Does anyone have a problem with their wifi locking up their xda iis? I have bought a linksys router and am getting frequent lockups when using wifi. I am using the shipped O2 rom, thanks
I have no problem at all with Netgear router. Try changing the connection speed setting in the router to the "b" mode only. Hopefully this can solve your problem.
No problems here either I'm afraid. I'm using a Draytek Vigor 2600VG at home and at work there are two of us with XDA IIs using a Linksys BEFDSR41W wireless router and no problems there either.
Sorry! :-(
Try a hard reset (gulp!) and see if you still have problems (Without anything else installed that might be inteferring) otherwise might be a faulty unit perhaps.
--Neil
I second what xanth said, I had the problem where wifi would not turn on, so I hard reset and installed each software back individually the problem was Calligrapher 7.3 did not like being in Storage or Storage Card only in Main memory (go figure)
efjay said:
Does anyone have a problem with their wifi locking up their xda iis? I have bought a linksys router and am getting frequent lockups when using wifi. I am using the shipped O2 rom, thanks
Click to expand...
Click to collapse
I use the XDA IIs on a variety of wireless networks and experience problems with an alarming regularity. The most annoying is the fact that the top bar seems to loose functionality, when using wireless!!
I will actually add that I do seem to have problem with the "range" of WiFi.
I need to do more testing, but it doesn't seem to be more than 20m or so before have communication issues/timing out :-( Will have to find out what our walls are made of!!!
I have problems connecting sometimes. I regularly use three routers, Draytek, Buffalo and Belkin. The only time that it locks up is when using skype. The skype problem is a known issue with no cure.
Nigel
I am having a problem where my Siemens SX66 will loose connection to my Microsoft MN700 wireless AP on occasion. -It simply appears as if the Wifi radio shuts itself off.
Weird.....
Wifi has never worked for me. It simply doesn't work in the way nature intended.
The main problem (as far as I can tell) seems to be that it cannot get DNS or IP configuration settings from my router (Belkin 7630) automatically.
It can connect to my wireless network without any hassle, but that's about it. If I enter DNS and IP settings manually it works fine. But this is unworkable if you want to connect to another wireless network.
If I can't sort this out by next week I'm going to sell the unit on eBay. It's been nothing but a pain since I mistakenly bought it in December.
Wifi is a nightmare on this device! I'm going back to Nokia.
I am going to do a hard reset and test to see if i still get any freezes. Anyone know of any software i can use to backup my text messages?
WiFi
Hi guys,
Haven't had too many issues with WiFi over here - standard O2 Asia ROM (with the BT 3500 update).
I'm running a Netgear WG602 @ home with 64bit WEP and a Dlink AP2100 @ work with WPA-PSK. No connectivity problems at either location, both DHCP. It does however take a few minutes to connect, but this is on the odd occasion.
The only frustrating thing with the WiFi is that I have to soft-reset often to turn Wi-Fi on - any ideas? Hopefully O2 will fix this in the next ROM. Other than that, I've had the Nokia 9500, P900/800 and this is by far the best device for the power user.
Just me 2c!
Cheers
cK
Wifi is on all the time on my device, sometimes when I switch the device on while within range of an AP it does not connect. Often switching wifi off and then onn again causes it to connect. If this does not work then I can often go into the network dialogue section, and see the network marked as 'availble' but not connected (why it sometimes does not auto connect I dont know). Tapping connect usually cures. If that does not work then I too need to soft reset.
I hope like you that they fix this cause its damned anoying. I will be interested to see what the Benq P50 is like when its released. I shall get one from expansys to test and ship it back within the 7 days.
Nigel
As for those having problems with specific access points. It is not nessesarily the fault of the blue angel. It seems to me that none of the manufacturers of wireless kit understand the term 'standard' they all seem to have their own take on it, which is why kit from different manufacturers refuses to talk to each other. I am of the opinion that they do it in purpose to lock you into using their client cards with their AP's !!
Try it with some non Belkin kit and see what happens.
Nigel
Well i tried a hard reset and didnt install any apps and tried connecting to wifi again and still got a lockup and loss of connectivity. Im going to swap the router for another make and see what happens
Swapped my linksys router for a D-Link and so far no problems after 2 days. so looks like my problem was my router.
Swapped my linksys router for a D-Link and so far no problems after 2 days. so looks like my problem was my router.
XDA IIi and wifi
I just bought one of these and can't get it connected. I have a netgear wg602 access point. When I finally figured out how to set the IP manually (the 02 xda tech support said it can't be done - maybe they're right ;-)
I now have it saying it's connected, with right IP address. My DNS and gateway are set up for the wireless adapter in network adapters. The signal is average. The XDA says wifi is connected. The access point even says it's authenticated and associated - same as my other stations.
