Please can someone help me,
i performed a update , and during the process, my pc got somehow stuck and i had to perform a reset, which menat that my xda stopt upgrading , and all this happend halllf way the upgrde.
evry time i start up my xda it starts upgrading and stopping at 16 procent , can some one tell me what to do , for i am desparate and want my xda working again.
regards ppeter
[email protected]
If your boot loader is still in tack you're still in good shape!
To check hold down your power button and do a soft reset, this well
put you in boot loader mode ( to exit boot loader mode just do a normal
soft reset).
Ok now if your boot loader is still in tack trying doing the upgrade
using the SD card boot loader method (for info on this method do a search
on the subject in this forum).
HTH
if you have all dead phone, upgrading failure and bootloader broken as well. I could help you to save the life of XDA.
Need help from cgigate
cgigate said:
if you have all dead phone, upgrading failure and bootloader broken as well. I could help you to save the life of XDA.
Click to expand...
Click to collapse
I need help recovering from failed MDA upgrade. I have GSM Error. Where did cgigate go? E-mail addresses bounced back.
Re: Need help from cgigate
klevans69 said:
cgigate said:
if you have all dead phone, upgrading failure and bootloader broken as well. I could help you to save the life of XDA.
Click to expand...
Click to collapse
I need help recovering from failed MDA upgrade. I have GSM Error. Where did cgigate go? E-mail addresses bounced back.
Click to expand...
Click to collapse
my email works fine!
SPV M1500
cgigate said:
my email works fine!
Click to expand...
Click to collapse
cgigate,
My device is stuck on Serial and USB screens.
How can I recover? My misfortune came in the process of ROM upgrade which failed.
YOSEFE
Qman said:
Ok now if your boot loader is still in tack trying doing the upgrade
using the SD card boot loader method (for info on this method do a search
on the subject in this forum).
Click to expand...
Click to collapse
I searched, couldnt find anything, got a link?
YOSEFE said:
cgigate,
My device is stuck on Serial and USB screens.
How can I recover? My misfortune came in the process of ROM upgrade which failed.
YOSEFE
Click to expand...
Click to collapse
flash your original rom
cgigate said:
if you have all dead phone, upgrading failure and bootloader broken as well. I could help you to save the life of XDA.
Click to expand...
Click to collapse
Hi cgigate, I need your help. My Atom now is dead due to upgrading. Please help, what must I do?
cgigate said:
if you have all dead phone, upgrading failure and bootloader broken as well. I could help you to save the life of XDA.
Click to expand...
Click to collapse
I have he same problem. No bootloader and non working PDA. Can you help? Please.
i have all dead phone, upgrading failure and bootloader broken as well.
cgigate said:
if you have all dead phone, upgrading failure and bootloader broken as well. I could help you to save the life of XDA.
Click to expand...
Click to collapse
i have this problem please help ..my XDA exec is dead from upgrading ( 1.13.188 ) help : dekyprio..
Related
Hi,
I tryed to upgrade to WM6 but I think I tit someting wrong, I flasht my
old WM5 back but now it is not possible to try flashing to WM6.
stuck in new 3.03.0000 bootloader.
I hope somebody can help me, thanks
Theo
are you stuck in bootloader, or were you successful in flashing WM5 ROM? also, please please PLEASE read the threads in this forum before posting. You are the millionth customer to post this issue
Come on guy, if you can write, i suppose that you can read HERE ...
racerx_ said:
are you stuck in bootloader, or were you successful in flashing WM5 ROM? also, please please PLEASE read the threads in this forum before posting. You are the millionth customer to post this issue
Click to expand...
Click to collapse
I was success full in flashing the WM5 rom back on the device, now I am trying to install hard SPL and WM6 as describe on TRINITYGUIDES.INFO but stuck by the start.
Hard SPL will not flash I see on my Red,Green,Blue screen IPL-SSPL, SPL-1.07.ds , yes I am new with this matter an my English is not too well but please.
please state what the problem is when you try to flash
racerx_ said:
please state what the problem is when you try to flash
Click to expand...
Click to collapse
When I start to flash the sync. is oke but when the bootloader screen appears the flashing stops and the PDA is not connected anymore.
Try to launch again your update while you're in bootloader mode...It should work !!
shym said:
Try to launch again your update while you're in bootloader mode...It should work !!
