Develop Bugs

exec radio rom upgade 1.09

Can some one help me, for some reason I tried to sync my exec but the new radio rom 1.09 would not open to downlad to my exec . I was however able to down load the zip file into the pda but when I open it it asks for the application. I opened the application file but not sure which file inside to open the zip file with. can this rom be upgraded this way. help[/b]

From what I know you can't upgrade it that way. You need to connect your Universal to your computer. You can find tons of instructions on how to install it under "Universal Upgrading Forum". You are posting on the wrong one. So you might not get that many help.

You can try this on wiki
Radio only upgrade instructions
http://wiki.xda-developers.com/index.php?pagename=Radio only upgrade instructions
Or Detailed Instruction On How To Upgrade with Bootloader method
http://wiki.xda-developers.com/inde...tion On How To Upgrade with Bootloader method

getting vendor id errore while upgrading the official wm6

im using a tytn and getting errore message
dows the official upgrade is for tytn or doopod ?
anyone can help ??
i try using hard sspl and still .. same

I think it may be because it is a rom for Asian networks... I got a similar error, and will have to manually import the settings for my network providor... other than that, everything else went fine...
I believe there are cabs kicking about this forum to auto setup for various providors.. I think it is trying to auto detect your vendor, and if not Asian, is returning the error
I think thats all the error is showing...

If you've downloaded one of the other cooked ROMs on this site, you should have an exe file called RUU_wrapper.exe.
Now, install WINRAR and right click on the dopod rom and choose extract and it will extract various files, one of which will be another exe file. Extract this exe file again and you should end up with a file RUU_Signed.nbh - this is th only file you'll need out of the lot.
You can delete all the other files from the dopod ROM now, just keeping the RUU_signed.nbh. Copy the RUU_wrapper.exe file into the same folder and run it and you will flash the dopod rom to your phone nicely - just make sure you're HARDSPL first!
Now, you could be even smarter at this point and use dutty's good nbhtool if you like to "unwrap" RUU_signed file and remove the IPL \ SPL (though with HARDSPL, I'm not sure this is necessary) and the Radio part if you like (and the boot splash screens if you're so inclined and then use it to wrap it all back up again.
HTH,
Smiffy.

Error, Unknown rom version....(happens to every rom I create now)

I really don't understand what is wrong. All the roms that I create now cannot be created properly. The preconfig wont run, themes wont even apply, and when I try to reflash it with other roms, RUU says unknown version...I had to boot into bootloader to flash it. (without forcing sspl in ruu)
What the heck is happening? I'm cooking the same way i've been cooking (build OS + dutty's nbhtool) I'm getting very frustrated

Which kitchen or base ROM are you using? Need more info of exactly what you are doing!! Does this happen when you flash to official ROMs too?

I've used pandora, hypercore (they are both the same thing really). Both used to work fine, now they no longer work and both gave me the same errors "after" I flashed the rom I made. Here's the outline of the problem:
1) assuming current rom is schaps's 4.01
2) Runs RUU, auto detect fine
3) flash with the rom I made, flash completed, reboot
4) rom doesnt work properly, preconfig doesnt launch at all, tsk doesnt apply properly, and etc
5) run RUU, cant auto detect, "error, rom........."
6) boot to oli 2.10 BL, flash with "any" premade rom
7) repeats #1
The Roms I made were based on ATT's official rom, I've also used vp3g's coz most craps have already been removed.
1) run nbhextract to extract RUU
2) run nbsplit, imgfsfromnb, imgfstonb
3) toss os.nb into hypercore XIP extract, extract XIP
4) put everything into pandora's kitchen (root/ OEM folder, SYS folder, ROM [Os.nb, XIP folder]
5) remove/add stuff, rebuild .dsm if needed
6) run buildOS
7) run createbat
8) run NBtools (left "version as it is", chose hermes100, SuperCID, no ext rom/radio/spl)
9) rom created, then flashed.

I just made a basic rom with pandora. No editing done besides using the oem packages included to make it. Can someone try the rom out and tell me if you are facing the same problem? (Just a bare OS rom)
i.e. after flashing the rom, with active sync connected, RUU gives Error 244 and the only way to reflash it is get into bootloader mode. OR can RUU still work in windows after flashing it?
I need to know if there's something wrong with my bootloader (whether i need to reflash it) or somehow somewhere the kitchen tools that I've been using suddenly just screwed up any help is greatly appreciated
*I only have problems with the roms that I recently created, again, they used to work fine, I have no problems flashing other people's roms*
http://www.sendspace.com/file/3ycn37

I'd delete your HyperCore and Pandora folders and re-extract them from the original downloads to be honest. Whilst I can't think of what might cause the Error 244, I've found myself that after mixing this and that between HyperCore, Pandora and any of the zillions of 'working' folders I've got kicking about I do eventualy end up overwriting something somewhere that needs to be consistent between builds and knacker myself.

I have managed to solve the problem after redumping everything via the original tools. However, I'm still using hypercore kitchen to extract XIP. I no longer use dutty's NBHtool to create the image, I'm not sure if it contributes to the problem, but I'm having great results with nbhgen.
When I'm done cooking my rom, I'll document down everything I know and create my own kitchen.

HTC Diamond SPL File Extracted From ROM

I've succesfully SID unlocked my Diamond and I flashed the following ROM:
QMR_RUU_Diamond_HTC_WWE_1.93.405.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
I now want to extract the SPL and flash it from that ROM. I use this tutorial:
http://forum.xda-developers.com/showthread.php?t=335568
It's pretty simple, but the NBH file I created using HTCRT is 528K and it gives me a message that the NBH is greater than default. In the tutorial it says:
9. You should now have a NBH file that is relatively small (about 258K)
I've tried several ROMs, but with the same outcome.
I haven't flashed it yet, but I don't know what I am doing wrong?

Why are you following Kaiser instructions?
Look here:
http://forum.xda-developers.com/showpost.php?p=2460876&postcount=3
squ1zzy said:
I've succesfully SID unlocked my Diamond and I flashed the following ROM:
QMR_RUU_Diamond_HTC_WWE_1.93.405.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
I now want to extract the SPL and flash it from that ROM. I use this tutorial:
http://forum.xda-developers.com/showthread.php?t=335568
It's pretty simple, but the NBH file I created using HTCRT is 528K and it gives me a message that the NBH is greater than default. In the tutorial it says:
9. You should now have a NBH file that is relatively small (about 258K)
I've tried several ROMs, but with the same outcome.
I haven't flashed it yet, but I don't know what I am doing wrong?
Click to expand...
Click to collapse

ROM is locked from being dumped. The kaiser tut should work isn't it?

Can Someone Fetch Me An Official WWE 2.07 ROM NBH?

Hi guys, I'm currently trying to update my Rogers HTC Touch Diamond to the WWE 2.07 ROM which i downloaded from here:
http://forum.xda-developers.com/showthread.php?t=512505
I have HardSPL, and I've updated my radio before, but never ROMs. So When I tried to run this official RUU, it seemed like it started (saw progress bar at 0%), but then my phone resets and the RUU gives me an error message saying "Invalid Model ID" and something like "This utility cannot be used to update your device". How do I get around this?
I read the thread which explains how to get around the invalid model id error, however it requires that I extract the NBH and build a new one. However, I only have the RUU of 2.07, not the NBH. There's one posted in the thread, but it only contains the OS. Can someone please provide me with a NBH for this ROM (Complete with the OS/Splash/etc, but radio and SPL not required)??? Thanks.

hi if you have an official rom which is a EXE file just use winrar to extract the files you need then flash using the internal storage.
I hope this helps you.