Develop Bugs

keyboard fix

anyone have the keyboard fix in the wm6 where the @ symbol is the correct button it is on the keyboard?

luniz97 said:
anyone have the keyboard fix in the wm6 where the @ symbol is the correct button it is on the keyboard?
Click to expand...
Click to collapse
Edit the registry so you keyboard language will reflect your system language:
Goto the following registry entry
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty]
There is a key called 'Layout' and it is in Decimal.
The default value of English ROM is 20409, and Chinese ROM is 20404 (both are in hexadecimal).
The suitable value for German Hermes keyboard is 20407 (132103 in decimal).
The suitable value for Spanish Hermes keyboard is 2040a (132106 in decimal).
Probably Hermes use 20+country ID (409=WWE, 407=German, 404=Trad. Chinese, etc...) format for keyboard layout value.
After changing these settings soft reset the device to make it work.
If you are using Cingular device there should be a CAB floating around, use search.

i tried to search...i used the cingular wap settings but didn't find another cingular cab...if you can post it here...it would be greatly appreciated...

i just tried changing the registry...to the english one...it doesn't work?

http://rapidshare.com/files/21995373/8525_Keyboard_Fix_WMXL.CAB

am i retarded when i search or am i doing it wrong? i can never find anything...? please tell me if you guys are doing anything different that search the forum...

luniz97 said:
am i retarded when i search or am i doing it wrong? i can never find anything...? please tell me if you guys are doing anything different that search the forum...
Click to expand...
Click to collapse
I am using Google to find what needed on this site. If you use good search query you will get better results than with integrated search (and usually it is faster too ).

luniz97 said:
am i retarded when i search or am i doing it wrong? i can never find anything...? please tell me if you guys are doing anything different that search the forum...
Click to expand...
Click to collapse
A lot of it may be that we have read a lot of posts and happen to remember which thread it was in, however, I just did a search to see if I could find it.
"Cingular keyboard fix cab" is what I used. It was the third post down. When looking for a file, just click the little paperclip and it will show all the available files in that thread.
Much easier than reading 400 posts.
Enjoy the forum

Scrog said:
http://rapidshare.com/files/21995373/8525_Keyboard_Fix_WMXL.CAB
Click to expand...
Click to collapse
I downloaded this path but i am not sure what to do with them after extracting them. I am new to upgrading my hermes. I am running Schap's 4.31 rom. I am trying to get my keyboard to operate correctly. I tried a few of the ways above and have failed.

JD_5669 said:
I downloaded this path but i am not sure what to do with them after extracting them. I am new to upgrading my hermes. I am running Schap's 4.31 rom. I am trying to get my keyboard to operate correctly. I tried a few of the ways above and have failed.
Click to expand...
Click to collapse
You can use
1) advanced config to set the keyboard language
2) DONT extract the cab, just copy it to your phone, then click on it in file explorer, it will install then.

KarhU said:
The default value of English ROM is 20409, and Chinese ROM is 20404 (both are in hexadecimal).
Click to expand...
Click to collapse
I entered 40409 in "Decimal" and it worked after a soft reset.
Previously I entered 20409 and it did not.
Edit: I have some buttons which still do not work.
The ' and &.
Frustrating!

Yawn....
HTCustom took care of restoring my keyboard layout.
Thanks to the original coder of HTCustom....

Keyboard fix works on Touch Pro2!
Thankx Xaltotun!

what would be the code for a french azerty keyboard layout

[release] WM6 Black Pro v3.0.1-CCS WWE Asia Edition [CHT/CHS/JPN]

