Related
Has any one managed to expose the extended rom on the XDA2i for custom instalation on boot.
Also Vodafone Instalation cab works fine on XDA2i with all functions working.
I'm trying to do the same thing - has anyone managed to expose the extended rom on the XDA2i?
It was dumped a long time ago. The 3900 build of Bluetooth drivers comes from there.
Qtek 2020i problem
hi mamaich
I have bought Qtek 2020i before 2 days, can you please direct me how to unlock my extended rom? I will be very thankful to you if you help me in this issue
note: I tried the extended rom unlocker that was prepared for Himalaya and the one for Blueangel too and didn't show even my extended rom folder after soft reseting.
Re: Qtek 2020i problem
I don' have 2020i, so I cannot help with extrom unlocking.
Is there an Extended Rom Unlock Utility for the 2i?
We are desparately in need of a way to unlock the extended ROM of the XDA2i. The reason for this is that our application--for whatever reason--is not compatible with the 3900 bluetooth build, but IS compatible with earlier builds such as that found on the XDA2s.
If it is true that the ROM has been unlocked to gain the 3900 bluetooth build--then can someone please post a link to the way in which this was done and any utilities or software used to do it?!
Re: Is there an Extended Rom Unlock Utility for the 2i?
You can manually edit extended ROM image (NBF file) with extended ROM editor tool (I'don't remember its exact name, look into WiKi), delete CAB file and reflash. But I don't think that downgrading to build 3501 would help. You'd better fix your app.
I've tried this, used ER2003Edit_1_4_26. I have the nbf but it is telling me I can't open them because the password is incorrect. I have looked around quite a bit for a solution but have found none.
Is there a password which will allow one to gain entry to (ie edit and repackage) such that I can truly update the extended ROM of an XDA2i?
ERROR, ERROR ERROR
Sorry for my english
Since April i search a way to edit ExtRom on Qtek 2020i, but it seems that is to complicate for developers.
Status at this day
1) You can see extrom and by this way copy and save cab on other place. To do that you must reset just after steep 1 of hard reset and use your explorer. Other way, with your explorer, go to windows folder and simply run LoadVDisk.exe
2) You can't write into ExtRom
3) You can't edit rom with actuals tools (ER Edit, Dump ....). Passwords is unknow and i think memory adresses are differents
4) Also If you can't write in your Storage, because looked after used differents tools proposed by many peoples who know, to unlock your Extrom, flashing rom do not return Storage in normal status. It's my case and somebody with apparent good intention, but totaly incompetent, can you push to make an fatal error, thank's to all.
I'm am ungry when i read some absurbity (exemple in this forum). When we don't know, we must no speak
so is it impossible now to get the Srorage folder as before, I have this problem now in my 2020i, I cannot write into Storage HELPPPPPPPPP
It's exactly tha i said
DON'T USE FOR MOMENT ANY EXISTANT TOOLS TO UNLOK QTEK 2020I
Any progress in unlocking the extended ROM on XDA 2i anyone?
if somebody can povide me with valid source code I may try converting it for xdaIIi, I have one source now but missing some header files which I couldnt find like Pwinuser.h
I have free time these days, and I am sure that we have many good people here but maybe we need more effort, so let us share our experience on what we found so far, and try to solve this problem ASAP, what makes me more angrey these days is the Storage which also cannot be unlocked back...
so common guys, let's rock it out!
Hi
About storage i have unlocked mine. This lock Storage was appear after trying to unlock Extrom. Pls read this
http://forum.xda-developers.com/viewtopic.php?t=23154&highlight=
For me Storage locked is finish with this simple action.
For Extrom what header do you need ?
I put here registry and files extract from 2020i about Extrom that is nammed VDISK and use VDISK.dll. We can see ExtRom without reset to run LoadVdisk.lnk or .exe directly
I have also original installation of French ROM 1.11.02, Extended 1.11.115 and Radio 1.02 FRE.
Thank's for your support
I need the C header file not the registry information, read my reply to your post about the Storage, I explained there how does these things work out, at least for the 2020i a far as I could find out, if there is anyone on this forum who can add something or correct me, that would be nice, because we want all to work together to solve this problem ASAP.
