I have an AT&T Siemens SX56. I used the XDA-developers Special Edition ROM v1.2 to get my SIM Lock disabled. I have T-Mobile service and my T-Mobile SIM now works, hoooray!
However!, The version of Pocket PC on this ROM is not to my liking.
I went to siemens site and they offer the latest Windows Mobile 2003 for my device, however I can't use it becuase my ROM versions don't match.
IS there any way I can upgrade the latest Windows mobile 2003? What would be the recommended method?
My current SX56 info:
Rom Version: 3.17.03 ENG
Radio Version: A.33.02
Protocol Version: 1.3.3
Model No. says: PW10a1 (even though it says on the back PW10b1)
MS Pocket PC 3.0.12039 (build 11178)
Any help or advice would be appreciated. I scared to do anything for fear that using a ROM kitchen might toast my ROM
ANY advice on this would be greatly appreciated!!
Thanks,
Brock
the rear sticker is THE right one .. your device is B and it works on 900/1900 MHz.
As long you don't touch the RSU part and you are using the SD method for ROM flashing, there is almost nothing can go wrong for using the kitchen for ROM cooking. I can't remember how many times I flashed my ROM
You can get more details by reading through this forum carefully.
Good luck
Hmm... So what version of ROM on this ROM kitchen website would be most recommended: http://lumpistefan.dyndns.org/ ?
Also is there a reason why you are only allowed 3620kb of ROM space? I thought my device had 32MB?
All I would have to do is create the ROM on that site save it as a .exe and then it would do everything else?
Thank you for the quick reply!
I forgot to mention that I have the Wallaby Boot loader version 5.22, if that makes any difference.
I also was wondering if the newer radio versions make any difference on reception/clarity/availablity of a signal????
Another thing I was wondering about is... How come on this ROM kitchen website http://lumpistefan.dyndns.org/ I have to e-mail information and await instuctions to proceed? Does he have to give me a special number that is generated to make the ROM I downloaded work w/ my IMEI or device?? Or is that totally not right???
Thanks again,
Brock[/i]
hi, i am a newbiee...dont intend to stay that way though..
i need to unlock a tmobile pocket pc phone edition 2003 having the following info
Rom version: 4.01.16 ENG
Rom date: 02/04/04
Radio version: 6.25.02
prtocolversion: 324e4
i would also like suggestions as to how i can best unlock the phone (sid unlock).
thanks :!:
http://forum.xda-developers.com/viewtopic.php?t=12110
HTH
Stefan
programme A error
i tried to use the OSI image tool, but i got an error saying no proggramme A....
pls how do i get arround this?
i need this ASAP
Hi All
I am new to this forum, I would like some help if at all possible with an xda 1. It is locked to 02 and needs something called a sid code?, I have read some posts on this forum and they do offer ways to unlock the code. But as I am very new to computers and also ppc's I am finding it hard to understand what I need to do, if anyone could send me simple to follow step by step instructions for a computer dummy that would be great. From the forums that I have read I am very worried that I will make my ppc un-useable, wipe it clean or make it die totally. Can anyone offer any help at all.
Information that is on the xda 1,
Rom version: 3.17.03 ENG
Rom date: 05/15/03
Radio version: 4.20.00
Protocal Version: 32S54
Model No: PW10A1
Best regards, atmitch
Should be aesy in your case....
1. Download http://wiki.xda-developers.com/uploads/XDAunlock.exe
2. Copy file to your xda
3. Run the xdaunlock file on your xda.
This should be all to unlock it.....
Stefan
T-Mobile Pocket PC 2003
I have a US T-Mobile PPC 2003 and I cant use my UK T-Mobile sim card in it. I tried usind an O2 card but it asked me for an SID code, so I tried to use the XDAUnlock program but it just wont work? Does anyone have any ideas? I also tried using the Bandswitch program but that does not work either?
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz
Stefan
XDA unlock
Hi,
I tried the xdaunlock code on my xda and get the message 'error getting unlock code'
Model no PW10A1
Rom version 3.12.07 ENG
ROM date 08/13/03
Radio version 4.06
Protocol version 32S54
any help appreciated
Thanks,
Mogens
Ditto
Mine is teh exact smae model and it did the same thing... ANY help apprieictaed!!!
I have run the Xda Developers XDA11UNLOCK tool v1.2 it reads after opening the comm port The phone seems unlocked already ,but when i put a simm card in not O2 T-mobil etc it states ,network is locked ask's for code which i input 2040248 push ,ok,It then states incorrect code you have tried 2147467258 times,please wait until time out.HELP PLEASE in simple language as I am not that computor literate THANK YOU!!!!!!!!!! :roll:
rom version1.60.00wwe
ron date 12/03/03
radio version 1.10.00
protocol version 1337.18
extRom version 1.60.50
XDA II unlocking problem need help for reflashing
i have the same problem. me being so stupid paid GSM liberty 80 USD. and i am getting same message. we need help can somebody advise us what we are doing wrong.
Hi all,
I have been using this phone for a while now. Its been working very well till today. Today I tried to install some themes and they ended up occupying my full phone memory. So I did some googling and decided to do a hart reset as I didnt have any valuable software installed.
I went ahead with the Hard reset by clicking 'clear storage' and typing 1234
The phone rebooted and got my memory back and everything except that it not connecting to a network. any network.
I use the 2G version of Touch Diamond in India (GSM). It keeps saying cannot register to network. I've tried different networks with SIM cards which are working well with other mobiles and both manual and automatic network selections.
I have done SIM unlocking done in the street as soon as I got the phone, as this came packaged with Airtel. But now the phone is not registering with any network, including airtel.
