[help] soft keyboard disapeared! - JASJAR, XDA Exec, MDA Pro Software Upgrading

please help, thought i played too much with easytweak, tweak2k2...
and it seems that the skins of the soft kb, block and letter recognizer have disapeared.
let me explained, i can't see anymore the little icon for kb but if i click blindly where it should be and if i try to make a note, it tapes in the letter i tapped.
same thing for letter recognizer, i can see what i write but not its frame.
the only one witch is working is the phonepad and transcriber.
now i've hardreset the v1640 with 2 soft keys of the hard kb + 0 key.
soft reset just before ext rom stuff and pb remains!
could you help me?
radio 1.8 to 1.9 didn't help (tried even if its not related )
installed also black kb skin from buzzdev and soft reset but no more luck
rom 1.13.65.fre
radio 1.8.0
really anyoying,
tried to search through forum but nothing helpfull for me.
merci

Hi rip
Are you shure keyboard layout is not installed with extrom that you bypass?
See you :roll:

salut bonis
hum, in that case i don't know witch cab i should load.
here is the Extended_Rom of my device, anything you can see concerning kb?
MASD_UXC_FR.cab
Signed_SSD_BTUR_Patch_for_BT_Cannot_Initial.sa.cab
Autorun.exe
Signed_Connections_FRE.cab
MSD_CAB-Customization-VodaFRA-Universal-01-05-20Sept05.cab
MASD_Ringtone_FRA_reg_0727_signed.cab
MASD_CAB-Shortcut-Voda-19Aug05.cab
Signed_RemovedFav.cab
Signed_Discobutton8.sa.cab
Signed_pIE_About.cab
Signed_PortalDefault.cab
Signed_version.cab
Signed_VodaSFR_MNN.sa.cab
Signed_SSD_Shortcut_FRE.sa.cab
Signed_DisableSL.cab
Signed_eCall_vMail.sa.cab
Signed_AddFavorites_FR.cab
AutoRun.exe.040c.mui
cuTSK.exe
config.txt

Well,
Best you could do is installing one by one and check if the keyboard layout problem is already there...
You did a HR so, in that case, you can install the whole extended rom just to check. And then, you can HR again and re-install only apps you want...

done
installed all ext_rom and no more luck, still having "kb skin" pb...

please close
upgraded to lastest imate rom; being stuck in bootloader mode for alomost 3 hours/ 10 hard reset...
finally flashed ok and my kb is back

Related

Keyboard - please help on Scandinavian settings

Hep. Have been looking around the forum to find a way to change the keyboard layout (Hardware), to Danish.
I simply cant make it work. I have the Live 0.2 rom, and have tried the reg. editing as written in the forum..but no go.
Can someone please give a guide to which rom that I can use if I want a Danish Keyboard - or can someone do anything about the Keyboard issues. (Make some kind of a cab or??) I cannot do it myself, but would really be thankfull.
And - great thing with all this rom biz. I know nothing about it - but loves to jazz up my phone...hehehe
Greatings from Viking Land
Isnt that avalible in the extrom?
stinger32 said:
Isnt that avalible in the extrom?
Click to expand...
Click to collapse
I dont know??
I'm using LVSW version and somehow every softreset reverts \oem\qwerty registry back to uk mapping, manual edit and/or nordic keymapping.cab is useless, it have to be something with LVSW version, because xda live was working with nordic cab...
kha said:
I'm using LVSW version and somehow every softreset reverts \oem\qwerty registry back to uk mapping, manual edit and/or nordic keymapping.cab is useless, it have to be something with LVSW version, because xda live was working with nordic cab...
Click to expand...
Click to collapse
I have tried to change the registry, but i does not seem to do anything for me. I wonder if the settings somehow can be extracted from wm5?
Look at this post Norwegian Keyboard on WM 6?, it has the cab file for the keyboard attached, this is used for all nordic tytn.
I've just installed xdalive keyboard fix cab-> softreset -> nordic keymap cab -> softreset and now the mapping is correct!
kha said:
I've just installed xdalive keyboard fix cab-> softreset -> nordic keymap cab -> softreset and now the mapping is correct!
Click to expand...
Click to collapse
HAHAHAAAAA - its working. Yaaahuuuuuuu. Lets get som ROMs.... I cannot tell you how glad this made me..
TyTn Rules - The King Of Phones
Go Chefs, Go - lets get som roooommmmsss
Where can I download xdalive keyboard fix cab and nordic keymap cab?
callahan said:
Where can I download xdalive keyboard fix cab and nordic keymap cab?
Click to expand...
Click to collapse
I am wondering the same thing, have tried to search the forum with no luck
are there some who got the xdalive keyboard fix cab and nordic keymap cab?
when you guys find all the solutions to the mapping add them to the wiki, or pm me the list of fixes all nice and neat and i will put them on there
This works on XDA-Live & Black (at least)
Here's the one I use and it works on most of them anyways. Remember to soft reset afterwards.
Whenever I flash a new ROM or do a hard reset I just change the following ONE registry setting.
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty]
"Layout"=132116
Why not make a fix_my_qwerty_mapping.reg file and save this on your storage card, content like this (I have no idea how to make a .cab file, but this works fine for me):
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty\]
"Layout"=dword:20414
This is the Norwegian settings, but it doesn't matter for Finnish, Swedish and Danish users - it's all the same mapping. I got a TyTN/Herm 200 and for all I know this could be firmware dependent.
The number "132116" is decimal and found by:
20+countrycode, country code for Norway: 0414. That will be 20414. Converting this hex to dec gives 132116.
(When using the .reg file it writes in hex and therefore 20414, but you can manually enter the number directly into the register using hex if you like.)
Country codes:
http://www.microsoft.com/globaldev/reference/winxp/xp-lcid.mspx
Remember to power down/up after applying this registry change - not just a stylus soft reset.
shadoefrizon said:
Here's the one I use and it works on most of them anyways. Remember to soft reset afterwards.
Click to expand...
Click to collapse
Thanks man it worked on my HTC TyTn. No im typing in swedish
How do i get the æøå maped to a key so i don't need to go in to sym?
Shauge said:
How do i get the æøå maped to a key so i don't need to go in to sym?
Click to expand...
Click to collapse
You have of course searched, found og tried:
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty]
"Layout"="132116"
So then I dont know....
http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry
after running the cab file in this forum my h button is now a + when i am in contackts searching for a person?
Hi fellow Scandinavians.
Try these attached files.
They work perfectly in both WM5 and WM6.
Both should be installed on the device at the same time.
thx Torben schould i do a reset first now that the other things are ****ed up?
and how will i get the æøå maped to a key?

