Can some one help me, for some reason I tried to sync my exec but the new radio rom 1.09 would not open to downlad to my exec . I was however able to down load the zip file into the pda but when I open it it asks for the application. I opened the application file but not sure which file inside to open the zip file with. can this rom be upgraded this way. help[/b]
From what I know you can't upgrade it that way. You need to connect your Universal to your computer. You can find tons of instructions on how to install it under "Universal Upgrading Forum". You are posting on the wrong one. So you might not get that many help.
You can try this on wiki
Radio only upgrade instructions
http://wiki.xda-developers.com/index.php?pagename=Radio only upgrade instructions
Or Detailed Instruction On How To Upgrade with Bootloader method
http://wiki.xda-developers.com/inde...tion On How To Upgrade with Bootloader method
Related
ok heres what happened first i installed hardspl and then i changed my radio to 1.27.14.09 and when i restarted my att tilt the att stuff went on then nothing it never went to the main screen, now how can i reinstall a radio or just the att stock software without using activesync
Go to the bootloader - check the wiki for instructions. Connect your computer to the Tilt - you should see "USB" below the tri-color screen. Install the new ROM or radio. PM me if you have problems.
P.S. The answers to any problems you find are readily accessible in the Kaiser section.
shrshr429 said:
ok heres what happened first i installed hardspl and then i changed my radio to 1.27.14.09 and when i restarted my att tilt the att stuff went on then nothing it never went to the main screen, now how can i reinstall a radio or just the att stock software without using activesync
Click to expand...
Click to collapse
Check the wiki for sd flash. You kan rename the nbh file to KAISIMG.nbh and put it on a sd then goto bootloader and it asks you to install.
im sorry what's wiki and also I can't find software that will let me download the software without activesync does anyone have a link I can use
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
You should be able to find everything you need here.
i tried everything there, theirs just one problem i cant find a rom that i can use without activesync does anyone have one
When you attach the cable and go to bootloader - does it say "USB" below the tri-color screen? If so, you have communication and can flash.
What do your three lines say at the top of the bootloader (red section)?
it does say usb my computer is reading the phone i just cant find a rom that doesnt use activesync, nothing with RUU_Sign.nbh, i did use hardspl the 3 lines say
KAIS1*0 MFG
SPL-1.0.01iPof
CPLD-8
i do have a microsd card i can try and upload it through their but there is stil the problem with no activesync
so can anyone help me here
ok, since i never really seen this question answered directly anywhere, you get this freebie
how to extract the RUU_Signed.nbh file
If its a cooked rom, the file you download will *usually* be a .rar file, extract the contents with winrar. depending on how the cook packaged it, it may not be named RUU_Signed.nbh, but it will still be a .nbh file
If its an original shipped rom, the file you download will be a .exe file, again, extract the contents with winrar. There will be a bunch of files and the RUU_Signed.nbh will be one of them.
if i downlaod the original rom it just opens up a program to install it how can i extract it without using the program to connect to my phone
omg!!!!!
1. install winrar
2. right click on the file you downloaded
3. choose "extract here"
then do the flashing using the microsd card
how do i install/use an nbh file? i looked on the forum and cant find it. please someone either tell me or send me a link explaining how to use nbh files. my computer doesnt recognize the format. thanks.
I suppose you want to upgrade your pda or your phone.
You must use a bootloader to install the file and upgrade your pda. Many bootloaders exist.
For example, I've installed a new ROM with WM 6.1 (from Algasystems) on my iPAQ 4700 and I have used a bootloader that I have found in the thead about my pda (I think I've used MTTY). Than I suppose you can find yours in the thread where you have downloaded your ROM .
To flash .nbh files you need a custom.RUU (Rom Update Utility) .nbh fiels are only flashable to certain devices, i.e. HTC Kaiser, Tilt, TYTNII, etc.
Older devices flash with a variation of this. What is your device type?
I have downloaded the RAR file, but after taking a look at it I can see that it is not like any ROM updates provided by Bell. Can anyon some instruction or point me to another thread that explains this??
Thanks
1)after you download it just extract the file in a new folder
2) Then goto that folder and u will "ROMUpdateUtility" double click on that.
3) just follow the instructions that appears on your computer screen after.
I'm thinking he probably doesn't have WinRAR.
loll thenn ill add another step:
4) download WINRAR and extract the files.
then follow my other other steps.
Do the CDMA Roms require a HARDSPL to flash them? I want to flash a CMDA NSFAN Rom to my friends Vogue and I dont see an stickies for flashing a CDMA rom. I normally spend most of my time in the Kaiser/Raphael Forums.
Any help is greatly appreciated.