Hi All,
First of all, credit goes to the original ROM author - jasjamming
Based on the Black v3.0.1, I have changed the following:
- Remove English SIPs (Letter Recognizer, Block Recognizer etc).
- Set Keyboard SIP as default.
- Included Windows CHT IME (M$ Phonetic & Chajei).
- Included Windows CHS IME (M$ PinYin).
- Included Windows JPN IME (M$ Kana & Romaji).
- Included PIM Backup v1.9.0.0
- Added CommManagerVibrateFix.
- Applied WM VI Black Update BT Drivers.cab.
- Added mingliu font, change wince.nls for Chinese/Japanese/Korean support (Korean need proper fonts).
- Added ClearTemp v0.9.2.4.
- Enabled NITZ time sync by default.
- HTC X-Button/Task Manager updated to v1.5.
- Replaced IA_Zip with PocketRAR v3.6 (freeware)
- Added VistaHide Battery Bar.
- Added SIP_CHT, SIP_CHS, SIP_JPN cab files for change SIPs (located in \Windows\)
- Replaced built-in MobileCalculator to Eval.
- Upgraded Office to 2007 version. (support docx, xlsx, pptx etc)
I've also included 3 cab file in the \Windows folder -- SIP_CHT.cab SIP_CHS.cab SIP_JPN.cab
Please remember to install one of the cab file to enable the inputs (soft reset after installation), otherwise only english input is available.
For additional programs (eg, VOIP, MSN Messenger), please visit the original black thread.
For chinese description or screenshots, please visit:
http://blog.yam.com/leo2016/article/10104618
Download:
http://www.sharebig.com/d/spxowmtll/0t9cFGM464C682B0E/Black_v3.0.1-CCS.zip.htm
(password: [email protected])
or
http://www.megaupload.com/?d=OAF20XT6

great thanks
looking forward to try this one out! thanks!

Thanks a lot for this new rom release
Any Traditional Chinese Handwrite Input function?
Thanks

As Ricky said, i would also like to thank jasjamming first...
now..
THANK YOU THANK YOU THANK YOU Ricky. Your solution is the only one that works stably for reading chinese... again, thank you very much!

Hi Ricky
I just installed the rom, and I notice that the font size is funny. The default size for the menu item does not change even if i change it in the screen adjustment screen (Settings-> system -> Screen). This does not happen with your old rom...
Thanks!
Slider

HKFreak:
Sorry that I did not include any of the handwriting software this time, I was trying to create a cab file for the Handwriting, however, everytime I installed the cab file I made the touchscreen would stop function (need to use hard reset to fix).
I'll find a solution later on... (oh well... maybe it's time to try 3rd party inputs )
Slider5354:
Hi, I realised this problem too, it is due to a reg key for chinese to enable "line break" (not sure if you have seen this problem on the previous version or not), if you use PIE to visit chinese/japanese websites, the text would not break into lines properly.
Once I added change the reg key the line break problem solved.
what you can do is change the reg key back to english one, use the RegEdit problem in System, find the key called "SystemLCID", change the value from 404 to 409 and do a soft reset, should fix your problem

X01HT Installed and Working Well!
Well done Ricky, awesome job. I found the Japanese input pretty painful, as it didn't have the correct romaji option, instead the layout for a true Japanese keyboard, which the X01HT doesn't have.
I used Asukal's one (tried to upload, but no go) and that is exactly as it should be. You might look at replacing your's with that one.
I will let you know how it goes as I run it through its paces, but its looking impressive so far.
Now where's the Black 3.5 version

Thanks, got it!!

Sorry, got it, thanks

thanks to you and the original rom chef jj. would like to know is 簡易 input method included?

RickyLan said:
HKFreak:
Sorry that I did not include any of the handwriting software this time, I was trying to create a cab file for the Handwriting, however, everytime I installed the cab file I made the touchscreen would stop function (need to use hard reset to fix).
I'll find a solution later on... (oh well... maybe it's time to try 3rd party inputs )
Slider5354:
Hi, I realised this problem too, it is due to a reg key for chinese to enable "line break" (not sure if you have seen this problem on the previous version or not), if you use PIE to visit chinese/japanese websites, the text would not break into lines properly.
Once I added change the reg key the line break problem solved.
what you can do is change the reg key back to english one, use the RegEdit problem in System, find the key called "SystemLCID", change the value from 404 to 409 and do a soft reset, should fix your problem
Click to expand...
Click to collapse
Mind if you post the cab file here? I need the CHT hand writing indeeded!!!~

