ERROR GetConnectionType - Upgrading, Modifying and Unlocking

I downloaded SE rom 1.2 and when i run exe in dos window i have a message - ERROR GetConnectionType.
How tu upgrade or downgrade to any other rom ??? Please Help !
i have T-Mobile with wm2003
ROM version 4.01.00 ENG
ROM Date 10/27/03
RadioVersion 6.18.00
Protocol version 324e4
I have an SD card (256mb)
I want to downgrade to SE ROM 1.2 to unlock it, but i cant
Please HELP me !

Have you ever tried the search?
Try "downgrading" via your SD-Card.
T-Mobile WM2003 ROMS have the problem that downgrading via exe files ends with your error message....
HTH
Stefan

LumpiStefan said:
Have you ever tried the search?
Try "downgrading" via your SD-Card.
T-Mobile WM2003 ROMS have the problem that downgrading via exe files ends with your error message....
HTH
Stefan
Click to expand...
Click to collapse
same problem trying to upgrade to 4.01.16 from 4.00.21 actually...

help needed too
ah..
i also have the same problem trying to go from 4.01.16 to A.30.09 ROM. after cooking the ROM, i copied the NK.nbf file to XDAtools directory and tried to copy the image to the XDA. also get the same error messages and cannot proceed.
is there some kind of lock in the device with 4.01.16 ROM to prevent changes?
my bootloader is V6.22 and the bootloader fix from XDAtools can't fix it.
help appreciated.

Related

Unlocking SX56

Hello,
I need to unlock my Seimens Sx56 I downloaded version 1.2exe
but I get an error message "can not find ROM image to upgrade your Pocket PC"
Current
ROM A30.09
ROM 01/01/04
Radio Version A.33.02
Protocol version 1.3.3
Any suggestions, please help :
looking for the same.
it might require special editio rom.
What have you downloaded, and what is required by you? Maybe i can help....
Stefan
as per following thread link
http://forum.xda-developers.com/viewtopic.php?t=1611
http://forum.xda-developers.com/viewtopic.php?p=4203
I came to know from following
"Update: Do not download or install The Manipulator unless you have a serial cable already, and need to reset the call counters or change the IMEI on phones with Radio software prior to 4.20. To remove the SIMlock, simply install the XDA-developers Special Edition ROM, which, apart from unlocking the device, adds lots of other extras. Look at the forum for details on where to get it"
I think I must have "Special Edition ROM" which is not available right now. "I am downloading XDA-developers-SER-v12.exe" but Its for new xdaII I think, it might not work for xdaI.
some other I have downloaded are,
*Unlock XDA manipulator program.zip (contains XDAmSetup.exe)
*XDAunlock.exe (of 19k, which is not working I have tried it. )
*XDAunlock-src.zip (I have download this 2 months back but dont know what is it for).
my phone details
==================
make : ATT
ROM : A.30.09 eng
rom date : 01/01/04
radio ver: A.33.02
protocol v.: 1.3.3
MODEL : PW10B1
==================
Please tell me what should I do.
xdaI99 said:
I am downloading XDA-developers-SER-v12.exe" but Its for new xdaII I think, it might not work for xdaI.
Click to expand...
Click to collapse
That is the right file. It's designed for the xda I devices and is able to unlock your device.
There are several places to download it. You can get it via edonkey, should be announced somewhere here on this site, or you can get it from me.... http://lumpistefan.dyndns.org/tools/special_rom_1.2.exe.zip
xdaI99 said:
*Unlock XDA manipulator program.zip (contains XDAmSetup.exe)
Click to expand...
Click to collapse
This tool requires a serial cable and i think a Radio version before yours
xdaI99 said:
*XDAunlock.exe (of 19k, which is not working I have tried it. )
Click to expand...
Click to collapse
This tool requires the wmodem application installed in the ROM A.30.09 do not have this.
xdaI99 said:
*XDAunlock-src.zip (I have download this 2 months back but dont know what is it for).
Click to expand...
Click to collapse
Same as above, but this is the sourcecode, for modyfing, or self compiling....
HTH
Stefan
thanks for the gr8 help man.
what you suggest me to do for unlocking now.
can you tell me small stepwise procedure because I have many following files and dont know which one should I use first. I am very new and I dont want to take risk, I came to know that procedure can permanent damage my pdaphone, I dont have serial cable yet I am going to buy it rightnow.
Thanks
Just download the XDA-developers Special-Edition ROM 1.2 and install it on your device. (just run the exe)
This should install a new rom on your device (based on 3.17.03) and this ROM includes the xdaunlockk tool. This will automaticly started at the first boot, so that your device will be unlocked.
Test it if it's really unlocked, afterwards you can upgrade your ROM to any version you want. If you don't have an image of your rom you cann cook your own rom at http://lumpistefan.dyndns.org or you can save your old rom before flashing the xda-developers rom to an SD-Card and use that for flashing back....
Check also:
http://lumpistefan.dyndns.org/tools/manual_unlock.htm
http://lumpistefan.dyndns.org/tools/manual2_unlock.htm
HTH
Stefan
as per your instruction in given link.
http://lumpistefan.dyndns.org/tools/manual_unlock.htm
there is no need of manipulator I think because I can unlock by othere way as you given.
what I will do is.
1. will backup my original rom.
2. install new SE 1.2 rom which can be install without serial cable I think as per you.
3. this rom included unlock tool inbuilt and can unlock my phone.
is this work.
and please tell me what is "XDArit (XDA ROM Image Tool V1.2)"
is it available here http://lumpistefan.dyndns.org/tools/
:?
That's it. That should work.....
xdaI99 said:
and please tell me what is "XDArit (XDA ROM Image Tool V1.2)"
is it available here http://lumpistefan.dyndns.org/tools/
:?
Click to expand...
Click to collapse
XDArit shoud be old program to write ROMS on SD-Cards.
This tool is included in the XDATools. You can get it also from my site....
Stefan
ok I am going to install special editon rom 1.2 with usb today.
as per following tutorial step.
Backup the existing bootloader and operating system using card reader
---------------------------------------------------------------------
1) Insert a blank SD card into the XDA
2) Do a hard reset (hold on/off key then press the soft-reset button) click on Contacts button and choose 'CE+BOOT TO SD', and press the action button to backup the ROMs.
3) Once complete, remove the SD card from the PPC and insert it into the card reader.
---------------------------------------------------------------------
I have now back of rom in my 256 mb sd card.
after backup my sd card is not redable not in reader and in phone, so confused again and not sure that rom is there or not . please suggest if any other backup method.
ok, as per status if its in sd card then how can I restore is in to the phone again If somthing will happen wrong while installing se_rom_1.2.
You should be able to read the card via XDATools.
The format of the Card is in a special way, to get the bootloader of the xda to read the file and flash it back on your device.
You can test it by pressing power button and doing a soft reset. Then bootloader should come up and will tell you, that he found a ROM on your card and asks you if you want to install it.
Entering the bootloader deletes all data on your device....
But if you're going to flas a new ROM on your device it's not important...
Stefan
I stuck in "Create a V5.15..." pls help
To LumpiStefans and all guys,
Your instruction to unlock SX-56 is impressive. I did perform the "backup ROM" procedure successfully although it quite not the same as you directed, cuz I using ImageTool V1.0.5, but, I stuck in "Create a V5.15 Boot Loader ..." Below are my problems:
1/ I did find the "bootloader_v5_15.nb0 from the self-extracting zip downloadable here in the 'binaries' folder" as you quoted but when I attempt to write to my SD card by Image Tool V1.0.5, I got the message " Unsupported file format, don't know how to how to read the sourcefile..."
2/ Couldn't find XDA ROM Image Tool V1.02. Was it replaced by V1.0.1 or 1.05?
3/ There is no "radio button for 'before 5.17 (1K)'"
3/ therefore, I couldn't do the following steps:
-Select SD Card from the dropdown & Choose 'Write to SD card'
-Click on the radio button for 'before 5.17 (1K)'
-Click the 'Bootloader' checkbox
-Click the '...' button and browse to the 'bootloader_v5_15.nb0' file
-Click 'OK' to write the bootloader ROM to the SD card..
BTW, I did have my new ROM cook downloaded. Just waiting for your suggestion to solve the above problems. Your help is highly appreciated!!!
Big thanks! :wink:

