Related
---------------2006/May31 Updated---------------------------------------
------------------------------------------------------------------------------
＠繁体字OS
Traditional Chinese ROM <QTEK 130 AKU2 + A2DP +Push Mail ROM>
ftp://[email protected]/Universal/DarkForce_CHS130.rar
＠簡体字OS
Simplized Chinese ROM <QTEK 130 AKU2 + A2DP +Push Mail ROM>
ftp://[email protected]/Universal/DarkForce_CHT_130.rar
PLS use Extrom files which are in above archives to run correctly
See the detaile on next page and use as your own risk!
----------------------------------------------------------------------------
----------------Previouse POST-----No More following ROM----------
it took 2 hours to upload!!!!
http://www.asukal.jp/123/imate13_CHT.rar__65MB
Traditional Chinese130764 Universal
@Upgrade_Utililty.zip
*nk.nbf was my edited ROM of i-mate "JASJAR_WWE_13076_164_10900_wwe_ship" with
the wince.nls and Tarisk Font, enable to encode Japanese/S&T Chinese/Korean/Thailand.
(80% of its interface is Traditional Chinese)
*Radio.nbf and ms_.nbf are not included. pls dl offical one to flash.
*use MaUpgradeUt_noID.exe to make Falsh the ROM.
suggest to connect PC with "Sireal mode" = Light button + Power button +Stylus.
------------------------------------------------------------------
***The Templates.zip and Extrom_Unhider.cab---and Asukal.cab
@while first boot from Flasing ROM, some letters are not discribed correctly,
Such like a ????????. do not care.
@The Doctor Johnson screen to aline the stylus will be come every time after soft reset.
Please delete the short cut of "Welcome.exe" in the \windows\StartUp folder.
No more Dr,Johnson.
@using a Pocket Word, to make New Documents, you will find the error.
You make the "Templates" folder in My Documents with Chines Folder name.
The place the all templates in this archive.
No more error.
@Asukal.cab.==pls install this after finish 1st reboot from installation of Extended ROM files.
Then make soft reset again.
@Extrom_Unhider.cab is to unhide the Extended ROM.
Old Unlocker is not work, just install this cab and make soft reset,
ExtROM will visuable and workable.
http://forum.xda-developers.com/viewtopic.php?p=240986&sid=9e9c8acfa34bb46c11688318be09adb4#240986
Thanks for Mr.sef
Still not perfect and sometimes hang up if you toggle the Today Plug-in.
Pls try as your won risk.
If you feel so bad coz of the OS is not stable, pls use without Asukal.cab.
Less Chinese Interface, but more stable.
or make disable the Device Lock on the Today Screen.
Good Luck
Thanks again for the great word....
Actually I prefer to use English OS interface with the ability to read chinese only.....(I think it should be easiler to build??)
But this one is ok as I didn't install your cab file.
Thanks a lot.
Cheers,
Thanks again , will try today
CJK+Thai wince.nls and font in New I-mate ROM1.3
this is the new one only wince.nls and font, also font registry.
http://www.asukal.jp/123/v13enROM_CJK.rar 65MB
radio.nbf and ms_.nbf for Extended ROM, are not included)
PLS try, so nice! i hope...
1st one i uploaded, if you use Asukal.cab, the more mui can work.
those mui were made from old WM5, so they are not match well with
new os.
for example, thres.dll, old version dll doesnt have "Device Lock",
But new thres.dll have it, so if you use Device Lock on Today, OS will hang up.
Many of dll are different from OLD WM5, i suggest this rom only use for
test.(but without using asukal.cab, not so bad)
Good luck!
The first one after flush look great but install Asukal.cab the today plugin
will be stop try to reset can't be done.
try to install Sino_SIP_No5.zip to hand write , don't work please advise ,
also Monster SIP can't use either , I will text tomorrow and give you freeback
the default chinese input method from dopod 900?
hi asukal,
can you include the chinese input method from dopod 900 to the wwe rom devices?
need it very much!
hanks
Parker
[email protected]
ya, i have found many difference in dll between previouse and new ROM.
so some of mui is not compartible.
i found after made this 1st rom
so i suggest do not use asukal.cab pls, or use 2nd rom.
now i making new mui with dll from new rom.
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
i am willing to get it for you!
but how?
can you tell me how to do it?
thanks!
Asukal said:
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
Click to expand...