RickyLan said:
Slider5354:
Hi, I realised this problem too, it is due to a reg key for chinese to enable "line break" (not sure if you have seen this problem on the previous version or not), if you use PIE to visit chinese/japanese websites, the text would not break into lines properly.
Once I added change the reg key the line break problem solved.
what you can do is change the reg key back to english one, use the RegEdit problem in System, find the key called "SystemLCID", change the value from 404 to 409 and do a soft reset, should fix your problem
Click to expand...
Click to collapse
Thanks Ricky.. I notice text break problem too, and this happens even with regular English rom + CE-Star.. so I guess we can only choose no line breaks, or weird font size... :-\

I've been runing the ROM ever since it went up and haven't had to do a reset yet, whereas with the straight Black 3.01 with the hacks to get it using Japanese, I found myself resetting 5 or more times a day.
Thanks for a great stable release!

Is this rom built up from black 3.0 insted of 3.01?????
I found the Black 3.0 bug still on this ROM....
1) today theme cannot be changed(only Top/Under Bar can be changed)
2) symbol pad cannot be loaded.

how to use korean
I want use korea.
how can i use korea language.

The Voice Command button also disabled. Any idea how to enable it?
And is it possible to set the default input from '拼' to English? (For both keyboard and soft keypad) Thanks!

Ricky, can you post the Japanese SIP cab file on its own?
I'm trying to muck around with Black 3.5. and the Asukal one I've been using up until now doesn't want to work properly.

flashed this no prob. used it to replace 3des + CE Star, which was a very unstable combination.
this is working great. fine job Ricky, and also to whoever did black. Nice ROM. I love my phone again.
anyone know where there is a manual on the input methods. they take some getting used to after CEStar, a manual would help.

hamster0914 said:
Ricky, can you post the Japanese SIP cab file on its own?
I'm trying to muck around with Black 3.5. and the Asukal one I've been using up until now doesn't want to work properly.
Click to expand...
Click to collapse
Really , just can't enable kansaku & tegaki. On 3.5 & all the new released roms.

Yes. All versions > 2.5 seemed not support SIP switching.
I guess some REGISTRY changed.
I switched to LVSW two weeks ago.
It works great!
Cedricguo said:
Really , just can't enable kansaku & tegaki. On 3.5 & all the new released roms.
Click to expand...
Click to collapse

Japanese input/output windows moble 6

Does any one know how to get japanese input and output on the ATT 8525 and ATT 8925 (8925 running WM6, 8525 will be running WM6)? I currently have a free program that does this on WM5 but it doesn't want to work on WM6 (See Link). When I install it on WM6 it makes the keyboard not work.
http://forum.brighthand.com/showthread.php?t=217045
I tried this however it only has support for input, not output, which I need.
Any recommendations. Keep in mind I would like to stay on the free side of things. I'm cheep

For the Kaiser http://forum.xda-developers.com/showthread.php?t=333507
For the Hermes http://forum.xda-developers.com/showthread.php?t=298919
It is possible and free. Read read read!
Edit: Just read your thread. Looks like you are having trouble because it is a Kaiser, right? Check that Kaiser thread. One reg edit is all you need. Also, don't install that Bagoj stuff. Stick to the original WM5 input. It is running smooth on my WM6 Hermes.

i have the hermes. Thanks ill take a look.

Wow, you've got a Hermes and it is still messing up the keyboard!? Well, when and if you have trouble, I will be watching this thread.

yea the hermes doesn't have WM6 on it yet cause ATT hasn't released it. I have it working on it now but my testing with the TYTN 2 tells me that im going to run into this problem when i upgrade the phone.

pwnage said:
Does any one know how to get japanese input and output on the ATT 8525 and ATT 8925 (8925 running WM6, 8525 will be running WM6)? I currently have a free program that does this on WM5 but it doesn't want to work on WM6 (See Link). When I install it on WM6 it makes the keyboard not work.
http://forum.brighthand.com/showthread.php?t=217045
I tried this however it only has support for input, not output, which I need.
Any recommendations. Keep in mind I would like to stay on the free side of things. I'm cheep
Click to expand...
Click to collapse
I build my own ROM with Japanese input/output using Pandora Kitchens with 3.62 ROM. I have made some packages for this with all files from Japanese WM5, not from any commercial third parties. If you are interested in it, I can send you a private message with the packages. Let me know.