I am now trying to find out the functions indside the dll file and find out how do they work, then I will try the password that is provided in this forum to unlock the extended rom. what happens to the Storage is that the old program has 2 parts: lock and unlock, when we tried to unlock, nothing happened because the password and device type was wrong, and when we tried to lock, the code didnt check the device name niether the password and directly locked the diskonchip drive which is in our case the Storage folder. I read the source code and this is what I understood, so I am trying to modify it to unlock one of these folders, and since it was not put completely on the FTP (missing header files) I couldnt compile the code!
EMU, i write respons about Storage in http://forum.xda-developers.com/viewtopic.php?t=23154&highlight=
Let me know if it's ok for you
Désolate for header file, i don't have it
I have an XDA2i. Is there any way I can provide the header files you're talking about? If so, please provide detailed instructions for how I would do it.
Hi Guys,
there is already a new version of ER2003Edit (not published yet!!!) which can open .nbf files of Qtek 2020i. The only problem is with checksum calculation. I am using Itsme's Perl script, but it has a problem calculating the checksum and he didn't have time to fix it yet.
Anyone else...?
Hi EMU
What are the status of your trying to unlol Extrom. Can we help you ?
softworkz said:
Hi Guys,
there is already a new version of ER2003Edit (not published yet!!!) which can open .nbf files of Qtek 2020i. The only problem is with checksum calculation. I am using Itsme's Perl script, but it has a problem calculating the checksum and he didn't have time to fix it yet.
Anyone else...?
Click to expand...
Click to collapse
PLs if it has been updated then let us know we are eagerly waiting for it.
thx a lot
jeet
Hello, i will receive in few days an MDA Pro.
I'm French, and first, i will flash the device with a WWE ROM.
But after, when it will be available, i think i'm going to flash it with a French ROM.
My question is: how remap the physical keyboard ?
I think the keyboard will be a QWERTZ mapping.
But if i flash with a WWE ROM or a French ROM, the physical keyboard will not be mapped correctly.
I've seen the tip for the Qtek 9090 (i'm a 9090 Owner), it was a key in the registry to modify, and it was ok.
but, what is the procedure for the HTC Universal ?
Thanks a lot !!!
ok i've found the answer myself, sorry for the mistake...
@deathknight - please share your knowledge, i want to do the same!
best regards, lutz
Change Keyboard mapping
maybe this will help you
http://forum.xda-developers.com/viewtopic.php?t=29354
Wolfgang
hahaha, great, it worked. now my mda pro is a i-mate jasjar
thank you for pointing me the right direction.
cheers, lutz
thank you lutz ! it was what i found yesterday
Ctrl & Alt
Hi! does anybody know a way to change the functions of the mail button and/or the t-zones button on the mda pro to CTRL and ALT?
Brazilian Portuguese Keyboard
Anyone know what's the registry code for Brazilian Keyboard? Portuguese will to too. Thanks.
Spanish keyboard
And the registry for the Spanish layout?
Let's see if we can resuscitate this threat.
Would be a good idea to post the diferent registry settings for the different languajes.
how did you fix this?
I found it somewhere in the net (may be buzz developers)
Spanish layout code:
Registry\LOCAL_MACHINE\Software\OEM\Qwerty
And the value should be: 68617
Now I only have access to my UNI. Somewhere in my desktop I have codes for other layouts too; I'll post them when I find them again.
just have to change that registry key?
cRaZyzMaN said:
just have to change that registry key?
Click to expand...
Click to collapse
yes it exactly is ...
i don't have that reg key, what can i do?
---------------2006/May31 Updated---------------------------------------
------------------------------------------------------------------------------
@繁体字OS
Traditional Chinese ROM <QTEK 130 AKU2 + A2DP +Push Mail ROM>
ftp://[email protected]/Universal/DarkForce_CHS130.rar
@簡体字OS
Simplized Chinese ROM <QTEK 130 AKU2 + A2DP +Push Mail ROM>
ftp://[email protected]/Universal/DarkForce_CHT_130.rar
PLS use Extrom files which are in above archives to run correctly
See the detaile on next page and use as your own risk!
----------------------------------------------------------------------------
----------------Previouse POST-----No More following ROM----------
it took 2 hours to upload!!!!
http://www.asukal.jp/123/imate13_CHT.rar__65MB
Traditional Chinese130764 Universal
@Upgrade_Utililty.zip
*nk.nbf was my edited ROM of i-mate "JASJAR_WWE_13076_164_10900_wwe_ship" with
the wince.nls and Tarisk Font, enable to encode Japanese/S&T Chinese/Korean/Thailand.
(80% of its interface is Traditional Chinese)
*Radio.nbf and ms_.nbf are not included. pls dl offical one to flash.
