sofware for xda keyboard - General Accessories

I bought the expandable/foldable xda keyboard from o2 for my xda, but my phone crashed and I lost the cd a few months ago. I don't have any documents that would tell me about the makers website so I have no idea about what to do. Does anyone know where you can download the installation software

Here you are
Dear you is what you need to install to make it work. Note that you should DISABLE the "recieve all incoming beam" option in the setting to aviod possible port conflict when using the foldable keyboard.
HTH

How do you install this CAB file?
Ken,
I finally got a G7B0 folding keyboard for my SX56 (XDA). I lacked the CD, so I downloaded the driver from the Darfon site that was labeled G7B0. I installed it and it turned up on the list of Programs on the phone, but nothing happens when I put it on the keyboard. And when I click on the lower right corner, I get the usual list of choices (letter recognizer, on-screen keyboard, etc) but no mention of the folding keyboard. It does appear in "Remove Programs" as being in memory, though.
I downloaded the CAB file you attached (thank you) and clicked on it; au unzip program appeared and extracted seven files, ending in .001, .002, etc.
Now what? I can transfer these into the phone, but in which directory? And how do I get the phone to recognize and use these?
Dan

Dear Boston,
The file I attached here is already in .CAB format, You need not extract the file, just copy it to whatever location you prefer on your device (XDA) and then double click on it for self-installation.
Once the installation is complete, the keyboard icon should appear in the program menu and not in the "input method panel" in the lower right corner.
Once it's complete, activate the program, and in the window of setting, select "Keyboard" (not Infrared and serial). And as I mentioned, to aviod possible port conflicts, UNselect the "recieve all incoming beam" in the setting window.
HTH
Ken

Thanks
Jusy a note to say thank you to those who post replies to those of us who need to be spoon-fed when we hit problems, and to the site for archiving these replies.
Special thanks to Ken, I have just successfully installed the driver for a keyboard given to me by a friend.
Regards,
Dave

Related

Cab Operator settings

Hello :
What do i have to do to put this mms and internet configs atached working on wm6 ? They are from wm5,
Thnks
Copy on your device and than execute the cab file...
Regards,
Primoz
they didnt work..already have done...
Cab to PPC From Windows XP
You don't have to copy the cab to PPC to install the program. You can use this small utility to do the process just like you'll do with .exe files installer.
This utility is posted by Ryubai to PXDXA .
How to:
1. run the command xp_install.cmd inside the cab2PPCfromXP.zip archive to install the utility as a context menu command.
2. when you right-click the cab file,you will see "install to ppc" in contextmenu.click it and a dialog with which you are very simillar pops up......then you know what you should do next.
TQ.
cyphol is there any way to make CAB files like this for any operator?
Regards,
Primoz
Pc78 said:
cyphol is there any way to make CAB files like this for any operator?
Regards,
Primoz
Click to expand...
Click to collapse
There's always a way but you have to know the registry keys involved but I think there're many already floating around in this forum so you can try search for them.
Eh...for the Slovenian operators there are no CAB files...thx anyway
Regards,
Primoz
Hi, i've just upgraded to WM6 (Black Edition v1.1) without any trouble but i can't connect to the internet via internet explorer, i get the message 'cannot connect'. I've download all cabs (extRom and windows) and ran them all. I've downloaded cab2PPCfromXP.zip and ran that on the PC as described, although nothing much happens.
I have noticed after running t-mobiles cabs that instead of '3G' i now get 'E' which seems a step back.
If i Hard reset my device, can some give step by step directions to me having a normal UK T-mobile phone. I mainly use my phone for emails so i really need this side to work.
Cheers
cyphol said:
There's always a way but you have to know the registry keys involved but I think there're many already floating around in this forum so you can try search for them.
Click to expand...
Click to collapse
I am currently in the stage of making cab files for all the operators, please PM me your carrier settings, aswell as mms settings, and your carrier name.
I will make a cab for that operator.
johnk1973 said:
Hi, i've just upgraded to WM6 (Black Edition v1.1) without any trouble but i can't connect to the internet via internet explorer, i get the message 'cannot connect'. I've download all cabs (extRom and windows) and ran them all. I've downloaded cab2PPCfromXP.zip and ran that on the PC as described, although nothing much happens.
I have noticed after running t-mobiles cabs that instead of '3G' i now get 'E' which seems a step back.
If i Hard reset my device, can some give step by step directions to me having a normal UK T-mobile phone. I mainly use my phone for emails so i really need this side to work.
Cheers
Click to expand...
Click to collapse
It's sometimes about wrong configuration of mobile ops settings you entered into the PDAs. So, make sure that everything typed in is correct.