thank you for the offer, however voiding the phones warranty of the phone is out of the question. The warranty is very important to the company that I work for.
If you can separate the Japanese input/output from the ROM that would be ok by me. One more thing the Japanese input/output needs to work on Windows Mobile 6, as i already have a program that dose this on WM5.
I have yet to try the previous suggestions. I will be trying these most likely tomorrow.

pwnage said:
thank you for the offer, however voiding the phones warranty of the phone is out of the question. The warranty is very important to the company that I work for.
If you can separate the Japanese input/output from the ROM that would be ok by me. One more thing the Japanese input/output needs to work on Windows Mobile 6, as i already have a program that dose this on WM5.
I have yet to try the previous suggestions. I will be trying these most likely tomorrow.
Click to expand...
Click to collapse
there are a few things you have to do to implement east asian language functions on windows mobile. actually, you can do this without rom cooking.
1) you need to replace wince.nls in windows folder because it is only for western languages. however, it is a rom system file, and simple copy&paste does not make it work.
2) download reloadnls.exe and put it in \Windows\Startup. This makes the new wince.nls work properly. you can download reloadnls.exe from this link:http://www.geocities.jp/hou_ming_2/reloadnls.zip
3) you also need a Japanese font. (for example, msgothic.ac3 from japanese wm6 or windows xp) You can retrieve a font and wince.nls from this zip. http://x01ht.ratn-leaf.com/files/customizer/packages/Japanize_Tiny.zip
4) You also have to change the registry for viewing Japanese texts.
[HKEY_LOCAL_MACHINE\nls]
"LegacyLocaleMode"=dword:00000001
"DefaultLCID"=dword:00000411
"DefaultACP"=dword:000003a4
"DefaultOCP"=dword:000003a4
"SystemLCID"=dword:00000411
[HKEY_LOCAL_MACHINE\Software\Microsoft\FontLink\SystemLink]
"MS PGothic"="\\windows\\tahoma.ttf,Tahoma"
"MS Gothic"="\\windows\\tahoma.ttf,Tahoma"
"MS UI Gothic"="\\windows\\tahoma.ttf,Tahoma"
"Courier New"="\\windows\\msgothic.ac3,MS UI Gothic"
"Tahoma"="\\windows\\msgothic.ac3,MS UI Gothic"
[HKEY_LOCAL_MACHINE\Software\Microsoft\FontLink\SkipTable]
"Tahoma"="005c,00a5,007e,0391-03c9,2026,2116,221a,25a0-25ff"
"Courier New"="005c"
[HKEY_LOCAL_MACHINE\Software\Microsoft\International]
"ACP"=dword:000003a4
"LCID"=dword:00000411
[HKEY_LOCAL_MACHINE\System\GDI]
"DisableFarEastWordBreak"=dword:00000000
[HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\International]
"Default_CodePage"=dword:c6f4
5) After soft rest, you can view Japanese text now.
6) To use MS Japanese IME, you need to copy following files into \Windows. You can find them in Japanese WM5 or you can download from here. http://x01ht.ratn-leaf.com/files/customizer/packages/MSIME.zip
hwxjpn.dll
imjp31.dll
imjp31dx.exe
imjp31k.dll
imjp31s.dic
imjp31s.grm
mboxjpn.96.dll
mboxjpn.dll
msimj.96.dll
msimj.dll
mskana.96.dll
mskana.dll
(You don't need to copy any files in the zip other than files listed above.
7) In the zip above, there are two registry files, defaul.txt and user.txt. Just import them using your favorite registry editor.
8) Soft reset, and you now have a Japanese input function (MS IME) installed in your hermes. However, there is no way to call this function from your keyboard since it is not a japanese keylayout.
9) To call MS IME, you need to assign this function to a key by freeware called PQz. http://1942.rocketspace.net/PQzII/PQzII_20070725_HTC_Hermes.cab
English manual: http://www.nicque.com/PQz/DOC/index_e.htm
Hope you will figure out the way!

