Related
Does anybody have a copy that I can have which involves not messing with and that I can flash to my XDAIIs with no country error and no o2 stuff on it so it looks like the i-mate :?:
erm...................no
1.read the wiki
2.read the wiki
3.read the wiki
if above dosnt work try contacting your doctor about your brain......
lol, yeah, please read the wiki, you cannot go wrong, just follow the simple instructions, dont worry, you WILL be fine, if you get a country error then dont worry about that either, just keep trying, 8)
we have faith in you man!!!
8)
Dude do what this say's.
I've just done it: UK XDA IIs, on Orange network, running i-mate 1.40 ROM.
Slightly going OT...
I am quite keen to do the upgrade from my standard O2 XDA2s 1.31.00 WWE ROM, but I am a little unsure on what 1.40 ROM to download from WIKI. I think I need:
i-mate 1.40.176
I know my device is a Blue Angel, Rom as above, extended ROM as 1.31.139 WWE
Can anyone confirm the correct download please?
Also, has anyone had any problems installing on XDA's the same as mine?
I have read the install tutorial, but would like to get an idea of if I am going to run into problems.
Oh, one more thing... What advantage does ROM 1.40 have over my existing ROM apart from bug fixes (oh please! daily lockups!!!)?
Many, many thanks.
O2 XDAIIs Upgrade
I used the i-mate 1.40.176 upgrade for my O2 XDAIIs. All in all its pretty stable, with only the Bluetooth stability (memory issues and BT Manager & Settings "disappearing") as the main issue. Much better than the O2 1.31 ROM (will they ever get that 1.40 update out...!?) You will need to use the "MAUpgrade" rather than "BAUpgrade" utility, as the 1.40.176 ROM was built for the i-mate rather than the xda2s.
One problem I did have with this ROM at the start, was that GPRS would not stay connected. This seems to be a sporadic problem among those that upgrade, but if you experience it after upgrading to this ROM, you can correct the problem by replacing the "CallerID" cab in the extended ROM with the older version (1.17) This version of the file is available on wiki also. This will involved unhiding and unlocking the Extended ROM and replacing the file. Look at the wiki instructions under Blue Angel for "Cooking Your First Extended ROM" That said, you may not experience this problem, so upgrade the ROM first and see how it goes.
All in all a much better ROM. I am trying the new O2 Asia WWE ROM with a modified extended ROM and this is also pretty good. Slighty better Wi Fi switch on and off in my opinion. This one is on wiki also, but you will probably need to "cook" the extended ROM here a bit more than the 1.40.176 version.
Hope this helps
Chris
Anybody tried the imate 1.40 rom on O2 XDA IIs purchased from Singapore?
I am facing problems to using any 'Today Plug-ins' like IP Dashboard, O2 Plus beta, Lexisgoo English dictionary etc. The problem is after say 30 minutes or after more, my keyboard input will only be selectable, cannot select CE-Star chinese keyboard or Intellipad.
What do I have on my O2 XDA IIs?
1. CE-Star
2. Intellipad and Intellidialler
3. Lexisgoo English dictionary
4. SKTools
5. Sprite backup standard
6. Cal89A calculator
7. MDict 1.21
and many more.
Please help anyone.
Thanks.
my exerience with this device and all the ROMS has been that the fewer Today plugins you have the better. SPB Pocket Plus V2.5 caused a lot of lock ups. Not sure about new version 3.0 Seems multiple Today plug ins cause conflicts. Hard to pinpoint all the interactions and what affects what... Not much help I am afraid :-[ I would just try to keep them to a minimum.
Regards
chris
You said it man!
I'm down to zero 'Today Plug-ins' now and it seems to keep my IIs from needing to 'soft reset'.
Any others from Singapore who had used the Imate 1.40 rom?
Two major problems that I am facing with 1.40 ROM include:
1. wifi can't be connected after disconnecting GPRS.
2. bluetooth problem (memory error) or storage card disappear after disconnecting BT.
Anybody experience these?