Click to collapse
Asukal, Dopod files and Modules upload to universal upload folder -- Dopod_files.rar hope that you want
Dopod_files.rar
mwang said:
Asukal said:
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
Click to expand...
Click to collapse
Asukal, Dopod files and Modules upload to universal upload folder -- Dopod_files.rar hope that you want
Click to expand...
Click to collapse
Excuse me,Would you tell me how to use the Dopod files.rar?
thanks,
but Module and file....i guess those dumped files are dead PE Header.
i need dll with correct PE headers. OK i will dump chinese ROM by my self.
but
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Asukal said:
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Click to expand...
Click to collapse
Please pm to me how to get it ,I will doing tonight
Dumping chinese ROM
Asukal said:
thanks,
but Module and file....i guess those dumped files are dead PE Header.
i need dll with correct PE headers. OK i will dump chinese ROM by my self.
but
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Click to expand...
Click to collapse
That's a great message, I'm waiting your dumper,and tell me how to return to Universal.
Thanks
How to solve inputing Chinese?
How to solve inputing Chinese?
Ce-star or system itself
No SIP for chines in it now.
you must install your favorite SIP.
to get the registry, use TRE (Tascal registry editor and export registry on device,
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
T-Mobile English ROM Bluetooth StereoHead set Profile
Today, the new rom of T-Mobile WWEnglish ROM with A2DP was uploaded.
i injected wince.nls and fonts which can be supported CJK+Thai in that.
uploaded here<no Chinese SIP and Interface,Just encode & font support>
http://www.asukal.jp/123/T-Mobile_A2DP.rar 52MB with MaUpgradeutlity.exe
see the captured screen shots.
http://asukal.seesaa.net/article/14749754.html
<no radio.nbf and ms_nbf were included. you have to dl from
http://forum.xda-developers.com/viewtopic.php?p=246434#246434
or
UNI_TMUK_12032_120_10600_Ship.exe
ROM version 1.20 lower than i-mate 1.30_AKU2
Thanks a lot again. I want the A2DP!!!! Yeah.
mwang said:
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
Click to expand...
Click to collapse
ya, i got it.
but it is not sure it can work or not
must check all regostry one by one.
i tried in my passed, still not good result.
any way, pls wait with long sight!
now i must make many kinds of rom for Japanese guys,
also trying to Get A2DP to i-mate ROM(very low possiblety to get)
also make new mui interface for AUK2,
also have to have a dinner!
also have to ,,,,,,
mwang said:
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
Click to expand...
Click to collapse
i am checking all registry from you.
question, i have found following value.
Is the "HanWang" one of OS SIP, or 3rd parties one installed by you?
[HKEY_LOCAL_MACHINE\SOFTWARE\HanWang]
[HKEY_LOCAL_MACHINE\SOFTWARE\HanWang\HangWang Pen for WinCE]
"Study"="0"
"Sound on"="1"
"Screen segment"="1"
"Default input panel"="0"
"Ink speed"="10"
"Ink width"="1"
"Ink color"="0"
"Ink type"="2"
"Recognizer delay"="400"
"Recognizer range"="600E"
Wait for your rplay.
You just got your X01HT and would like to use the latest WM6 ROM in English with your Softbank account ?
Here is a quick guide, gathering information that has been exchanged and spread accross many threads on this forum (Searches can be fastidious, I know that well...)
I have been reading this forum a lot, keeping on asking questions to everybody, so it's time I contribute a bit to help by describing step by step how I switched my Japanese WM5 Softbank X01HT to a WM6 English device
This post is target at Gaijins who want an English WM6, but still want to be able to use Japanese with it. For a Japanese MUI or ROM, I guess Asukal will probably publish something
***EDIT: for a 100% Japanese ROM, you can now have it here: http://buzzdev.net/index.php?option...um_query=read,40,30486,30597,page=2#msg-30597 ***
I was first willing to cook a ROM including all these, in order to spare some space on my HERMES. I had already cooked an "intermediary" one when Tadzio issued his method to make a "shrinked" OS ROM that would allow you to use the spare space from the ROM
Since this, no point in adding all these mods in my ROM
First: making flashing safe
Download Hard-SPL-V2 from the great Olipro to avoid bricking your device. Here: http://forum.xda-developers.com/showthread.php?t=296722
Install it
Then, get your ROM.
