I was using wm 2003 se and when I connected my BA to pc
via usb cable the ba will connect to internet automatically. But
as I upgrade to wm2005, my BA can not connect to internet anymore using the same usb connection. It looks like the pc is treat my BA as a SERVER or NETWORK CARD not a CLIENT.
I want to know how to configure the network to let my BA
share pc internet connection? Many thanks!
Hi, is it possible to connect the BA, via WIFI (P2P connection), to a PC with a WIFI card and use the PC's internet connection tu surf the web?
I tried: I can make the BA get the signal, but when I try to connect to a website it doesn't work.
Thank you in advance.
Bye.
fabbor75
I don't think its possible to do this directly using a P2P WIFI connection, but if you can get activesync to work over a P2P WIFI connection, it might work. I know is I use activesync over a USB connection & I can surf the net all day, so I'm thinking it might be possible to use the same approach over wifi.
Thing is I don't know if its possible to use activsync over P2P wifi
Solution
The problem is that windows not chain the IP Adrress of PC and Pocket bacause Nat not work under Xp basic system.
It's possible however to install a third party software to route packet from Pc to pocket i think all NAT's program can do that!!!!
Find one and Good Luck.
With WM2003SE i've used WINROUTE
Maybe?
Hi fabbor75!
Maybe your problem isn't the connection to the PC, it's maybe the DNS-resolution. Check your TCP/IP-settings on your BA, the important thing ar the DNS-Server.
The badest thing you must do is that you have to configure all TCP/IP setting manually: IP-Address, Subnetmask, Gateway and DNS-Server.
But you have to configure EXTERNAL DNS-Server on your BA, this one you got from your internet-provider, not the PC to which your BA is connected P2P. And the Gateway is the IP-Adress of your WiFi-card which is built-in in your PC.
Maybe this helps you.
Greetings, Peter
Hi there, I have a big problem that will force me to downgrade to WM5 if I can't solve it.
Here's the facts:
I don't have a telephone line at home and I'm connecting to internet using a flat GPRS/UMTS connection with Vodafone using my TyTN as bluetooth modem (using the old WM5 DUN profile).
Since I upgraded to WM6 (and I love it) the DUN profile and Wireless Modem has been replaced by Internet Sharing application. It works very fine but it messes up my network connection with my other PC.
I used to share the internet connection this way: the bluetooth modem was connected to my main PC (AMD Sempron). The LAN (manually setted up) on this PC was: 192.168.0.1 / subnet 255.255.255.0. The LAN (manually setted up) on other PC (AMD Athlon) was 192.160.0.10 / subnet 255.255.255.0 / gateway 192.168.0.1. It all worked very fine.
Now as I connect the PAN bluetooth internet sharing my main PC (Sempron) acquires a new network address (the TyTN seems to be automatically setted as 192.168.0.1) so the LAN on the PC is 192.168.0.153 /subnet 255.255.255.0 /gateway 192.160.0.1 and the connection works fine but I'm not able anymore to connect via LAN tothe other PC even if I try different LAN settings on the Athlon (I tried to manually set it as 192.168.0.10 /subnet 255.255.255.0).
Who can tell me how to configure the LAN setting on the 2 PCs so that I can access internet enabling PAN bluetooth on the TyTN with the main PC (Sempron) and still continue accessing remote folders and files via LAN on the other PC (Athlon)?
It would be great if I could share the connection with the 2 PCs like I did before, but I'll be ok if I can connect to internet with one and have a working LAN between the 2 PCs.
Hope I explained it well.
Waiting for suggestions. Thank you!
Pick a machine that is to be the internet gateway. Do this by initiating the BT PAN network on the first machine. On the first machine's IP stack, Enable Internet Connection Sharing. On the second machine, use the first machine's IP as your default gateway.
You should then be able to access the internet from both machines.
marty_73 said:
Hi there, I have a big problem that will force me to downgrade to WM5 if I can't solve it.
Here's the facts:
I don't have a telephone line at home and I'm connecting to internet using a flat GPRS/UMTS connection with Vodafone using my TyTN as bluetooth modem (using the old WM5 DUN profile).
Since I upgraded to WM6 (and I love it) the DUN profile and Wireless Modem has been replaced by Internet Sharing application. It works very fine but it messes up my network connection with my other PC.
I used to share the internet connection this way: the bluetooth modem was connected to my main PC (AMD Sempron). The LAN (manually setted up) on this PC was: 192.168.0.1 / subnet 255.255.255.0. The LAN (manually setted up) on other PC (AMD Athlon) was 192.160.0.10 / subnet 255.255.255.0 / gateway 192.168.0.1. It all worked very fine.
Now as I connect the PAN bluetooth internet sharing my main PC (Sempron) acquires a new network address (the TyTN seems to be automatically setted as 192.168.0.1) so the LAN on the PC is 192.168.0.153 /subnet 255.255.255.0 /gateway 192.160.0.1 and the connection works fine but I'm not able anymore to connect via LAN tothe other PC even if I try different LAN settings on the Athlon (I tried to manually set it as 192.168.0.10 /subnet 255.255.255.0).
