Infrastructure & Adhoc Wifi autoswitch - MDA III, XDA III, PDA2k, 9090 General

I've got a WiFi router at home which I connect to with both my laptop and/or my XDA2s. this works great but when I'm at work I have to do a HEAP of reconfiguring to get the XDA2s to talk direct to the laptop in adhoc mode.
What I'm looking for is some way to set up the XDA to connect to the router (infrastructure) if it's available, and if not, connect to the laptop (adhoc) without me switching it manually every time.
any ideas?

Related

Wireless Connections - from MDA3 to belkin wireless router

HEEEEEELLLLPPP!
I have managed to connect to my wireless router at home via my MDA3 but whenever I open IE and try and surf it responds by telling me that the page isnt available. ie. it cannot surf the net!
As soon as I put the MDA3 into the cradle it works fine. I know these are two different ways of connecting to a network but how do you surf the net via WiFi to your home wireless network?
Hello meatychi,
Try connecting the MDA3 as the only device on the router. You may have to switch off other devices first and reboot the router.
I have this problem too, and i can NOT use my pda2k and the Fujitsu laptop at the same time on the wireless router. It will work if the laptop is hooked up via cable and the pda2k is on wireless, but never together.
I returned the router to the shop and we tested it there. It all worked as it should with their wireless equipment, which leads me to believe that the wireless components in my Fujitsu laptop interfere somehow.
Let me know how you go.
Regards,
Atze.
Interesting!
The only other device I have on wireless is my mac and that wasnt on when trying to get the MDA to work.
Did you use a static IP or DHCP?
Could you give a little more detail into the way you setup your PDA to communicate with your wireless router?
Initially I used DHCP, when that didn't work I switched to static IPs
which didn't help either. I even throttled the router back to 802.11b, as I thought that the two different protocols may be in a tangle, but... you guessed it. No luck.
After all this I reverted back to DHCP and switched the router back to 802.11b+802.11g. The laptop is back on a cable
Everytime I try something with both devices hooked wireless I have to restart the router, as it will no longer work with either device.
I have set up the pda2k as follows:
Connect to Work network,
Using WPA-PSK authentication
TKIP Data Encryption
It is set to access All Available networks,
Automatically connect to non-preferred networks
Use server-assigned IP address
Leave DNSs and WINSs blank
Performance is usually set to Best Battery, but I vary that when I go downstairs. (doesn't appear to improve the range thoug I think it's pretty poor.)
Auto turn of WLAN if not connected is ticked to kick in after 2 minutes.
Regards,
Atze.
Thanks for the info I will try again tonight!
i'LL LET YOU KNOW HOW i GET ON!

How to connect to internet on a laptop?

I have no problem to connect to the internet (to update weather, news etc) when I connect my P3300 to my desktop (which connect to the internet through a hardwire modem and a hardwire router). When I connect the P3300 to my laptop (the laptop is connect to internet through the WIFI rounter), I then cannot update those weather or news in my P3300. What setup do I need to change in the P3300 in order to be able to get to the internet through the laptop's WIFI connection? Thank you for any help.
Should happen automatically if you have a standing ActiveSync connection. No special settings needed. On the other hand - Check your firewall. Maybe some soft on the laptop is preventing your PDA from getting access to the internet!
Thanks Theonly1....one other thing though, I am using Vista ultimate x32....
not tried this yet but....just plug in and it will recognise the phone as a modem or GSM connection for internet surfing on the laptop?
Thanks again
Thanks for the feedback
Hi,
Thanks for the feedback. I have try to disable the firewall, but it still cannot connect to the internet. By the way, the laptop us window XT. If I enable the WIFI on the P3300, then it can connect to the internet by it's own WIFI. But if I disable it's own WIFI, then it did not connect to the internet throught the laptop's WIFI connection. I think there must be some setting in the network connection, so that it will be able to use the laptops WIFI and get information through it. But I do not know how. Any help is appreciated. Thanks again

Special tethering app needed...