[release] WM6 Black Pro v3.0.1-CCS WWE Asia Edition [CHT/CHS/JPN]

Hi All,
First of all, credit goes to the original ROM author - jasjamming
Based on the Black v3.0.1, I have changed the following:
- Remove English SIPs (Letter Recognizer, Block Recognizer etc).
- Set Keyboard SIP as default.
- Included Windows CHT IME (M$ Phonetic & Chajei).
- Included Windows CHS IME (M$ PinYin).
- Included Windows JPN IME (M$ Kana & Romaji).
- Included PIM Backup v1.9.0.0
- Added CommManagerVibrateFix.
- Applied WM VI Black Update BT Drivers.cab.
- Added mingliu font, change wince.nls for Chinese/Japanese/Korean support (Korean need proper fonts).
- Added ClearTemp v0.9.2.4.
- Enabled NITZ time sync by default.
- HTC X-Button/Task Manager updated to v1.5.
- Replaced IA_Zip with PocketRAR v3.6 (freeware)
- Added VistaHide Battery Bar.
- Added SIP_CHT, SIP_CHS, SIP_JPN cab files for change SIPs (located in \Windows\)
- Replaced built-in MobileCalculator to Eval.
- Upgraded Office to 2007 version. (support docx, xlsx, pptx etc)
I've also included 3 cab file in the \Windows folder -- SIP_CHT.cab SIP_CHS.cab SIP_JPN.cab
Please remember to install one of the cab file to enable the inputs (soft reset after installation), otherwise only english input is available.
For additional programs (eg, VOIP, MSN Messenger), please visit the original black thread.
For chinese description or screenshots, please visit:
http://blog.yam.com/leo2016/article/10104618
Download:
http://www.sharebig.com/d/spxowmtll/0t9cFGM464C682B0E/Black_v3.0.1-CCS.zip.htm
(password: [email protected])
or
http://www.megaupload.com/?d=OAF20XT6
great thanks
looking forward to try this one out! thanks!
Thanks a lot for this new rom release
Any Traditional Chinese Handwrite Input function?
Thanks
As Ricky said, i would also like to thank jasjamming first...
now..
THANK YOU THANK YOU THANK YOU Ricky. Your solution is the only one that works stably for reading chinese... again, thank you very much!
Hi Ricky
I just installed the rom, and I notice that the font size is funny. The default size for the menu item does not change even if i change it in the screen adjustment screen (Settings-> system -> Screen). This does not happen with your old rom...
Thanks!
Slider
HKFreak:
Sorry that I did not include any of the handwriting software this time, I was trying to create a cab file for the Handwriting, however, everytime I installed the cab file I made the touchscreen would stop function (need to use hard reset to fix).
I'll find a solution later on... (oh well... maybe it's time to try 3rd party inputs )
Slider5354:
Hi, I realised this problem too, it is due to a reg key for chinese to enable "line break" (not sure if you have seen this problem on the previous version or not), if you use PIE to visit chinese/japanese websites, the text would not break into lines properly.
Once I added change the reg key the line break problem solved.
what you can do is change the reg key back to english one, use the RegEdit problem in System, find the key called "SystemLCID", change the value from 404 to 409 and do a soft reset, should fix your problem
X01HT Installed and Working Well!
Well done Ricky, awesome job. I found the Japanese input pretty painful, as it didn't have the correct romaji option, instead the layout for a true Japanese keyboard, which the X01HT doesn't have.
I used Asukal's one (tried to upload, but no go) and that is exactly as it should be. You might look at replacing your's with that one.
I will let you know how it goes as I run it through its paces, but its looking impressive so far.
Now where's the Black 3.5 version
Thanks, got it!!
Sorry, got it, thanks