Cheers,
zard said:
You said it man!
I'm down to zero 'Today Plug-ins' now and it seems to keep my IIs from needing to 'soft reset'.
Any others from Singapore who had used the Imate 1.40 rom?
Click to expand...
Click to collapse
Me !!
I had used the Imate rom before but, there has been many casses of terrible lag. When i updated to 1.40 and radio to 1.13 wooo... just very very fast...
Installing the latest Pocketplus with my 1.40 ROM makes my device hard-reset itself.
I need a way of getting IE to be able to save pictures. Anyone know of an alternative way to do this?
I have no problem with pocketplus 3.0.
Which version you are using?
1.40 ROM has serius today screen problems with me too (That's why I still use 1.31).
I have no problem with pocketplus 3.0.
Which version you are using?
Click to expand...
Click to collapse
My ROM configuration is in my sig.
The SPB pocketplus version is: v3.0.0.3652
I really want the mods it offers. (particularly 'save picture as' in IE).
Dear all,
I am a newbie to the forum so if such problem has been posted before, please forgive me.
Since the first issue of WM6 regardless of different versions (eg. XDA Live, WM Black or LVSW), I found that my radio has some problems. When I try to make a call, my Hermes will often appear the message "the operation failed" and then it tries to refresh it signal.
Many of my friends complained that they couldnt find me. The truth is my Hermes seems like normal, but actually it has no signal received from the operator. I often have to do a soft reset to make my Hermes to be normal again.
Before upgrading to WM6, I was using WM5 AKU 3.3 test rom with Radio 1.27. After upgrading to WM6 (different versions), I tried radio 1.27, 1.34 and 1.38 respectively but none of them solved my problems.
Can anyone help me? thanks in advance!
Hi there,
I read the forum for some days now and did learn quite a lot. Unlocked my T-Mobile MDA Vario II, flashed HardSPL, and also a new WM6 Rom. Since I'm on Vista i have some Problems now. After the WM6 Rom was on the Device Vista detected a new Mobile Device and now Mobile Device Center from Vista is freaking out, sometimes it detects my phone, sometimes not. I pressume because of WM6, since with WM5 on the Phone i didn't have these Problems..
Anyone knows something about that?
Another thing is, i really would like to have a german wm6 rom, but the Tool to convert a .nb to a .nbh file i found in the Wiki (Koch) doesn't seem to work in Vista, i always get an compiler error when i load the .nb file. Are there any other Tools or could someone here maybe just build me a german rom with Vodafone OEM stuff and convert it for me?
regards,
nEUTRon
You really need to read mrvanx guide, look at my signature.
nEUTRon666 said:
Hi there,
I read the forum for some days now and did learn quite a lot. Unlocked my T-Mobile MDA Vario II, flashed HardSPL, and also a new WM6 Rom. Since I'm on Vista i have some Problems now. After the WM6 Rom was on the Device Vista detected a new Mobile Device and now Mobile Device Center from Vista is freaking out, sometimes it detects my phone, sometimes not. I pressume because of WM6, since with WM5 on the Phone i didn't have these Problems..
Anyone knows something about that?
Another thing is, i really would like to have a german wm6 rom, but the Tool to convert a .nb to a .nbh file i found in the Wiki (Koch) doesn't seem to work in Vista, i always get an compiler error when i load the .nb file. Are there any other Tools or could someone here maybe just build me a german rom with Vodafone OEM stuff and convert it for me?
regards,
nEUTRon
Click to expand...
Click to collapse
Uhm.. ?!?! I did, else i couldn't install a WM6 Rom. My Question was about the connection issues AFTER upgrading to WM6 and about a GERMAN wm6 rom i can't build myself because of vista, so ?! There's nothing on the mrvanx site that could help me with these 2 issues, or am i blind?
nEUTRon666 said:
Uhm.. ?!?! I did, else i couldn't install a WM6 Rom. My Question was about the connection issues AFTER upgrading to WM6 and about a GERMAN wm6 rom i can't build myself because of vista, so ?! There's nothing on the mrvanx site that could help me with these 2 issues, or am i blind?
