how can i get the NBF-file password? - Upgrading, Modifying and Unlocking

hi
is there a tool to get the password?
i saw a tool to get a password if the file is XOR crypted, but no tool for normal passwords.
any idea?
cu assetburned

Related

Solution for Navman GPS

Please get the file http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
- Copy the file EnableCharPin.exe to you PDA
- Start the bonding dialog until you get the password screen
- Now launch the explorer and start the executable (you will get a small message)
- Get back to the password screen (if you don't find it click on the BT icon in the today screen)
- Characters are now enabled
To Gary: I replied to your mail but I get the following error: The destination server for this recipient could not be found in Domain Name Service (DNS). Please let me know if this solution works for you.
Best regards,
Tobias
i need your help with the bt patch
Hi,
I have downloaded the file from
http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
and looked for the exe file, to run in my xda2.
The exe is a PC installer (didn't work in my xda - not a valid win32 app...)
I finished the installtion process, and now in my add / remove programs i have "Bluetooth Character Password Enabler".
But when i'm trying to bond with my Navman,
still only numbers can be entered. :roll:
Any idea?
(maybe someone have the EXE to run on my ppc, not the installer?)
Thanks in advance,
Tomer
This is a bit unclear, I used towa´s patch like said earlier, followed exactly the instructions and could enable the charpin, and enable my navman
just download and COPY the patch to your xda true activ sync or whatever, and the start the bonding procedure, and when the screen for the pasword comes up, you lanch the explorer on your xda look for the charenable pin, click on it, it will give the message charpin now enabled, close the explorer and type in NAVMAN in big font, and it works perfect.
let us know if you got it to work
Thanks for you quick response.
I tried to do the process as explained:
copyed the file EnableCharPin.exe into my ppc
(via active sync), turned on my navman,
start BT, look for devices, found the navman gps one, next,
and now when the password screen appears i went to "my documents", clicked on the file, and than the error message 'EnableCharPin' is not a valid Pocket PC application" appears.
Any idea?
I saw a post in the forum about registry key or hack, to enable it,
whithout further information.
Thanks,
Tomer
Problem with EnableCharPin
The work that has gone into tying to solve the issue is impressive.
Unfortunately I have the same experience with the response 'EnableCharPin' is not a valid Pocket PC application'
Does anyone have a way to accomplish inputting alpha characters via changes in the registry?
ROM 1.52.00WWE date 10/23/03
Radio 1.05.15
Protocol 1337.15
ExtROM 1.52.86
Regional settings Swedish
Rgds
I have NAVMAN GPS and have the same error. Can anyone explain how is it possible that one can run Windows installer on XDA??
I have just installed this WIDCOMM BT manager. This thing at least is not asking for any pincode so I can easily establish the connection but later on i am not getting any data on the port. I am using ArcPad application by ESRI and I am supposed to use port 8 for GPS.
Can anyone tell me why there is no data comming thru the port?
Another problem is that the connection is lost after few minutes...
it works 4 me now
I did hard reset (upgraded my os / radio to 1.66.00 , 1.10.00)
disabled multilingual support,
installed the exe (FROM MY PC, NOT FROM THE DEVICE ITSELF),
and it solved the problem.
In the pairing process I managed to write NAVMAN (capital letters!),
without any problem
I hope it helps...
Tomer
Re: it works 4 me now
Hey Tomer !
Thanks for your tip. I have had problems with the connection, but I used your tip, and now it works perfect.
tomerbn said:
I did hard reset (upgraded my os / radio to 1.66.00 , 1.10.00)
disabled multilingual support,
installed the exe (FROM MY PC, NOT FROM THE DEVICE ITSELF),
and it solved the problem.
In the pairing process I managed to write NAVMAN (capital letters!),
without any problem
I hope it helps...
Tomer
Click to expand...
Click to collapse
Navman bonding
I dont have a problem getting the XDA II to bond with it, the problem I have is I can only select Com 7 in the Bluetooth tools menu and when I go to set up the GPS in Smartst it wont let me select Com 7.
Anyone have any ideas
I have a XDA and a Navmann 4100. A couple of weeks ago my Navmann dealer sent me the patch EnableCharPin & BTHTools1012 and I started the bond between the PPC and the 4100 and all went fine but a couple of days ago I suffered and full reset on the ppc and now I can not bond the ppc and the 4100 anymore.
Can someone tell what shall I do to bond once again the ppc and the 4100?
I have tried several times with the same process as before (EnableCharPin & BTHTools1012) but I had no succes, the ppc does not allow me to write Navmann, it only lets me write numbers.
towa said:
Please get the file http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
- Copy the file EnableCharPin.exe to you PDA
- Start the bonding dialog until you get the password screen
- Now launch the explorer and start the executable (you will get a small message)
- Get back to the password screen (if you don't find it click on the BT icon in the today screen)
- Characters are now enabled
To Gary: I replied to your mail but I get the following error: The destination server for this recipient could not be found in Domain Name Service (DNS). Please let me know if this solution works for you.
Best regards,
Tobias
Click to expand...
Click to collapse
I had this same problem when I had to do a hard reset with mine couldnt get it to rebond. The only way I managed it was to re install the character enable program. It seems to be specific on which order you do it unfortunately I cant remember what it was. I had to try it a few times myself for it to work.
The way I have managed to do it in the past is to make sure the PPC device is connected to your PC via active synch when you attempt to enter the characters (NAVMAN) That seems to in some way enable the enablecharaterpin software on the PPC. Let me know how you get on.
navman
probably the wrong place to ask but could that be used with the palm os ? ie charpin .exe
rudey wrote:
probably the wrong place to ask but could that be used with the palm os ? ie charpin .exe
Click to expand...
Click to collapse
Hi Rudey
Hard to say... I believe that a guy called towa wrote this for PPC, but if you look up his user name here and e-mail or PM him he might know
Hope that helps
Regards
Chris
Navman GPS One
Is it possible to get my 'old Navman GPS One' to work with my new Nokia N73?
Best regards
Martin
Enable CharPin
hi there
i tried a few links but i am unable to download Enable CharPin.zip from any for the link please can anyone help
many thanks