exec radio rom upgade 1.09

Can some one help me, for some reason I tried to sync my exec but the new radio rom 1.09 would not open to downlad to my exec . I was however able to down load the zip file into the pda but when I open it it asks for the application. I opened the application file but not sure which file inside to open the zip file with. can this rom be upgraded this way. help[/b]
From what I know you can't upgrade it that way. You need to connect your Universal to your computer. You can find tons of instructions on how to install it under "Universal Upgrading Forum". You are posting on the wrong one. So you might not get that many help.
You can try this on wiki
Radio only upgrade instructions
http://wiki.xda-developers.com/index.php?pagename=Radio only upgrade instructions
Or Detailed Instruction On How To Upgrade with Bootloader method
http://wiki.xda-developers.com/inde...tion On How To Upgrade with Bootloader method

error 103: ROM IMAGE FILE NOT FOUND

guys help please.... i want to upgrade from wm5 to wm6... i dunno where to post thats why i made it here... thanks
you dont mention what device you have
if you have an htc device and got the rigth rom for it
and get that error when you run the flash tool then
maybe it's because your rom as in the nbf file is not in the
same dir as the flash tool

Can Someone Fetch Me An Official WWE 2.07 ROM NBH?

Hi guys, I'm currently trying to update my Rogers HTC Touch Diamond to the WWE 2.07 ROM which i downloaded from here:
http://forum.xda-developers.com/showthread.php?t=512505
I have HardSPL, and I've updated my radio before, but never ROMs. So When I tried to run this official RUU, it seemed like it started (saw progress bar at 0%), but then my phone resets and the RUU gives me an error message saying "Invalid Model ID" and something like "This utility cannot be used to update your device". How do I get around this?
I read the thread which explains how to get around the invalid model id error, however it requires that I extract the NBH and build a new one. However, I only have the RUU of 2.07, not the NBH. There's one posted in the thread, but it only contains the OS. Can someone please provide me with a NBH for this ROM (Complete with the OS/Splash/etc, but radio and SPL not required)??? Thanks.
hi if you have an official rom which is a EXE file just use winrar to extract the files you need then flash using the internal storage.
I hope this helps you.

No rom can update

I have a cid unlocked artemis,with wm6.0 on it.
I've tried to install more than 10 different rom's(WM 6.1 and 6.5)and i always get either of the 2 following errors:
ERROR 260,and corrupted rom.
Any thoughts?
BTW,i use winvista,and when i flash my asusP535 everything works fine.
download the latest uspl,extract it to a folder,copy the .nbh file from the rom folder to the extracted uspl folder....run the uspl and watch the show
additionally you should go to the wiki or search the forums about vista flashing

Categories

Resources