Click to expand...
Click to collapse
I must learn to read properly! The problem is caused because the device centre sees it as a new device, it would be best to uninstall the device centre and reinstall it that should sort it. In regards of the tools problem I know of nothing to fix this, I have to run mine on XP it is the only way.
Damn...Thanks anyway. So i have to make my rom when i'm back at office with some XP machine
I have the same problems with Vista detecting my phone. I sometimes have to plug and unplug it three times before it detects it. Also, it seems to work best for me with the option "Enable advanced networking functionality" unchecked in Settings | Connections | USB to PC.
Hello to all
i've tried different WM6 Roms but i'm noct convinced to use it yet.
That's why i'm trying to find a way to downgrade to WM5.
I know that there are several how-tos but none worked yet.
I already tried the opposite way via uspl to downgrade. no success yet.
WM5 Rom is here, when trying to downgrade i get the error message 260 which means no connection to the device. i'm using the same machine for downgrading as for upgrading, nothing but the Rom on the phone has changed.
Currently i'm using the o2-xda-orbit german rom.
If anybody has a clue what to do to get the old stuff back, thx in advance
blue
You can downgrade your O2 Orbit successfully if you have Original German ROM (WM5) which is available somewhere in this forum. I can't remember which thread but if you do some search I am sure that you will find it.
I have just found Original German O2 Orbit ROM here : ftp://xda:[email protected]/Uploads/Upload/Official XDA Orbit ROM
Thank you for your answers!
I own a HTC P3300 Artemis.
Using USPL and the original o2 german wm6 rom i flashed it with WM6.
I already downloaded a german wm5 rom, my problem right now is that i cannot by any unknown circumstances get this rom on my phone.
No matter whether i use uspl before trying to flash the original rom or if i don't use uspl the result remains the same.
The update utility keeps telling me that it is not possible to connect to my smartphone.
Active Sync/ Mobile devices center connection is working fine though.
Greets blue
You can try with this Original HTC Artemis WM5 ROM here : http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Let us know if this help you.
Thy to all, i made it!
Main problem seemed to be my os!
even though i already flashed using vista as os this time it didn't work out.
I used my other computer running xp and it worked on the first run!
greets blue
... hear that
i recognize that problem... even though i always sync with my laptop (Vista) i use another com (XP) to flash..
Don´t know why but it seems alot have experienced this prob.
I have bought a htc3300 from a dealer that i find at skroutz but after 1 day i had lost the 2nd language keyboard so i took it back to the dealer to fix the problem he said that wm6 is free to upgrade so let passed it but he put the touch htc software that don't work good how can i downgrade to wm5 again please help it's only 2 days mobile !!!!
well after many pockets of tobaccos i fix it with the Original HTC Artemis WM5 ROM here : http://rapidshare.com/files/19322112...0_WWE_SHIP.rar thanxs very much it finds the image version of htc touch and make a downgrade that was that the upsl cannot do ,the upls reload the same version that had before maybe because it didn't know the previus
Humm??
The UPLS is not a ROM??
When you run UPLS it sets the CID registration, so you can flash any ROM you want - but offcouse you still have to get the ROM
you 're right after upsl you can downgrade or upgrade... many tnx for info...
HTC P3300
can´t dowgrade wm6 to wm5 after 2 percent it return with a error
ERROR [244] : INVALID MODEL ID
rom image HTC_1.12.405.01_026790_WWE_SHIP.rar
help
++++++++++help++++++++++
For French User, i'd Upload an Official Operator Orange Version here :
ftp://xda:[email protected], Original ROM Fr) pour M650_0407.rar
Direct Download here :
http://www.mobilite.fr.orange-business.com/public/oev4/html/fr/pme/mobiles/ba/dl.php?mi=164&pi=2580
Hi all - sorry about this, but I'm new to this. Got an Orange M700 - still running the original Orange branded WM5 OS: yup, Orange have mangled it. I've been reading the (many...many...many) threads and the wiki and... well I think I'm more confused than ever.