My stats are
ROM : 1.93.720.2 WWE
Radio : 1.20.OliNex.
SPL 1.23-Hard
Q1 : Does that mean I have HardSPL already?
Q2 : Would re-installing my Radio solve the present problem.?
What should I be doing.
can someone please guide me. I am reading thru this forum and I dont see anyone reporting similar problems
Have you gone to start/ settings / connections "connection setup"?
Just tried doing it. I detected the settings for Vodafone which is my current network, restarted ,but it failed to register again.
The exact message was :
Network error :
Cannot register on selected network. Chose another network or disconnect data connection and try again.
I am pretty sure I have no data connection active
NAAAAAAAAAAH STOP !!!
Just enter Bootloader and write down everything you see !
Never heard of a DIAMOND 2g ? but if its an CDMA the following wouldnt apply !!!
What radio version do you have ?? 1.20 is you SPL ....
go bootloader mode (soft reset + vol down + powerbutton) and write down everything you see there ....
NOT FOR CDMA User!!!
here is the HARD SPL i recommend !
http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705
Then try flashing one of these RADIO roms:
http://forum.xda-developers.com/showthread.php?t=432770
Then do a Hard reset
Softreset + Vol down + Enter button (the round one)
Then follow on screen (you dont need formating MovieNAND - AFAIK vol up should do)
greets
Okai...
This is what my bootloader looks like
Security Unlocked
DIAM140 64M
SPL-1.23.Hard
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
and shows 'Serial' in the white space.
ROM Version : 1.93.720.2 WWE
ROM Date : 08/07/08
Radio Version : 1.20.OliNex
Protocol version : 52.26a.25.09G
I was waiting to flash my radio.
Is my ROM compatible with any HardSPL and any radio or Do I have to choose carefully..?
Okai...
This is what my bootloader looks like
Security Unlocked
DIAM140 64M
SPL-1.23.Hard
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
and shows 'Serial' in the white space.
ROM Version : 1.93.720.2 WWE
ROM Date : 08/07/08
Radio Version : 1.20.OliNex
Protocol version : 52.26a.25.09G
I was waiting to flash my radio.
Is my ROM compatible with any HardSPL and any radio or Do I have to choose carefully..?
And I am sure my Diamond is GSM
When its GSM then u can surely dump your radio rom from sticky thread on it !
Please no double threading !
just follow my short description
I have flashed my Radio to 1.00.25.05 and then to 1.00.25.07, but no luck so far. I am having the same exact issues as before.
What should I be doing, Please
Any more things I can do or should I be taking my 2 months old Diamond to the service center without a warranty ??
hmmm .. i would think its still any type of Sim lock in it, so i would try to contect cmonex / Olipro for a solution ! i think if you donate a bit they can help you with code unlocking.
Did u also Flashed another HardSPL ?
what does tri color bootloader promt out ?
I would try and Flash a new HardSPL Olipro's 1.40 is a good start rather than Jocky's 1.23 (shipped)
Then a ROM that includes a radio - perhaps DuttyThroys
Let us know how you get on...
Before you go to the shop - on the way you can always slap the man in the street that is using pirate unlocking software too - I hope you did not pay him.
links are in my signature (current...)
@Neutron,
This is what my bootloader looks like
Security Unlocked
DIAM140 64M
SPL-1.23.Hard
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
and shows 'Serial' in the white space.
ROM Version : 1.93.720.2 WWE
ROM Date : 08/07/08
Radio Version : 1.20.OliNex
Protocol version : 52.26a.25.09G
It is not SIM-Locked, I am sure of it.
@Windoze,
Mate, I was about to ask the same question..?
Since my Diamond is an India specific one (ie NO 3G, Only GSM, GPRS and EDGE), I thought of flashing the India specific ROM presently available on HTC's website which also includes radio 1.00.25.07.
so arise Q : Should I upgrade the HardSPL or shall I Flash the new ROM as it is with my 1.23 Hard..?
As its unlocked by code i would recommend you to flash a shipped rom !
Hard SPL 1.23 or 1.40..? Signed or unsigned if I am flashing the shipped ROM..?
Thanks and sorry for asking so many questions. Just anxious
if you flash your shipped rom it will be signed so no need to upgrade your spl.. dont know which u flash so i would say SPL also will be updated and you need to hardSPL after that... just give it a try ...
I am flashing the ROM with my Hard1.23 in an hour as the file is being downloaded from the HTC website. Will post results. Thanks.
FyreMasq said:
It is not SIM-Locked, I am sure of it.
Click to expand...
Click to collapse
I can see that by looking at the Radio version you had posted previously - I think this is the one which was part of a package leaked on the internet to unlock the Diamond.
Windoze9t8 said:
I can see that by looking at the Radio version you had posted previously - I think this is the one which was part of a package leaked on the internet to unlock the Diamond.
Click to expand...
Click to collapse
I was just stupid mate, I hadn't discovered this fantastic forum at that time
BTW : Congrats to me on flashing my first ROM. Went without a glitch.
Progress update :
I have flashed the shipped ROM and radio from the HTC website and still status quo. I am not able to connect to any network.
What should I be doing next?
FyreMasq said:
I was just stupid mate, I hadn't discovered this fantastic forum at that time
BTW : Congrats to me on flashing my first ROM. Went without a glitch.
Progress update :
I have flashed the shipped ROM and radio from the HTC website and still status quo. I am not able to connect to any network.
What should I be doing next?
Click to expand...
Click to collapse
as previous post - try 1.4 olipro HardSPL and a custom ROM from here