Download the_passenger ROM shrink version of LVSW 20070320 ROM (More space available) and install it (Read threads about flashing ROMs if you are not familiar with that...)
http://www.megaupload.com/?d=8YJATBPG
Install the Softbank AP Settings for your internet connection. You really WANT that. Big thanks to itamae without whom we'd be stuck on first of April this year... (Or I'd still be using WM5)
http://forum.xda-developers.com/showthread.php?t=298031
Now you need a Registry editor
I am used to PHM Regedit. You can find it there for free:
http://www.phm.lu/Products/PocketPC/RegEdit/
To map properly your Softbank Keyboard, do the following registry modifications:
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty] "Layout"= 30411 (Hexadecimal base)
[HKEY_CURRENT_USER\keyboard layout\Preload] "Default"= e0010411
[HKEY_CURRENT_USER\keyboard layout\Preload\1] "Default"= e0010411
More details here: http://forum.xda-developers.com/showthread.php?t=286787&highlight=keyboard+x01HT
To allow the video Call key to appear on your phone keypad, modify the registry as follows:
[HKEY_LOCAL_MACHINE\Security\Phone\Skin] Enabled = 1
Optional: getting rid of useless trayapp (It looks nice... but it Slows down the Hermes and you can replace it with better apps)
Delete TrayApp key from [HKEY_LOCAL_MACHINE\init]
Fix the disappearing micro SD (Doesnt really work for mine... But could work for yours...)
[HKLM\System\StorageManager]"PNPUnloadDelay" = dword:8196 (Decimal base)
[HKLM\System\StorageManager]"PNPWaitIODelay" = dword:8196 (Decimal base)
More details here: http://forum.xda-developers.com/showthread.php?t=294324
Now time to have your Hermes speak Japanese
Japanese fonts
Use the excellent work from Asukal, that you can find here:
http://www.asukal.jp/WM5/LetsJapanNo5.zip
I did have a problem with it: once I executed it, I could not sync with my Exchange server (Quite a pain for my push email account...)
Asukal found the solution: edit the registry, and change
[HKEY_LOCAL_MACHINE\Software\Mobem\CE-Star] "MyNLS" = "\windows\wince.nls"
Japanese input
Not using for myself, but these work perfectly (I tried):
http://www.asukal.jp/WM5/BagojsINPUT.zip
*** EDIT
If you prefer a Japanese input without the annoying "Floating bar", ie just the same input way as your original WM5 Softbank ROM, just downlaod and install the "MS IME31 J" link from Asukal's page:
http://hn801.hkes.com/Data/SIP/IME_31J_QVGA_F.zip
*** /EDIT
Silent mode switch
You're going to be missing the Softbank unique way of switching to silent mode (Only available in Softbank ROM)
The way to go around this is by using Vibra
Details available here: http://forum.xda-developers.com/showthread.php?t=277811&highlight=vibra
Download here: http://forum.xda-developers.com/attachment.php?attachmentid=31657&d=1164714506
MMS
Softbank's MMS System is a pain because it's incompatible with "classic" MMS systems...
You can download Softbank's software... But... it's slow, big, bulky, ugly, etc... If you dont mind missing the emoticons, you should go for MMSLite
Regedit, Look for Arcsoft. Delete all references to Arcsoft (Sometimes need to be done in several times, some entries being in use if you have by mistake launched MMS Composer once since your flash of the OS...)
If you dont do these eletions, MMSLite will actually not install...
Downlaod and install MMSLite
http://forum.xda-developers.com/attachment.php?attachmentid=33982&d=1170599400
It should work perfectly !
I you have enough courage (And ONLY after having installed Hard-SPL 1.11 !!!), you can try flashing your radio
You dont have to... but the latest 1.38 does seem to grant an improved battery life
http://forum.xda-developers.com/showthread.php?t=297925
Now you're done, you have a great phone with a faster OS, more storage space, improved battery life, that works perfectly with Softbank AP, can use Softbank proprietary MMS system, and can read and write Japanese
After, there are lots of other things you can do, like mounting your Extended ROM to gain extra space, Unlock the SIM, etc, etc... But it is not the purpose of this thread. Have fun reading the forum, it is well documented in other threads
Have fun !!
another gaijin
just read yourpost today...im at work and i cant wait to go home and follow each of these steps.
man thanks...this is what some of us gaijins are looking for the past few weeks.
btw,
you mentioned sim unlocking etc...etc...
you mean to say, sim unlocking is done after the wm6 flash? why would some do that before the flash?
