Artemis switches off after WM6 upgrade - P3300, MDA Compact III ROM Development

Hi all
I upgraded mu phone with the official ROM image from HTC.
It happens that my phones switches off unexpectedly. It happened 5/6 times in the last week.
I have not installed any additional software.
Is anyone experiencing this same behaviour ?
Regards
hawk

hawk,
yes, it was the same problem after B&B, Vanilla and many other binaries from the forum. May be 1-2 times per day. At the moment I have original WM6 from one of the post. It likes me, stable and fast, without any additional useless soft like CUBE and other ****
But it opposite to your situation, you have a problem with original as well

i had the same problem i flashed my rom twice and its working like charm now just try to reflash it again!!! i used an official rom wm6 downloaded from wiki xda developers

Related

Stable WM6 with Japanese Support

Ok so off recent reading it seems that many people that have followed the steps in "Make your X01HT a WM6 Device (for Gaijins)" have unstable devices. Please complete this poll, and if you have a stable (one or less crash a week) please tell us how. It seem that many people here are Stuggling to get a stable WM6 that supports Japanese.
My Black Majik ROM and every other ROM before it crashes 4 or more times a day!
to stop crashing cook in Japanese support??
look at this (from Make youe x01ht a wm6 device) from my last post there.
I wish somebody could figure this out. Anyway, at the moment, the cooked lvsw with built in Japanese support works best. Although it is a little slow. It has not crashed for 2 days solid -- no matter how much I have thrashed it. Every single other English rom crashes.
Therefore, it is possible to make a stable wm6 with Japanese support -- just how!
-----------------
Yep I installed the Japanese input enabled version of LVSW. Some things I noticed were that it was modified to install the Japanese stuff (including character input, mslite, fonts, x02ht setting for softbank Japan, etc) following flashing, i.e installed these setting automactially from the extended rom. Now, I am wondering why the thing is so stable. It has not crashed ONCE in the 24 hours I have been trying to crash it.
Funny because every single other English WM6 rom, including the same version of the LVSW rom I have installed have all had terrible problems with random crashing etc; the only difference being that I followed instructions from the beginning of this thread to install the Japanese.
My question: how do we set up English roms so that they automatically install Japanese stuff (including x01ht settings for Japan) from extended rom following flashing?
Very strange that doing it this was could make it so stable. Unless of course, there are newer/more stable versions of a lot of the software links that appear in the original thread?
Ideas please! Would like to solve this enigma.
tora201, where do you download the Japanese input enabled version of LVSW ? I'm really tired of frequent crash and would like to have a really stable ROM.
rickywck said:
tora201, where do you download the Japanese input enabled version of LVSW ? I'm really tired of frequent crash and would like to have a really stable ROM.
Click to expand...
Click to collapse
http://rapidshare.com/files/39953635...WWE_3.30.3.zip
See #89 onwards of "make your x01ht a wm6 a wm6 device"
And, yeah, it is extremely stable. I have installed the HTC home plugin thing as well as the new touch dialer, etc. No problems at all! Cheers mate.
I use LVSW 3.30.3 English ROM with LetsJapan and JapaneseIME (both by Asukal) installed...
Generally, phone seems stable, but then after switching to any of Japanese IMEs (Tegaki, Romaji...) trouble starts... Worst problem is that sometimes SMS and MMS freezes the phone, for example, on message reception. It is even worse by the fact the incoming message is then lost forever!
For some people, switching to Japanese input everyday is essential, and of course, messaging too... these two things seems to clash on all ROMs (some seems to be much more stable than the others).
What we need here is more stable Japanese font & input method package to do things properly... We need Asukal
tora201 said:
http://rapidshare.com/files/39953635...WWE_3.30.3.zip
See #89 onwards of "make your x01ht a wm6 a wm6 device"
And, yeah, it is extremely stable. I have installed the HTC home plugin thing as well as the new touch dialer, etc. No problems at all! Cheers mate.
Click to expand...
Click to collapse
Thanks, but the link seems not working, could you post again ?
Stable CJK system
My experience :
1. Install Asukal's echinaNo5a to support Chinese, Japanese and Korean.
CJ fonts are included.
1.1 move&over write /Temp/wince.nls to /Windows
1.2 delete the startup menu's "usemynls?".
2. Install A4&Hanwan to input Chinese input and Atok to input Japanese.
3. Install other stuffs: Genocide Today, KPCapt, MMSLite265, JJ Pimp My Black 0.2,SQLCE 2.0, AozoraKoneko
I am using Elf_Edition_v2.1 based on LSVW 0519 ROM switching from Black 3.0.1.
It usually works several days for me and surely randomly locks too, but is mostly stable one ever
If anyone teaches me how to cook a ROM, I can make it.
I've tried it and it seems that it is quite stable, but I can't connect to the Internet via GRPS/3G. I've tried to delete the Softbank setting but it didn't seem to work.
http://rapidshare.com/files/40804243/RUU_signed.nbh.html
here you go! Just the nbh file.
Thanks for your replies and votes. Many others here seem to have crashing/freezing problems, just wondering why you all (except me and one other) said that your PDA is stable?
My Black Majik ROM has been better recently, but not what I call stable, recent crashes:
Thurs-0
Fri-4
Sat-0
Sun-0
but I don't know why.
I expect a phone to be completely stable, not mostly stable, not like old versions of Windows, like XP very rarely crashes, sure programs crash but I think it is a major programing/design error when the OS fails and the only way out is a reset.
People have all sorts of problems, quite often linked to the software they install(in this case Japanese support software), but I don't see how this software stops the OS from working, if there is a problem with SPB mobile or any other sotware then that software only should crash within the OS and leave everthing else alone, not take down the whole system, unbelievable!
pre-cook Japanese into the external rom in wm6 english??
rockyV said:
Thanks for your replies and votes. Many others here seem to have crashing/freezing problems, just wondering why you all (except me and one other) said that your PDA is stable?
My Black Majik ROM has been better recently, but not what I call stable, recent crashes:
Thurs-0
Fri-4
Sat-0
Sun-0
but I don't know why.
I expect a phone to be completely stable, not mostly stable, not like old versions of Windows, like XP very rarely crashes, sure programs crash but I think it is a major programing/design error when the OS fails and the only way out is a reset.
People have all sorts of problems, quite often linked to the software they install(in this case Japanese support software), but I don't see how this software stops the OS from working, if there is a problem with SPB mobile or any other sotware then that software only should crash within the OS and leave everthing else alone, not take down the whole system, unbelievable!
Click to expand...
Click to collapse
Mate, here is a sort of copy of my post in the "Make your X01HT a WM6 Device (for Gaijins)" (in wm6 hermes forum).
I have not heard anything back about my inquires, so I am posting it here with a few changes/comments. Note, I am using a x01ht and live in Japan, so I am using the softbank network.
I had the same problem as many others: when using WM6 (An English version) with Japanese language cabs/MMSlite etc installed AFTERWARDS using the guides on this board, they ALL crash, in one way or other.
This is strange because The Samurai build (beta 1/2) (Japanese cooked rom) worked perfectly! What is going on here? I wish there was away to convert it to English (I mean the GUI only). Then I would be in PDA heaven.
Overall, I have found that all Japanese language wm6 roms have worked better than with English ones installed with Japanese input/language support. Anway reasons/ideas why this would be would be most welcome......
Some typical crashes with English WM6 builds with Japanese language/fonts/mmslite 2.65 or 2.75 installed aftterward:
- MSSlite crashes A LOT (the whole thing freezes, then upon re-set, half the mail in the inbox is gone -- or the MSSlite programme itself is gone and needs a reinstall).
-crashes A LOT using explorer. No reason at all. Again, it just freezes. Freezes more with wifi.
-sometimes crashed on the comm manager screens, or in settings.
The point is, the thing crashes A LOT under WM6 with Japanese support installed later, following any of the guides here.
Anyway, in the end I went with Hermes_WWE_3.30.3.3_4_X01XT (Latest LVSW wm6 in English with Japanese support cooked in to install settings upon first boot via the external rom)
http://rapidshare.com/files/39953635/Hermes_WWE_3.30.3.zip
It works fine. Not one crash over a week! And believe me, I have tried to crash the thing. I even installed the touch HTC plugins.
Basically, the difference between this and other wm6 roms is that all the Japanese support was cooked in to install via the external rom upon the first boot. So, my question is:
Since somebody (A Japanese guy) made this, it should be possible to make a similar Black version (for example) with built in Japanese language/mms/softbank settings set up to install automatically via the external rom upon first boot. Anybody know how to do this?
If we can do this, or somebody post a guide, it would seem to solve all our problems.
I'm guessing that maybe we take a copy of the Ext_ROM from the one you're using, install another English ROM, and then copy the EXT_ROM over, and hard reset it to kickstart the auto setup process. What do you think?
I tried it in Black Majik, and had to run the Ext_ROM manually, but nothing changed, even after a reset! No connection, fonts, nothing!
You've got to edit a file in the Windows directory to enable it, I see. When I get time I'll have a go...
hamster0914 said:
I'm guessing that maybe we take a copy of the Ext_ROM from the one you're using, install another English ROM, and then copy the EXT_ROM over, and hard reset it to kickstart the auto setup process. What do you think?
Click to expand...
Click to collapse
Would that work?? Oh, my phone is locked so I can't do that! :-( its the post April softbank one. Damn you softbank! Can somebody else try that??
****! This ROM is Magic!! How made it?
Only problem is that it's slow, if compared with Black. Can anybody cook a black ROM with this incredible Softbank support?
Please!!!!!
hamster0914 said:
I tried it in Black Majik, and had to run the Ext_ROM manually, but nothing changed, even after a reset! No connection, fonts, nothing!
You've got to edit a file in the Windows directory to enable it, I see. When I get time I'll have a go...
Click to expand...
Click to collapse
You mena that if if you run all the .CAB of the extended ROM, 1 by 1, in the proper order; nothing changes?
Yes, that's right.
hamster0914 said:
Yes, that's right.
Click to expand...
Click to collapse
I checked the ROM carefully ... All the Japanese support is cooked into the ROM, not via Extended ROM.
Or that boy cook new ROM, or we can't do anything. Anyway ... I think that it's extremely slow for be WM6.
Saludos
Great! Kind of.
It is good to know that I am not the only person who has had chronic trouble with installing Japanese support in WM6. I have tried quite a few ROMs, Black 2.5 through Dymond, as well as a few LVSW, and have had random lock-ups and the SOD on all of them. I keep going back to my Japanese WM5 ROM for the stability. I've got a three-day weekend coming and will report back after flashing Hermes_WWE_3.30.3.3_4_X01XT with anything I find out about this baked-in Japanese support ROM.
To sesaru, I have noticed that LVSW is routinely slower than Black - even without any Japanese support issues.
the rom is slow, but it is completely stable. I wonder how it was made? It certainly shows it CAN BE DONE. I have not had a single lock-up since I installed it. So.... something going on here. Nobody can figure it out? Oh, and for the record, it installed all of the Japanese stuff from the external rom upon first boot (the 3 second thing). So, I wonder why does Japanese work without crashes if installed automactially upon first boot via external rom??