Who can tell me how to configure the LAN setting on the 2 PCs so that I can access internet enabling PAN bluetooth on the TyTN with the main PC (Sempron) and still continue accessing remote folders and files via LAN on the other PC (Athlon)?
It would be great if I could share the connection with the 2 PCs like I did before, but I'll be ok if I can connect to internet with one and have a working LAN between the 2 PCs.
Hope I explained it well.
Waiting for suggestions. Thank you!
Click to expand...
Click to collapse
silverfox0214 said:
Pick a machine that is to be the internet gateway. Do this by initiating the BT PAN network on the first machine. On the first machine's IP stack, Enable Internet Connection Sharing. On the second machine, use the first machine's IP as your default gateway.
You should then be able to access the internet from both machines.
Click to expand...
Click to collapse
Ok, I started the BT PAN on my main machine (AMD Sempron) but how do I enable the connection sharing? When I was using the DUN connection I used the Advanced Options section to enable the Connction Sharing, but where do I find this opzion now?
On a Windows Machine the IP range to be assigned when Internet Connection Sharing is turned on is 192.168.0.x. That is also the range used by Internet Sharing on the phone. This is a routing conflict. You cant have a 0.x being handed out from the phone to the 1st computer and then have that computer handing out 0.x addresses to any other computers. The IP range the Phone hands out needs to be regedited to something else like 192.168.1.x As far as I know, you cannot change the address range in Windows Internet Connection Sharing. You will have to do it on the phone.
If this helps.
I had been successfully tethering via Bluetooth with WM6's Internet Sharing function, and was doing so in XP. Well we just took the Vista plunge and I'm having an issue. The Network Connections is showing my BT connection as "Local Only" meaning I can browse other pc's on the network, but I can't get to the internet. My WiFi connection to my router connects to the internet with no problem (The Wireless Connection shows "Local & Internet Access."
So I can not get out to the internet using my Tytn as my connection. I used the "Diagnose Problem" function in Vista, and it tells me that it cannot ping IP address 192.168.0.1. This is the IP address of my router. I don't want it to try to hit that IP address, but I can't find a way to tell it NOT to. All the settings in TCP/IP protocol are set to obtain an IP address automatically. But it seems that even while using BT as the connection, it still wants to get to my router first, even though I'm not using my WiFi at all. I even tried disabling the WiFi connection. Still the same issue.
Does anyone know what I can do to get the pc to stop trying to get my router first?
Thanks!
Tell me about it! It took me an age to find some drivers that worked with my bluetooth, I ended up using the Toshiba stack. After a lot of fiddling I got it working but when it runs it is very hit and miss and I have yet to transfer anything between devices let alone surf the net! Have you tried the bluetooth set up wizard?
stpete111 said:
I had been successfully tethering via Bluetooth with WM6's Internet Sharing function, and was doing so in XP. Well we just took the Vista plunge and I'm having an issue. The Network Connections is showing my BT connection as "Local Only" meaning I can browse other pc's on the network, but I can't get to the internet. My WiFi connection to my router connects to the internet with no problem (The Wireless Connection shows "Local & Internet Access."
So I can not get out to the internet using my Tytn as my connection. I used the "Diagnose Problem" function in Vista, and it tells me that it cannot ping IP address 192.168.0.1. This is the IP address of my router. I don't want it to try to hit that IP address, but I can't find a way to tell it NOT to. All the settings in TCP/IP protocol are set to obtain an IP address automatically. But it seems that even while using BT as the connection, it still wants to get to my router first, even though I'm not using my WiFi at all. I even tried disabling the WiFi connection. Still the same issue.
Does anyone know what I can do to get the pc to stop trying to get my router first?
Thanks!
Click to expand...
Click to collapse
stpete111 said:
I had been successfully tethering via Bluetooth with WM6's Internet Sharing function, and was doing so in XP. Well we just took the Vista plunge and I'm having an issue. The Network Connections is showing my BT connection as "Local Only" meaning I can browse other pc's on the network, but I can't get to the internet. My WiFi connection to my router connects to the internet with no problem (The Wireless Connection shows "Local & Internet Access."
So I can not get out to the internet using my Tytn as my connection. I used the "Diagnose Problem" function in Vista, and it tells me that it cannot ping IP address 192.168.0.1. This is the IP address of my router. I don't want it to try to hit that IP address, but I can't find a way to tell it NOT to. All the settings in TCP/IP protocol are set to obtain an IP address automatically. But it seems that even while using BT as the connection, it still wants to get to my router first, even though I'm not using my WiFi at all. I even tried disabling the WiFi connection. Still the same issue.
Does anyone know what I can do to get the pc to stop trying to get my router first?
Thanks!
Click to expand...