Hello,
The only problem when upgrading is the Japanese input. I used sometimes (so I need it), but I I install Japanese input package you told in your post the I have a really annoying floating bat anywhere, and it's really unnoying.
There is no way to have same kind of input in enlish ROM?
sesaru said:
Hello,
The only problem when upgrading is the Japanese input. I used sometimes (so I need it), but I I install Japanese input package you told in your post the I have a really annoying floating bat anywhere, and it's really unnoying.
There is no way to have same kind of input in enlish ROM?
Click to expand...
Click to collapse
Try Asukal's IME package (see bottom of page):
http://asukal.net/blog/?cat=8&paged=3
... it includes the input method from WM5 (or one extremely similar). I'm using it with WM6 Black Edition 1.2 and have had no problems with input so far.
As for other Japanese/Japan-conversion-related issues:
- I found that when the Japanese wince.nls file is loaded, .NET CF programs crash with a 'PlatformNotSupportedException' error.
- With MMSLite installed, I can receive MMS, but not send.
ashikase said:
Try Asukal's IME package (see bottom of page):
http://asukal.net/blog/?cat=8&paged=3
... it includes the input method from WM5 (or one extremely similar). I'm using it with WM6 Black Edition 1.2 and have had no problems with input so far.
As for other Japanese/Japan-conversion-related issues:
- I found that when the Japanese wince.nls file is loaded, .NET CF programs crash with a 'PlatformNotSupportedException' error.
- With MMSLite installed, I can receive MMS, but not send.
Click to expand...
Click to collapse
Does it have the floating bar, like in WM5?
sesaru said:
Does it have the floating bar, like in WM5?
Click to expand...
Click to collapse
No, no floating bar.
It works just like the IME from the Japanese WM5 ROM.
Sugoi!! I'll update now
ashikase said:
No, no floating bar.
It works just like the IME from the Japanese WM5 ROM.
Click to expand...
Click to collapse
Eh! I just install ... There is the floating bar ... (>_<)
Magnificent !
I hope you'll let me be a little off-topic.
I actually installed the Japanese ROM you linked to, it works like a charm, but I have a question to SoftBank users :
I'm going to work in Japan soon (1st of April) but I want to use my Hermes as my primary phone, etc. Is it possible to go to a SoftBank shop and tell them basically "Don't ask me how, but this phone is SoftBank-compatible. Now please register it into the SoftBank network and gimme a standard phone subscription. Thanks".
Meaning how can I register my phone (SIM card ? I looked and they seem to have only outrageously expensive SIM cards on loan for 108円 a day, with no 3G connectivity. Or is it possible to get a standard subscription?)?
Thanks for your help
Yannick
sesaru said:
Eh! I just install ... There is the floating bar ... (>_<)
Click to expand...
Click to collapse
Really? I don't get a floating bar.
Did you try it on a clean installation of WM6, or did you install it after installing the Bagojs IME? Maybe some settings in the registry are causing the bar to appear.
Also, did you set your locale to Japanese in "Control Panel->System->Regional Settings"?
pharoah said:
just read yourpost today...im at work and i cant wait to go home and follow each of these steps.
man thanks...this is what some of us gaijins are looking for the past few weeks.
btw,
you mentioned sim unlocking etc...etc...
you mean to say, sim unlocking is done after the wm6 flash? why would some do that before the flash?
Click to expand...
Click to collapse
Nope, just look for it on the forum. Dont wanna spoil your fun
sesaru said:
Eh! I just install ... There is the floating bar ... (>_<)
Click to expand...
Click to collapse
hi man, following these steps:
- Install LetNo5 (Jp Font)
- Install BajosIME
- Install AkusakIME (on device) not in storage card
It work for me and my friends, perfect !!!
Goodluck!
CutKit said:
hi man, following these steps:
- Install LetNo5 (Jp Font)
- Install BajosIME
- Install AkusakIME (on device) not in storage card
It work for me and my friends, perfect !!!
Goodluck!
Click to expand...
Click to collapse
You shouldn't need to install both BagojsIME and Asukal's IME package, just Asukal's. BagojsIME provides an older version of the MS IME.
Use you own phone with SB
You can pick a ZERO Yen phone to do a new contract with SB. Then change the sime card to your onw phone. Suppose you have a sim-unlock phone.