Artemis Touch 4.01 Vanilla call problem

Hi Everybody!I have SPV M650 Orange(Artemis).I update my ROM to Artemis Touch 4.01 Vanilla and now i have problem with calling.After night i try to call but... my phone not respond,others programs and function working normally.Restart(big battery drain 10% down after soft reset !!) and my Artemis working fine.Before im using Artemis 4.01 Vanilla ROM and problem will be the same!I update my radio to 03.08.90 but problem stay.Please help lads!
Sorry,bad english.
Regards.
the same
I have the same problem, but I have a FULL version of 4.02 ROM (ENG). The problem is exactly the same - after some time (one night for example) the "phone application" stops responding when I want to make a call. I think it's the ROMs fault. I thinking of going back to the original WM5 or original WM6 from HTC.
kosiara said:
I have the same problem, but I have a FULL version of 4.02 ROM (ENG). The problem is exactly the same - after some time (one night for example) the "phone application" stops responding when I want to make a call. I think it's the ROMs fault. I thinking of going back to the original WM5 or original WM6 from HTC.
Click to expand...
Click to collapse
I think the problem is from the OS ROM. I had same problem with vanilla 4.02.
Just try it another new build ROM.
Cheers
Same problem here
Zecanilis said:
I think the problem is from the OS ROM. I had same problem with vanilla 4.02.
Just try it another new build ROM.
Cheers
Click to expand...
Click to collapse
Hi Zecanilis,
I encounter the same problem that is described here by user kosiara an Novy
The GSM signal is excellent, but the phone does not work from time to time and when I try to make a call, I get the message "the operation failed". of course nobody can reach me neither... When I do a soft reset everything is back to normal...
This is very anoying and I do not know what to do.
I bought this PDA second hand, with the upgrades already done for me. Since I do not have any personal data or programs on it yet, I wouldn't mind doing a hard reset and installing everything from scratch.
What would you suggest as a stable system OS and ROM versions?
Any help would be much appreciated.
Here are my actual data:
XDA Orbit
IPL 1.25.0001
SPL 1.11.0000
GSM 03.08.90
OS 3.13.0.0
ROM version : Artemis Touch 4.02 WWE
ROM date 4/08/08
Protocol version 4.1.13.52
Model Nr : ARTE 200
WM 6.1 Professional
CE OS 5.2.19199 (Build 19199.1.0.0)
Regards
But, yet again, I don't understand...
Vanilla 4.01 and 4.02 seem to be very popular and appreciated roms.
How come we are the only ones to complain about phone not working properly?
Is it really the OS build? CE OS 5.2.19199 (Build 19199.1.0.0) I don't think so. I have seen it also a lot in Devices.
What could it be then?
I hope it is not a Gsm radio hardware pb......
Any suggestions?
Thanks
Zbootsom said:
But, yet again, I don't understand...
Vanilla 4.01 and 4.02 seem to be very popular and appreciated roms.
How come we are the only ones to complain about phone not working properly?
Is it really the OS build? CE OS 5.2.19199 (Build 19199.1.0.0) I don't think so. I have seen it also a lot in Devices.
What could it be then?
I hope it is not a Gsm radio hardware pb......
Any suggestions?
Thanks
Click to expand...
Click to collapse
I'm not "guessing". I had the same problem and i think my problem is solved after this new rom i have.
Just try one recent build of OS. My build is 19591.
Before upgrading, just turning off and on the phone in the "comm manager" whould give me that problem sometimes. Now i've allready tested it and all is ok.
Cheers
Zecanilis said:
I'm not "guessing". I had the same problem and i think my problem is solved after this new rom i have.
Just try one recent build of OS. My build is 19591.
Before upgrading, just turning off and on the phone in the "comm manager" whould give me that problem sometimes. Now i've allready tested it and all is ok.
Cheers
Click to expand...
Click to collapse
Hi, and thanks for your reply.
I am new to this and althought I read many post, I am not sure.
Can I just upgrade the OS Build without flashing a new ROM.?
If Yes, How do I do it...any tutorial?
Thanks
No.
You have to flash a complete new ROM.
Cheers
OK Thanks
Whish me good luck,,,
Good luck and good choose...
!Novy said:
Hi Everybody!I have SPV M650 Orange(Artemis).I update my ROM to Artemis Touch 4.01 Vanilla and now i have problem with calling.After night i try to call but... my phone not respond,others programs and function working normally.Restart(big battery drain 10% down after soft reset !!) and my Artemis working fine.Before im using Artemis 4.01 Vanilla ROM and problem will be the same!I update my radio to 03.08.90 but problem stay.Please help lads!
Sorry,bad english.
Regards.
Click to expand...
Click to collapse
I experienced that problem a few weeks ago and it's happening more often in the last days. My ROM is Artemis Touch 4.02 full.
Some people started complaining that they couldn't phone me while I didn't see any problem with my phone (as long as I didn't try to make a call myself).
Funny addition to that problem: Sometimes I find my phone (usually in the morning) with a blank white screen. I don't know why that keeps happening but I sure would appreciate any hints what's the root of all that evil.
I'm happy with the 4.02 ROM so I'd rather avoid some things if it keeps the ROM stable.
novy said:
I experienced that problem a few weeks ago and it's happening more often in the last days. My ROM is Artemis Touch 4.02 full.
Some people started complaining that they couldn't phone me while I didn't see any problem with my phone (as long as I didn't try to make a call myself).
Funny addition to that problem: Sometimes I find my phone (usually in the morning) with a blank white screen. I don't know why that keeps happening but I sure would appreciate any hints what's the root of all that evil.
I'm happy with the 4.02 ROM so I'd rather avoid some things if it keeps the ROM stable.
Click to expand...
Click to collapse
when you installed your new rom did you flash it twice ?
this will make sure that all system files are copied 100%.
its really important to do this on all new roms that you install.
neilhhardy said:
when you installed your new rom did you flash it twice ?
this will make sure that all system files are copied 100%.
its really important to do this on all new roms that you install.
Click to expand...
Click to collapse
Thanks for your answer. Yes, I flashed it twice and I even flashed a factory rom before that. All Artemis Touch roms were fine until 4.01 and 4.02.
So Zecanilis is probably right blaming the OS version for that malfunctions.
New Rom
I have flashed my device using USPL (took me 2 days to setup the program to work with vista drivers). Then I flashed the same ROM I had before (Artemis Touch 4.02 full Red and Black) but with a different OS build. (as Zicanillis advised)
I will use it for a while and let you know if the freezing phone problem has been corrected.
Cheers
One other change that is on my build is page pool.
My page pool is 6 MB, and some Touch and vanilla (included the 4.02 i had) is only 4MB.
In my opinion that could be another issue to test.
My PDA is working just fine now.
Cheers
For me the problem was the OS Build.
I flashed my device with the same 4.02 vanilla but with a different OS buid and the Phoneworks great. Been using for 2 weeks now, never freezes or looses signal.
Cool
Thanks to Zecanillis advice! obrigado !