Click to collapse
The internet sharing function on the TyTn used 192.168.0.1
You are saying that your router is also using the same address range.
That is a no-no. Change the router address to 192.168.1.1, and I think you will see better results.
@boz - Actually I have no issues connecting to Vista via Bluetooth, and all profiles work great (I'm using the latest Broadcomm stack). My issue is in my Network Connections, not BT itself.
@Wildbill - the Tytn is not using 192.168.0.1. The PC is trying to ping that IP address because it is the address of my wireless router, and the first time I ever accessed the net with that pc, I did so via WiFi through my wireless router at home. Now, what I am trying to do though is get on the internet in my car, while nowhere near my wireless router. But my pc still seems to want to get to my router as though I'm trying to connect to the net via Wifi, when I'm actually just trying to get to it through my phone. The PC connects to the phone with no problem, and the phone is connected to the internet, But, my problem is that I can't figure out how to tell my pc to NOT look for my wireless router's IP address first.
BT DUN was so much easier with Cingular. I wish one of the cooks could figure out how to get the DUN profile back into WM6's BT stack.
I am really confused here.
When you use Internet Sharing on the TyTn, You are using the Tytn to allow other devices to access the Internet thru the TyTn.
When you do that, the TyTn hands out the address of 192.168.0.100 and it is the gateway, and the Gateway address is 192.168.0.1.
If you have your home router using the same address range, you have the PC that the Tytn is sharing it's internet connection with seeing to addresses within the same range, and two gateways with the same address - The PC LAN card is seing the router at 192.168.0.1 and the Buetooth PAN is seing the phone gateway at the same 0.1 That is what I was trying to say. It won't work like that.
Oh ok I see what you're saying. I was assuming that when it gave me the error, that it was trying to ping my router since I knew that to be my router's address. I did not realize that the Tytn used such a similar gateway.
To correct what I said in my first post: I said that it was trying to ping "IP address"... the exact error message reads "Connot Communicate with DNS Server 192.168.0.1"
It shows a nifty little diagram of the PC connected to the Cingular Bluetooth network connection, then another line connecting to a picture of earth, which they call "internet," but there is a red "X" over that line showing that it can't connect to internet. When you click on Diagnose problem, the above error message is what comes up.
So now, I need to make sure I understand what you are saying Wildbill. I see what you mean from your post... being that I don't connect to my router anymore, ever, at all (since the pc never comes out of the car anymore, and I'm way out of range of my wireless router even in the driveway) what do I need to change? Everything in TCP/IP protocol settings are set to obtain addresses automatically.
Another interesting thing to note is that I did not have this problem when I had XP in my car, and I connected to my wireless router with that pc too. But Internet sharing worked fine with it.
If the only things connected are the TyTn and a PC, then the PC will obtain an IP from the TyTn, and it will be 192.168.1.100. It will tell the pc that the gateway is 192.168.0.1, which is the TyTn. Since the TyTn has Bluetooth 2.0, I would speculate that you could connect additional BT devices to the same BT PAN, and the TytN would likely hand out additional addreses like 0.101, 0.102, etc. I have not tried that nor have I read about it.
See that's what I gathered too. So I don't know why it can't get out to the internet, unless it's that Vista just won't let it for some reason. This bugs me because Internet Sharing worked fine in XP, and BT DUN works fine with Vista with my other phone. Unfortunately I'm getting rid of that phone. If my Tytn had a DUN profile in the BT stack I'd be fine. Weak.
i tehering in wm6 vista using bluetooth ban
I just bought a program called Remote Desktop Client (by Xtralogic) and installed it.
However, when I tried to connect to my work, I get a notification 'Socket Is Not Connected'. I called the helpdesk of my work and they say it is not possible to have the server running on my mobile device......
The address I m trying to connect to is 172.20.20.20 with domain 'flexinet.local'. I used the correct username and password.
Maybe you guys can help me on my way?
First...I wouldn't go sticking those IP details up for the world to see. I'm sure it's safe enough but still. Next, have you checked not only the IP but the ports are correct? Then you should ensure that those ports are forwarded from the external domain you're connecting to.
Another thing you may want to check is if this app needs the prefix, i.e. http://YourDomain.com etc.
Lastly...are you attempting to connect from outside the network? Are you connected to the network via WiFi or are you attempting to connect via 3G from a remote location?
172.20.20.20 is a private address... 10.x.x.x, 192.x.x.x and 172.16.x.x to 172.30.x.x are private ranges and not valid on the internet - you'd need the external ip address or the fully qualified domain name (FQDN)... RDP uses port 3389 (if it's not been changed on the server) so your firewall will also need to be open and the transport you use to connect will also need to allow 3389 (WIFI / 3G)...
That is assuming you're trying to get to your server from outside your local network...
Did you try connecting to your work vpn (if you have one) so you can get inside your work network, then use the rdp client to connect to your machine?
Sent from my HTC Desire using XDA App