Cuivienor said:
Magnificent !
I hope you'll let me be a little off-topic.
I actually installed the Japanese ROM you linked to, it works like a charm, but I have a question to SoftBank users :
I'm going to work in Japan soon (1st of April) but I want to use my Hermes as my primary phone, etc. Is it possible to go to a SoftBank shop and tell them basically "Don't ask me how, but this phone is SoftBank-compatible. Now please register it into the SoftBank network and gimme a standard phone subscription. Thanks".
Meaning how can I register my phone (SIM card ? I looked and they seem to have only outrageously expensive SIM cards on loan for 108円 a day, with no 3G connectivity. Or is it possible to get a standard subscription?)?
Thanks for your help
Yannick
Click to expand...
Click to collapse
I didnt have to install anything to get the Manner mode working. I think this is implemented in WMXL. But when i set the phone skin security to 1
my phone pad disappears, turns white. Renders unusable. The only fix for me is to set it back to 0.
This might be due to the carrier setting, it happens immediately after running SB external rom carrier info.
Any ideas?
Alcibiade said:
Then, get your ROM.
Download the_passenger ROM shrink version of LVSW 20070320 ROM (More space available) and install it (Read threads about flashing ROMs if you are not familiar with that...)
http://www.megaupload.com/?d=8YJATBPG
Have fun !!
Click to expand...
Click to collapse
It would be nice if you could upload the above ROM to somewhereelse, I can not download it from megaupload or rapidshare.
Many thanks.
nghihuu said:
It would be nice if you could upload the above ROM to somewhereelse, I can not download it from megaupload or rapidshare.
Many thanks.
Click to expand...
Click to collapse
Just to be very clear the ROM is not mine, it's LVSW's and shrinked by the_passenger
I think there are a few other links where the_passenger has uploaded it:
http://depositfiles.com/files/716306
http://fileho.com/download/d96fc8956370/20070320-RUU-Hermes-WWE-3.23.0.0-OS-only-More-space.rar.html
, including a torrent
http://www.demonoid.com/files/details/1075594/?show_files=&page=1&ref=1174503017#file_list
@s2k7: thanks for the tip I'll do that Thanks again
Alcibiade said:
Nope, just look for it on the forum. Dont wanna spoil your fun
Click to expand...
Click to collapse
Hi Bros, I already upgrated the new version and it is working very well. tks so much for ur contribution! and i would like to ask u a question is it possible to unlock the SIM with WM6 version? tk you in advace.
have a nice working week.
tigerwood said:
Hi Bros, I already upgrated the new version and it is working very well. tks so much for ur contribution! and i would like to ask u a question is it possible to unlock the SIM with WM6 version? tk you in advace.
have a nice working week.
Click to expand...
Click to collapse
Pof has published an unlocker an I think it should work (Havent tried yet since I dotn really need it...)
Finally HTC have released the first WM6 upgrade for the excalibur! You need to log into the e-club to download it. The FTP server is overloaded just now though.
I tried to install it on my Dash but it does not work. Invalid model? I installed the Russian WM6 ROM earlier and had do problems. What is the problem here?
Help Please!
Im still at 50% download but if I were you I would try installing it again once the phone has gone into bootloader. Basically just run it twice.
here's a faster link:
http://files-upload.com/files/472108/HTC_S620_WWE_1.27.405.1_4.1.13.44_02.94.90_Ship.exe
Thanks for your advice but it does not help. The loading starts and then it stops and tells that my phone is not the right device ie. invalid model error 244.
Is this ROM for original HTC phones only? If yes, is there a way around it?
Help please!
Thanks
try flashing the SPL only first
ftp://xda:[email protected]/smartphones/Excalibur/RUU_Excalibur_SPL-1.11_UpgradeOnly.exe
Link does not download the full file
jsp_m said:
here's a faster link:
http://files-upload.com/files/472108/HTC_S620_WWE_1.27.405.1_4.1.13.44_02.94.90_Ship.exe
Click to expand...
Click to collapse
I tried the above link and only received a 528K file. Tried to run and said it was corrupted (I expected a 40+ MB file as indicated on the file hosting download page). Tried it twice.
Still waiting for the HTC FTP server to clear up
Gary
just use a download manager...