thanks to you and the original rom chef jj. would like to know is 簡易 input method included?
RickyLan said:
HKFreak:
Sorry that I did not include any of the handwriting software this time, I was trying to create a cab file for the Handwriting, however, everytime I installed the cab file I made the touchscreen would stop function (need to use hard reset to fix).
I'll find a solution later on... (oh well... maybe it's time to try 3rd party inputs )
Slider5354:
Hi, I realised this problem too, it is due to a reg key for chinese to enable "line break" (not sure if you have seen this problem on the previous version or not), if you use PIE to visit chinese/japanese websites, the text would not break into lines properly.
Once I added change the reg key the line break problem solved.
what you can do is change the reg key back to english one, use the RegEdit problem in System, find the key called "SystemLCID", change the value from 404 to 409 and do a soft reset, should fix your problem
Click to expand...
Click to collapse
Mind if you post the cab file here? I need the CHT hand writing indeeded!!!~
RickyLan said:
Slider5354:
Hi, I realised this problem too, it is due to a reg key for chinese to enable "line break" (not sure if you have seen this problem on the previous version or not), if you use PIE to visit chinese/japanese websites, the text would not break into lines properly.
Once I added change the reg key the line break problem solved.
what you can do is change the reg key back to english one, use the RegEdit problem in System, find the key called "SystemLCID", change the value from 404 to 409 and do a soft reset, should fix your problem
Click to expand...
Click to collapse
Thanks Ricky.. I notice text break problem too, and this happens even with regular English rom + CE-Star.. so I guess we can only choose no line breaks, or weird font size... :-\
I've been runing the ROM ever since it went up and haven't had to do a reset yet, whereas with the straight Black 3.01 with the hacks to get it using Japanese, I found myself resetting 5 or more times a day.
Thanks for a great stable release!
Is this rom built up from black 3.0 insted of 3.01?????
I found the Black 3.0 bug still on this ROM....
1) today theme cannot be changed(only Top/Under Bar can be changed)
2) symbol pad cannot be loaded.
how to use korean
I want use korea.
how can i use korea language.
The Voice Command button also disabled. Any idea how to enable it?
And is it possible to set the default input from '拼' to English? (For both keyboard and soft keypad) Thanks!
Ricky, can you post the Japanese SIP cab file on its own?
I'm trying to muck around with Black 3.5. and the Asukal one I've been using up until now doesn't want to work properly.
flashed this no prob. used it to replace 3des + CE Star, which was a very unstable combination.
this is working great. fine job Ricky, and also to whoever did black. Nice ROM. I love my phone again.
anyone know where there is a manual on the input methods. they take some getting used to after CEStar, a manual would help.
hamster0914 said:
Ricky, can you post the Japanese SIP cab file on its own?
I'm trying to muck around with Black 3.5. and the Asukal one I've been using up until now doesn't want to work properly.
Click to expand...
Click to collapse
Really , just can't enable kansaku & tegaki. On 3.5 & all the new released roms.
Yes. All versions > 2.5 seemed not support SIP switching.
I guess some REGISTRY changed.
I switched to LVSW two weeks ago.
It works great!
Cedricguo said:
Really , just can't enable kansaku & tegaki. On 3.5 & all the new released roms.
Click to expand...
Click to collapse