unable to update hx4700 2003 - MW6 using Bootloader!

I've read good reviews on chrismrulz's bootlaoder programe and I'm trying to use it to update my iPAQ 4700 from 2003 to WM6. However I am obviously doing something wrong as I just cannot get it to work!
Please can anyone offer any advice?
I hope I am following the exact instructions as mentioned here at http://forum.xda-developers.com/showthread.php?t=325727
and here is what is happening:
Step 1.
Make new folder in root directory.
No Problem c:\Bootloader set up.
Step 2.
Download WM6 ROM and bootloader into file.
Done as directed from links in instructions directly into new folder.
Checked and c:\Bootloader now has 2 files in it Bootloader.exe and WM6_4700_0_7_0_RELEASE4.rar
Step 3.
Put hx4700 in bootloader mode and place in sync cradle.
I assume I have done this correctly. Screen goes blank and you can just make out the HP logo it says USB when in cradle and shows version 1.01
Step 4.
Open bootloader and select image.
Ok I go to folder and double click on Bootloader.exe
I get a security warning about the software and ignor by pressing run.
2 things now happen simutaniously. Bootloader.exe expands and creates c:\Bootloader\Bootloader and fills it with more files and directories and....
I get a box asking me to select a file to flash ROM to my device. I change the directory back to C:\Bootloader and select WM6_4700_0_7_0_RELEASE4.rar and press open.
I get a message telling me to please wait the file is being extracted and inviting me to press ok. Before I can press ok the box is replaced with a winRAR Diagonistic Message saying c:\Bootloader\WM6_4700_0_7_0_RELEASE4.rar no files to extract.
I close this dialog box and get another message telling me to wait whilst it edits files. Then this in turn is replaced by a message saying Error reading file c:\Bootloader\Bootloader\temp_nbf\ I click on OK to acknowledge.
And that’s it nothing else happens.
I've obviously read the instructions wrong or something can anyone help point me in the right direction? Or offer any alternatives?
I'm using Active Sync 3.7.1
Thanks
Phil
Open the rar file (with WinRar), and read the instructions that are in the Readme.txt file... And update your Activesync to version 4.5, which is needed for WM6.
Excellent,
Thank you Ridolfo, so much easier than what I was trying to do. I now have WM6 working and am very pleased with it.
One problem i now have is Activesync 4.5 will not work with my Outlook 2002 I dont suppose anyone knows a workaround or do I have to buy a copy of Outlook 2007?
Phil3099 said:
Excellent,
Thank you Ridolfo, so much easier than what I was trying to do. I now have WM6 working and am very pleased with it.
One problem i now have is Activesync 4.5 will not work with my Outlook 2002 I dont suppose anyone knows a workaround or do I have to buy a copy of Outlook 2007?
Click to expand...
Click to collapse
Very strange indeed, my AS works fine with OL2002... Did you use the MS Office Update to get the latest servicepacks for OL ?
Dirk
Outlook 2002 now ok. I was havinag a bad day yesterday. Now if I can just find a way of viewing java enabled web pages I will be happy
Phil3099 said:
Outlook 2002 now ok. I was havinag a bad day yesterday. Now if I can just find a way of viewing java enabled web pages I will be happy
Click to expand...
Click to collapse
Try these .....
First install JBed, then Opera
Cheers
Dirk
Hi Dirlan,
Thank you for the files. I was already experimenting with Opera so I deleted it from my iPAQ loaded Cloudyfa_EsmertecJbed.cab and then reinstalled Opera.
Unfortunately I get an error message from Jbed saying "the file jbed cannot be opened. Either it is not signed or one of its components cannot be found.
Any ideas?
Phil
After extracting using WinRAR
Trying to upgrade from 2003 to WM6 ...
After extracting WM6_4700_0_7_0_RELEASE4.rar using WinRAR I am trying to follow the instructions in the readme.txt (as Bootloader didn't work for me as in the first post in this thread):
From readme.txt
To begin with if you want to flash your device using cradle,you have to:
1.In processes (CTRL+ALT+DEL) you must kill Wcesscom.exe
2.Then Enter in Bootloader (Contacts+iTask+Reset)
3.Put your device on usb cradle.
4.Run mtty11a.exe
5.In "Port" choose \\.\WCEUSBSH001 and click OK
6.Write command: lnb OS_WM6.nb0
7.Wait
8.Enjoy yourself
As I'm not all that familiar with this can someone explain in step-by-step what's involved with the mtty11a.exe application, and Step 6?
Currently my hx4700 is what I think in bootloader mode (Screen is dim an I can barely make out "USB" the hp logo and the current version "v1.01"). I previously tried the original WM5 upgrade and it just dies on me at 0.1%.
Hi tk2000
As I posted the original post I know exactly what you are going through. However once I went through the instructions you are currently trying to use every thing went smoothly. You have extracted the .rar file and are unsure of the mtty11a.exe file.
Assuming you have you have killed Wcesscom.exe on your pc as in step 1,
and the device in in its cradle in bootloader mode (as you described very faint HP logo, USB and version 1.01 displayed).
Then double click on the mtty11a.exe as in step 4. This then brings up an application and you will see a dropdown menu next to port, simply select the option \\.\WCEUSBSH001 and click ok.
6.Write command: lnb OS_WM6.nb0 now this stage I was a little unsure of myself I simply typed "lnb OS_WM6.nb0" in from the keyboard and pressed enter and it started to load. This takes a few minutes but afterwards you should have WM6 on your device.
I had to do a couple of hardware restarts and it took a few minutes in its cradle but it all works fine for me.
Phil3099 said:
Hi Dirlan,
Thank you for the files. I was already experimenting with Opera so I deleted it from my iPAQ loaded Cloudyfa_EsmertecJbed.cab and then reinstalled Opera.
Unfortunately I get an error message from Jbed saying "the file jbed cannot be opened. Either it is not signed or one of its components cannot be found.
Any ideas?
Phil
Click to expand...
Click to collapse
Hi Phil,
There should be an 'opera-unsigned*.cab' somewhere here on the forum. I didn't try it because Opera works fine for me.
Sorry
Dirk
Phil3099, I a followed the instructions exactly but I don't see a status bar on the pda. mtty showes the progress with lines of + but the 4700 stays on the hp logo screen with USB on top.