RE:
Gary,
I took a network trace and see that files-upload.com is resetting the connection. This usually occurs when there's a configuration issue on the server or there's too many downloads occurring. I'm sure it's the massive amount of downloads occurring.
If somebody gets a successful download from either HTC or files-upload.com, could you please upload it to rapidshare.
Thanks,
Robb
Works On The Dash Like A Charm!
jsp_m said:
try flashing the SPL only first
ftp://xda:[email protected]/smartphones/Excalibur/RUU_Excalibur_SPL-1.11_UpgradeOnly.exe
Click to expand...
Click to collapse
jsp you are correct, just flash the SPL first and next just run the download. This looks like the Russian ROM, WWE version. Where is Excel mobile and word mobile and MS voice command? This is the same mean Joe Green look the Russian ROM has. Yahoo Go 2.0 comes with this ROM. Check out the file folder called Expert,Task Manager is located there. Yeah, its working like a charm on my Dash...........!
For those having trouble dowloading:
WWE:
http://rapidshare.com/files/52468415/HTC_S620_WWE_1.27.405.1_4.1.13.44_02.94.90_Ship.exe.html
German:
http://rapidshare.com/files/52468411/HTC_S620_GER_1.27.407.1_4.1.13.44_02.94.90_Ship.exe.html
Enjoy!!
Ps. working regeditor for those who want to app unlock and do other stuff:
http://forum.xda-developers.com/attachment.php?attachmentid=40434&d=1180602266
I think those links are reversed...WWE is under the german heading. Thanks, though!
jsp_m said:
For those having trouble dowloading:
WWE:
http://rapidshare.com/files/52468411/HTC_S620_GER_1.27.407.1_4.1.13.44_02.94.90_Ship.exe.html
German:
http://rapidshare.com/files/52468415/HTC_S620_WWE_1.27.405.1_4.1.13.44_02.94.90_Ship.exe.html
Enjoy!!
Ps. working regeditor for those who want to app unlock and do other stuff:
http://forum.xda-developers.com/attachment.php?attachmentid=40434&d=1180602266
Click to expand...
Click to collapse
NICE!!!! Thanks!
anyone noticed the RUS ROM has much better screen saturation? This one looks pale.. it's not a big deal, but just like it the RUS' way..
installs on vista with no problems!
This still requires a CID Unlock correct?
Are you referring to the homescreen and/or color scheme, or all the screens in general?
jsp_m said:
anyone noticed the RUS ROM has much better screen saturation? This one looks pale.. it's not a big deal, but just like it the RUS' way..
Click to expand...
Click to collapse
Ok so the first thing you need to customise is the home screen. I much prefer the recent app lists at the top so it is the first selected. Copy\Application Data\Home\HTC.home.xml off the device, use properties to make it not read only, open in notepad, and move the MRU list plugin entry above the Date/Time/Carrier Plugin. Then copy the file back after either deleting the original or making it not read only. Then choose a different homescreen then go back to the HTC one to see the change.
I've also attached the edited htc homescreen.
no, not the background files, but the screen in general.. it used to happen on Tornado that different RUUs make different saturations in the screen
This WM6 really looks much more pale than the Test RUS one, but I can live with it if I have to.. (is there any app to tune that?).. RUS was much more vivid
i have unlocked my phone. I got the code from tmobile when I try to install the rom it tells me invalid model? Any one else get this?
Hi, all guys,
I have checked this site for a long time to find a Simplified Chinese version ROM. But I'm disppointed every time I logged in.
Is there any one have same idea with me? Same wish for a Simplified Chinese version ROM as me?
Is there any one have done that or work on this? Oh is there any one can provide the procedure and material dumps for this project?
Regards
Frank Bing
I'd like 2 help.
as i know, the only thing we need 2 do is adding mui files into the current rom. then we have it!
but english rom runs faster, so install CE-Star on your device will be a better idea.
franksap said:
Hi, all guys,
I have checked this site for a long time to find a Simplified Chinese version ROM. But I'm disppointed every time I logged in.
Is there any one have same idea with me? Same wish for a Simplified Chinese version ROM as me?
Is there any one have done that or work on this? Oh is there any one can provide the procedure and material dumps for this project?
Regards
Frank Bing
Click to expand...
Click to collapse
http://www.asuspda.net/forum-51-1.html
去看看吧
Pure Chinese
Basically I agree with you! But when you want to do it you may met lots of problems.
