Related
Some weeks ago I upgraded my i-mate PDA2k (Blue Angel) to WM2005 and then the problems started 1st - now it works twice slower; 2nd - the camera isn't working..... Can I downgrade back to 2003SE? And can you give me a link from where I can download it pls?
yep, it will downgrade.
do a search for the correct version.....i found one but cannot remember where it was...sorry.
as i said in another post, the problem can be getting the pda to format, once that is done, assuming you have read the 'how to's' and wiki, it is plain sailing.
i have the P3600 running WM6. I have setup the simple PIN password if device unused for 30 min, on two occasions after i power off and on my device, the device does not recognize the password i created. the ONLY work around is to do a HARD RESET and i lost all my data which is most frustrating.
this happened to me twice since i have the phone about 4 months now. i am running WM6, ROM version: 3.00.707.17, ROM date: 6/29/07
has anyone experienced this before? if so, is there a fix out there??
I'm having the same issue. It started happening when I installed A3XL's rom and now with Karmba's one, and it's anoying...
I had Mary's rom before and it never happened, so now I'm going to come back to this one.
Hi,
Same problem here! I use Trinity DOPODASIA WWE 3.00.707.18 6275 Radio 1.46.30.11_108 Ship ROM-image (from xda-Wiki).
At first I thought it had to do with installed programs, but even the pristine version does it...
Any help appreciated!
Greets, Leon Steyns.
[ Edited: after using my brains for once and looking on this site, I found an older thread dealing with the same issue: http://forum.xda-developers.com/showthread.php?t=317841&highlight=password Sorry! ]
Hi all
I upgraded mu phone with the official ROM image from HTC.
It happens that my phones switches off unexpectedly. It happened 5/6 times in the last week.
I have not installed any additional software.
Is anyone experiencing this same behaviour ?
Regards
hawk
hawk,
yes, it was the same problem after B&B, Vanilla and many other binaries from the forum. May be 1-2 times per day. At the moment I have original WM6 from one of the post. It likes me, stable and fast, without any additional useless soft like CUBE and other ****
But it opposite to your situation, you have a problem with original as well
i had the same problem i flashed my rom twice and its working like charm now just try to reflash it again!!! i used an official rom wm6 downloaded from wiki xda developers
After trying six or seven WM6.1-based ROMS from three different cookers (19199 and 19209), I'm starting to wonder if there's not something 'seriously' wrong with the WM6.1 base image.
I begins to strike me as some sort of duration-based memory degradation. My experience has been that runtime lasts between 2 and 48 hours before a hard reset is necessary. In my case, I pared my installs down to adding merely my password safe as the only add-on, and still it crashed.
The most interesting pre-crash was going to "Programs" and noticing the number of icon substantially reduced (...and reducing...), and the remaining icons as default program icons.
After about five days of fighting with these and trying different methods of extending runtime, I reloaded an older copy vp3G's 3.0.0 from last summer and haven't had a problem for the past 72 hours. In fact, I had no lock-ups with WM6-based, previously.
I'd be interested in other people's experiences with WM6.1-based ROMs on the Hermes...
- Marc
i may be wrong, but i think recall reading that flashing back to your stock rom, then flashin to 6.1 may fix some hard reset problems....
as for me, ive used 4 or 5 6.1 roms and havent experienced a hard reset.....my latest and favorite so far is faria's and dr.p's 6.1 rom, been running a week no hard reset...
im usin an at&t branded 8525
i was having a few issues with this but ended up changing radio versions from my standard 1.16 to 1.48.
havent had an issue since doing that.
i had the crash problem also, but after I not install htc cube in any of the wm6.1, everything ok and stable.
problem is with cube in wm6.1 i think.
Faria's is the best so far, but they all have problems to varying extents. Have you tried running Oxios Close apps? That will help you claim back memory and maybe help prevent the need for a hard reset. you can get it here: http://www.oxios.com/memory/
lupes5 said:
i may be wrong, but i think recall reading that flashing back to your stock rom, then flashin to 6.1 may fix some hard reset problems....
as for me, ive used 4 or 5 6.1 roms and havent experienced a hard reset.....my latest and favorite so far is faria's and dr.p's 6.1 rom, been running a week no hard reset...
im usin an at&t branded 8525
Click to expand...
Click to collapse
Interesting. I did notice that on some ROM flashes that boot screen retained a previous ROM's splash. That might mean that some ROMs are not including all facets (OS, Radio...Bootloader?) of the complete image. Will give that a shot now that I'm back to a stable WM6.
st3v3 said:
i was having a few issues with this but ended up changing radio versions from my standard 1.16 to 1.48.
havent had an issue since doing that.
Click to expand...
Click to collapse
Radio is 1.45 with vp3G 3.0.0. Will check again after a Faria re-flash and upgrade to 1.48 if it isn't included.
fizzy15 said:
i had the crash problem also, but after I not install htc cube in any of the wm6.1, everything ok and stable.
problem is with cube in wm6.1 i think.
Click to expand...