Your post is helpful however I am unable to read Japanese. (wish I could) The geocities site you referred me to appears to throw an error but, again, since I cant read Japanese I cant be sure.
I'll give this a shot though

While I am sure qtotter's method works fine, there are easier ways. I myself have a WM6 tytn and get Japanese output/input simply by installing the following two .cabs.
Fonts and wince
http://www.asukal.jp/WM5/LetsJapanNo5.zip
Install and soft reset.
Input, fully accessable from the keyboard
http://hn801.hkes.com/Data/SIP/IME_31J_QVGA_F.zip
Install and soft reset.
You may run into troubles depending on which physical keyboard your tytn has, but these can be solved by a simple registry edit to the keyboard layout key.

larsuck said:
While I am sure qtotter's method works fine, there are easier ways. I myself have a WM6 tytn and get Japanese output/input simply by installing the following two .cabs.
Fonts and wince
http://www.asukal.jp/WM5/LetsJapanNo5.zip
Install and soft reset.
Input, fully accessable from the keyboard
http://hn801.hkes.com/Data/SIP/IME_31J_QVGA_F.zip
Install and soft reset.
You may run into troubles depending on which physical keyboard your tytn has, but these can be solved by a simple registry edit to the keyboard layout key.
Click to expand...
Click to collapse
i know about LetsJapanNo5.zip, but did not introduce it since i am not sure if usemynls.exe included in the cab is freeware.
as for the ime part, i suppose IME_31J_QVGA_F.zip does exactly what i explained above automatically, and i recommend this way.
as for the keyboard part, if your device has a keyboard with non-japanese layout, you cannot call ime as i explained above since there is no key assign for this function by default. you still need PQzII to map ime function to a key on your keyboard.

qtotter said:
i know about LetsJapanNo5.zip, but did not introduce it since i am not sure if usemynls.exe included in the cab is freeware.
Click to expand...
Click to collapse
Heh, heh. I'm not real sure about that myself, but I don't think Asukal would pull anything funny. AFAIK, he is on the level.
What exactly does usemynls.exe do? Does it redirect use of the wince file in Windows to another one? Cause you can just use TotalCommander (or whatever file explorer) to copy over the one in Windows and then do away with usemynls, no?
qtotter said:
as for the keyboard part, if your device has a keyboard with non-japanese layout, you cannot call ime as i explained above since there is no key assign for this function by default. you still need PQzII to map ime function to a key on your keyboard.
Click to expand...
Click to collapse
You sure the tab key (or whatever is just left of the space bar) doesn't function this way if you let the ime cab do its work? What if you edit the registry thusly: [HKEY_LOCAL_MACHINE\Software\Oem\Qwerty] "Layout"= 30411 (Hexadecimal base)
Looking at the X01HT and the 8525, the hardware looks exactly the same to me - same number of keys with the same placement.
qtotter, I have a X01HT, so I'll believe you if you say its so, but it just seems weird to me that HTC would make different hardware which looks the same. If you've never tried it yourself, then perhaps pwnage can be our guinea pig.
BTW, which Hermes rendition are you using, pwnage?

larsuck
Im a R-tard. I have a TYTN and a TYTN II.
Sorry about that.

larsuck said:
While I am sure qtotter's method works fine, there are easier ways. I myself have a WM6 tytn and get Japanese output/input simply by installing the following two .cabs.
Fonts and wince
http://www.asukal.jp/WM5/LetsJapanNo5.zip
Install and soft reset.
Input, fully accessable from the keyboard
http://hn801.hkes.com/Data/SIP/IME_31J_QVGA_F.zip
Install and soft reset.
You may run into troubles depending on which physical keyboard your tytn has, but these can be solved by a simple registry edit to the keyboard layout key.
Click to expand...
Click to collapse
I tried this and the input seems to be fine however the keyboard refuses to work. I did try a few reg settings in the [HKEY_CURRENT_USER\keyboard layout\Preload\1]
Under the preload key I changed "(Default)" from e0010411 to e0010409 (the original reg value).
Under the preload\1 key I changed "(Default)" from ee0010411 to e0010409 (the original reg value).
Now when I switched the values from ee0010411 to e0010409 in both the Japanese input stopped working. When I changed them back they started working (no keyboard).
Am I inputing the wrong reg keys or what?