The big challenges is you have to find all the files related with Chinese, include so files support IMEs and also some registries.
And the problem with CE-star is you can not search you contact list by Pingyin sequential. And also CE-start does not suport Pen, Brush Pen stensil.
Anyway thanks. If I have time and don't care about cost, I should do it myself. And the file list which support SC can be get by compare the dump of SC and TC of other models of HTC phone like dopod830 or cht9000.
Regards
Frank Bing
hi there
if u wanna search your contact list by chinese, check this out.
PS: after install the pocketcm, place lang.ini in the same directory. run pocketcm, then u will find everything in chinese.
After installed YaHei cab, the system displays Chinese very well.
But in the regional settings, there is no such choise for Chinese. Besides, in the IE, there is no Chinese encoding, so the chinese words cann't be read in IE.
What I want is the English interface + Chinese support, so if the problems i mentioned above can be solved, it will be great to me.
Notice: for trinity all the cooked wm6 rom only!!!!!Simplfied Chinese.
this cab will install a font and a wince.nls file, which makes your chinese contact index in ABC and regional settings including P.R.China. that means you can view chinese website.
the wince.nls is special, only works with hermes and trinity wm6, if you install it into other mobile handset, not too bad but the live messenger will fail.
i made it by myself,and i am sure it will working great.
sorry i have trouble uploading files. it is smaller then limitation,but
Chinese_Plus_P3600.zip:
Upload of file failed.
everytime.
sailer1983 said:
as i know, the only thing we need 2 do is adding mui files into the current rom. then we have it!
but english rom runs faster, so install CE-Star on your device will be a better idea.
Click to expand...
Click to collapse
I agree with you but the keyboard in offical english is conflict with A4 and Meihua.The contact pinyin list problem is so light if you use cele dialing .
jerrywei said:
I agree with you but the keyboard in offical english is conflict with A4 and Meihua.The contact pinyin list problem is so light if you use cele dialing .
Click to expand...
Click to collapse
i have no problem whith A4 input method on my trinity.
Dialer 3G (By Duronmarcel) looks great!!!
jerrywei said:
I agree with you but the keyboard in offical english is conflict with A4 and Meihua.The contact pinyin list problem is so light if you use cele dialing .
Click to expand...
Click to collapse
A4 and meihua won't, i am using them
Pocketcm
Thanks sailer for your software
And kalechen, how big is your file? Could you uploaded it again
My Phone Infor and Problem with network wizard
Trinity Dopod 810 Hongkong WM5 Traditional Chinese with CEstar.
And every time I reset the phone, I got an error message: system does not support your current service provider(46000), you have get update information from device manufacturer. Do you want to select other service provider?
The message is in TC which I translate into English? and 46000 is stand for China Mobile. When I try to select, I can not find the it in the standard list.
Anyway, The phone can be used. But I feel uncomfortable with this non-sense error message.
Is there any way which I can add that record in?
franksap said:
Trinity Dopod 810 Hongkong WM5 Traditional Chinese with CEstar.
And every time I reset the phone, I got an error message: system does not support your current service provider(46000), you have get update information from device manufacturer. Do you want to select other service provider?
The message is in TC which I translate into English? and 46000 is stand for China Mobile. When I try to select, I can not find the it in the standard list.
Anyway, The phone can be used. But I feel uncomfortable with this non-sense error message.
Is there any way which I can add that record in?
Click to expand...
Click to collapse
You can dismiss it for ever, watch your choises carefully.
Web: http://www.pdaviet.net/showthread.php?t=15727
Link will be added by tomorrow
thinh30 said:
Web: http://www.pdaviet.net/showthread.php?t=15727
Link will be added by tomorrow
Click to expand...
Click to collapse
Link is up
can someone download it and put it on a different share?
i tried to register but not a chance
mrjay said:
can someone download it and put it on a different share?
i tried to register but not a chance
Click to expand...
Click to collapse
First time I'm trying this, let me know if it works... Below has part 1 & 2 combined...
http://www.4shared.com/file/27713923/404605d7/HTC_Trinity_3000722PV_Mysterious.html
it's working downloading right now
mrjay said:
it's working downloading right now
Click to expand...
Click to collapse
...and videocalling is missed...
Laci30 said:
...and videocalling is missed...
Click to expand...