Only problem is, internet explorer doesn't find any web pages - says "The page you are looking for cannot be found" (works fine through GPRS)
Also, terminal services times out trying to connect to an internal IP address (to eliminate DNS as a problem)
So, anyone know how I troubleshoot network problems - it looks like a TCP/IP issue? Can't find ping or arp etc. I've also tried an IP address that I know works on the network.
thanks for any help
Dave
Hi
For ping, ipconfig and stuff, head to http://www.cam.com/windowsce.html
I have had multiple issues trying to get wifi working reliably. It still fails now, but there are a few tricks to get it working again. Most of my wifi issues have been due to regular use of three AP's [email protected] and [email protected] along with GPRS and VPN.
To start with I suggest setting all the ****e in connections (internet and home network to 'My ISP' then goto your wifi setup, network adapters, and tell it that the wireless card connects to the internet. Now, tap ok, and goto tools, network cards, tap the active connection (it must already be connected) and ensure that its set to internet.
Next soft reset the thing, and wait for it to connect to yr wifi. Now, use the ipconfig tool and ping tool from the above site to check that all is OK. Check that its got the default gateway right and a sensible LAN IP.
I have found on occasion that I can be connected via wifi, but that the device is still trying to talk using an old IP allocated by gprs which means nothing to my lan! IPconfig will show if all is OK.
Whoever wrote the whole of the networking system (and its terrible gui's) on windows mobile wants shooting. I usually have 2 VPN profiles setup under my work network. If I leave it set to that, and use wifi from my lan to connect to the internet all is fine. However if I try and access a local server, the damned thing starts trying to connect a vpn (it aint inteligent enough to work out that the IP I asked it to connect to is local).
I have been trying to find a setting for all this networking rubbish that allows me to do *everything* without reconfiguring each time - to no avail.
Another thing to note is that you cant send/receive MMS messages while wifi is connected (more stupidity), it tries to connect to the MMS server using the wifi connection, and the telco blocks it cause it wants to charge you for sending MMS over GPRS. Only solution is to disconnect wifi, send MMS then reconnect wifi!!!
Nigel
No problems with WiFi for me
Hmm I'm using an O2 Asia Rom as well.. and my wifi manager seems to automatically create "settings" for each AP it detects and I seem to have no problems connecting at all... been using WiFi around my house since the first day i got it..
i am using a Linksys Wireless 802.11b router..
btw I am new here.. finally able to register!
How's everybody doing?
Cannot turn off IEEE 802.1x
Has anyone had problems unchecking the 'IEEE 802.1x netwrok access control' checkbox???
I uncheck it, but then when I go back to the screen (click on the connection | then select 802.1x tab at the bottom) it has checked itself again!
The XDA IIs does not save the setting - it just keeps re checking itself 02 help have been no use - they sent me an instruction manual and it even says in one of the step 'uncheck IEEE check box'
Im am using a netgear wirelesss router and have also tried on a d-link
Sugestions - is anyone else having this problem??
Hi,
maybe something im missing here but i was at a friends house the other day and he has a wireless access point set up (open with no encrption set up yet ...just for testing purposes). so basically he is broadcasting his SSID. I turned my wifi on my m2000 and it picked up his access point and showed me that my phone had connected, with the WIFI signal enabled...however i could not browse or use the net which tells me that i was not picking up an IP address...wats going on here? any clues?
thanks for any help
K
kadabra said:
Hi,
maybe something im missing here but i was at a friends house the other day and he has a wireless access point set up (open with no encrption set up yet ...just for testing purposes). so basically he is broadcasting his SSID. I turned my wifi on my m2000 and it picked up his access point and showed me that my phone had connected, with the WIFI signal enabled...however i could not browse or use the net which tells me that i was not picking up an IP address...wats going on here? any clues?
thanks for any help
K
Click to expand...
Click to collapse
if the AP's DHCP sevice is off,you can't get the IP automatically
The DHCP is dodgy on my belkin router, so I have each PC and my BA set up to use a specific IP address, rather than rely on the iffy DHCP.
You may find you need to input a DNS if you do it this way.. just copy one off a working PC
Forgive me if I am talking utter c#$* but if you have established a connection have you not been allocated an IP via DCHP? Just taking a step back from router problems, when setting up the wireless connection did you set up for work or internet profile?
simjo, what you say is prefectly logical, but I have seen cases (as the thread poster was suggesting) where a connection has been created, but no IP addy issued. At these times, no internet access etc is possible. i.e. connection is said to be active, but it is useless.
My solution for this problem was as I posted above, dont bother with DHCP. Set IP addresses manually.
I have a similar problem on a new M2000 (so I'm probably overlooking something)
I can connect my PC and laptop to my router (D-Link 614) on WiFi without any problem
The M2000 can "see" the WiFi but there is no connection
When I try to view pages via GPRS there is no response
When I try MSN Messenger, same again there is no response
I've tried several soft and hard reboots, but no difference
I also find switching the "phone" on is very difficult as I am warned to "The phone is off. Do you want to turn Wireless on"
I then turn Flight Mode on, but am then warned that Orange GPRS cannot connect
I have managed to make some test phone calls, but the menus seem to be taking me round in circles...
Any advice welcome
My Best Roms - WIRELESS PROBLEMS FIXED!!