Click to collapse
I had that thought too, but my last ROM didn't include any of the HTC apps, at all, so I think it's some conflict or something lower level. The cube 'is' a resource hog, however...
hamster0914 said:
Faria's is the best so far, but they all have problems to varying extents. Have you tried running Oxios Close apps? That will help you claim back memory and maybe help prevent the need for a hard reset. you can get it here: http://www.oxios.com/memory/
Click to expand...
Click to collapse
The resets are always due to hard lockups, and they can be with only Activesync running as an application. I try to keep the number of running apps at a minimum for reasons that are probably fairly obvious to all here...
you are not alone...
http://forum.xda-developers.com/showthread.php?t=376211
Im also having the same problem .. all sorts of experiments has been done to test on why WM6.1 crash when I install them .. but 1 thing i noticed that it always hang before softreset that eventually lead to hardreset .. i thought hardware accelerations problem ... so what i do is .. every WM6.1 i changed to 8mbpp .. until now my machine ok.
My2Cents.
-/Abid.
Flash to stock rom then to wm 6.1... Apparently there is a problem if you flash from big storage rom to wm 6.1(not sure why this is so) but there have been a huge number of people who say this works for them, myself included.... I tried every wm6.1 rom that came out then doing something stupid eflashe stock os. No problems with wm 6.1 since. Also I believe that 19209 is somewhat more stable than versions 19199 or 19202... I'm using PDAViets 19209 rom,just changed to black edition, and have had NO trouble EVER since installing it when it first came out, no soft resets and more importantly, no hard resets... Cheers
milleniumbug89 said:
you are not alone...
http://forum.xda-developers.com/showthread.php?t=376211
Click to expand...
Click to collapse
Yep, sounds like the same behavior I'm seeing. Soft lock, reset, soft lock, reset, hard reset...lose data... (rinse and repeat)
fix
http://forum.xda-developers.com/showthread.php?t=381959
follow those instructions and your problems will be solved.
I have the same problem! Tell schaps so in his next rom he may fix this serious problem
Shadow CE 6.1
chronosxx said:
After trying six or seven WM6.1-based ROMS from three different cookers (19199 and 19209), I'm starting to wonder if there's not something 'seriously' wrong with the WM6.1 base image.
I begins to strike me as some sort of duration-based memory degradation. My experience has been that runtime lasts between 2 and 48 hours before a hard reset is necessary. In my case, I pared my installs down to adding merely my password safe as the only add-on, and still it crashed.
The most interesting pre-crash was going to "Programs" and noticing the number of icon substantially reduced (...and reducing...), and the remaining icons as default program icons.
After about five days of fighting with these and trying different methods of extending runtime, I reloaded an older copy vp3G's 3.0.0 from last summer and haven't had a problem for the past 72 hours. In fact, I had no lock-ups with WM6-based, previously.
I'd be interested in other people's experiences with WM6.1-based ROMs on the Hermes...
- Marc
Click to expand...
Click to collapse
Use Shadow CE 6.1's rom .. I have been using it for months, and it is near flawless. Do it, you won't regret it . I've tried everything else .
Fix works...
raidzx said:
http://forum.xda-developers.com/showthread.php?t=381959
follow those instructions and your problems will be solved.
Click to expand...
Click to collapse
After trying almost everything to get more than a few hours of runtime out of WM6.1, I followed the above instructions to the letter and WM6.1 has worked for 24 hours now (yes...a new record). I will update in a few days if the Hermes/Faria 6.1 combo continues to function.
One note: I was not able to use Vista to update to Hard-SPL after the Stock AT&T 6.0 ROM re-flash. Each attempt resulted in an updater error on the PC after the handheld entered bootloader mode. Did the same procedure on XP and it worked flawlessly.
Hey. Had the same problems but i solved it with flashing a AT&T Stock Rom first.
Now my Hermes with PDAVIET B&C WM6.1 Rom running like a flash
Without any freezes.
here is the link to my problem thread:
cu
poPY
raidzx said:
http://forum.xda-developers.com/showthread.php?t=381959
follow those instructions and your problems will be solved.
Click to expand...
Click to collapse
Sorry, but following those instructions does NOT solve my problem. It does for some, but not all.
What works for ME, is to turn off the Storage Card power saving.
gregma said:
Sorry, but following those instructions does NOT solve my problem. It does for some, but not all.
What works for ME, is to turn off the Storage Card power saving.
Click to expand...
Click to collapse
I will update the thread with your information, thanks!
HI
i have kaiser 130
I tried few diffrent android version but with evry version phone cant connect to network sometimes he connects for few minutes but not longer. With windows everything ok
I tried:
Incubus26Jc's Super Eclair Lite 2.1
Warm Donut RLS 5 with Kaiser updates integrated including battery
Im using
HardSpl 3.34
radio 1.70.19.09 (tried 1.70.18.02)
Protocol 25.83.40.02h
Maybe someone had same problem and can help me?
