Develop Bugs

XDA OIIi ROM Upgrade

Hello,
Can you tell me how to upgrade my XDA O2i Rom.
I tried English one (Xda_IIi_Upgrade_v111171.exe) it says Country ID Error.
I tried Himalaya (HimaUpgradeUt.exe) it says there is an error occured if default.
This is a handheld of General Director Of our Corporation Bought by me in Russia. It shows Black screen now I have make it working before it is possible
i tried Taiwan they dont pass me to download page because of my IMEI.
What to do?
Help me please!

For your information, XDA IIi also known as HTC Alpine! You can check at Alpine section for any kind of help! About the upgrading ROM, checkout at this link! It was under Alpine Upgrading etc. section
http://forum.xda-developers.com/showthread.php?t=258480
Thanks

Imate jasjar bootloader dead. HELP!!

Dont know why but did a very stupid upgrade yestoday.I think I used a wrong MaUpgradeUt_noid.exe(XDAII version) to flash the wm6 rom for my imate.!!!
There is no bootloader now even I do a POwer+lighting+Softreset. I did a search on the site .I realized that I might damaged my bootloader . also I know it is hard to find a way to fix it by myself. but I 'm still hope someone do a favour!!!
Thanks in advance.
any advise arw welcome to [email protected]

Same with me , Did any one helped u??!!

Big Big Big problem new rom

Good morning all
Is the first time that i write in a forum, i'll try to explain my problem and i hope that somobody can help me.
I'm working in china and one day i lost my thelephone, so i decided to buy a PDA HTC P3300.But only after some day i saw that some thing was not working, so i'm tring to downgrade a new rom.
Here i had my problem, i followed all the details that i found on internet, also i took some informations and file from this forum to coplete the procedure like Hard SPL and so on, the problem is that when activesync is connected to the device i launch for example Hard SPL to upgrade it but after the program showed me the version installated and i said upgrade, i waited for a while and then the progam told me to check the usb connection (i tried whit 3 different cable) ERROR 260.The same thing happened when i tried to change the ROM.
CAN SOMEBODY HELP ME PLEASE?? I NEED THE PDA ALSO FOR WORK.
Thank you everybody!

You might have better luck asking for assistance on this subject in the Artemis upgrading forum:
http://forum.xda-developers.com/forumdisplay.php?f=318

andreazzo said:
Good morning all
Is the first time that i write in a forum, i'll try to explain my problem and i hope that somobody can help me.
I'm working in china and one day i lost my thelephone, so i decided to buy a PDA HTC P3300.But only after some day i saw that some thing was not working, so i'm tring to downgrade a new rom.
Here i had my problem, i followed all the details that i found on internet, also i took some informations and file from this forum to coplete the procedure like Hard SPL and so on, the problem is that when activesync is connected to the device i launch for example Hard SPL to upgrade it but after the program showed me the version installated and i said upgrade, i waited for a while and then the progam told me to check the usb connection (i tried whit 3 different cable) ERROR 260.The same thing happened when i tried to change the ROM.
CAN SOMEBODY HELP ME PLEASE?? I NEED THE PDA ALSO FOR WORK.
Thank you everybody!
Click to expand...
Click to collapse
Hard Spl??? For the Artmes?? Mate are you trying to brick your device cause it seems you are doing a pretty good job of it too,Hard Spl is NOT for the p3300 it is for the Hermes and Trinity which are two very very different models of HTC. Please make an effort to read the Wiki before you start messing with the phone.Try flashing the t-mobile stock rom FOR THE ARTEMIS(WITHOUT THE HARD SPL) and hopefully it may work also find out from your buyer if it is CID unlocked though i doubt wether they would know.

Check in Settings - Connections - USB to PC that the USB advanced network functionality is not ticked. That's caught me out in the past after making changes.
This is assuming that others in this forum are correct and you've not yet made a brick using the wrong model. Good luck!

One problem more on rom
Thanks all for your answers
sorry but i still had one problem more
As arvind09 said i read almost all Wiki before do some other stupid things, i downloaded anhoter rom from this page:
http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
but the rom that i found is HTC rom 1.12.405.101, and is not working on my artemis, i looked in my system and i saw that i need this ROM 1.13.110.101
wich is not downloadable form that page. (AM I RIGHT?)
May i know where i can find the rom T-mobile 1.13.110.101 ?
If i wrong some other things could you advise me.
Thank you again and sorry for my incompetence
Bye

andreazzo said:
Thanks all for your answers
sorry but i still had one problem more
As arvind09 said i read almost all Wiki before do some other stupid things, i downloaded anhoter rom from this page:
http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
but the rom that i found is HTC rom 1.12.405.101, and is not working on my artemis, i looked in my system and i saw that i need this ROM 1.13.110.101
wich is not downloadable form that page. (AM I RIGHT?)
May i know where i can find the rom T-mobile 1.13.110.101 ?
If i wrong some other things could you advise me.
Thank you again and sorry for my incompetence
Bye
Click to expand...
Click to collapse
Try the thread by bdangol in this forum,he has posted the link to the 1.13.110.101 rom,all the best.

arvind09 said:
Try the thread by bdangol in this forum,he has posted the link to the 1.13.110.101 rom,all the best.
Click to expand...
Click to collapse
T-Mobile Here