Chinese IME for HTC s620 wm6 ROM

I flashed my C720W with S620 and Roger's English ROM which built in with XT9. I manage to install Chinese font to view webpages and messages with Chinese. However I did not find a good way to input Chinese. All I need is a STROKE IME for Traditional Chinese.
1) I cannot found Xt9 Chinese
2) I tried to extract some files from the asia ROM for Keytouch IME, but failed to manage the registry setting and cannot make it work.
3) I tried to install CE-Star Smartphone 2.8, it does not work!!
4) I tried to install Plum IME (PlumSIP5_SP1), I can type Chinese with the number keys, but the key mapping is not for my QWERT keyboard.
Anyone have a solution?
CE-Sta smartphone 2.8 is the only choice.
seu2002,
which ce-star version? i installed the trial from splife.com. i see the chinese letter "centre" on the bar, but i don't know how to change the ime.
I cannot switch to Chinese IME in CE-star. When I press FN-SPACE, it still pops up the XT9 IME menu. There is no option for a Chinese IME.
the newest version, that it 2.8R3a.
hold Fn when u press space to change between system T9 and CE-Star,
hold(long press) Fn to call the menu.
anything u don't understand, u can reply or PM me glad to find someone here who use chinese
when i press Fn+Space, it pops up the usual XT9 menu (small as the one before i install CE-star). the menu shows
1 XT9 English
2 ABC
3 Language ->
-> 1 French
-> 2 English
4 About XT9
I am using Roger's ROM.
sagementor said:
when i press Fn+Space, it pops up the usual XT9 menu (small as the one before i install CE-star). the menu shows
1 XT9 English
2 ABC
3 Language ->
-> 1 French
-> 2 English
4 About XT9
I am using Roger's ROM.
Click to expand...
Click to collapse
I'v no idea which version do u use, I recommend u test the latest version of ce-star which u can find on their website http://www.mobem.com
good luck
i cold-booted my phone, and installed the version downloaded from http://www.mobem.com. now i can read and type chinese. i think the chinese pack i was using is not compatiable with ce-star. anyway...
but now i have another problem. the ce-star works well after i freshly installed it. after a few restart, it creates a problem. i cannot read any SMS and email, the screen turns blank, and i cannot even type a new message. i am pretty sure it is caused by ce-star. my phone goes back to normal after i uninstall the ce-star. there is a post in another forum talking about the same problem.
http://www.pumb.org/viewthread.php?tid=31898&page=52#pid453639
have you got this experience? how did you solve it?
thank you!
sagementor said:
i cold-booted my phone, and installed the version downloaded from http://www.mobem.com. now i can read and type chinese. i think the chinese pack i was using is not compatiable with ce-star. anyway...
but now i have another problem. the ce-star works well after i freshly installed it. after a few restart, it creates a problem. i cannot read any SMS and email, the screen turns blank, and i cannot even type a new message. i am pretty sure it is caused by ce-star. my phone goes back to normal after i uninstall the ce-star. there is a post in another forum talking about the same problem.
http://www.pumb.org/viewthread.php?tid=31898&page=52#pid453639
have you got this experience? how did you solve it?
thank you!
Click to expand...
Click to collapse
Frankly speaking, ce-star is not that perfect, it has some annoying bugs
According to my experience, if u run some new soft or go to some menu that u haven't been to before, catastrophe may occur, which means ur device just freeze. Acctually, u needn't uninstall it, just reboot, if there is no response, just pull out battery and boot. Don't worry, it's OK. It'll be fine after u done this for some times
btw, I feel angry for paying $25 for that ****!!!
If I could buy a new device, I definitely will choose a PPC released in asia so as to get rid of that **** forever!!!
actually my phone was bought in HK with a Chinese ROM, I just wanted to upgraded it to WM6.
for the CE-Star, I solved the problem by removing the DynaNls.lnk from \windows\startup" folder, then manually run the CE-Star program.
Hi,mate. My phone is also come from HK with CSL 1010 brand
I have tried ur method before, it cannot get rid of the freeze bug. Just wait, it will happen some days later
Maybe tomorrow, who knows
MOD EDIT: Please use English as per rule 4. Google translate can help.
Code:
Try doing a clean install. I made it yesterday and I solved little problems similar to yours that had long been suffering.
Sent from the bottom with Antonio
Prueba a hacer una instalación limpia. Yo la hice ayer y se me solucionaron problemillas parecidos al tuyo que llevaba tiempo sufriendo.
Enviado desde el fondo del mar con Antonio