larsuck said:
Heh, heh. I'm not real sure about that myself, but I don't think Asukal would pull anything funny. AFAIK, he is on the level.
What exactly does usemynls.exe do? Does it redirect use of the wince file in Windows to another one? Cause you can just use TotalCommander (or whatever file explorer) to copy over the one in Windows and then do away with usemynls, no?
Click to expand...
Click to collapse
i don't remember well, but i think usemynls.exe comes with ce star...
it ignores the original wince.nls and make the system refer to your own wince.nls stored somewhere else than /window. as i explain before, simple overwrite does not work with rom system files.
larsuck said:
You sure the tab key (or whatever is just left of the space bar) doesn't function this way if you let the ime cab do its work? What if you edit the registry thusly: [HKEY_LOCAL_MACHINE\Software\Oem\Qwerty] "Layout"= 30411 (Hexadecimal base)
Looking at the X01HT and the 8525, the hardware looks exactly the same to me - same number of keys with the same placement.
qtotter, I have a X01HT, so I'll believe you if you say its so, but it just seems weird to me that HTC would make different hardware which looks the same. If you've never tried it yourself, then perhaps pwnage can be our guinea pig.
BTW, which Hermes rendition are you using, pwnage?
Click to expand...
Click to collapse
there are many keyboard layouts. check blue silk-printed characters on the keys.

pwnage said:
I tried this and the input seems to be fine however the keyboard refuses to work. I did try a few reg settings in the [HKEY_CURRENT_USER\keyboard layout\Preload\1]
Under the preload key I changed "(Default)" from e0010411 to e0010409 (the original reg value).
Under the preload\1 key I changed "(Default)" from ee0010411 to e0010409 (the original reg value).
Now when I switched the values from ee0010411 to e0010409 in both the Japanese input stopped working. When I changed them back they started working (no keyboard).
Am I inputing the wrong reg keys or what?
Click to expand...
Click to collapse
no, you are not doing anything wrong. LetsJapanNo5 forces keyboard layout change.
this is what i explained above. 10409 is for the english keyboard layout, and 10411 is for the japanese keyboard layout. since you are using an english keyboard, you need to keep the value 10409. however, it does not have a key assigned to ime call. you simply need to use PQzII to map this function to any key you want.

pwnage said:
I tried this and the input seems to be fine however the keyboard refuses to work. I did try a few reg settings in the [HKEY_CURRENT_USER\keyboard layout\Preload\1]
Under the preload key I changed "(Default)" from e0010411 to e0010409 (the original reg value).
Under the preload\1 key I changed "(Default)" from ee0010411 to e0010409 (the original reg value).
Now when I switched the values from ee0010411 to e0010409 in both the Japanese input stopped working. When I changed them back they started working (no keyboard).
Am I inputing the wrong reg keys or what?
Click to expand...
Click to collapse
When you say the keyboard stopped working, do you mean that it just doesn't respond at all, no matter what buttons you press?
Is this on the Tytn or the TytnII?
If this is the TytnII, check this thread http://forum.xda-developers.com/showthread.php?t=333507&page=2
That guy had problems with his keyboard AND buttons responding, but got everything working with the two .cab files I posted above with one regedit.

qtotter said:
there are many keyboard layouts. check blue silk-printed characters on the keys.
Click to expand...
Click to collapse
Yeah, but isn't that just paint? I don't want to sound pendantic, but if the hardware below the paint is the same, then I don't see what the problem would be.
qtotter said:
it ignores the original wince.nls and make the system refer to your own wince.nls stored somewhere else than /window. as i explain before, simple overwrite does not work with rom system files.
Click to expand...
Click to collapse
You can't use the File Explorer built into WM to overwrite system files, so I use GSFinder. Others use Total Commander. These can copy, delete, whatever to system files.
Anyway, now thanks to your info about usemynsl.exe, I have another 350kb or so free as I was able to overwrite my wince file in Windows (which allows .NET programs to function! YEAH!) and delete the usemynsl and the redundant wince in my Temp folder.