I have a Evo 4G with CM 7.1 I have used the built in app, but it will not work for my needs. I have looked and used android wifi tether for root users, but I don't think this will work either.
My set up would include a desktop (wired to router), laptop, wireless router, and phone.
What I would like to do is use my phone as a backup connection if my home internet goes down (which happens enough). But since all of my devices are not wireless I have an issue of connecting to the internet though the phone. So I am looking for an app that would allow me to share my phones internet though wifi, but instead of the phone becoming an AP. I would like it to connect to my wireless router. From there I would set up my default gateway to be my phones IP address which would route the packets to my phone. This way all of my pc's and internet enabled devices could have a data connection when my home internet is on the fritz. Now I know alot will say the phone will not have the bandwidth to support that many devices, but I will disagree becuase in my testing I have got 1.7down .7up consistent on my phone which beats my awful home internet at 1.5down and .5up.
Bam > http://forum.xda-developers.com/showthread.php?t=1046764&highlight=fix
I don't see how this will work for me... I want to turn on tethering and connect my phone to a wireless router and then connect my computers to the wireless router also. The router would hand out ip and would set the default gateway to the ip of the phone.
Could you use an app that allows you to tether using USB and connect a usb from the phone to the router?
I was using the barnacle app to wireless tether when I had cm7, but not using a USB.

Having the S3 Connect to my Laptop's Wifi

Hey I want to create an adhoc connection to allow my S3 to use wifi connection from my laptop?
I tried creating one but the S3 wouldn't find it on WPA and no security.
This is because my S3 has very slow speed and low connection to my routher which is two floors below me. My laptop and iPad and stuff can connect fine but not the S3. I tried the *#0011# trick but to no avail. If I try a factory reset how do I backup everything?
But how can I have my S3 connect to my Laptop for Internet, is this possible?
yea the s3 cannot see the ad hoc network its not in our wifi profile.
Last time i checked, i don't recall typical WiFi chips being able to function as a WiFi access point... could be wrong, though.
There are some apps that claim to enable ad-hoc networks on certain phones. Not sure if they are compatible with our phones our not.
If you're using windows 7, you can try connectify. It'll create a real wifi ap instead of just ad-hoc, also simultaneously allowing the computer to connect to your router's wifi.
Use Connectify
yo can use connectify and make your wirless adapter to an access point then this application could share your internet connection via this virtual access point
Bronos said:
Hey I want to create an adhoc connection to allow my S3 to use wifi connection from my laptop?
I tried creating one but the S3 wouldn't find it on WPA and no security.
This is because my S3 has very slow speed and low connection to my routher which is two floors below me. My laptop and iPad and stuff can connect fine but not the S3. I tried the *#0011# trick but to no avail. If I try a factory reset how do I backup everything?
But how can I have my S3 connect to my Laptop for Internet, is this possible?
Click to expand...
Click to collapse
I am also have the same problem like you

Galaxy S3 Question (PC WIFI)

This may have been asked before. I am curious if it is possible to connect to an internet connection sharing device (laptop, desktop), and use that particular connection for internet based access on a samsung galaxy S3. I know that you can reverse tether to allow the PC to connect to the phone for internet. That's not what I'm looking for. I have a laptop that I want to be able to connect to from the phone to the WIFI connection, and access the internet via the shared LAN connection that I have on the laptop.
drivel2787 said:
This may have been asked before. I am curious if it is possible to connect to an internet connection sharing device (laptop, desktop), and use that particular connection for internet based access on a samsung galaxy S3. I know that you can reverse tether to allow the PC to connect to the phone for internet. That's not what I'm looking for. I have a laptop that I want to be able to connect to from the phone to the WIFI connection, and access the internet via the shared LAN connection that I have on the laptop.
Click to expand...
Click to collapse
Internet Connection Sharing on your Wifi, set it to Ad-Hoc so it broadcasts a signal. My laptop has Intel MyFi so that part's done automatically (I can be both connected wirelessly and share my connection) but setting it this way should work.
NateTC said:
Internet Connection Sharing on your Wifi, set it to Ad-Hoc so it broadcasts a signal. My laptop has Intel MyFi so that part's done automatically (I can be both connected wirelessly and share my connection) but setting it this way should work.
Click to expand...
Click to collapse
Doesn't show up on the phone. Is there something I need to do to allow it to see ad-hoc networks?

Categories

Resources