needed: \windows\keypad.dll - Samsung i617

I just purchased the US AT&T Samsung i907 (US i780).
The keyboard sucks. Press and Hold = repeat; not ALT CHAR. Also the keyboard can only accept 1 key input at a time.
With No physical Dpad, the keyboard needs to be fully working.
The keyboard is the same as the i617, but they use different drivers.
i617 = \windows\keypad.dll
i907 = \windows\zylonite_keypad_Us.dll
I've tried grabbing this file off of my friends i617, but copying the file would produce an error or a 0kb file. Using a USB Cable and Activesync wouldn't even show it when browsing files.
I have all the required registry keys that I need... but I'm looking for this "keypad.dll" from a Blackjack II. I've downloaded a few ROM dumps from WM6 and WM6.1 but all I get are RAW files, which I'm assuming are from a Kitchen.
Without getting too involved in Blackjack II Rom and Kitchen setup, does anyone have access to this file they can upload or have a method for me to extract this file myself?
some remote registry editors show the "real contents" of the phone... you may be able dump that way
just out of curiosity sake.... what kind of a drive do windows pick up the mobile device..... you might be able to right a batch file or use ms dos commands (copy function) to dump things...... i dunno, food for thought.....
edit: you can also try mtty or putty
anyone with any other more definitive answers? I'll be the first to admit I have no idea what I'm doing.
I have the RAW ROM Dump files, but I'm assuming you have to be some sort of magical wizard to open them or have a Kitchen.
Any wizards out there have a kitchen they can shoot me a link to an uploaded blackjack 2 keypad.dll?
Bump
Hey, I'm sorry to inform that i cannot help you with this, but if you made any progress, I'd very much like to know how you did it. I need a new driver for the same reasons as you. Looking for a BJ2 keypad driver and with that a scandinavian layout config.
I'm also very interested!!
@player911
Please!! Dont give up! I would like to help. but i have no idea how.
I hope you made a little progress in that problem.
Good luck and keep up you good work in improving the i907/US i780.
I'll upload if I can off of my BJII. I am thinking of getting the Epix, so this will help me a lot.
Will update soon.
I have the same problem in I600
The relationship is still in OEMMITS.
It has a great relationship.
How would I go about to extract this .dll?
Write to the exact.
and from which the device, you toss it
How to update keypad.dll
My actually driver don't work
Relase topic........
Rename the file? If it doesn't work, just rename it to something else then the original driver will appear. Can you upload it so I can test?
~~Tito~~ said:
Rename the file? If it doesn't work, just rename it to something else then the original driver will appear. Can you upload it so I can test?
Click to expand...
Click to collapse
Do You need keypad.dll from i617?
Yes ! Do you have it?
~~Tito~~ said:
Yes ! Do you have it?
Click to expand...
Click to collapse
Yup.. here You go.
Thanks a bunch! Now to test on my machine ! Backing up right now, and I am about to replace the file when its done. I renamed the keypad.dll to zylonite_keypad_Us.dll, just to see what will happen with out any mods to the file.
EDIT:Ok, here's what happened.
The mouse movement works, but any button presses, keyboard presses do not work. Nothing works except the optical mouse, but it has no click function. Some one has to edit the file to be compatible with the i907/i780. The backlight didn't work either. I got it back to normal, I just deleted the file then soft reseted and the keypad was working again.
EDIT 2:
I opened the DLL in word pad, and there is a lot of things linked to the middle scroll wheel and the 4 way navigation it has. Some one might have to copy some things for the top functions, like the left and right soft keys, the call and end button, the ok and start menu button, and the click of the optical mouse. The remove the functions of the Blackjack 2 like the home button and such.
EDIT 3: Can someone provide the zylonite_keypad_Us.dll for me?
I have the same problem on my i600