larsuck said:
Anyway, now thanks to your info about usemynsl.exe, I have another 350kb or so free as I was able to overwrite my wince file in Windows (which allows .NET programs to function! YEAH!) and delete the usemynsl and the redundant wince in my Temp folder.
Click to expand...
Click to collapse
i am not saying you cannot copy and paste different rom system files to your device. even if you copy and paste another wince.nls, the system does not refer to the new wince.nls.
this is the reason why people use usemynsl.exe to force the system to refer to another wince.nls in a different location or reloadnls.exe to force the system to refer to the overwrote wince.nls in /windows.
if you wanna save disk space, i recommend you build your own rom burned with east asian wince.nls like i do.

qtotter said:
i am not saying you cannot copy and paste different rom system files to your device. even if you copy and paste another wince.nls, the system does not refer to the new wince.nls.
Click to expand...
Click to collapse
Uh oh. So what did I do to my tytn?
I copied over the original wince in Windows with the one from LetsJapan in Temp.
I deleted the wince in Temp and moved usemynls so that it wouldn't run on startup.
Everything seems to be running smoothly, and I have soft reset (for other reasons) a few times between now and then...
No problems so far (its been a couple of days), but can I expect them?

How to get Samsung i780 Keyboard Qwerty to Azerty driver ?

Hello all,
i have read through a lot in the forum and have alerady flashed and tweaked a lot my i780 with my readings of your Forum. (after doing the same for my TyTNII !))
Bravo to all BTW.
I have a French i780 with an AZERTY keyboard.
I have flashed with the DXHC4 PDA & Phone ROM found here. Since then I have a QWERTY keyboard when the physical keyboard is AZERTY
I have tried the registry edition in order to modify the keyboard mapping to 040C code in the 3 locations described in the different posts without success as it rendres inactive the keyboard.
I tried the different combinations etc...
Here are the exact lines :
in hkey_current_user\keyboard layout\preload string default e0010409 changed to e001040c
\\\HKLM\System\CurrentControlSet\Control\Keyboard Layout\Active to 0000040c
Is there an issue with a dll or someting in addition ?
Also, I do use RealVGA in 96dpi with an English pack as the french pack is trashing the i780
Any idea is more than welcome !

Hello the i780 specialists ?
Any Idea what registry key to update ? or which driver ?
do you think a cab like the one for the Kayser can be compiled ?
Thanks

While youre on it, please get us the key for Swedish keyb as well
I flashed with the english ROM as well, and....

I am pretty sure there must be a way and it would be great to know the right registry location - would like to change mine over to QUERTZ as I am having an English rom with a German keyboard...
And ideas anyone?
Thanks
Alex

AE Keyboard Mapper
While we are waiting for better solution the buttons can be mapped to right letters wit AE Keyboard Mapper program. I've mapped my samsungs ä and ö buttons with that and they are working as they should.

Juggeli said:
While we are waiting for better solution the buttons can be mapped to right letters wit AE Keyboard Mapper program. I've mapped my samsungs ä and ö buttons with that and they are working as they should.
Click to expand...
Click to collapse
Yes it work but i creates a very irritating keybaord lag when using the keys that is mapped with AE keyboardmapper.

Yep, I have seen this tutorial, but I must admit that I am not at all interested in the software emulation. I 'd rather wait for a proper OS / registry / hw solution

No news guys ???

