What is the last version of the :
O.S Rom
Rom Extension
Radio
for - O2 Xda II - ?? (qtek 2020)
i have the OS ->Xda_II_172181_Final WWE
Rom ex -> RUU172800WWE CDL
radio -> don't remember
thx
you already owe the latest official.
newer are unofficial (WM2003 Second Edition)
radio -> 1.17
xda2 mda2 stuck boot loader mode
I was trying to upgrade my xda2
Now its stuck in and wont turn on it just shows
serial
v1.06
and wont turn on
any one please help!
andy17 u must install O.S rom in u xda2....
Related
I have a xda2i with the following info
ROM version 1.10.00 WWE
ROM date 12/24/04
radio version 1.00.00
protocol version 1337.39
ExtRom 1.10.124 WWE
I am looking a for a upgraded version if anyone can help... it would be great if there was a wa to get rid of the o2 custom stuff on the xda too i dont like that too much can anyone help
Acid
At the moment there are no updates for the XDA2i but there is rumours of one in the pipelines... if its true or not remains to be seen but we can only hope.
As for removing the customised crap just do a hard reset (you'll loose all your stuff) , press power + reset.
Then when its installing a box will appear asking "Personal" or "Corporate" user, choose the corporate option and enter the password "0506"
hi
at the moment the only newer rom from our factory rom is that of pda2k.. do a search for my posts and in there you will see where to get it and how to get past the country id error..
Danny-B- I didnt see the box will appear asking "Personal" or "Corporate" user it just says will customize my xda in 3 seconds and i cant do anything to stop it and i cant even uninstall the software it is linked into everything.. its really annoying and this o2 thing is just eating up memory and space... can you help
Acideax
I have a xda2i with the following info
ROM version 1.10.00 WWE
ROM date 12/24/04
radio version 1.00.00
protocol version 1337.39
ExtRom 1.10.124 WWE
Are you sure you didnt miss it ?
Im sure it auto installs personal user if not selected within a certain time.
The best thing to do would be, Hard reset it, then just sit and watch it install till it gets to the choice point.
Another thing that might be slowing your device down can be the SD card if its over 512Mb , the XDA 2i sems to have a slight problem with them and slows everything down, well it does in my case anyway.
rom
my xda2 i spec.
rom version-1.11.00 wwe
rom date-01/27/05
radio -1.00.00
protocol-1337.39
ext rom version-1.11.923 wwe
XDA2i & WM2005 ?!?
HI !
I´m using the XDA2i / O2-Germany with WM2003SE..
ROM 1.11.01GER
Ratio 1.03.00
Protokoll 1337.42
ExtROM 1.11.132GER
I´ve tried to upgrade to WM5 but...
HimaUpgradeUt.exe 1.2.0.0
nk.nbf 1.50f
WM 2003 ROM Image Editor 1.4.26
the firste tries I´ve got ERROR: wrong device, so I changed the devicetype from PH10 to PH10C like written on start-settings-deviceinformations...
I´ve tried again...
I started HimaUpgradeUt.exe and after a few sec. the screen say´s "deviceinformations: XXX
XXX
ROM XXX
Image info´s XXX
.....
if I press UPGRADE the massage "don´t remove USB & power" appiers then a new screen with the status for the upgradeprocess....
BUT... after 20 sec. I always get ERROR 101 (connectionerror).
- any idea ?
The XDA2i does not support the leaked WM2005 it only works on the XDA 2
Although the devices look the same the internal hardware is different.
The XDA2i does not support the leaked WM2005
sad to hear that...
ok, thank you but do you know if it´s possible to get an upgrade in the future ?
do you know where the problem is? (Image ore Updatesoftware?)
???!!!
The problem is that the software (wm2005) has to be custom made to suit the hardware in the phone so ... HTC - the makers of the phone or O2 would have to "build" the software for the phone.
Its because all the correct drivers and such have to be correct for the device to function.
But you never know, it might be a possible upgrade in the future, youll just have to wait and see.
Upgrade for XDA2i
Ok, I´ve found an original Upgrade-Tool & the Rom-files from o2UK....
My next Problem is the Password to edit the nk.nbf to chage the Image...
I´m using WM 2003 ROM Image Editor 1.4.26
Xda IIi ROM v 1.10.124 (43.6MB) - english
AlUpgradeUt.exe 2.0.0.1
when I start the upgrade I always get the
"ERROR 120: COUNTRY ID ERROR".... that´s because I have the
o2 - Germany device...