A guide for Brazilian people who wants to install WM6.1

First of all, let me say that so far, there is no Portuguese-Brazilian version of Wm6.1 for the HTC S-621 and maybe this will never exist at all…
If you are new to ROM Upgrading, you MUST read this! - PDF file - 2,5 mb + - (pages 1 to 11 only - keyboard issues are treated here)
That said, let´s cover the main issues you may have (at least the ones I faced) when upgrading to 6.1 for brazilian people.
Before we get started, let me tell you that I´ve tried all 4 flavors of roms available (so far) in this forum (in chronological order, i guess):
1 - Kavana
2 - Kavana remade by Rickwatt
3 - NGR Rose Rom
4 - NGR Rose Rom remade by Ricky and Stylez
And the best one that fits in my S621 (when you talk about funcionality and the little amount of trouble) is the second one (Kavana remade by Rickywatt) in this thread:
CLICK HERE to get Kavana remade by Rickywatt
With all other ROM´s i had some irritating issues, like CAP key nonresponding, comm manager not opening when you click on it, dialing “0” (zero) and getting TAB instead, typing “£” sign instead of “ç” and so on….
The very first change you MUST do is changing emergency number (911 does not work in Brazil – 190 does). All other changes but this one can be postponed, once you are dealing with life!
In order to do that:
Goto START – ALL PROGRAMS – MYTOOLS – REGISTRY EDITOR
Find these Regkeys:
HLM/Security/ECall
Scroll Down to LIST, press Center Button and change the “911” number to “190” (wich is the emergency call here in Brazil) – Confirm Change.
Find
HLM/Security/EcallWithoutSIM
Scroll Down to LIST, press Center Button and add “190” number. Press Done, Confirm change and repeat steps with:
HLM/Security/ECallWithSIM
Add “190” to it the same way.
DO NOT softreset the device yet (it´s necessary for changes to take effect)... there are other changes to do before softreset (Just to not waste time resetting it several times).
Needless to say that by doing this, you´re setting your phone to dial 190 (the emergency number here in Brazil – Remember, this guide is for brazilian people) even if keypad is locked.
______________________________________________________
Now let´s change some regional settings to best fit our needs here in Brazil.
Goto START – SETTINGS – CLOCK AND ALARM – DATE AND TIME.
Change TIME ZONE from London,Dublin (mine is at it – Who Knows why?) to GMT -3 Brasilia. At this point, you are able to change clock top to 24 hour format (I prefer) by changing values on CLOCK ON TOPBAR item (this step is optional)
Yet in settings, goto REGIONAL SETTINGS and change LOCALE to PORTUGUESE-BRAZIL. Press Done then OK.
Remember DO NOT soft reset yet.
Click done twice.
____________________________________________________
Let´s fix keyboard issues
Download Attached file to your PC to set up keyboard.
Is it done? Cool... now let´s do the trick: Goto START – ALL PROGRAMS – TEXT NOTES and click NEW to create a new one. DO NOT TYPE ANYTHING YET! Press FN + SPACE Keys to bring the language menu. Navigate to LANGUAGE (3) Choose PORTUGUESE (8). At this point, try typing a single letter, like the “a” character. You´ll notice that the XT9 dictionary will suggest you to use “a à á â ã” (for those out of Brazil, we use this special symbols very often). This is the predictive text working as it should be in all other ROM´s, but unfortunately, things are not as it were supposed to be.
Let´s go on...
Try pressing FN key and type the “J” letter... You´ll get an £ (Libra) sign instead. Type FN key again and type the “K” letter…. You´ll get an $ (Dollar) sign. It´s wrong… at least in my keypad, if you press “J”, “K” or “L” with FN, you should get the “ç”, “º” and “ª” signs.
Nevermind… let´s fix this…
Done with your annoying “ HEY! this is not the key i wanted to show up” thing? Ok. Now you can discard the note (press MENU button and choose CANCEL).
Remember the “eT9.Excalibur.0409.kmap.txt” file attached here? Did you got it? Put it in your mobile´s Windows folder, replacing the existing one. Your keyboard is fixed now, but do not test it yet, because it needs a reboot to apply changes.
________________________________________________________
NOW is the time for the first soft reset. Press IE key (this will bring Celetask) goto MENU – UTILITIES – REBOOT – confirm and wait.
Get back to text notes (START – ALL PROGRAMS – TEXT NOTES and click NEW to create a new one), and try typing something, like “jo”. You´ll notice that the XT9 Dictionary is giving you some options, like “jô jogo José jogos jogadores jornal”. It means the dictionary is working properly, as it should be in all other roms, but unfortunately, it only works in Kavana´s remade by Rickwatt. God knows why!
Now, try to type any vowel (a e i o u). Let´s take “e” for example. The XT9 give you some options like: “e é ê”. You see? Again, it´s the predictive text working as it SHOULD be in ALL other ROM´S...
Let´s try one last word... type “versao". It Will give you the option to use “versao versão”. (Just for your knowledge us-citizens, versão means version).
Ok? Done? Are we even? Now, let´s make it more confortable to use...
___________________________________________________________
Download Oxios Memory (it´s a “Hey, Free up my RAM” Utility – Needed, i mean it!) - http://www.oxios.com/memory/
Download Vieka Wordpad 2.9 - (Optional) - http://www.smartphone-freeware.com/get-vieka-wordpad-2-9.html
Download WiFi On/Off switcher - http://forum.xda-developers.com/showthread.php?p=3712420 - Really really (Really!!) useful app.
Download Youtube.cab - http://forum.xda-developers.com/attachment.php?attachmentid=180766&d=1240862360
Some will say: “Hey, there is a Free RAM utility already built into the ROM!” or “Hey, there is CELETASK that does this trick!”.
Ok... I agree... I totally agree and I surrender. Use it! You done? Now, go to main screen and try to go to Comm Manager... close it using celetask. Try to open it again…Could you? Me neither. It´s a very common and strange bug among alternative ROM´s.