First of all, I'm no export in this and want to apologize for my english, cause I'm german.
Me too wants to change the keyboard layout as I have an english rom with qwerty and want to get back my german qwertz-layout.
As far as I've found out there is an registry entry under "HKLM/Hardware/DEVICEMAP/KEYBD/DriverName" which with my device maps to a dll named "zylonite_keypad_us.dll"
This file seems to be located in the ROM. I couldn't copy it for editing. Maybe someone can develop an idea how to deal with this.

solution here :
http://forum.xda-developers.com/showthread.php?t=290967
For now my keyboard does more, but I hope

webise said:
solution here :
http://forum.xda-developers.com/showthread.php?t=290967
For now my keyboard does more, but I hope
Click to expand...
Click to collapse
Do you have an I780?
If yes, which of these mentioned steps did you do?
This is not yet working for me. At the Moment the hardware keyboard doesn't work at all...
Edit: So, keyboard is working again. But "z" and "y" are still "swapped". So still not the German- QWERTZ

Same here, ive got an azerty i780, but this tip does'nt work for me

It doesn't work at all
The keyboard is rendered NON active by modifiying these reg keys / strings ...

webise said:
solution here :
http://forum.xda-developers.com/showthread.php?t=290967
For now my keyboard does more, but I hope
Click to expand...
Click to collapse
When I change the settings like that thread, my keyboard stopped working
I use the code: 041d for Swedish.
Mind helping out what I need to do? I followed the instructions from that page but the keyboard just stopped working, the hardware keyb that is.

In my humble opinion the problem is that when we change the registry keys we are telling windows to use a different dll that simply is not there, and so the keyboard becomes inactive. The solution is that someone with a German WM6 gets the german dll and shares it with us.
Regards,
Luís

Before flashing my azerty orange fr i780, i saved HKLM sytem tree, and the dll is the same.
The only difference in HKLM tree is :
\\HKLM\System\CurrentControlSet\Control\Keyboard Layout\Active
040c for azerty french
0409 for US
But doesn't work on my device

lmbranco said:
In my humble opinion the problem is that when we change the registry keys we are telling windows to use a different dll that simply is not there, and so the keyboard becomes inactive. The solution is that someone with a German WM6 gets the german dll and shares it with us.
Regards,
Luís
Click to expand...
Click to collapse
Or a Swedish ROM since there are a few of us that would need the swedish dll then

I still got the German phone and intend to upgrade to UK ROM. What dll exactly do you guys need?

dll is : zylonite_keypad_Us.dll
But totalcommander refuses to copy the file

entropy said:
I still got the German phone and intend to upgrade to UK ROM. What dll exactly do you guys need?
Click to expand...
Click to collapse
Do you have a registry editor on yout I780?
Then look at: HKLM/Hardware/DEVICEMAP/KEYBD/DriverName
There should be a .dll listed.
I guess thats the one we need. But I fear, as webise said, that you can't copy this file from your windows folder. As far as I've seen this file is in ROM.

need help

i put kavanas ROM on my phone. and i have a probelm where my a,z,w,e,r,s,d,f,x,c,v buttons dont work.. idk if this is new or what. but can someone help?
i tired that eT9 keyboard fix thing.. and didnt work.. any help?

up's anybody?

alexisdash said:
i put kavanas ROM on my phone. and i have a probelm where my a,z,w,e,r,s,d,f,x,c,v buttons dont work.. idk if this is new or what. but can someone help?
i tired that eT9 keyboard fix thing.. and didnt work.. any help?
Click to expand...
Click to collapse
May be an easier way? But how about a Hard-Reset
You could always see if these buttons work without flashed ROM
Then reflash with Kavana if you still have this problem after installing the eT9.cab and open PIE and in input box press FN+Space choose eT9, now if this does not solve it then flash with Kavana Ricky Remade.
Sorry i can't be more help.

From Mikey.
To install eT9 keyboard mapping changer:
1) Download THIS.
2) Transfer all the cabs and the .css file to your \Windows folder via ActiveSync
3) Place the .lnk file in your 'My Documents' folder
4) Using 'File Explorer' (on your phone), click on "Excalibur eT9 Changer" and pick the layout.
5) Reboot your phone
UK Excalibur KeyMap
USA Excalibur KeyMap
Spanish Excalibur KeyMap
Portuguese Excalibur KeyMap
German Excalibur KeyMap
Italian Excalibur KeyMap

http://forum.xda-developers.com/showthread.php?t=397723

gixxum said:
http://forum.xda-developers.com/showthread.php?t=397723
Click to expand...
Click to collapse
i tired that eT9 keyboard fix thing.. and didnt work.. any help?

cool got it thanks