So, just wondering if someone can advise me on the best route to upgrade, and bear in mind I'm a graphics guy....
So, briefly
from the Orange WM5, is there a straight one-step upgrade to WM6?
What .cabs/versions should I be looking for? -> I know there are many you guys have tuned. I guess I'm looking for a fairly standard one? Unless you think otherwise!
Are there any major caveats (other than warranty/support invalidation)?
Need a little hand-holding...
Thanks in advance.
Hi, welcome..
I have M700 too, took the plunge a while back and loaded one of Mun's ROM's.
All I did was install activsync onto my pc and hook up the phone for the first time, once that ran its course I unplugged the phone powered down and removed the sim & sd card and then powered back up again.
Once up n running I plugged it back into the pc and ran the rom I had chosen, yes I was worried it might go wrong but I have to say it was and is very simple n straight forward. There is a WM5 Orange backup rom on here so if you ever did need to send back then you can flash this back onto the phone so it "looks" normal, tbh I'd doubt it would come to that.
I was using XP-SP2 at the time, not sure of anything different for Vista but that's where others here will put you straight, since then I have altered rom many a time and finally settled for Tom's Black'n'Blue - nice and fast and room to add what I want to add rather than be given. Oh and also update the radio rom to the latest version too, pretty much the same method.
Have a look at the roms and decide what you want Happy modding...
Only "gotcha" try and flash from XP, it is rumored to be problematic on a vista PC.
Also be warned flashing ROMs can be addictive, think i have tried 8 or 9 on my Trinity to find one i like, have yet to try the MUN one suggested in the previous post, looks like it will be next.
Ah, twas an early Mun rom and was WM5 - like I said the very first rom I'd flashed so I wouldn't flash to that now
Also realised why i hadn't tried it, i have tried several 6.1 ROMs and none of the WM6 ones. Probably will now i think about it though.
spv m700
Just joined the forum, thought I'd say hi.
I've just bought an spv m700 (following 2 years of the great spv m600), mainly because I wanted inbuilt gps.
The previous owner flashed it with Windows Mobile 6.1, I've yet to really test it.
First of all, I'm going to re-install all my Spb software (spb time, spb backup, spb mobile shell, etc) and transfer contacts etc via active sync.
If anyone has any advice or tips n tricks that you feel may benefit me, I'm all ears.
Cheers,
Matt.
Mattster_spv said:
Just joined the forum, thought I'd say hi.
I've just bought an spv m700 (following 2 years of the great spv m600), mainly because I wanted inbuilt gps.
The previous owner flashed it with Windows Mobile 6.1, I've yet to really test it.
First of all, I'm going to re-install all my Spb software (spb time, spb backup, spb mobile shell, etc) and transfer contacts etc via active sync.
If anyone has any advice or tips n tricks that you feel may benefit me, I'm all ears.
Cheers,
Matt.
Click to expand...
Click to collapse
First of all, welcome!
You have to know that the key to knowledge is searching, reading, and if none of those work, asking through posting!
So, happy enlightment and enjoy your device!
OK Monkeybox - hold out your hand - here's mine.
First thing - choose a ROM (sorry, you'll need to make your own choices). Judging by what you have said a LITE ROM would suit your needs.
I have tried most trinity ROMS. I like ADW's ROMs, am currently on Akeo's ROM but have tried LVSW, mUn, black and blue, PDAVIET, FInixNOver, ervius etc etc etc (Sorry if I've tried and forgotten your ROM!). Once you have your ROM, you should unlock the phone
1. (Hard-SPL - Service Providor Lock). http://forum.xda-developers.com/showthread.php?t=299659 This will enable you to flash a ROM with different carrier ID to you SPV M700. OK - Once you have hard-spl'd your phone, find the RUU (Rom Update Utility) exe file within the ROm that you downloaded.