*use MaUpgradeUt_noID.exe to make Falsh the ROM.
suggest to connect PC with "Sireal mode" = Light button + Power button +Stylus.
------------------------------------------------------------------
***The Templates.zip and Extrom_Unhider.cab---and Asukal.cab
@while first boot from Flasing ROM, some letters are not discribed correctly,
Such like a ????????. do not care.
@The Doctor Johnson screen to aline the stylus will be come every time after soft reset.
Please delete the short cut of "Welcome.exe" in the \windows\StartUp folder.
No more Dr,Johnson.
@using a Pocket Word, to make New Documents, you will find the error.
You make the "Templates" folder in My Documents with Chines Folder name.
The place the all templates in this archive.
No more error.
@Asukal.cab.==pls install this after finish 1st reboot from installation of Extended ROM files.
Then make soft reset again.
@Extrom_Unhider.cab is to unhide the Extended ROM.
Old Unlocker is not work, just install this cab and make soft reset,
ExtROM will visuable and workable.
http://forum.xda-developers.com/viewtopic.php?p=240986&sid=9e9c8acfa34bb46c11688318be09adb4#240986
Thanks for Mr.sef
Still not perfect and sometimes hang up if you toggle the Today Plug-in.
Pls try as your won risk.
If you feel so bad coz of the OS is not stable, pls use without Asukal.cab.
Less Chinese Interface, but more stable.
or make disable the Device Lock on the Today Screen.
Good Luck
Thanks again for the great word....
Actually I prefer to use English OS interface with the ability to read chinese only.....(I think it should be easiler to build??)
But this one is ok as I didn't install your cab file.
Thanks a lot.
Cheers,
Thanks again , will try today
CJK+Thai wince.nls and font in New I-mate ROM1.3
this is the new one only wince.nls and font, also font registry.
http://www.asukal.jp/123/v13enROM_CJK.rar 65MB
radio.nbf and ms_.nbf for Extended ROM, are not included)
PLS try, so nice! i hope...
1st one i uploaded, if you use Asukal.cab, the more mui can work.
those mui were made from old WM5, so they are not match well with
new os.
for example, thres.dll, old version dll doesnt have "Device Lock",
But new thres.dll have it, so if you use Device Lock on Today, OS will hang up.
Many of dll are different from OLD WM5, i suggest this rom only use for
test.(but without using asukal.cab, not so bad)
Good luck!
The first one after flush look great but install Asukal.cab the today plugin
will be stop try to reset can't be done.
try to install Sino_SIP_No5.zip to hand write , don't work please advise ,
also Monster SIP can't use either , I will text tomorrow and give you freeback
the default chinese input method from dopod 900?
hi asukal,
can you include the chinese input method from dopod 900 to the wwe rom devices?
need it very much!
hanks
Parker
[email protected]
ya, i have found many difference in dll between previouse and new ROM.
so some of mui is not compartible.
i found after made this 1st rom
so i suggest do not use asukal.cab pls, or use 2nd rom.
now i making new mui with dll from new rom.
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
i am willing to get it for you!
but how?
can you tell me how to do it?
thanks!
Asukal said:
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
Click to expand...
Click to collapse
Asukal, Dopod files and Modules upload to universal upload folder -- Dopod_files.rar hope that you want
Dopod_files.rar
mwang said:
Asukal said:
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
Click to expand...
Click to collapse
Asukal, Dopod files and Modules upload to universal upload folder -- Dopod_files.rar hope that you want
Click to expand...
Click to collapse
Excuse me,Would you tell me how to use the Dopod files.rar?
thanks,
but Module and file....i guess those dumped files are dead PE Header.
i need dll with correct PE headers. OK i will dump chinese ROM by my self.
but
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Asukal said:
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Click to expand...
Click to collapse
Please pm to me how to get it ,I will doing tonight
Dumping chinese ROM
Asukal said:
thanks,
but Module and file....i guess those dumped files are dead PE Header.
i need dll with correct PE headers. OK i will dump chinese ROM by my self.
but
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Click to expand...
Click to collapse
That's a great message, I'm waiting your dumper,and tell me how to return to Universal.
Thanks
How to solve inputing Chinese?
How to solve inputing Chinese?