[REQ] Wake On Lan

Hi Guys & Gals,
Quick question.....
Has anybody come across a Wake On Lan app for WM6. I have a small home network that I start up from a central PC using Wake On LAN function in the system BIOS. I would like to be able to start my PC's from the Blackstone over my WLAN.
Everything within the LAN & WLAN is running reserved DHCP from the router side so all IP's are constant including the Blackstone.
Cheers for any replies.........
Gilgamesh.......
I don't know if any solution exists but I've read a tutorial (in french sorry) on how to make a wake on line application for wm
http://blogs.msdn.com/pierreca/archive/2009/03/19/wake-on-lan-depuis-votre-t-l-phone.aspx
Hope that could help you
Try this..
jpl69 cheers.........The app works like a charm but is a little basic. Needs the full MAC to be entered manually each time.
What would be really nice is some way of associating the MAC to a short meaningful name that could then be listed so it could just be selected from a list rather than enter the full MAC each time. In this way multiple PC's coud be listed.
While we're at it would also be nice to have a standby button as well so PC's within the LAN could be started and shut down form the app.
I've never written an app before and would either like a few pointers to see if I could do it or see if anyone out there would consider building on the app already posted.
Any suggestion welcome.......
Besides developing an app to that (no time) i could sugest make several shortcuts using resco and parsing the mac as parameter. At least you only had to make it once.
Thanks jpl69 for your continued replies...much appreciated.
I have seen Resco but not realy sure which component to download to edit the exe. I have used PEG (parsing) in other apps at work but just need something to get me started on WM6. I could the replicate the exe per MAC and create a single file or each PC
Might be worth looking at vxUtil: http://www.cambridgevx.com.
This has Wake-On-LAN (among other things), and I think it remembers previously entered values. You can't give things memorable names but it might help.
Gilgamesh1066 said:
Thanks jpl69 for your continued replies...much appreciated.
I have seen Resco but not realy sure which component to download to edit the exe. I have used PEG (parsing) in other apps at work but just need something to get me started on WM6. I could the replicate the exe per MAC and create a single file or each PC
Click to expand...
Click to collapse
i think he means, like, create new shortcut with parameters. Just for example the same as on pc creating a shortcut to c:\quake\quake.exe and use the string "c:\quake\quake.exe" +bind mouse1 shoot +set mode opengl blablabla
Again thanks for the continued replies.....
Downloaded vxUtil and had a play and it does have a working WOL option but again it's messy and not really the simple solution I was looking for. It does have some other features (ping/sweep, tracert & DNS lookup) but I don't really have a use for these.
Still really after a single icon to start each PC as per the shortcut suggestion above.
All suggestions still welcome and appreciated.
I will just try to clarify what was the idea of jpl69.
Please read the README file included in the attached archive (posted by jpl69).
It says:
"Command Line:
===============
Please use as following:
WakeOnLan.exe [MACAddress]
MacAddress can be either 01E4523AEE22 or 01:E4:52:3A:EE:22 "
Now with Resco Explorer (or with Total Commander, which is freeware) one can make several different shortcuts to WakeOnLan.exe, each ending with the specific MAC.
In Total Commander, after creating the shortcut, one must select it, choose "properties", then "shortcut" tab, then manually add the MAC at the end of the "target" line.
