its not a viable option in this case, since backup on the phone hasn't worked since I got it on multiple cards & via onedrive.
I can't use browser or keyboard, anything with controls at bottom of screen is useless, there (of course) is no obvious way of re calibrating touch screen so the phone is effectively useless.
Apologies if in wrong place but the site doesn't seem to do anything other than lag, or make choices for me I didn't select.
I would strongly recommend NOT installing this (version ends. 67) as it appears as buggy as usual Microsoft efforts and has been bricking some phones completely I have since found out.
Jemma
the issue is known (by now, think it wasnt the prior cause otherwise the device should not have received the update). the problem is somehow the os uses a wrong resolution 540X960 instead of 480X854 which ****s up the touch
two options: opt in into release-preview-ring of the insiderprogram and get the .82. maybe it already fixed the problem. second option: going back...
use external display application on your pc or pair a bluetooth mouse/keyboard if its impossible to reach the insider options (be ware: if you havent signed up as insider before it may take up to 24hrs till you will find new builds)
Yeah, I had guessed it must be something like that, because the touchscreen reacts differently from one side to other and from top to bottom.
It's frustrating though because I can remember screw ups like this from Microsoft 20 years ago and they're still making same elementary mistakes, and it's not as if specs for these phones are hard to find or there's unknown multitudes of windows 10 phones out there, like with Android..
Windows 10 honestly has the potential to be excellent but if someone with 20 years IT engineering experience can't fix it for herself because the tools just aren't there then what hope non technical people? And they are just the people who will give Windows 10 traction.
Has anyone managed to find any files that set environment variables like in android?
PS if someone builds an equivalent of the Nokia E7 running Android or Windows 10 let me know, I'll happily bite their hands off, much prefer a good hardware kbd.
im pretty sure there is no way on the blu devices to interop it and made registry editing possible (should be an easy task to modify the setting for the screen resolution). you could sideloading vcreg after activating dev mode, but im pretty sure it wont be able to write reg values and cant research atm where the value for the resolution is stored
vcreg works only on Lumia
I've tried the feedback and the insider updates and I can't get to either of them because of the screen. Is it possible someone could put this up on feedback for me as I'm sure I'm not the only person with this issue.. Microsoft would only have to release a very small patch fix to solve this issue..
Thanks in advance

Categories

Resources