Oxios memory does the trick without this issue!
Whenever you want to free up some RAM (and speeding up your smartphone as a consequence) use Oxios Memory (the icon is a skull with a black hat and a red stripe on top of the hat). It´s completely harmless and best of all – free and works!
That´s it… Rom developers, I hope you see this topic and try to help us here in Brazil by including at least the keyboard layout and the predictive text in your future rom´s.
I´m waiting for comments, thanks! I also hope to help other people in trouble, like I once was.
Sorry guys... i forgot to upload file...
Joeskull
Thank you very much!!
Very nice topic... it helps a lot.
I still have some troubles: how do you change the IE key to open internet explorer instead of celetask?
I'm using WM 6.1 by kavana but i don't think it was remade by anyone... i've downloaded you file but there is no portuguese option when i press fn + space. Do you have a any idea y?
And finally, have u downloaded any cab file to install the portuguese keyboard layout after installing your WM version?
Thanks in advance
lessafabio said:
Very nice topic... it helps a lot.
I still have some troubles: how do you change the IE key to open internet explorer instead of celetask?
I'm using WM 6.1 by kavana but i don't think it was remade by anyone... i've downloaded you file but there is no portuguese option when i press fn + space. Do you have a any idea y?
And finally, have u downloaded any cab file to install the portuguese keyboard layout after installing your WM version?
Thanks in advance
Click to expand...
Click to collapse
I don´t know how to change IE key to open IE, maybe some registry tweak, try search this forum... IE sucks a lot and I don´t care at all. Even when I was running the original WM6.0 from Vivo, I never used that key, so I really don´t care at all.
In the beginning of this thread, you may have noticed that there is a link to "KAVANA REMADE BY RICKYWATT" right on top of the post, so, it WAS remade by "anyone" (in this case, Rickywatt - Thanks, Rickywatt). Kavana was the first one, then came the others with improvements.
And as you may already know (because I assume you did read this thread entirely), this is the only ROM that I had no several issues with keyboard. All others were trouble and a pain in the * to fix keyboard. That´s why I gave up all others and stayed with Rickywatt.
If there is no portuguese option when you press fn + space, maybe it´s because it´s not Rickywatt´s ROM.
Please, download Rickywatt´s and try again the instructions I posted here. As I was making this guide, I was doing it in real time just to be sure it´s accurate. I did it three times in my device and three other times in different devices (I mean, the same HTC-S621 from different people). So, if you apply them step-by-step as I posted here, you´ll see things are gonna work properly.
And finally, I haven´t downloaded any CAB to make keyboard work properly. Almost everything was already built in Rickywatt´s ROM, I just made some adjustments in the TXT file posted here. As I said, install KAVANA REMADE BY RICKYWATT and follow my instructions here and you´re good to go.
Thanks
Hi buddy,
first: thanks for the tutorial!
second: I have a S60 BT, but I couldn't installed any rom. Every time I get a "corrupted rom" message. Have you ever seem this? I've read something that my phone could be blocked and that would be the reason.
I've tried to used that unlock from Rick, but didn't work. Do you have any more tip?
Thanks a lot man!
ademarizu said:
Hi buddy,
first: thanks for the tutorial!
second: I have a S60 BT, but I couldn't installed any rom. Every time I get a "corrupted rom" message. Have you ever seem this? I've read something that my phone could be blocked and that would be the reason.
I've tried to used that unlock from Rick, but didn't work. Do you have any more tip?
Thanks a lot man!
Click to expand...
Click to collapse
Try Google... Take a look @ this or this.
It's a very common error and easily fixed just by getting attention when upgrading ROM. There are SEVERAL topics about it. Use the search tool.
ademarizu said:
Hi buddy,
first: thanks for the tutorial!
second: I have a S60 BT, but I couldn't installed any rom. Every time I get a "corrupted rom" message. Have you ever seem this? I've read something that my phone could be blocked and that would be the reason.
I've tried to used that unlock from Rick, but didn't work. Do you have any more tip?
Thanks a lot man!
Click to expand...
Click to collapse
Might be a good idea to read the Sticky "Noobs Guide To Flashing"
All files needed and info are there
I tried to change de et9 file in Windows directory but in this version i'm using (wm 6.5 build 21848 nrgz evolution mod) there is some type of protection that prevents me from deleting/editing the file.
I attempted to change de read-only atribute but it doesn't changes.
Any ideas?
puace said:
I tried to change de et9 file in Windows directory but in this version i'm using (wm 6.5 build 21848 nrgz evolution mod) there is some type of protection that prevents me from deleting/editing the file.
I attempted to change de read-only atribute but it doesn't changes.
Any ideas?
Click to expand...
Click to collapse
First of all, copy the txt file anywhere on your device using your pc.
Now, in your device, use Resco Explorer to copy (and overwrite) this file in the Windows folder. Restart and you´re done.
Regards.
No one in Portugues Brasil yet?
Nenhuma versao 6.1 em portugues ainda?
We all brazilian guys here could ask these guys who do this modifieds roms how to translate or offer our help to translate something to our native language! If anyone here have contact with this guys and would like to help. I coud help!
Meu ingles nao é dos melhores mas dá pra ajudar!