need password for Xda_IIi_LaunchROM_v1.10.124

I was tried to open
Xda_IIi_LaunchROM_v1.10.124
(http://www.my-xda.com/downloads/Xda_IIi_LaunchROM_v1.10.124.exe)
with Windows Mobile 2003 - ROM Editor but the password was wrong(the following passoerds weretried '0x20040304', '0x89124137', '921211', 'HTC' but none seemed to work. If you are sure this is a WM2003 update file you can try to enter an alternate password.)
Anybody know the password??? please help

Mobile locked on welcome page

... after a wrong change in shellres.dll.049.mui !
The hex editor seems not so good... Maybe I didn't use it properly.
Activesync cannot detect the mobile because of that change.
I have the right file on my computer and on my phone (in Temp folder).
I have not safe mode tool installed on the mobile.
I think that a hard reset is not useful because I changed a ROM file.
So, how to recover the file ?
Thanks for your help !
closed because of thread duplication

How to bypass "version error" from bootloader (eboot.nb0)?

Dear all,
I am trying to bring to life an old WM2003SE pocket pc by flashing it. However, I am unable to bypass the "version error" warning. Please have a look at the attached image from a hex editor locating the "version error" text. I would be grateful if someone can tell me how to bypass this warning by editing the bootloader file eboot.nb0 (attached).
Cheers,
Jay
PS: let me know if more info is required.

i need to change a value For metered connection which is giving an error.

i need to change the value
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\DefaultMediaCost
and the reg key is "3g"
Default value is 2..i want to make it 1.
i tried Interop tools registry editor( not browser) option.
but that was giving an error.
help me if u can...
 @gus33000 sry to mention u bro..but u r the god of wp registry
Is restore ndtk on or off? If it's off then turn it on and reboot, then try again.
That's most likely why you're getting an error.
tried that..no luck..the error is "Write failed.debug error." now i will try with import reg..maybe that can help.btw thanks br0 @gus33000
What version of the app are you using and what reg type did you select too?
i m using interop tool 1.9 pre 7..and the value type is Dword
What's your phone model and can you screenshot the editor page without the error popup so I can see what you filled in.
Sure..i m using lumia 730..btw i can't upload pic here in comment..check this link image http://uploadpie.com/mHUd5
the key seems write protected, your best bet would be using TSHELL or SSH and reg.exe to change the value.
maybe then i should try with cmd access/ssh or telnet....btw thanks bro giving it a try..and i found the key in a blog ..the key is for turned a meter connection into non-metered on a pc..hope this also works for mobile too
@gus33000 hey bro i m trying with reg.exe .but can u tell me the command please fro changing the value.thanks
just lookup the help, can't remember it atm
i got the command ..but still access denied warning.i think tshell will work.can u please give me any procedure to connect phone with tshell..??or any link to do that..?? @gus33000
no if SSH doesn't work then tshell won't either.
well then is there any way to change Software config(system>windows>system32>config>software) file??i know it require Mass storage mode.but if there any other procedure.
apart from UMS (UEFI Mass Storage), nope
bad luck..btw thanks..

Categories

Resources