Click to expand...
Click to collapse
I just did it but when my device is in bootloader mode there is now
connection with my notebook (VISTA) anymore. When I restart my
PDA the connection is established.
there is a wiki guide to flashing under vista..
please note, that when you start the updater, and your device goes in to bootloader, it times out. So connection is lost. Simply start the update again, with device still connected in bootloader
racerx_ said:
there is a wiki guide to flashing under vista..
please note, that when you start the updater, and your device goes in to bootloader, it times out. So connection is lost. Simply start the update again, with device still connected in bootloader
Click to expand...
Click to collapse
Yes I did already as you describe the result is still no connection (error).
hmm... i think you're gonna have to use Pof's splxploit to load hard-spl and then flash another ROM from there.
It's a question of whether SPL 3.03 is exploitable in the same way...
theovdb said:
I was success full in flashing the WM5 rom back on the device, now I am trying to install hard SPL and WM6 as describe on TRINITYGUIDES.INFO but stuck by the start.
Hard SPL will not flash I see on my Red,Green,Blue screen IPL-SSPL, SPL-1.07.ds , yes I am new with this matter an my English is not too well but please.
Click to expand...
Click to collapse
you need to use the active sync after you load wm5 ... that's the trick..
Hello,
I have allways start the update twice, Once where the device starts in this 3-Colors boot screen and a second time to start the Flashing process.
Do not tuch the device Just clos update application on Windows PC and restart it and go through the question process until it starts to flash
Hope it helps for you
Robidog
banzro said:
Hello,
I have allways start the update twice, Once where the device starts in this 3-Colors boot screen and a second time to start the Flashing process.
Do not tuch the device Just clos update application on Windows PC and restart it and go through the question process until it starts to flash
Hope it helps for you
Robidog
Click to expand...
Click to collapse
Thanks guys for all your help but the problem still exists, I keep looking
to this forum and hope in time the problem will be solved.
Thanks a lot
theovdb said:
Thanks guys for all your help but the problem still exists, I keep looking
to this forum and hope in time the problem will be solved.
Thanks a lot
Click to expand...
Click to collapse
Hello,
Explain me the Problem a bit more cloaser (step by step what you are doing)
error messages, and also what image you had bevore on it, I need also to know which which version is written on the 3-colored screen...
Look forward to her from you...
stepw said:
It's a question of whether SPL 3.03 is exploitable in the same way...
Click to expand...
Click to collapse
the answer is yes, splxploit works in new bootloader too.
racerx_ said:
the answer is yes, splxploit works in new bootloader too.
Click to expand...
Click to collapse
the answer is no splxploit not works on SPL 3.03 on my device
So what did you do to fix this ??
shym said:
So what did you do to fix this ??
Click to expand...
Click to collapse
On this moment nothing, I did something wrong by flashing the first time
and now I am stuck in SPL 3.03. I think the best what I can do is waiting for
the official rom from HTC.
I've tried to install a SSPL and HardSPL to my Diamond with the instructions of
http://forum.ppcgeeks.com/showthread.php?t=35839
Before flashing, my Diamond died !
Power OFF OFF, no soft reset, no hard reset, no bootloader mode, no charging battery.
HELP !!!!!!!!!!!!!!!!
Is your diamond CDMA or GSM?
My guess is you flashed the CDMA SPL on a GSM diamond.
Say Amen.
adwinp said:
Is your diamond CDMA or GSM?
My guess is you flashed the CDMA SPL on a GSM diamond.
Say Amen.
Click to expand...
Click to collapse
My english is bad !
I have a Diamond DIAM100 with UMTS operator . Is GSM or CDMA ?
adwinp said:
Say Amen.
Click to expand...
Click to collapse
What means say amen ???
My warranty is valid or not ?
Can HTC assistance suppose that I've installed HardSPL ? The Diamond doesn't power ON !
If you have to insert a sim card: it's GSM, if not: it's CMDA
To come back to your problem: if you can't boot into the bootloader: there is currently no way to restore.
You at least have to have a working bootloader to be able to restore the phone.
The only way restoring a non-booting device would be by using JTAG test points, which to my knowdge aren't released yet for the diamond.
Sorry for the bad news,
Regards,
EquinoXe
the-equinoxe said:
If you have to insert a sim card: it's GSM, if not: it's CMDA
To come back to your problem: if you can't boot into the bootloader: there is currently no way to restore.
