The story is because I installed the twrp recovery and then stupidly locked the bootloader again, now can't access fastboot and recovery. Please help me, it's my savings to buy the device :crying::crying::crying::crying:
chinhcb2k said:
The story is because I installed the twrp recovery and then stupidly locked the bootloader again, now can't access fastboot and recovery. Please help me, it's my savings to buy the device :crying::crying::crying::crying:
Click to expand...
Click to collapse
Go to service centre and ask them to install the software coz there's no tool too fix hard brick of this device.
Kenny 07 said:
Go to service centre and ask them to install the software coz there's no tool too fix hard brick of this device.
Click to expand...
Click to collapse
it's very far from where i live, i tried msm download tool but got a lot of trouble
chinhcb2k said:
it's very far from where i live, i tried msm download tool but got a lot of trouble
Click to expand...
Click to collapse
hey, did you fix your device ?? i got the same problem as yours
Related
HI guys, I need help from some caritative soul please!! I'm desperate.
Some of you might have already read about my case: I rushed, last weekend, to flash one of the beta Lollipop versions that hanged around (v19h); I only flashed bootloader and rom.
Now, my phone does not boot to LAF (download mode), nor recovery (TWRP) anymore, because of those not being signature-compatible with new bootloader.
And, since I am obviously not rooted, I am stuck to this version, unable to get out: I can't flash KDZ, or flashable zip on recovery.
Today, I have tried literally EVERYTHING suggested on XDA.. with no luck....
I am basically stuck with a extremely expensive paperweight... any ideas to help me?
RIght now, my only choice is to return it to insurance/warranty, but... what could I possibly say? .. They might laugh at me when they see the Android 5.0 version screen....
Any kind of ideas will be extremely appreciated... Thanks!
Attempts I already tried without luck:
* Flash new/old KDZ or TOT with Flashtool
* Flash new/old KDZ or TOT with Flashtool 2014
* Any ADB attempt
* Any fastboot attempt
* The dreaded RED 2? ...
*[FIX] Unbrick LG G3 stuck in Qualcomm HS-USB QDLoader 9008 mode
rodrigofd said:
HI guys, I need help from some caritative soul please!! I'm desperate.
Some of you might have already read about my case: I rushed, last weekend, to flash one of the beta Lollipop versions that hanged around (v19h); I only flashed bootloader and rom.
Now, my phone does not boot to LAF (download mode), nor recovery (TWRP) anymore, because of those not being signature-compatible with new bootloader.
And, since I am obviously not rooted, I am stuck to this version, unable to get out: I can't flash KDZ, or flashable zip on recovery.
Today, I have tried literally EVERYTHING suggested on XDA.. with no luck....
I am basically stuck with a extremely expensive paperweight... any ideas to help me?
RIght now, my only choice is to return it to insurance/warranty, but... what could I possibly say? .. They might laugh at me when they see the Android 5.0 version screen....
Any kind of ideas will be extremely appreciated... Thanks!
Attempts I already tried without luck:
* Flash new/old KDZ or TOT with Flashtool
* Flash new/old KDZ or TOT with Flashtool 2014
* Any ADB attempt
* Any fastboot attempt
* The dreaded RED 2? ...
*[FIX] Unbrick LG G3 stuck in Qualcomm HS-USB QDLoader 9008 mode
Click to expand...
Click to collapse
The best advice I can give to you is that if no solutions become available to you, depending on the warranty, I would water damage the phone so the warranty does not reject your claim. Otherwise you may have to play the waiting game until developers create a solution.
bonkieash said:
The best advice I can give to you is that if no solutions become available to you, depending on the warranty, I would water damage the phone so the warranty does not reject your claim. Otherwise you may have to play the waiting game until developers create a solution.
Click to expand...
Click to collapse
Are G3 phone OEM warrantied for water damage?
Water-damaging the phone is a risky way to go. I was under the impression that water-damage is not covered, especially since most phones even have a moisture-indicator strip on the motherboard for detecting it. Even if it was covered, what if they do reject warranty due to any reason(including software tampering?). You'll actually end up with an expensive brick then. Atleast now you have a working(albeit buggy) phone.