[ROM] nAr & Icke WM6.5 [build 21874.5.0.83][WWE][FRA][DEU][ONLINE]

ROM DEVELOPMENT CONTINUED HERE
http://forum.xda-developers.com/showthread.php?t=661801
Hi Trinity community,
So it's the beginning of new releases !!!
- XIP 21874 SYS 21874
- 3 versions, Manila, Titanium & nUdE (for SPB users or other interface)
- Trinity Kernel (nk.exe) rev 3.03
- Scrolling IE8, but please give a try to Opera mini 4.2, it rocks with the Java engine included
As always:
- HardSPL must be installed _before installing this rOm_ !!
- We recommend using Olipro 1.2 and Radio 1.56.70.11, just follow points 1-3 of the newbies guide here:
http://forum.xda-developers.com/showthread.php?t=552757
- _Prior to upgrading_ copy "Cabs" folder and SDConfig.txt from _postinstall.rar_ to the root of your SD.
*Important:* Then remove the SD card from the slot.
- Put the device in bootloader mode by holding side CAMERA and POWER buttons together and reset with stylus,
then plug in USB and run RUU_upgrade.
- Just after 1st reboot when rOm version is shown, hard reset by holding the Left and Right SOFTKEY,
and at the same time press the RESET button at the bottom of your device.
Then press SEND and OK.
Read more about Trinity Resets here:
http://wiki.xda-developers.com/index.php?pagename=Trinity_Resets
- Then after hard reset, insert your SD quickly. It will install the cabs specified automatically at first boot
0407 (German)
Manila Version (update 08/01/10)
Titanium Version (update 06/01/10)
nUdE Version (added 08/01/10)
0409 (WWE)
nUdE Version (added 10/01/10)
Manila Version (added 10/01/10)
Titanium Version (added 10/01/10)
040C (FRA)
nUdE Version[/URL] (added 11/01/10)
Titanium Version[/URL] (added 11/01/10)
Manila Version[/URL] (added 11/01/10)
We like everyone to add requests and bug reports, to help us make a better rOm.
Please include your software version from Deviceinfo app, like manila_21874_GER.
Please, also include the additional softs you use, just in case.
nAr
SCREENS
Titanium version
Manila version
( -- to do -- )
Tips
"My phone seems slow as hell ... what happens with my hardware ??? and what about this rOm ??? "
The reason is, maybe you didn't correctly hard reset after 1st boot. Images bits of the previous rom may stay in RAM, and need to be cleared. I had it a few times by the past and it's real annoying. Or, remember to soft-reset the phone if you just used the PIM Backup utility to restore your Contacts or database. Either way it'll be effectively slow
"I can't have acces to sound volume settings, why? It's annoying !!! "
I'm really sorry for the inconvenience. The new Notification_Enhancement comes from Mega builds, where you can find the HTC_volume_control. Unfortunately it won't work on Trin correctly because hardware buttons are different. On purpose, I put Marc Landis's excellent SetVolume in rom. You can then set hardware button to do the job. Go to Settings - Personal - Buttons and choose "SetVolume" in the list for Button 1 and validate. This way, acces to Volume control is restored by hardware key just below Power. Tapping on screen then gives you acces to both System and Ringer volume (tap on title tab to switch).
"I end up with no possibility to start tomtom or Igo ... out of memory"
I'm aware of this. I chose the option to make builds as solid and nice as possible, however Manila + scrolling start menu with 45 px icons in high res do eat memory. I suggest disable Manila then use the Hibernate in Tools to regain some RAM. Also close all un-necessary programs that may be open. Then try again your favorite GPS app. It might work better or not (mostly IGO case).
My personal thought is that IGO is a nice GPS program, but not suitable with combination of Trin hardware / WM6.5 eaten ressources / Manila greedy interface. You might try to switch to the nUdE versions as they probably behave better from that point of view. Or go try Tomtom, lighter on ressources. At least, think that Trinity hardware is 3 years old and very limited by those 64M ram or less.
I couldn't resolve myself to use WM 6 old UI on WM 6.5 builds ... if so, there is no reason of upgrading to my eyes, as essence of WinMO 6.5 is a progression towards something more touch friendly, and also nicer interface for eyes not to be "injured" ...
Note that it was really long work to extract higher px from raw executables and transfer them to transparent 45 px pngs ... but interface is much nice & cleaner !!!
To be continued ...
nAr
Hello you both,
so the Titanium Version don't works on my trinity, after loading bootloader and start the ROMUpdateUtility it freezes at the bootscreen with the second red letters. Also a new flashing or a soft reset wont work.
