Some weeks ago I upgraded my i-mate PDA2k (Blue Angel) to WM2005 and then the problems started 1st - now it works twice slower; 2nd - the camera isn't working..... Can I downgrade back to 2003SE? And can you give me a link from where I can download it pls?
yep, it will downgrade.
do a search for the correct version.....i found one but cannot remember where it was...sorry.
as i said in another post, the problem can be getting the pda to format, once that is done, assuming you have read the 'how to's' and wiki, it is plain sailing.
Related
Has any one managed to update an imate PDA2K with the latest rom. I have tried the up date trick in the forum
[CHECKCEID_TYPE]=1
But I stll get a Country ID Error?
Hrlp
I have upgraded my XDA 2s from o2's original FW to I-MATES latest,
It took several attempts! I kept getting ID error 212212122 kind of thing.
I then tried a USB 2 computer as my USB 1 comp wasn't cutting it and kept resetting the machine half way through :/ thought i'd turned it into a brick, but once i'd tryed it 3 times on USB2 it finaly worked! And I had to add the extra line that you did as well, keep trying
Make sure you know what your Original Firmware is! otherwise you'll be trying to install the wrong FirmWare or ROM update.
Check the wiki, beginners section, search my posts.
I'm now running I-Mate latest FW. its ten times better than O2s old one!
best I can do hope this helps. choppidge.
Upgrading iMate to Latest O2 Rom
Thank you for the advice. Did you upgrade from iMate to 02 or O2 to iMate?
My machine is a USB 2 machine and no matter how may time I tried I got the country ID error.
In the past I have managed to update my iMate to the O2 Rom with previous versions, but when I have tried to update my iMate with the latest ROM I get the Country ID Error -12121212 etc.
Has any one manage dto put the latest O2 Rom on an iMate Blue Angel?
If so please tell me how.
You need this ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip
put it in your upgrade folder and round it , should be no problem , I did o2 to I-mate and Dopod to I-mate n times already.
if got the error on the 1st run with the no-id, run the no-id 4 the 2nd time, it works 4 me, i've flash my pda2k to o2 1.40.00 WWE :lol:
:roll:
i made : light power reset but it tell me erorr country id
why?
:roll:
use the MaUpgrade_noID.exe to start the upgrade. It is available from the ftp section of this site. I did this yesterday and it worked first time
Hi Weasel, what do you think of the Qtek ROM? I recently changed from the O2 ROM to the Imate version, would be interested to know what you think are the Pros and Cons of your latest ROM?
Thanks
Phil
Hi
I have just gone through the update process (to UNI_QTEK_13077_176_10900_WWE_Ship.exe) with my xda exec as I was on the latest o2 rom and I followed the instructions here:
http://wiki.xda-developers.com/inde...tion On How To Upgrade with Bootloader method
The bit I hadn't picked up before was the .nbf files have to be in the same directory as the rest of the update and MaUpgradeUt_noID - I deleted the radio version witin the folder (radio_.nbf_) and then pasted in the 1.0.9 one which I downloaded speratly - hit MaUpgradeUt_noID and everything completed within 30 mins or so.
The xda is like a new machine compared to the old o2 rom I was on as it's soooo much quicker.
Oh i was worried about not having my o2 settings but if you download this cab file and run this cab[/url after you have finished setting it up on qtek rom you get all your setting back for o2 (choose basic when using cab not corporate as that doesn't seem to work!
Hi Andy, what do you think of the Qtek ROM? I recently changed from the O2 ROM to the iMate version, would be interested to know what you think are the Pros and Cons of your latest ROM?
sorry for the delay in responding:
My first impressions of the QTEK ROM were fine but.... on Sunday, the phone just stopped working completely - no signal etc. Hard reset was required to get it working again. I've disabled error reporting and will load my software back on later today.
Chris
Hi, I got my Qtek S200 aka iMate Jamin yesterday and I tried to do a ROM upgrade. I followed the instructions given in the website http://kimpeacocke.blogspot.com/2006/06/how-to-perform-rom-upgrade-on-your-i.htm l
I got the upgrade from this site at ftp://xda:[email protected]//Uploads/Prophet/Prophet-roms/RUU_Prophet_2 151327_22113102_022021_Dopod_PDAMobizEdition_v101.zip
I followed the procedure given in the website given above. After I upgraded successfully everything on the phone was wiped out. Since there was no instruction to backup the files, I did not do it. Now all that I see is a four colored screen saying RUU in the top right corner, IPL 2.09 in the top left corner and SPL 2.09 below it.
Does anyone know how to get my phone working again? Do I have to install all the applications including windows mobile 5.0?
If yes, please tell me where to get the softwares for the Qtek S200 and info on how to install it.
Thanks in advance.....
same problem !
Hi !