Copy the ready shortcut several times, name the new copies whatever you want and place those shortcuts in a folder. Dont forget to change the MAC for each machine.
Hope it helps.
Now I get it......Sorry for the slow uptake but been a busy boy and head has been fried by other things. Will have a play tomorrow and post back results.
Many thanks..........
I dont know if you still looking to do this but I got this working & figured I would reply here for future reference.
First i have a linksys DD-WRT router, so I followed these steps:
http://www.dd-wrt.com/wiki/index.php/WOL
Then I downloaded the attached cab & its one click & works great!
RichTJ99 said:
I dont know if you still looking to do this but I got this working & figured I would reply here for future reference.
First i have a linksys DD-WRT router, so I followed these steps:
http://www.dd-wrt.com/wiki/index.php/WOL
Then I downloaded the attached cab & its one click & works great!
Click to expand...
Click to collapse
I have been using the WakeOnPocketPC from Depicus happilly with WM 6.1. Now, after upgrade to WM 6.5 (Dutty ROM Leo Holy Grail), the cab fails to install ("...installation was unsuccessful.")
Any other program with capability to send WOL packets to a particular IP address (and not just broadcast over LAN)?
Although this thread is about one year old, before I developed my WoL everywhere program, I searched for programs like mine here and came to this thread... None of the programs I've found fit my requirements, so I made a program myself...
So I hope your search is over and you've found what you need with my little WoL everywhere... you can download it here:
http://forum.xda-developers.com/showthread.php?t=695524
Greetings @ all!
LichtiMC
Create a shortcut to WakeOnLan with a MAC address
Hi,
I'm pasting to this old thread since I found the WakeOnLan tool here and want to share my tips with others.
If you want to create a shortcut so that you have a separate executable (say in your Start Menu) then follow these steps:
Install WakeOnLan from the above link. I put it in "\Program Files\WakeOnLan\WakeOnLan.exe"
Browse to this location with explorer on your PPC. Select the WakeOnLan executable and click "copy"
Browse to where you want the shortcut to appear:
"\Windows\Start Menu" will show in your start menu
"\Windows\Startup" will be run when you reset or power cycle the device
"\Windows\Programs" will apear in your Start Menu > Programs folder
"\Windows\Settings" will appear in your system settings
Select on some empty space (not an existing file) in your chosen folder and choose "Paste shortcut"
Use a text editor on Windows / Linux to edit this new file, or one on your device (I didn't have any that would open on my device so I copied it to Linux, edited in emacs, then copied it back)
Edit the line that looks like:
Code:
40#"\Program Files\WakeOnLan\WakeOnLan.exe"
essentially this is a character count, a "#", the location the shortcut points to, and arguments. Add your MAC address like this and take note of the quotes:
Code:
58#"\Program Files\WakeOnLan\WakeOnLan.exe" AA:BB:CC:DD:EE:FF
count the characters of the shortcut, mac address, and space, then add one. This is your new number (in my case, 58).
An easy way to do this is to use "wc" on Linux:
Code:
echo "\Program Files\WakeOnLan\WakeOnLan.exe AA:BB:CC:DD:EE:FF" | wc -c
57
(remember to add 1!)
Now you can repeat the process and paste as many different WoL shortcuts as you like! I've made just one and called it "WoL MythTv" to wake up my media centre at home. Neat
I'll post my sources in the next post since new users aren't allowed to post links...