Thanks,
Daniel
So I just did a ton of research on the web because the wiki is useless and might as well not exist.
I am using a Sprint HTC Touch with the official Sprint WM6.1 ROM from HTC.
So after my research, this is what I got (Please correct me if I am wrong):
1. Run 2.31.Coke and unlock the phone via USB/ActiveSync
2. Download NSFAN's latest Sprint WM6.1 Rom and extract to desktop
3. Rename ROMFILE.nbh to voguimg.nbh
4. Copy voguimg.nbh to MicroSD card that has been formatted to FAT32
5. Insert MicroSD card in phone, and enter bootloader via holding down the Power/Camera/Reset buttons all together.
6. Flash ROM
7. Hard Reset Phone
8. Enjoy
So to the everyday flasher here on the Vogue forum, are these steps correct? And if so, why dont you take the time to update the wiki so people dont have to ask the same repetitive question 1000 times?
I just cant believe that this forum has zero ROM flashing stickies, or and updated wiki.
Either way, any help would be greatly appreciated.
Thanks again,
Daniel
atomixpaintball said:
So I just did a ton of research on the web because the wiki is useless and might as well not exist.
I am using a Sprint HTC Touch with the official Sprint WM6.1 ROM from HTC.
So after my research, this is what I got (Please correct me if I am wrong):
1. Run 2.31.Coke and unlock the phone via USB/ActiveSync
2. Download NSFAN's latest Sprint WM6.1 Rom and extract to desktop
3. Rename ROMFILE.nbh to voguimg.nbh
4. Copy voguimg.nbh to MicroSD card that has been formatted to FAT32
5. Insert MicroSD card in phone, and enter bootloader via holding down the Power/Camera/Reset buttons all together.
6. Flash ROM
7. Hard Reset Phone
8. Enjoy
So to the everyday flasher here on the Vogue forum, are these steps correct? And if so, why dont you take the time to update the wiki so people dont have to ask the same repetitive question 1000 times?
I just cant believe that this forum has zero ROM flashing stickies, or and updated wiki.
Either way, any help would be greatly appreciated.
Thanks again,
Daniel
Click to expand...
Click to collapse
You are correct, but you do not need to do steps 3 thru 5. After you extract the ROM on your desktop simply doubleclick the RUU utility and it will update your ROM. (you must still be connected via USB to computer) If you want to flash from your storage card instead then do steps 3 thru 7.
I have a bell phone,
and the color screen says .36 and Security Unlocked.
do i have to unlock the phone still ?
its a bell phone, and it was like that when i got it.
does this mean its unlocked?
latinjig said:
I have downloaded the RAR file, but after taking a look at it I can see that it is not like any ROM updates provided by Bell. Can anyon some instruction or point me to another thread that explains this??
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=3680838&postcount=2
Detroit Doug
By the way, who needs WinRAR when you can get 7-Zip, the best all-around file compression/decompression tool around! And it's free. Opens almost anything out there all in one program.
http://7-zip.org/
hey..
i just had a quick question.. is it possible to switch back to the original BELL rom after you upgrade to NFS rom? i know a lot you might think why would you even wanna do that? But I was just wondering just incase..
Absolutely very easy just flash it like the instruction of a stock rom would require you too
Hi guys, I'm currently trying to update my Rogers HTC Touch Diamond to the WWE 2.07 ROM which i downloaded from here:
http://forum.xda-developers.com/showthread.php?t=512505
I have HardSPL, and I've updated my radio before, but never ROMs. So When I tried to run this official RUU, it seemed like it started (saw progress bar at 0%), but then my phone resets and the RUU gives me an error message saying "Invalid Model ID" and something like "This utility cannot be used to update your device". How do I get around this?
I read the thread which explains how to get around the invalid model id error, however it requires that I extract the NBH and build a new one. However, I only have the RUU of 2.07, not the NBH. There's one posted in the thread, but it only contains the OS. Can someone please provide me with a NBH for this ROM (Complete with the OS/Splash/etc, but radio and SPL not required)??? Thanks.
hi if you have an official rom which is a EXE file just use winrar to extract the files you need then flash using the internal storage.
I hope this helps you.
I have a cid unlocked artemis,with wm6.0 on it.
I've tried to install more than 10 different rom's(WM 6.1 and 6.5)and i always get either of the 2 following errors:
ERROR 260,and corrupted rom.
Any thoughts?
BTW,i use winvista,and when i flash my asusP535 everything works fine.
download the latest uspl,extract it to a folder,copy the .nbh file from the rom folder to the extracted uspl folder....run the uspl and watch the show
additionally you should go to the wiki or search the forums about vista flashing