2. Connect your phone (windows XP is best) using activesync and when activesync is connected, run the RUU Updater. The phone will switch off and go into "bootloader" (coloured bars on screen). If you get a connection error here, just run the RUU updater again. this time things should get going. When finished - your new ROM is installed - no more Orange!
3. Next update the Radio - search xda-developers.com using google for Trinity Radio - and choose 1.46 or 1.5x.
4. Install missing software (generally you'll need a GPS navigation software at least).
5. Enjoy.
6. If you like a ROM - donate to the cooker
7. Get a flashing addiction
8. Read all of the Kitchen threads
9. Cook your own ROM
10. Share it with us
11. Be eternally happy
nealed said:
OK Monkeybox - hold out your hand - here's mine.
First thing - choose a ROM (sorry, you'll need to make your own choices). Judging by what you have said a LITE ROM would suit your needs.
I have tried most trinity ROMS. I like ADW's ROMs, am currently on Akeo's ROM but have tried LVSW, mUn, black and blue, PDAVIET, FInixNOver, ervius etc etc etc (Sorry if I've tried and forgotten your ROM!). Once you have your ROM, you should unlock the phone
1. (Hard-SPL - Service Providor Lock). http://forum.xda-developers.com/showthread.php?t=299659 This will enable you to flash a ROM with different carrier ID to you SPV M700. OK - Once you have hard-spl'd your phone, find the RUU (Rom Update Utility) exe file within the ROm that you downloaded.
2. Connect your phone (windows XP is best) using activesync and when activesync is connected, run the RUU Updater. The phone will switch off and go into "bootloader" (coloured bars on screen). If you get a connection error here, just run the RUU updater again. this time things should get going. When finished - your new ROM is installed - no more Orange!
3. Next update the Radio - search xda-developers.com using google for Trinity Radio - and choose 1.46 or 1.5x.
4. Install missing software (generally you'll need a GPS navigation software at least).
5. Enjoy.
6. If you like a ROM - donate to the cooker
7. Get a flashing addiction
8. Read all of the Kitchen threads
9. Cook your own ROM
10. Share it with us
11. Be eternally happy
Click to expand...
Click to collapse
Thank you, and all others who have responded, for your greatly appreciated advice! I've been trying to get my head around the process. Have backed up using PIM backup and settings saviour... and with your hand holding, am about to dive into the world of modding!
It's a little daunting for a newbie (and I really do mean a newbie!), but with everyones help, and this fantastic community as a resource, bah, watch me fly! (I'll probably be back tomorrow asking how I can de-brick the phone ;O) )
Thanks again all.
Cool. Upgraded to WM6.1 - Akeos latest black one.
Have to say the functionallity is 10 times better already. Upgraded to the latest radio too.
HOWEVER... and this is where the newbie kicks in, I can't seem to start any data sessions. IN COmm manager I don't have the option to turn the data connection on (this was also the same prior to the radio upgrade)
Don't suppose anyone knows how to resolve this do they?
As I say, taking my first steps on the modding ladder, and it appears I may have slipped...
mkOnKeY bOy said:
Cool. Upgraded to WM6.1 - Akeos latest black one.
Have to say the functionallity is 10 times better already. Upgraded to the latest radio too.
HOWEVER... and this is where the newbie kicks in, I can't seem to start any data sessions. IN COmm manager I don't have the option to turn the data connection on (this was also the same prior to the radio upgrade)
Don't suppose anyone knows how to resolve this do they?
As I say, taking my first steps on the modding ladder, and it appears I may have slipped...
Click to expand...
Click to collapse
You have to define your data connection from "Start, Settings, Connections, Connections, My ISP, Add new" according to your carrier (ie GPRS, 3G). Same goes to configuring MMS, just that you do it at "Start, Settings, Connections, Connections, My Work Connection" and you also have to define it in Arcsoft MMS.
You will not be able to start them from the CommManager as they connect on demand as needed, but you can STOP the in the CommManager when they are connected since they don't disconnect automatically.
tnyynt said:
You have to define your data connection from "Start, Settings, Connections, Connections, My ISP, Add new" according to your carrier (ie GPRS, 3G). Same goes to configuring MMS, just that you do it at "Start, Settings, Connections, Connections, My Work Connection" and you also have to define it in Arcsoft MMS.