[SOLVED] WinMo 6.5.X acting like 6.1 - cannot enter in menus

Help, I did something wrong and I sort of cant use the phone anymore.
I installed a topbar. Unluckly I didn't read the info about it, and that it was made for Win 6.1.
I cannot access the menu, thus I cant uninstall the topbar or hard-reset my phone. There's a key combinatiou that's "Camera + Send + Power Button" that resets it. Problem resides there; My cellphone have a touch sensistive Send button, and this instruction is for a similar phone which possess a hard Send button. I can still, however, make calls and answer, send SMS's and read emails and activate bluetooth or wifi, but I can't start any app (I cant open the menu) or use the Mobile Device Center to do anything through USB (I've set it to connect directly as USB Mode and not to ask), I'll look for a Bluetooth dongle today to try to connect it through bluetooth.
I'm desperate. This phone is brand new but I already have made esthetical and hardware changes, so I've voided the warranty. Also that's a China phone, even though this particular model is able to update the ROM, I don't have the original ROM or knowledge to backup the actual one.
Any help is accepted. If there's any trick to go into "Add/Remove programs" without accessing the menus or to use some software hack to hard reset it thru Bluetooth or Wi-Fi, I'll be glad to know. If that's for any usage, I have Total Commander installed on this phone and I know how to edit the registry, but I can't start it.
Sorry for my bad english, I'm from Brazil
Thanks in advance and I'm really counting on you guys.
I'll be awaiting for an answer.
P.S.: I've been thinking - I don't know - about installing SPB Shell with some Auto Installer by the Mobile Device Center (over bluetooth) and let it start automatically, and by there, uninstall the culprit. Fiddling around, I've learnt how to trick the Mobile Device Center to make it install any CAB automatically, as if I've ran an auto-installer. My question is: would SPB Shell start automatically?
P.P.S.: Everything is working if I find another way to start it. Just the "start menu" died.
P.P.P.S.: No, I can't buy another phone. It's expensive here.
You can try MyMobiler, a PPC controller running on PC.
OR Try to remove it in Mobile Device Center if you can connect to it.
I don't have Mobile Device Center, using ActiveSync in win Xp but I believe you can remove on your Pc the partnership with your phone so next connection will start a new partnership where you can change the settings which prevent you from connecting Usb normally. Once you are connected, copy the file attached to your device, then take blackppc's advice, install MyMobiler http://forum.xda-developers.com/showthread.php?t=499344 and navigate to the file, execute and it will open settings where you'll find remove function.
I hope it helps
That's the problem, I can't connect it through USB to Mobile Device Center because I've set it to autostart as "pendrive" and not ask me about if I want it to start like this or in Mobile Device Center compatibility..
I'll buy a Bluetooth dongle in 5 minutes by now and I'll tell ya what happened
--
I.. er.. bought the dongle, but I cannot configure it. It cannot find any of my devices or enter the dongle's configuration area. It works well enough, though, on the store computer. I've tested thru 2 Windows 7 Computers and it gave me the same error.. gosh
As I said, I don't have Mobile Device Center but there must be a way to delete partnership with your device... Try this link http://technet.microsoft.com/en-us/library/cc722321(WS.10).aspx or google these keywords "delete partnership Mobile Device Center" and see how.