Ce-star or system itself
No SIP for chines in it now.
you must install your favorite SIP.
to get the registry, use TRE (Tascal registry editor and export registry on device,
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
T-Mobile English ROM Bluetooth StereoHead set Profile
Today, the new rom of T-Mobile WWEnglish ROM with A2DP was uploaded.
i injected wince.nls and fonts which can be supported CJK+Thai in that.
uploaded here<no Chinese SIP and Interface,Just encode & font support>
http://www.asukal.jp/123/T-Mobile_A2DP.rar 52MB with MaUpgradeutlity.exe
see the captured screen shots.
http://asukal.seesaa.net/article/14749754.html
<no radio.nbf and ms_nbf were included. you have to dl from
http://forum.xda-developers.com/viewtopic.php?p=246434#246434
or
UNI_TMUK_12032_120_10600_Ship.exe
ROM version 1.20 lower than i-mate 1.30_AKU2
Thanks a lot again. I want the A2DP!!!! Yeah.
mwang said:
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
Click to expand...
Click to collapse
ya, i got it.
but it is not sure it can work or not
must check all regostry one by one.
i tried in my passed, still not good result.
any way, pls wait with long sight!
now i must make many kinds of rom for Japanese guys,
also trying to Get A2DP to i-mate ROM(very low possiblety to get)
also make new mui interface for AUK2,
also have to have a dinner!
also have to ,,,,,,
mwang said:
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
Click to expand...
Click to collapse
i am checking all registry from you.
question, i have found following value.
Is the "HanWang" one of OS SIP, or 3rd parties one installed by you?
[HKEY_LOCAL_MACHINE\SOFTWARE\HanWang]
[HKEY_LOCAL_MACHINE\SOFTWARE\HanWang\HangWang Pen for WinCE]
"Study"="0"
"Sound on"="1"
"Screen segment"="1"
"Default input panel"="0"
"Ink speed"="10"
"Ink width"="1"
"Ink color"="0"
"Ink type"="2"
"Recognizer delay"="400"
"Recognizer range"="600E"
Wait for your rplay.
please help, thought i played too much with easytweak, tweak2k2...
and it seems that the skins of the soft kb, block and letter recognizer have disapeared.
let me explained, i can't see anymore the little icon for kb but if i click blindly where it should be and if i try to make a note, it tapes in the letter i tapped.
same thing for letter recognizer, i can see what i write but not its frame.
the only one witch is working is the phonepad and transcriber.
now i've hardreset the v1640 with 2 soft keys of the hard kb + 0 key.
soft reset just before ext rom stuff and pb remains!
could you help me?
radio 1.8 to 1.9 didn't help (tried even if its not related )
installed also black kb skin from buzzdev and soft reset but no more luck
rom 1.13.65.fre
radio 1.8.0
really anyoying,
tried to search through forum but nothing helpfull for me.
merci
Hi rip
Are you shure keyboard layout is not installed with extrom that you bypass?
See you :roll:
salut bonis
hum, in that case i don't know witch cab i should load.
here is the Extended_Rom of my device, anything you can see concerning kb?
MASD_UXC_FR.cab
Signed_SSD_BTUR_Patch_for_BT_Cannot_Initial.sa.cab
Autorun.exe
Signed_Connections_FRE.cab
MSD_CAB-Customization-VodaFRA-Universal-01-05-20Sept05.cab
MASD_Ringtone_FRA_reg_0727_signed.cab
MASD_CAB-Shortcut-Voda-19Aug05.cab
Signed_RemovedFav.cab
Signed_Discobutton8.sa.cab
Signed_pIE_About.cab
Signed_PortalDefault.cab
Signed_version.cab
Signed_VodaSFR_MNN.sa.cab
Signed_SSD_Shortcut_FRE.sa.cab
Signed_DisableSL.cab
Signed_eCall_vMail.sa.cab
Signed_AddFavorites_FR.cab
AutoRun.exe.040c.mui
cuTSK.exe
config.txt
Well,
Best you could do is installing one by one and check if the keyboard layout problem is already there...
You did a HR so, in that case, you can install the whole extended rom just to check. And then, you can HR again and re-install only apps you want...
done
installed all ext_rom and no more luck, still having "kb skin" pb...
please close
upgraded to lastest imate rom; being stuck in bootloader mode for alomost 3 hours/ 10 hard reset...
finally flashed ok and my kb is back
Hi all
First post here.
We have a requirement and work to set a password on qtek 9100 then hide/disable the icon so that users cannot turn off the password.
Does anyone have any ideas if this can be done via a registry hack??
Thanks in advance