Sorry for my english.
i just checked i was editing nbh for Warm Donut RLS 5 with Kaiser updates integrated including battery
and i was using esclair not donut. (dum) Maybe in this is problem....
I has the same problem too ,waiting somebody give a method to solve this
Have you tried an older radio, such as 1.65.21.18?
No because in guide:"How to replace Windows Mobile with Android (Guide)" (sorry i cant paste link because im new user) is recommended 1.70.x and better here it is "#2 Does your Kaiser have a relatively new radio rom? If not then get one. Recommended to have 1.70.xx.xx and up. "
if it is radio fault so why on winMO with same radio working?
And one more thing kaiser with android finds not 02 but BTCellnet (in the beginning O2 was BTCellnet )
The same radio suggestion was made to me several days ago while trying to get audio working in android (via HaRET). Upping to 1.70.xx didn't fix my issues, but 1.65.xx did.
If you are able to test it in WM, you must still have WM installed. Are you booting android with HaRET?
No i think HAret if you installing to sdcard but im installing not in sdcard.
im doing all by this guide go here to read.
xda-developers > HTC Kaiser: Tilt, TyTN II, MDA Vario III > Tilt, TyTN II, MDA Vario III Android Development
> How to replace Windows Mobile with Android (Guide)
Yes, I know the sticky thread to which you have now twice referred. I am asking how you know wifi works in WM if you have replaced WM with android as the guide leads you to do.
There is no danger it trying an older radio regardless of what the guide suggests. I would respectfully suggest that you give 1.65.xx a shot, despite what the guide says. If the older one works, then you have solved your problem. If it doesn't work, you can flash 1.70.xx back on and try something else.
I am running Incubus's Super Eclair on my device and wifi works flawlessly. I am also able to do BT connections and hear audio. None of these worked when I tried 1.70.xx, so I use 1.65.21.18 instead.
em not wifi iwth wifi every thing ok but mobile newtwork dosent work
Roger that. My recommendation still stands, however.
Trying the alternate radio will take you less than 5 min total including d/l time. You can find it linked in post #3 of this thread: forum.xda-developers.com/showthread.php?t=393182.
You could also try 1.71.09.01, which I see was posted several days ago.
thx m8 its working! just signal strength is bad but still....it works! one more time thank you m8!
m8?
What was your solution?
i have a similar problem. Cannot connect to the internet with 2g/3g, but wifi works. The latest rom did not solve my problem. Maybe i'll try older ones...
hi @all,
any news here?
I got the same problem.
At the moment I have running the version milanche has upped, because I thought it is running for him, so maybe it does also for me. but it doesn't.
forum.xda-developers.com/showpost.php?p=6570064&postcount=7
(sorry, as a new user I can't make a link out of this)
Everything seems to be fine except mobile internet.
Edit:
Maybe I should inform you that I already have edited my APN-Settings. And I really think they should be ok. On WM6.1 these settings are working.
And I like to mention that I'm booting from SD.
Kernel may be ?...
Same problem with my phone. I have installed Froyo as explained in another post on my Kaiser TyTNII and everything works perfect except the phone network. I tried already around 5 diferent radios, with NO results.
Do anybody think this issue may come from the kernel instead ?
Using the "kaisimg-panel2-240x320-2.6.32-tilt-froyo-06-09-10_22.nbh" on my phone.
Thank you.
I have a problem with an i-mate K-JAM ... Some time ago I got this ppc but I went I installed a program and got stuck. Windows and the currency we now find no signal at all looking and looking and still not know what does. please help me
orcatrainer said:
Same problem with my phone. I have installed Froyo as explained in another post on my Kaiser TyTNII and everything works perfect except the phone network. I tried already around 5 diferent radios, with NO results.
Do anybody think this issue may come from the kernel instead ?
Using the "kaisimg-panel2-240x320-2.6.32-tilt-froyo-06-09-10_22.nbh" on my phone.
Thank you.
Click to expand...
Click to collapse
same issue.APN data not working
Incubus26Jc's Super FroYo RLS15
radio 1.65.16.25
kaisimg-panel2-240x320-2.6.32-tilt-froyo-09-09-10_21.nbh
possible solution
I,m started MODEM application,tapped Connect-and looks like APN now working!
Let's see how long it works for you. I have the same setup as orcatrainer but mine works off and on some times. I must add, I have Simple Mobile. They are on the T-mobile network therefore, I cannot access 3G on my tilt. Playing with the 2G setting usually cause my phone to connect to APN until I turn the phone off. Then I have to struggle to get it to work again. I just put my sims back into my Blackjack 2 to access mobile data until this issue is fixed.
illegal2008 said:
I,m started MODEM application,tapped Connect-and looks like APN now working!
Click to expand...
Click to collapse
Hi there, I don't understand well what you did on your phone which made it work. Under which section you can find "modem" application ?
Thanks.
orcatrainer said:
Hi there, I don't understand well what you did on your phone which made it work. Under which section you can find "modem" application ?
Thanks.
Click to expand...
Click to collapse
in applications section-not in settings