Anyone else having serious crash problems with WM6.1 ROMs?

After trying six or seven WM6.1-based ROMS from three different cookers (19199 and 19209), I'm starting to wonder if there's not something 'seriously' wrong with the WM6.1 base image.
I begins to strike me as some sort of duration-based memory degradation. My experience has been that runtime lasts between 2 and 48 hours before a hard reset is necessary. In my case, I pared my installs down to adding merely my password safe as the only add-on, and still it crashed.
The most interesting pre-crash was going to "Programs" and noticing the number of icon substantially reduced (...and reducing...), and the remaining icons as default program icons.
After about five days of fighting with these and trying different methods of extending runtime, I reloaded an older copy vp3G's 3.0.0 from last summer and haven't had a problem for the past 72 hours. In fact, I had no lock-ups with WM6-based, previously.
I'd be interested in other people's experiences with WM6.1-based ROMs on the Hermes...
- Marc
i may be wrong, but i think recall reading that flashing back to your stock rom, then flashin to 6.1 may fix some hard reset problems....
as for me, ive used 4 or 5 6.1 roms and havent experienced a hard reset.....my latest and favorite so far is faria's and dr.p's 6.1 rom, been running a week no hard reset...
im usin an at&t branded 8525
i was having a few issues with this but ended up changing radio versions from my standard 1.16 to 1.48.
havent had an issue since doing that.
i had the crash problem also, but after I not install htc cube in any of the wm6.1, everything ok and stable.
problem is with cube in wm6.1 i think.
Faria's is the best so far, but they all have problems to varying extents. Have you tried running Oxios Close apps? That will help you claim back memory and maybe help prevent the need for a hard reset. you can get it here: http://www.oxios.com/memory/
lupes5 said:
i may be wrong, but i think recall reading that flashing back to your stock rom, then flashin to 6.1 may fix some hard reset problems....
as for me, ive used 4 or 5 6.1 roms and havent experienced a hard reset.....my latest and favorite so far is faria's and dr.p's 6.1 rom, been running a week no hard reset...
im usin an at&t branded 8525
Click to expand...
Click to collapse
Interesting. I did notice that on some ROM flashes that boot screen retained a previous ROM's splash. That might mean that some ROMs are not including all facets (OS, Radio...Bootloader?) of the complete image. Will give that a shot now that I'm back to a stable WM6.
st3v3 said:
i was having a few issues with this but ended up changing radio versions from my standard 1.16 to 1.48.
havent had an issue since doing that.
Click to expand...
Click to collapse
Radio is 1.45 with vp3G 3.0.0. Will check again after a Faria re-flash and upgrade to 1.48 if it isn't included.
fizzy15 said:
i had the crash problem also, but after I not install htc cube in any of the wm6.1, everything ok and stable.
problem is with cube in wm6.1 i think.
Click to expand...
Click to collapse
I had that thought too, but my last ROM didn't include any of the HTC apps, at all, so I think it's some conflict or something lower level. The cube 'is' a resource hog, however...
hamster0914 said:
Faria's is the best so far, but they all have problems to varying extents. Have you tried running Oxios Close apps? That will help you claim back memory and maybe help prevent the need for a hard reset. you can get it here: http://www.oxios.com/memory/
Click to expand...
Click to collapse
The resets are always due to hard lockups, and they can be with only Activesync running as an application. I try to keep the number of running apps at a minimum for reasons that are probably fairly obvious to all here...
you are not alone...
http://forum.xda-developers.com/showthread.php?t=376211