You will not be able to start them from the CommManager as they connect on demand as needed, but you can STOP the in the CommManager when they are connected since they don't disconnect automatically.
Click to expand...
Click to collapse
Once more, thanks to all who've helped me over the threshold - the data connection must have been an issue with the signal, as this morning it was happy to connect to mms/internet via 3G/GPRS and HSDPA (which I didn't even know Orange supported).
Cheers all. Your help has been absolutely spot-on. It's refreshing to come to a community where you not only happy to help newbies, without the usual sarcasm or pomposity you find elsewhere, but you do so in a clear and concise way that really does help.
Thanks all. Look what you've gone and started now... !!!
One happy newbie stepping out into a brave new world...
---edit---
please delete this post
have fun with your spv
I have a problem, and the more I search the forums, the more I worry it may be due to an upgraded Rom.
The original owner of the spv m700 I just bought has by the looks of it debranded it and installed WM 6.1:
Device name: HTC_P3600i
Model NO: TRIN100
Windows Mobile 6.1 Professional
ROM version 3.03.751.5
ROM Date: 04/01/08
Radio Version: 1.16.00.00
Protocol Version: 32.53.7018.01H
With Tomtom 6 installed and seemingly working, the GPS receiver is not being detected. I have done what the forums say, i.e. selected "NMEA GPC receiver", get a screen with:
COM3: GPS in COM9
COM7: RIL on COM6:
S2410 IRDA
I have clicked on the first option (COM 9 is recommended), but still no GPS device found, indoors or out, after 10 minutes of trying
Like I say, much info says the above should solve it, but others say an upgrade can knock out the GPS and it needs to have a different ROM reinstalled. Never done this before, and there may be an easier solution?
Help anyone.... please.......?!
I'm not 100% sure but I think your radio rom needs upgrading to support GPS - I'm sure the one's that do have 11 at the end of them..
Really?? It would be great to finally reach a soultion!
Can someone verify if this is true and if so, what do I have to do??
Thanks.
Hi Monkey Boy and all.
I think I'm in a similar situation that you were...
The original owner of my new spv m700 debranded it, unlocked it (by flashing an old radio ROM) installed WM 6.1. I now fear that the reason tomtom detests no GPS device is because the radio may need updating too... (see below for the spec on my phone at the moment).
Have you discovered which is the best radio to update to?
Device name: HTC_P3600i
Model NO: TRIN100
Windows Mobile 6.1 Professional
ROM version 3.03.751.5
ROM Date: 04/01/08
Radio Version: 1.16.00.00
Protocol Version: 32.53.7018.01H
All advice and recommendations welcomed. I have never flashed anthing before so this is all new to me, but I like to think I learn fast...
Thanks,
Matt
http://forum.xda-developers.com/showthread.php?t=293957
Original owner would have done this to unlock it, so all you have to do is search for the latest radio rom and flash that to your phone - there are guides how to do this in here..
Radio ROM
http://forum.xda-developers.com/showthread.php?t=325197&highlight=radio+flashing
Guides
http://trinityguides.info/index.php?option=com_content&task=category§ionid=4&id=31&Itemid=66
Hey Trixter.
Thanks for the reply.
I managed to get in touch with the original owner and he sent me a link to an an .exe file which I downloaded, ran whilst activesynced to my phone, and voila! I now have radio ROM 1.50.08.11. Tomtom 6.03 now successfully works using settings "other NMEA GPS receiver" with "GPS baud rate 115200" and "GPS in Com9"!
I'm a novice and bought the phone as a "pimped up" spv m700. But I'm learning loads since joining thanks to people like your good self answering posts, so thanks.
Matt
Thanks to seeing your signature I'm sorted! If you read anyone else with the same problem, I hope my experience helps them.
Thanks again for your time,
Matt.