Manila. Flashing works fine, after that is a reboot and the display shows black then appears a white screen after tipping on it the disply configuration appears. Then it starts and starts all configurations, then a failure is shown " Abort: File not found \StorageCard\Cabs\Configuration_Network.cab" by pressing ok a new configuration started after that a restart. Then I see no background picture and i just can press "Kontakte" and "Kalendar" The Start button don't worked. After that I copied the directory "cabs" to my storagecard and then flash it again. But I got the same error again.
Maybe you could tell me, what I did wrong.
Wish you a merry christmas of course
Please, after flash, when device restarts, you're supposed to perform a hard reset, not a simple soft reset.
Also, check that the SDConfig.txt is copied to root of SD,has the scheme
"CAB: \Speicherkarte\Cabs\GoogleMaps.CAB
CAB: \Speicherkarte\Cabs\youtube.CAB"
and not storage card.
Cabs folder at root of Storage Card as you copied it I think there is no error ...
Both rOms work on my device, I think Ickebins tested the Manila too and it works for him.
So why not for you
Best regards,
nAr
are screens coming?
Kitchen
Can u post a your kitchen here?
da_gluck said:
Can u post a your kitchen here?
Click to expand...
Click to collapse
I'll release kitchen when Icke will tell me that OEM are 100% as he wants them to be, not before
And, with those 4 builds, 21854, 21864, 21874 & 23016 it's about 0,98 Go non compressed.
For the screens, yes, I will add them, I need to make a good preview though
regards,
nAr
Hello narshorn,
Thanks for the xmas Rom.
for me everything works fine yet.
Greats
Remo
Phone Vol.
How can i change the ringvolume of the Phone in Titanium.
Its not possible.
SIM Manager no funnction.
On the the titlebar you cant press the volume or disconnect the data connection.
Help pleas.
Remo
Radom55 said:
How can i change the ringvolume of the Phone in Titanium.
Its not possible.
Click to expand...
Click to collapse
You have to use Tasten in Personlisch to put SetVolume at hardware button then you can access ring and system volume just by pressing key
Radom55 said:
SIM Manager no funnction.
Click to expand...
Click to collapse
Oh, strange, I'll look at this ...
Radom55 said:
On the the titlebar you cant press the volume or disconnect the data connection.
Help pleas.
Remo
Click to expand...
Click to collapse
Volume you had the info, to disconnect data, just hold the red hang down button for 3 seconds or so ... or go into the comm manager to disconnect.
nAr
ScreenShots
Are there any screenshots? Can i look on your rom? thx.
hi
good job ..... and good rom ..
I need
Manila Version English language ....
Thanks...
Hi nar, here my results:
This ROM version is not working. After booting I see a white screen, on top the taskbar with the start button, no manila. Start-button will not work, Trin is very slow by pressing any buttons.
@myxin i got the same errors as you, nar helped me by private messages but we couldn't find the failure in the system :/
Myxin said:
Hi nar, here my results:
This ROM version is not working. After booting I see a white screen, on top the taskbar with the start button, no manila. Start-button will not work, Trin is very slow by pressing any buttons.
Click to expand...
Click to collapse
I'm so sorry, you guys seem the only ones to get problem on those roms. Myxin, I guess your hardware is not in good condition because your WLAN doesn't work anymore ... right ? white -avenger, I dunno, you should be sure to get Olipro 1.20, last radio and flash from tricolor. Other than that, I'm sorry, I can't help
nAr
narshorn said:
Myxin, I guess your hardware is not in good condition because your WLAN doesn't work anymore ... right ?
Click to expand...
Click to collapse
Yes, you're right! I tried all I found in the internet to unbrick my WLAN. Nothing works. You think that is my problem to the white screen?
But, by the way, I will sell my trinity on eBay the next days. I will not put any work in the future to my WLAN problem into the trin and I flashed back the original vodafone WM5 firmware (and WLAN will even not work again...)
Nar, further on with your great ROM, I look regularly back into this thread.
My Wlan works. I look for Olipro 1.20 and the last radio but I'm quiet sure I got it allways.
greet
EDIT: My Software-Information
OS: 5.2.23016 (23016.5.3.0)
Manila-Version:
ROM-Version: 23016_IE8-MAN
ROM-Date: 11/25/09
Radio: 1..38.00.11
Protocol-Version: 32.71.7020.12H
Maybe it's really the Radio but I don't understand cause I installed 1.56.70.11 :/
You flashed from tricolor screen ? Sorry I don't remember
Yes, and I got the white Screen.
In Tri-Color is written that I got Olipro 1.20

Categories

Resources