Can somebody help me to findout the right password for the Rom-editor ?
[/b]
i want DopoD M700 update
Try B&B4.3, u will impress with this rom.
Anyone know where I can get the Dopod M700 CHT Rom beside from DopodAsia? Thanks!
Does B&B4.3 for artemis / P800 ? the buttons are different..
M700 got different buttons alocation. No GPS.
I'm looking for WM6.1 Vanilla specific for Dopod M700 only
-
I'm using Dopod M700 too.
You can use Black & Blue 4.3 or 5.0 (but 4.3 is better) or the best one is Artemis Touch 4.01 (or maybe 4.02 better, I'm testing 4.02).
All of them work good with GPS
Those ROM is for Artemis & Dopod M700 is Love, so you have to change the button setting, it is so easy.
Ok, I found the Dopod P800W CHT Rom from somewhere and flashed my Dopod M700 by editing the hex file to match the Model ID. However, after flashing the Dopod P800W CHT Rom, my Dopod doesn't show EDGE connection but just GPRS. I'm sure that it was EDGE connection with my previous ROM. Anyone know how to get back to EDGE connection? My previous ROM and current ROM are:
Previous ROM:
LOVE 1.3 WEN WWE
Rom Date: 16/11/07
Radio Ver: 03.07.90
Protocol Ver: 4.1.13.51
Current ROM: (File Name: P800w_TW_CHT_WM6_Upgrade_20070713)
3.7.709.1 CHT
Rom Date: 21/6/07
Radio Ver: 2.67.90
Protocol Ver: 4.1.13.51
Ext_Rom Ver: 3.6.709.101
Even I flashed the radio Rom to 03.07.90 or 03.12.90, the connection still at GPRS status. Even the Model of P800W and M700 are EDGE unabled in Taiwan. Therefore, I don't know why the EDGE doesn't appear on my connection.
thanks a lot for sharing but my M700 was hang after i hard reset and it stop at the main startup
IPL 1.28.0001
SPL 1.28.0000
GSM 02.69.90
OS 1.28.0.0
Anty solution for dat ????????
thanks in advance
You need to update the SPL to 1.11.0000 in order to flash/update your Dopod M700. you need to go to service mode and using usb cable to update it.
Pardoon said:
thanks a lot for sharing but my M700 was hang after i hard reset and it stop at the main startup
IPL 1.28.0001
SPL 1.28.0000
GSM 02.69.90
OS 1.28.0.0
Anty solution for dat ????????
thanks in advance
Click to expand...
Click to collapse
Hi ... Did u fix your m700 ... i have flash this rom and right now i encounter the same issue here..
I try to copy the rom in the micro sd and try to boot up " press " recorder and reset " from SD to write back the rom ... but still not work.... hang in another screen have red,green and blue color ...help help..
lamjeff said:
Hi ... Did u fix your m700 ... i have flash this rom and right now i encounter the same issue here..
I try to copy the rom in the micro sd and try to boot up " press " recorder and reset " from SD to write back the rom ... but still not work.... hang in another screen have red,green and blue color ...help help..
Click to expand...
Click to collapse
if you brick your device you have to copy the original ROM into your SD.. and format your SD with FAT system file.. and then if you press the record botton and the reset and don't work.. try to press the record and the power while your mobile is off.
tan880121 said:
You need to update the SPL to 1.11.0000 in order to flash/update your Dopod M700. you need to go to service mode and using usb cable to update it.
Click to expand...
Click to collapse
i have already update the spl to 1.11... btw, can u let me know how to go to serivce mode ..... coz right now i try to use usb cable to connect the pc... no response.... help help
y_bother said:
if you brick your device you have to copy the original ROM into your SD.. and format your SD with FAT system file.. and then if you press the record botton and the reset and don't work.. try to press the record and the power while your mobile is off.
Click to expand...
Click to collapse
Thanks for your information... I have work on this machine over 10 hrs to search over the forum here.... at last i can flash it when i press record and reset button and at the same time connect with usb cable ...... after that i can flash it thru PC ...........
tks...
Hey,
I'm pretty new at this, so I'll explain how i've gotten in to this.