XDA IIs UK from O2 - WIRELESS PROBLEMS FIXED!!
1. Best ROM so far without doubt for me is the BA_TMNL_14200_119_11300_Ship from T-MOBILE
AND its the fastest ROM ive ever used!
2. Best ROM (slightly slower)
XDA 1.42 115 T-Mobile Firmware (uses Radio 1.13)
3. I-Mates 1.40 WWE with Radio 1.13
still had an issue with audio dropping from incoming calls
If you've seen any of my previous posts you'll see the hell i've been in trying to get anything to work with these ROMS, now it ALL works. and I dont say that lightly!
i tried the last 2 factory ROMS from O2 UK 140.237 & 140.242 which is there latest and I had WIFI nightmares with both of those..
I must have spent 30 hours swapping ROMs and this is the best Ive found so far now. Seamless Wireless Hookup everytime! I have Rude FM 88.2 Streaming Live through my Linksys Router at 64k 44khz using Pocket Music 3.2 , Surfing the Net, even the GPRS is stil enabled with the WIFI signal, a special lead pipes the audio to my Amplifier it's been on all day playing variouse stations, Windows Media Player streaming well, even download Skype over the XDA and installed it.
Hi All...
My 1st post,, a shame it is about a problem.
Anyway, after examining the 4 WM6 versions currently available I went for the Dutty upgrade.
I followed the Hermes guide to the letter, & EVERYTHING seems to have updated perfectly.
Including my radio firmware being 1.41 now.... WM6 seems to be running like a dream aw well.
However, when i go to connect to my local wifi router, despite it SEEING the ssid, & signal strength & saying it is available etc.... It even starts to initiate.... (my tytn picking up the SSID & channel num etc. ) But it fails to connect (i.e. getting an IP address) & throws up a timeout error.
BTW, my wifi zone has NO security applied to make it easy to connect to - ALL my home PC's etc are all connected & working fine.
Before i upgraded (older radio firmware & WM5) the tytn DID connect.
Strangely enough - Sitting in another room, my Tytn can find another open Wifi router from my neighbour - who also has no security.... when i select this router - the Tytn DOES CONNECT!!! - & I can brouse the net via HIT Wifi - So it does work?????
So what could it be? - something to do with the radio firmware? WM6 maybe? or something subtle with my router settings that didn't pose a problem before, but do now??? - My Router is a D-Link DI-524 - And has been perfect & trouble free for all devices connecting to it for nearly a year.
Anyone have any ideas?
Cheers
Hype
Reset the D-Link, I had A D-Link and had simmilar problems with my notebooks, a simple reset of both devices would solve the problem, I now use a NetGear 802.11g router with no problems ever.
Interestingly, I've just downgraded the Radio Firmware from the 1.41 to 1.40 & It does now want to connect... but still a bit hit & miss.....
As i said above, before any of the upgrades, the Wifi DID work & connect quickly... so this is suggesting that it is the newer Radio Roms that is causing the incompatibility.
Dutty's WM6 is FAB!! - I recommend it highly - In fact more so than the Black 2.5!!!
Hype
Find out what channel and frequency youre neigbours router is and switch youre D-Link to those specs. Basiclly try conecting youre device to it and monitor what channel and frequency it connects to.
I've upgraded my TyTn to WM6 using the new repackaged rom from Mrvanx, however I have a weird problem with the wifi.
It cannot see my router whereas before I upgraded there was always a strong signal.
I have set up the WPA encryption key etc. and also set the router up without encryption but it just shows unavailable in the list.
A neighbours network which is also WPA is found OK and it connects and asks for a key.
My laptop is connecting OK to the router so I assume all is OK with the router.
No mac filtering or anything like that installed in the router.
Noticed unlike old wm 5 the wifi Icon only stays active for about 20 secs even though in comms manager the WIFI icon shows it switched on?
Anyone got an idea what might be the problem. I do like the ROM but I do need my wifi on trips and I need to travel soon again so hoping I can fix this.
Al
ROM 3.54,707.3 repackaged
Radio 1.03.03.10
WIfi Woes - part success - update
OK I found the answer but created another question ;-)
For security I turn off the SSID broadcast on my router. I turned it on and the TyTn immediately connected.
I always had a good connection on my original WM 5 ROM without SSID, but it appears the new one will not even see the network without SSID broadcasts.
Are there any other settings in the device to allow it to work without SSID because I am thinking that maybe some free WIFI accespoints have it turned off too?
Al
Im having problem connecting to my home network...my o2 detects the network..signal strength is good but when i try to connect it..it shows connecting in the network cards but after a few secs shows available..ive tried to connect it hunderd times but still it shows connecting for a few secs and becomes available again.. Network settings are okay..as all other devices connect properly so there is some other problem i think..
my router is Dlinke DI-524
O2 rom version 6.11.00.WWE
Radio Version 1.06.00
protocol version 1337.38
extrom version xplod_7.00
Finally after many days..i figured it out.... Firstly i did a hard reset on the router and then i moved the battery slider to max performance all the way to the left...and tadaa..it connected like a charm