Im also having the same problem .. all sorts of experiments has been done to test on why WM6.1 crash when I install them .. but 1 thing i noticed that it always hang before softreset that eventually lead to hardreset .. i thought hardware accelerations problem ... so what i do is .. every WM6.1 i changed to 8mbpp .. until now my machine ok.
My2Cents.
-/Abid.
Flash to stock rom then to wm 6.1... Apparently there is a problem if you flash from big storage rom to wm 6.1(not sure why this is so) but there have been a huge number of people who say this works for them, myself included.... I tried every wm6.1 rom that came out then doing something stupid eflashe stock os. No problems with wm 6.1 since. Also I believe that 19209 is somewhat more stable than versions 19199 or 19202... I'm using PDAViets 19209 rom,just changed to black edition, and have had NO trouble EVER since installing it when it first came out, no soft resets and more importantly, no hard resets... Cheers
milleniumbug89 said:
you are not alone...
http://forum.xda-developers.com/showthread.php?t=376211
Click to expand...
Click to collapse
Yep, sounds like the same behavior I'm seeing. Soft lock, reset, soft lock, reset, hard reset...lose data... (rinse and repeat)
fix
http://forum.xda-developers.com/showthread.php?t=381959
follow those instructions and your problems will be solved.
I have the same problem! Tell schaps so in his next rom he may fix this serious problem
Shadow CE 6.1
chronosxx said:
After trying six or seven WM6.1-based ROMS from three different cookers (19199 and 19209), I'm starting to wonder if there's not something 'seriously' wrong with the WM6.1 base image.
I begins to strike me as some sort of duration-based memory degradation. My experience has been that runtime lasts between 2 and 48 hours before a hard reset is necessary. In my case, I pared my installs down to adding merely my password safe as the only add-on, and still it crashed.
The most interesting pre-crash was going to "Programs" and noticing the number of icon substantially reduced (...and reducing...), and the remaining icons as default program icons.
After about five days of fighting with these and trying different methods of extending runtime, I reloaded an older copy vp3G's 3.0.0 from last summer and haven't had a problem for the past 72 hours. In fact, I had no lock-ups with WM6-based, previously.
I'd be interested in other people's experiences with WM6.1-based ROMs on the Hermes...
- Marc
Click to expand...
Click to collapse
Use Shadow CE 6.1's rom .. I have been using it for months, and it is near flawless. Do it, you won't regret it . I've tried everything else .
Fix works...
raidzx said:
http://forum.xda-developers.com/showthread.php?t=381959
follow those instructions and your problems will be solved.
Click to expand...
Click to collapse
After trying almost everything to get more than a few hours of runtime out of WM6.1, I followed the above instructions to the letter and WM6.1 has worked for 24 hours now (yes...a new record). I will update in a few days if the Hermes/Faria 6.1 combo continues to function.
One note: I was not able to use Vista to update to Hard-SPL after the Stock AT&T 6.0 ROM re-flash. Each attempt resulted in an updater error on the PC after the handheld entered bootloader mode. Did the same procedure on XP and it worked flawlessly.
Hey. Had the same problems but i solved it with flashing a AT&T Stock Rom first.
Now my Hermes with PDAVIET B&C WM6.1 Rom running like a flash
Without any freezes.
here is the link to my problem thread:
cu
poPY
raidzx said:
http://forum.xda-developers.com/showthread.php?t=381959
follow those instructions and your problems will be solved.
Click to expand...
Click to collapse
Sorry, but following those instructions does NOT solve my problem. It does for some, but not all.
What works for ME, is to turn off the Storage Card power saving.
gregma said:
Sorry, but following those instructions does NOT solve my problem. It does for some, but not all.
What works for ME, is to turn off the Storage Card power saving.
Click to expand...
Click to collapse
I will update the thread with your information, thanks!