Click to collapse
Yes!! Because the original skin for Dialer came from a Prophet ROM (PDAViet Mysterious 1.0 for Prophet by Cloudyfa).
http://forum.xda-developers.com/showthread.php?t=336730
I should know, bc i was one of the major skin contributer for that rom! It's my guess, that the rom was such a success that they ported the graphics so trinity users can enjoy. But i guess they forgot some details such as video call...
Looks O.k, but cannot get contacts to work...First time i've ever had a problem "the file :mscontacts cannot be opened, etc
Any ideas?
Blartiartfast said:
Looks O.k, but cannot get contacts to work...First time i've ever had a problem "the file :mscontacts cannot be opened, etc
Any ideas?
Click to expand...
Click to collapse
got that error too but i installed PocketCM and changed the shortcut
Blartiartfast said:
Looks O.k, but cannot get contacts to work...First time i've ever had a problem "the file :mscontacts cannot be opened, etc
Any ideas?
Click to expand...
Click to collapse
Confirmed this is a problem, resolved by creating the following registry additions... do this at your own risk...
Goto Programs, then Applications and open PHM Registry Editor
Click the "+" symbol next to HKEY_Local_Machine, then Software, Microsoft,
Shell, and Rai
Should be here HKLM\Software\Microsoft\Shell\Rai
Click Edit then "New Key and call it ":MSCONTACTS" without quotes.
Click on newly created Key:
Create New String Value Under name Enter "0" no quotes
In Value Date: Enter "Contacts" no quotes
Create New String Value Under name enter "1"
In Value Data: Enter "poutlook.exe contacts" no quotes
Create New DWord Value Name Enter "2" no quotes
In Value Data: Enter "1"
Click OK and just to be safe, I would do a soft reset... though should work even without one...
If done properly, your screen should look something like the below pic:
Works a treat James. Thanks.
PhamQuang add contact-fixed
Enjoy
xt9
How can I disable XT9 keyboard??!!
xt9
Hello Franzi,
sorry for my english. I´d same problem. I felt deleting all data with xt9 from registry ... This drastic order, I know, sorry for all ROM guru.
After soft reset xt9 don´t work ....
If provided it exist alternative method, I don´t know ....
HansB
franziskaner said:
How can I disable XT9 keyboard??!!
Click to expand...
Click to collapse
Task Manager
Is possible to have the task manager used in this ROM??
This is a great ROM, ive been using it for a few days now and it seems stable and battery is fine, Great work
Only problem i have found is that in the 'Audio Manager' when you start to goes through the library that the top title bar does not refresh and the words get written over eachother. Anyone found this?
How to take out this ROM
I have a Trinity bought in Italy from TIM and I installed this ROM on it. The problem is I'm having a lot of issues as:
- GPS has not worked since I installed it
- HDSPA is not working. It was working with the original one and the connection speedy descreased considerably.
- Network configuration desappears after a soft reset
- Email configuration desappears after a soft reset.
As I recently moved to Italy and my mobile is the only way to access internet I need it working properly.
The problem now is that everytime I try to install another ROM a communication error pops up in the beginning of the upload process (from my dektop to Trinity).
Anyone, please help me!!!
This is a great ROM and im still using it, with a some extra 'touch' programs for fun.
I see that ther is.....
TouchFLO ROM 3.00.07.24 CHO HTC TRINITY
on the PDAviet site but i cant read vietnamses to read it, can anyone get a link to this new ROM?
Thanks in advance
Here U go!
jab1a said:
This is a great ROM and im still using it, with a some extra 'touch' programs for fun.
I see that ther is.....
TouchFLO ROM 3.00.07.24 CHO HTC TRINITY
on the PDAviet site but i cant read vietnamses to read it, can anyone get a link to this new ROM?
Thanks in advance
Click to expand...
Click to collapse
http://www.pdaviet.net/attachment.php?attachmentid=62746&d=1196192305
Cheers!
hoja67
jab1a said:
This is a great ROM and im still using it, with a some extra 'touch' programs for fun.
I see that ther is.....
TouchFLO ROM 3.00.07.24 CHO HTC TRINITY
on the PDAviet site but i cant read vietnamses to read it, can anyone get a link to this new ROM?
Thanks in advance
Click to expand...
Click to collapse
Here:
http://sym-viet.com/Mobifuns/TRINITY/HTC_Trinity_3.00.07.24_18538_Mysterious.rar
password: PDAVIET