You at least have to have a working bootloader to be able to restore the phone.
The only way restoring a non-booting device would be by using JTAG test points, which to my knowdge aren't released yet for the diamond.
Sorry for the bad news,
Regards,
EquinoXe
Click to expand...
Click to collapse
BAD NEWS !
tinzy71 said:
What means say amen ???
My warranty is valid or not ?
Can HTC assistance suppose that I've installed HardSPL ? The Diamond doesn't power ON !
Click to expand...
Click to collapse
If the device doesn't boot into bootloader, it's not possible to read the SPL, so there is no way (apart from jtag) to determine that the device had HARD SPL.
To my knowledge, HTC's RMA III doesn't use JTAG at all (this is only done in the factory).
They replace mainboards when there s a corrupt bootloader (as in your case).
(if this falls under waranty I realy don't know, there are different reports sometimes they do it under waranty, sometimes they don't..)
tinzy71 said:
What means say amen ???
My warranty is valid or not ?
Can HTC assistance suppose that I've installed HardSPL ? The Diamond doesn't power ON !
Click to expand...
Click to collapse
don't worry me too i had like this and i send back to my warranty and they make't !!!!
the-equinoxe said:
If the device doesn't boot into bootloader, it's not possible to read the SPL, so there is no way (apart from jtag) to determine that the device had HARD SPL.
To my knowledge, HTC's RMA III doesn't use JTAG at all (this is only done in the factory).
They replace mainboards when there s a corrupt bootloader (as in your case).
(if this falls under waranty I realy don't know, there are different reports sometimes they do it under waranty, sometimes they don't..)
Click to expand...
Click to collapse
Tell me more about JTAG, give me a link in order to begin. Thanks in advance !
tinzy71 said:
Tell me more about JTAG, give me a link in order to begin. Thanks in advance !
Click to expand...
Click to collapse
JTAG is a complicated way of directly connecting the cpu of your device to a pc.
You can search the forum or HTC hermes or HTC universal JTAG to see how it's done.
However, it's difficult, dangerous etc..
You have to know your electronics!
You are better of if you'd send the device in for waranty.
Send it in for warranty, if it's repaired: GOOD if it's not: but at least u tried.
If u flashed anything not-official (official=downloadable from htc e-club) then your phone has voided warranty, but maybe they don't notice.
Thom4s said:
Send it in for warranty, if it's repaired: GOOD if it's not: but at least u tried.
If u flashed anything not-official (official=downloadable from htc e-club) then your phone has voided warranty, but maybe they don't notice.
Click to expand...
Click to collapse
I hope it ...
A Stupid question....
...is your diams fully charged ? Sorry but it's happened yet .
sandy2626 said:
...is your diams fully charged ? Sorry but it's happened yet .
Click to expand...
Click to collapse
No, last image was 55%
Only warranty. You haven't flashed any rom or something else. Just say that it stopped working yesterday, when you was playing music and it stopped. Do not tell that you've played with hspl !!!!
borce_razor said:
Only warranty. You haven't flashed any rom or something else. Just say that it stopped working yesterday, when you was playing music and it stopped. Do not tell that you've played with hspl !!!!
Click to expand...
Click to collapse
Tomorrow i'll do it. Thanks
Hello... I have a galaxy note i717. It don't turn on. When you push the power button, it vibrates and show "samsung" for a second, then vibrates again and show "samsung" again. It is cycled in this. Someone know what are happening and How to solve?.
Thanks
lmoyrajo said:
Hello... I have a galaxy note i717. It don't turn on. When you push the power button, it vibrates and show "samsung" for a second, then vibrates again and show "samsung" again. It is cycled in this. Someone know what are happening and How to solve?.
Thanks
Click to expand...
Click to collapse
tell more about ur tablet condition
root, unlock bootloader and etc .... ??!
anyway flash Stockk ROM will help you.
download a stock firmware
run flash tool
and then choose ROM file and w8 for pass :good:
x102x96x said:
tell more about ur tablet condition
root, unlock bootloader and etc .... ??!
anyway flash Stockk ROM will help you.
download a stock firmware
run flash tool
and then choose ROM file and w8 for pass :good:
Click to expand...