Strage Uni?

Hello. I have a G3 (Bootloader version: 1.01) Universal (Vodafone VPA IV). Until last week I was using the Tomal 8.5 standart edition ROM, and then I decided that I need something different - faster and new I upgraded to Vanilla's VNInt latest ROM and it was good until I installed some apps and then the uni started to freeze and needed a soft reset. The situation was awful and I decided to return the 8.5 Tomal ROM and everything was fine for a couple of days - no need to soft reset. Last night Win_XP advised me to flash with Mo3ulla's latest ROM and so I did. Very fast but the Uni again started to freeze and needs soft reset. Not so often as with the VNInt ROM but still it's annoying
So if anyone has an idea how to fix this problem - please share, I would be very thankful!
P.S. My english is not very good, so if you do not understand something - ask me and I will try to explain it in better way .
I had the same freezing problem with VNint's ROM as well. What I saw was it freezed for about 10-15 seconds, then it came back to life again (so without a reset). I switched to Tomal's 8.5 ROM which has this problem too, but less than VNint's ROM. I think it's a kernel problem, both ROMs use the same kernel version.

Sick of Asus p320

I got an Asus P320 a couple of months ago but having been having too many problems with the piece - the HW seems to be grossly underpowered for WM6. apps open slowly, the phone crashes at least once a day, it suddenly loses the GSM service connection and i have to keep restarting the radio from the comm manager, picking up a call results in several apps opening on thier own (like the clock, calendar...)
I've tried upgrading to the latest WWE ROM (4.15) but the problems still persist. I'd now like to try WM5 on the device to see if it works. Would anyone know how I can port Wm5 to this device? or maybe even Andriod or Linux?
Or would anyone know how to make the damn thing more stable? I tried Pocket Hack master to overclock the CPU and it does seem to work most of the time, but the device still crashes once in a while, and it hasn't stopped multiple apps from opening when I pick up a call.
I hope Asus is reading this coz they've done a pretty bad job on the model by overloading it with wm6 and thier crazy custom apps.
try using hdubli's WM 6.5 ROM. I personaly am feeling a bit diffrence in the performance, the phone just started responding and working faster
P.S. I recomend using the bild from 21.04.2009, because the M2D Rom has many bugs
Helz said:
try using hdubli's WM 6.5 ROM. I personaly am feeling a bit diffrence in the performance, the phone just started responding and working faster
P.S. I recomend using the bild from 21.04.2009, because the M2D Rom has many bugs
Click to expand...
Click to collapse
Hi Helz. Yes, I am doing that, but thanks for the tip on the builds . I've got the M2D build on, and yes - the phone is definitely more stable than before, but it does have bugs. I will try the full build this weekend
Thanks
gsm
hi guys,
due to gsm problem on p320 , let me say, some people has similar problems, and also I .
my observations shows:
fieldtest157 shows only 2 values RSSI and RX Quality.
my experience is that most stable original versions are 415wwe and 416tha.
but still is present problem of temporary "unreachability in gsm network" for cca up to half an hour , if there is some switching between BTS stations.
Solution
Hi DO the following
I was also facing same problem.
SO i install the Latest ROM (problem persist)
I again formated the Phone Reinstall the Latest ROM.
Now it was very Fast. I install Applications of choice (one by one -- then restart Device after every installation)
Now my p320 is as fast as other wm device. applications open very fast.
Dont install Kaspersky or pirated software (most of them will slow the device)
will try to install windows mobile 6.5 (from XDA)
hoping to get official WM6.5 for p320 (when released)
Check out my WM6.5 installation guide (with pix) at http://mrinaltech.wordpress.com/2009/08/11/windows-mobile-6-5-on-your-asus-p320/
Android
Hey can anyone please give me Android for porting on my P320.......because Windows Mobile is the worst os i hv ever seen.......... An unstable version is also ok till it runs.............i hv tried many like the Android Files for Diamond and Android Eclair........both boot to a certain level in Windows and then the phone switches off..............Please I like Android and I am ready at any cost to put Android on my Phone..................

Categories

Resources