1. Bought a HTC tytn UK and I wanted it in dutch
2. Since I couldn't find an original rom i flashed it to the dutch rom from shap's (wich is actually great)
3. Then i did find an original rom but wasn't able to flash it so i used "HTC Hermes SIM & CID Unlock - v3a"
4. The original dutch rom works fine now, except when i go to device info
Rom version: empty
Rom date: empty
Radio version: empty
Protocol version: empty
CPU: 8 squars
speed: 6 squarsBe...
No imei number and so on.
Can someone please help me, maybe in the future when i try to sell the phone this must be ok.
Thx a lot to all xda developers here !!!
edit: original bootloader and ipl were: SPL-2.05 IPL-1.04 (maybe it has something to do with that?)
roeldm said:
Hey,
I'm pretty new at this, so I'll explain how i've gotten in to this.
1. Bought a HTC tytn UK and I wanted it in dutch
2. Since I couldn't find an original rom i flashed it to the dutch rom from shap's (wich is actually great)
3. Then i did find an original rom but wasn't able to flash it so i used "HTC Hermes SIM & CID Unlock - v3a"
4. The original dutch rom works fine now, except when i go to device info
Rom version: empty
Rom date: empty
Radio version: empty
Protocol version: empty
CPU: 8 squars
speed: 6 squarsBe...
No imei number and so on.
Can someone please help me, maybe in the future when i try to sell the phone this must be ok.
Thx a lot to all xda developers here !!!
edit: original bootloader and ipl were: SPL-2.05 IPL-1.04 (maybe it has something to do with that?)
Click to expand...
Click to collapse
1) you need to flash HardSPL
2) make sure you have flashed a new radio after using the CID/SIM unlocker, due to the fact that it downgrades it to a very old radio for it to work.
I had this issue when I tried a version of HTC Home Customizer that I found somewhere on the net.
To make it all come back, I had to hard reset, and not reinstall the program that caused it. I'm not sure if any other programs could cause that issue, or why it was caused.
I've flashed my device to HardSPL. now wich radio rom should I use?
I've found several radio rom but I don't have a clue wich one is best for me (Belgium, Mobistar)
flash a shipped ROM from here, there is a dutch HTC from there. get to boot loader, pressing the ok on the left, power on right, and stick stylus in at the same time. plug it to active sync, and run the exe file from the WM 6 rom upgrade/downgrade.
Hi
my goal is to install WM6.5 on my HTC HD mobile, this mean to upgrade SPL + ROM (Miri WM 6.5 23017 :: V 26.3)
Currently i got the HTC HD with the next configuration
Rom version: 1.18.707.3 (23358)WWE
Radio version 1.09.25.14
protocol version 52.49a.25.26U
SPL-1.14.0000
BLAC100 32 m
After reading the posts, i understand that first i need to flash the SPL in order to support and flash the new ROMs.
1. Which one of the HSPL should i use HSPLWrapper_Blackstone_156OliNex.exe or i need to choose Unsigned_HardSPL_for_Blackstone_OliNex.zip
(Just to remind i am on 1.14 spl now)?
2. Whether i can go directly from 1.14 SPL to 1.56 Olinex SPL ?
3. Why to install Olinex , because later i can flush any ROM on the device, is this correct ?
4. If something gone wrong and i want to return to my original configuration.
"0. be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!"
The stock SPL 114 is exist in the thread , but where i can get the stock OS and stock radio as written in your guide ?
Thank you for the assistance
So , today i found one qtek 9090. Still cute machine , but i would flash it if i can with some newer firmware. My question is hot to do that in case its my first touch to that OS . The current software version is
ROM version : 1.31.00 WWE
ROM date : 12.13.2004
Protocol version : 1337,38
ExtROM 1.31.139WWE
Is there any better way to use this device with other rom ?
Stefan Caromov said:
So , today i found one qtek 9090. Still cute machine , but i would flash it if i can with some newer firmware. My question is hot to do that in case its my first touch to that OS . The current software version is
ROM version : 1.31.00 WWE
ROM date : 12.13.2004
Protocol version : 1337,38
ExtROM 1.31.139WWE
Is there any better way to use this device with other rom ?
Click to expand...
Click to collapse
You can use one of my roms...
The problem is i read the tutorials how to flash but probably they arent correct, cus i didint understood nothing at all. May i ask for proper tutorial and needed programs to do that?