Click to collapse
Hello x102x96x... I receive the phone with the problem. So I don't know if it had root. I tried with odin 1.85. But when it finish and the phone restart it back at the same error. Can you tell me if I have to use another way?. Thank you
lmoyrajo said:
Hello x102x96x... I tried with odin 1.85. But when it finish and the phone restart it back at the same error. Can you tell me if I have to use another way?. Thank you
Click to expand...
Click to collapse
explain more about ur tablet
unlock bootloader?
root?
& ... ?!
lmoyrajo said:
Hello x102x96x... I receive the phone with the problem. So I don't know if it had root. I tried with odin 1.85. But when it finish and the phone restart it back at the same error. Can you tell me if I have to use another way?. Thank you
Click to expand...
Click to collapse
You just got the device.. Stop messing with it and return it to the store .. Exchange it before you do anymore damage. Simple.. Easy.... Requires no thought at all.
alynch75 said:
You just got the device.. Stop messing with it and return it to the store .. Exchange it before you do anymore damage. Simple.. Easy.... Requires no thought at all.
Click to expand...
Click to collapse
Thanks... but I bought it used full working. I sell it to another person and after 3 days the phone began with this problem. I'm trying to help and know how to solve. To me is very important because the buyer is a friend.
Please help
x102x96x said:
explain more about ur tablet
unlock bootloader?
root?
& ... ?!
Click to expand...
Click to collapse
Well, I don't know that information, because I never use it. I only unlocked it by imei with a unlock code. I bought it used and in working conditions and then I sell it to a friend. After 3 days it began with the problem and we don't know how to solve.
At the begining I tought hardware problems with the power buttom... something like stun button, because I had a galaxy s2 with that problem, but it is not possible because I can put it in download mode and it do all the process with odin.
lmoyrajo said:
Well, I don't know that information, because I never use it. I only unlocked it by imei with a unlock code. I bought it used and in working conditions and then I sell it to a friend. After 3 days it began with the problem and we don't know how to solve.
At the begining I tought hardware problems with the power buttom... something like stun button, because I had a galaxy s2 with that problem, but it is not possible because I can put it in download mode and it do all the process with odin.
Click to expand...
Click to collapse
it s boot-loop (Soft Bricked) and almost of time it solve with flashing stock rom
if u want to solve it by urself u must to test
test another ROM
test flashing kernel
and all official**
after flashing kernel if still not working pick it to some services they should use Box & etc to repair it
:good:
lmoyrajo said:
Hello... I have a galaxy note i717.
Click to expand...
Click to collapse
This is the forum section for the Galaxy Note 8 tablet. You'll get a lot more help in the correct forum section.
redpoint73 said:
This is the forum section for the Galaxy Note 8 tablet. You'll get a lot more help in the correct forum section.
Click to expand...
Click to collapse
Thanks... I'll put it on the correct.
x102x96x said:
it s boot-loop (Soft Bricked) and almost of time it solve with flashing stock rom
if u want to solve it by urself u must to test
test another ROM
test flashing kernel
and all official**
after flashing kernel if still not working pick it to some services they should use Box & etc to repair it
:good:
Click to expand...
Click to collapse
x102x96x do you know a secure site to download more roms?
lmoyrajo said:
x102x96x do you know a secure site to download more roms?
Click to expand...
Click to collapse
sammobile.com
OEM battery was replaced with new batteries bought off amazon. After the new update, suddenly it started randomly rebooting on me. and next thing it knew, if would show me a Samsung Logo screen and be stuck on it.
I saw some suggestion and I did the remove battery and held the power button and down vol. it reboots.. and every it auto restart and goes to the downloading screen... i just remove the batter and restart the process.
I accidentally on my reboot select the boot from bootloader, and from there it Hardbrick. It no longer turns on, as good as dead, but when I plugged into the PC... I hear 3 beeps... and QHSUSB_BULK driver not found.
I bought a jig, and see if it would help me go into the Bootup Mode, but it was still unresponsive
I was hoping if anyone is able to offer me some guidance
we are able to unbrick it
......if we had someone to help use with the development by just spending the extra few minutes on helping us
What kind of help do you need?
I saw post about Jtag service saying that they cab fix it, should I give them a try?