Did you buy it in China?
If you bought the phone in China, there will be 2 versions. 1 for the chinese market (han huo) and the others are for other markets (usually europe) then flashed with the chinese rom (shui huo). As far as I know the chinese versions aren't locked and the foreign market versions musn't be locked either due to the fact that they have to put on the chinese rom

Help Please......!!! P3400 (old Gene) stuck at bootloader...!!!

hi...
please someone help me,
today i upgraded to a new wm6.1 Rom for HTC P3400 which was posted in gene forum here at XDA Developers , after successful upgrade my phone restarted n got stuck at bootloader.
i hv tried almost every solution avaible at Forum XDA developers, but still same condition.
i hv hard reset it several times, also gave unsuccessful try to Mtty , and gene unbreak.
please someone tell me how to unbreak my device, becuz i hv gone through almost every solution, but nothing working.
ther is solution for newer genes in "Gene Forum" but tht also not workin on my old gene.
and please tell me that can i send it to HTC india, as it is still under warrenty.
i m afraid that they wont repair it as i was using custom wm 6.1 roms
so please somebody help me out. i m really in grt tension....

hksin1988 said:
hi...
please someone help me,
today i upgraded to a new wm6.1 Rom for HTC P3400 which was posted in gene forum here at XDA Developers , after successful upgrade my phone restarted n got stuck at bootloader.
i hv tried almost every solution avaible at Forum XDA developers, but still same condition.
i hv hard reset it several times, also gave unsuccessful try to Mtty , and gene unbreak.
please someone tell me how to unbreak my device, becuz i hv gone through almost every solution, but nothing working.
ther is solution for newer genes in "Gene Forum" but tht also not workin on my old gene.
and please tell me that can i send it to HTC india, as it is still under warrenty.
i m afraid that they wont repair it as i was using custom wm 6.1 roms
so please somebody help me out. i m really in grt tension....
Click to expand...
Click to collapse
READ and SEARCH before posting
Check here: http://wiki.xda-developers.com/index.php?pagename=HTC_Gene
I don´t think you need to send it to warranty
Good luck,

orb3000 said:
READ and SEARCH before posting
Check here: http://wiki.xda-developers.com/index.php?pagename=HTC_Gene
I don´t think you need to send it to warranty
Good luck,
Click to expand...
Click to collapse
Dear Friend,
thanks for ur response ,
i spent more than 2 Days completely in searching n trying methods given in this forum.
i tried hspl by SD card also but it says some certificate error. and reformated it several times by pressing both "-" keys n power key at same time...
but after format still same problem exist.
most of the methods given in forum are for unbricking New Gene, which is P3400i
so all these methods are showing error to my phone.
please tell me some way to unbrick my device.
previously i was using wm6.1 fusion , than i upgraded to WM6.1 stock, this is when my device got bricked....now m very afraid..
atleast tell me please that if i send my phone to HTC, for repair, will they accept this or not .
becuz i was using unofficial wm6.1, so would this void warrenty or not ???
since upgrade to rom from PDAViet my 1st boot screen got changed to "Smart Mobility" screen. is ther any way to restore my original wm5 HTC logo white screen ????
and yea/...i also tried downgrading to stock wm5 rom (P3400 - 24 March 2007)
but it always say "Invalid Vendor Id" n phone gets rebooted.....
i guess m in really big trouble......please guys....help me out.......

Any Solution ???
Hi Guys...please tell me wht can i do to unbrick my phone......please help me out buddies..!!!
any help is appreciable..........

[Need Help] - HP iPAQ hx2490c

Im using hx2490c with originally WM 5.0
about 1 week ago, i accidentally try to flash to WM 6.5 (Spiaatie version) without notice my model not supporting that version. And i did not backup my original rom. When i try to hard reset, my screen goes blank, white screen.
I already try to search at HP website but not find anything. I try to contact HP Support, but they said no support for illegal ROM flash...
can anyone help me to resolve my problem? is anyone have backup for WM 5 ROM @ ROM dump. please share with me... please...

I will be able to help You if someone will post a hx2490c or hx2790c ROM DUMP

Thanks alot bro... i already read at your treat... u my hope... hu hu hu

ipaq 2790c
I have the same issue with Ipaq hx2790c and would appreciate if someone posts a link with the original rom.

Hey guys,
try that ROM:
http://rapidshare.com/files/110252765/iPAQ_hx2000_6.01.02_WM6.1.rar.html
Cheers

FaCeOff said:
Hey guys,
try that ROM:
http://rapidshare.com/files/110252765/iPAQ_hx2000_6.01.02_WM6.1.rar.html
Cheers
Click to expand...
Click to collapse
If I remember right - this is an old PDAVIET rom and this will not work on c series iPAQs.

Do not upgrade ipaq 2790c!
No good for 2790c, and I do advise that no one should attempt any ROM upgrades for that particular model. I am currently suffering the consequences of such upgrade. Still searching for anyone with original ROM to resurrect my baby!

hx2490c rom dump
i have recently tried to flash mine just the same and just the same got the white screen. now here is the bit of good info that i have. I have my model that is bricked and i also purchased my wife one of the same. HERS IS IN PERFECT WORKING ORDER! how do i create a rom dump for it so you can post it on here and help everyone out.

Is there a way to port android on the 2490c
Sent from my SAMSUNG-SGH-I897 using XDA App