I unfortunatly experienced the same pb with my XDA Mini S (four color lines etc...), so kindly give me a shout may you find any solution! I will proceed same
Cheers
Heriniaina
Hello to all
i've tried different WM6 Roms but i'm noct convinced to use it yet.
That's why i'm trying to find a way to downgrade to WM5.
I know that there are several how-tos but none worked yet.
I already tried the opposite way via uspl to downgrade. no success yet.
WM5 Rom is here, when trying to downgrade i get the error message 260 which means no connection to the device. i'm using the same machine for downgrading as for upgrading, nothing but the Rom on the phone has changed.
Currently i'm using the o2-xda-orbit german rom.
If anybody has a clue what to do to get the old stuff back, thx in advance
blue
You can downgrade your O2 Orbit successfully if you have Original German ROM (WM5) which is available somewhere in this forum. I can't remember which thread but if you do some search I am sure that you will find it.
I have just found Original German O2 Orbit ROM here : ftp://xda:[email protected]/Uploads/Upload/Official XDA Orbit ROM
Thank you for your answers!
I own a HTC P3300 Artemis.
Using USPL and the original o2 german wm6 rom i flashed it with WM6.
I already downloaded a german wm5 rom, my problem right now is that i cannot by any unknown circumstances get this rom on my phone.
No matter whether i use uspl before trying to flash the original rom or if i don't use uspl the result remains the same.
The update utility keeps telling me that it is not possible to connect to my smartphone.
Active Sync/ Mobile devices center connection is working fine though.
Greets blue
You can try with this Original HTC Artemis WM5 ROM here : http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Let us know if this help you.
Thy to all, i made it!
Main problem seemed to be my os!
even though i already flashed using vista as os this time it didn't work out.
I used my other computer running xp and it worked on the first run!
greets blue
... hear that
i recognize that problem... even though i always sync with my laptop (Vista) i use another com (XP) to flash..
Don´t know why but it seems alot have experienced this prob.
I have bought a htc3300 from a dealer that i find at skroutz but after 1 day i had lost the 2nd language keyboard so i took it back to the dealer to fix the problem he said that wm6 is free to upgrade so let passed it but he put the touch htc software that don't work good how can i downgrade to wm5 again please help it's only 2 days mobile !!!!
well after many pockets of tobaccos i fix it with the Original HTC Artemis WM5 ROM here : http://rapidshare.com/files/19322112...0_WWE_SHIP.rar thanxs very much it finds the image version of htc touch and make a downgrade that was that the upsl cannot do ,the upls reload the same version that had before maybe because it didn't know the previus
Humm??
The UPLS is not a ROM??
When you run UPLS it sets the CID registration, so you can flash any ROM you want - but offcouse you still have to get the ROM
you 're right after upsl you can downgrade or upgrade... many tnx for info...
HTC P3300
can´t dowgrade wm6 to wm5 after 2 percent it return with a error
ERROR [244] : INVALID MODEL ID
rom image HTC_1.12.405.01_026790_WWE_SHIP.rar
help
++++++++++help++++++++++
For French User, i'd Upload an Official Operator Orange Version here :
ftp://xda:[email protected], Original ROM Fr) pour M650_0407.rar
Direct Download here :
http://www.mobilite.fr.orange-business.com/public/oev4/html/fr/pme/mobiles/ba/dl.php?mi=164&pi=2580
Hello all...
I've seen LOADS of questions relating to this particular model and upgrading to WM6, both on this forum and throughout the web.
I followed instructions from here, but alas I couldn't get the PDA to accept the new ROMs for various reasons. (I.e. ROM Sink Mismatch, Incorrect Model, Incorrect Version).
I then found this page burried in the links of the above thread, and tried the WM6 upgrade from it... I don't know if it's the PDA4 or the PDAViet ROM (or another altogether), but the big thing is: it works! Bluetooth, WiFi, Battery Indicator, Activsync... everything I can find to test works.
Now... I had originally got Windows Pocket PC 2003 with the device... I upgraded to WM5 using the official "WM5 Upgrade" from the HP UK website... I updated the firmware and drivers for WM5 from the same site, then I applied the WM6 ROM from the link above in White Boot loader mode.
One quick restart later, and now it's working...
So, thanks to all from the massive thread, thanks to the person who made that site, and thanks to whoever made the ROM
Loq
HX2750, WM6.5 Bluetooth Radio Problems
Hello,
I've installed Spaaitjies WM6.5 V4, and trying to run TOM TOM 7 on my iPAQ HX2750, I find that the Bluetooth Radio cannot be turned on. The error message that pops up reads:
"The Bluetooth Radio failed to turn ON due to insufficient driver memory available. You must perform a normal rest before you can turn ON the Bluetooth Radio"
So, naturally I've reset the device (soft & hard) but the issue remains. Can anyone advise what I might try next?
Many Thanks,
Gareth