I have a device that did the same exact thing. Started acted funny, then just hardbricked on a battery pull. Same error message on computer when plugged in, despite locating correct drivers, etc. I am really upset because I've lost a lot of pictures and videos of my little girl. I wrote to a jtag repair person & they felt jtag would not help. And of course I've done all the usual stuff, new battery, all the button combos, etc. It's deader that a door nail, no charging light, vibrations, nothing. I've not dropped it, gotten it wet, nothing.....it just died. And a few few days short of my upgrade, too! Go figure. Anyhow, if ANYONE can PLEASE offer any help, that would be awesome. Even if just as much for me to recover my pics from the emc.
XenophobiaDX said:
What kind of help do you need?
I saw post about Jtag service saying that they cab fix it, should I give them a try?
Click to expand...
Click to collapse
we all know about JTAG
but we want a person who owns an AT&T Samsung Galaxy Note 4 who is still in Android Lollipop
Because if we found a person on it
we can create an unbrick image to boot it
alexanderdab said:
we all know about jtag
but we want a person who owns an at&t samsung galaxy note 4 who is still in android lollipop
because if we found a person on it
we can create an unbrick image to boot it
Click to expand...
Click to collapse
right here. Just dont know how
viewsfromthepi said:
right here. Just dont know how
Click to expand...
Click to collapse
what version of Android are you on?
AlexanderDAB said:
what version of Android are you on?
Click to expand...
Click to collapse
Lollipop
viewsfromthepi said:
Lollipop
Click to expand...
Click to collapse
what is your Baseband version
alexanderdab said:
what is your baseband version
Click to expand...
Click to collapse
n910aucu2doi3
viewsfromthepi said:
n910aucu2doi3
Click to expand...
Click to collapse
can you temp root with Kingroot
AlexanderDAB said:
can you temp root with Kingroot
Click to expand...
Click to collapse
Yes
viewsfromthepi said:
Yes
Click to expand...
Click to collapse
If you have a computer, and if you can root with kingroot
Use the batch file on a Windows based computer
And please create the unbrick image
Please, for everyone who has a bricked AT&T Note 4
And link me to the unbrick image
AlexanderDAB said:
If you have a computer, and if you can root with kingroot
Use the batch file on a Windows based computer
And please create the unbrick image
Please, for everyone who has a bricked AT&T Note 4
And link me to the unbrick image
Click to expand...
Click to collapse
Question. Will my information be copied?
viewsfromthepi said:
Question. Will my information be copied?
Click to expand...
Click to collapse
It will not, it only copies the Bootloader mechanisms into an image
AlexanderDAB said:
It will not, it only copies the Bootloader mechanisms into an image
Click to expand...
Click to collapse
Ok. Will upload when I have a chance
viewsfromthepi said:
Ok. Will upload when I have a chance
Click to expand...
Click to collapse
THANK YOU
I NEED TO UNBRICK THE PHONE ;u;
I hope my work can help the community can help to root this phone
Its been 2 Years, 3 Months and 20 Days since this phone came out
viewsfromthepi said:
I hope my work can help the community can help to root this phone
Its been 2 Years, 3 Months and 20 Days since this phone came out
Click to expand...
Click to collapse
Yes it has
The "unrootable unlockable" Verizon Note 4 has a bootloader unlock and root, twrp, customs roms and kernel
meaning anything is possible
AlexanderDAB said:
Yes it has
The "unrootable unlockable" Verizon Note 4 has a bootloader unlock and root, twrp, customs roms and kernel
meaning anything is possible
Click to expand...
Click to collapse
Kingroot is too bugy it reboots. Any alternatives?
The story is because I installed the twrp recovery and then stupidly locked the bootloader again, now can't access fastboot and recovery. Please help me, it's my savings to buy the device :crying::crying::crying::crying:
chinhcb2k said:
The story is because I installed the twrp recovery and then stupidly locked the bootloader again, now can't access fastboot and recovery. Please help me, it's my savings to buy the device :crying::crying::crying::crying:
Click to expand...
Click to collapse
Go to service centre and ask them to install the software coz there's no tool too fix hard brick of this device.
Kenny 07 said:
Go to service centre and ask them to install the software coz there's no tool too fix hard brick of this device.
Click to expand...
Click to collapse
it's very far from where i live, i tried msm download tool but got a lot of trouble
chinhcb2k said:
it's very far from where i live, i tried msm download tool but got a lot of trouble
Click to expand...
Click to collapse
hey, did you fix your device ?? i got the same problem as yours