Alright, I've managed to get the bluetooth dongle working (a Bluetooth service was disabled). Now I need to connect the phone to the Mobile Device Center. Problem is that I had connected it to MDC, but I had hard-reseted then, and seems like MDC finds the phone as a "new device", thus cannot connect over bluetooth. Can I force it to connect or something? I'm thinking that may be my only shot.
P.S.: I can access a sort of device explorer (when I put the USB cable in and out, it pops up a message asking if I want to see the Memory Card images, and then it opens a image viewer. I can delete folders from there, if that's of any use)
tito12 said:
As I said, I don't have Mobile Device Center but there must be a way to delete partnership with your device... Try this link http://technet.microsoft.com/en-us/library/cc722321(WS.10).aspx
Click to expand...
Click to collapse
"On the mobile device:
If you have never attached your device to the computer using a USB cable, do so. After Windows Mobile Device Center starts, disconnect the device.
In ActiveSync, click or tap Menu, then click or tap Connect via Bluetooth."
I cant reach it
I've got an GREAT idea: I can, still, acess the image viewer. From there, I can copy and move folders around. So, all that I have to do is to create a folder in my memory card called "Start", with one shortcut inside, leading to the "Add/Remove programs" or "Hard Reset" program and copy it to the Windows folder. Then I restart the phone and it'll fire up the selected app. JOB DONE.
I only need to know the name of the app/parameters for Add/Remove programs or Hard Reset. Basing on what Windows is, it might be some "xxxx.cpl -command".
I leave this job for you guys, now I feel that I can still save my phone!!
I'll try link it to Total Commander first, before anything
P.S.: I've found the following string to invoke the "Add/Remove programs" for Windows Mobile 6.1
"#ctlpnl.exe cplmain.cpl,23?\Windows\shell.dll,13"
Would it work for windows 6.5?
P.P.S.: Meh, I cant create fake shortcuts that leads to nowhere on the local computer. How can I do it?
What a relief, God truly knows. My method worked. I can invoke anything from the phone using a shortcut. I've used the following line for the shortcut:
"33#ctlpnl.exe cplmain.cpl,10"
It invoked the "Add/Remove programs"
Thanks for the help, I really felt you guys tried to help me
I never seen a case like mine, but who knows.
Here's what I did:
- Connected the USB Cable into the phone, and it started as a pendrive
- Created a folder inside the phone called "Start"
- Created a folder called DCIM and added some images in there
- Created a .lnk file using XXMKLINK (which makes links from anything I type)
- Copied the .lnk file to the "Start" folder
- Unplugged the USB. At this moment, a popup appeared on the screen "Do you want to view the images?" Press yes.
*If the above method doesn't work, you can try going into a SMS message, then click for "Insert a Picture". The same browser will open
- Go to the root of the SD Card, or anywhere the "Start" folder you've created is
- Press and hold it, select Copy
- Click on the left side button and select "Device"
- Go to Windows folder. It takes a while to open
- Copy your "Start" folder inside. Press Yes on any prompt
- Restart the phone.
Voilá! The app will be run on the next startup
I really hope to help someone with this trick, who knows more than it helped me.
The topic can be closed at any time.
Great news

Categories

Resources