I'll suggest to wait till the devs can find some way to help you. Was going to suggest you try the Qualcomm HS-USB QDLoader 9008 mode method but it looks like you've already tried that.
Hi, I have the exactly same problem. But after some digging i found this thread : http://forum.xda-developers.com/showthread.php?t=2660566 and http://forum.xda-developers.com/showthread.php?t=2345860
I think that is a long shot, but if somebody provide "debrick image" - (following istructions from the top of the thread) from their D855 devices with lollipop firmware (19h or 20A) it can be worth a try.
Sorry for my english.
bonkieash said:
The best advice I can give to you is that if no solutions become available to you, depending on the warranty, I would water damage the phone so the warranty does not reject your claim. Otherwise you may have to play the waiting game until developers create a solution.
Click to expand...
Click to collapse
LG would not warrantied the phone if its waterproof. They specifically asked you if you crack your screen or has been water damaged. If you do, you either pay a hefty price ($150) or they can refuse to fix it.
jayro28 said:
Click to expand...
Click to collapse
OMG. I'm in the same boat. Do you know where I can get this tool? I would really appreciate!
ifscher said:
OMG. I'm in the same boat. Do you know where I can get this tool? I would really appreciate!
Click to expand...
Click to collapse
Link in PM
jayro28 said:
Link in PM
Click to expand...
Click to collapse
Many thanks! I believe my phone passed the test. It still recognizes my phone as QHSUSB and it doesn't power up, enter recovery nor boot anything.
Do you have any tip to what to do?
jayro28 said:
Link in PM
Click to expand...
Click to collapse
jayro, where i can find the lg smart boot app? can you help me, sorry for my bad english, thank you
jayro28 said:
Link in PM
Click to expand...
Click to collapse
i need that program too please can you giveme a link too thanks in advance.
jayro28 said:
Link in PM
Click to expand...
Click to collapse
hi master plase share with me this tool .
i have g3 qualcomm mode now brick
rodrigofd said:
HI guys, I need help from some caritative soul please!! I'm desperate.
Some of you might have already read about my case: I rushed, last weekend, to flash one of the beta Lollipop versions that hanged around (v19h); I only flashed bootloader and rom.
Now, my phone does not boot to LAF (download mode), nor recovery (TWRP) anymore, because of those not being signature-compatible with new bootloader.
And, since I am obviously not rooted, I am stuck to this version, unable to get out: I can't flash KDZ, or flashable zip on recovery.
Today, I have tried literally EVERYTHING suggested on XDA.. with no luck....
I am basically stuck with a extremely expensive paperweight... any ideas to help me?
RIght now, my only choice is to return it to insurance/warranty, but... what could I possibly say? .. They might laugh at me when they see the Android 5.0 version screen....
Any kind of ideas will be extremely appreciated... Thanks!
Attempts I already tried without luck:
* Flash new/old KDZ or TOT with Flashtool
* Flash new/old KDZ or TOT with Flashtool 2014
* Any ADB attempt
* Any fastboot attempt
* The dreaded RED 2? ...
*[FIX] Unbrick LG G3 stuck in Qualcomm HS-USB QDLoader 9008 mode
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?t=2582142
It might work for your situation
Ok so i was just rooting when my phone decides to die during so commands in adb. :crying:
Now i cant turn on the phone or boot into fastboot or bootloader. everytime i plug it in the charging light just flashes. Also my computer recognises the device as qualcomm hs-usb qdloader 9008 . ive read around the internet and ive found two methods. blank flash and qfil. issue is those tutorials were made for the moto g5 plus. I have searched around the internet and im beginnign to lose hope now. Can someone tell me how to fix this or give me the right blankflash version.
much appreciated
Im sorry that i cant post a useful reply for your problem that you cant even boot into fastboot / hardbricked phone.
The following link is for all those that are stuck in fastboot mode / boot loop.
This post says its for indian version, but i have EU version (1676) and it worked for me to get back my phone as it was when bought:
https://forum.xda-developers.com/g5-plus/how-to/lock-bootloader-moto-g5-plus-indian-t3638835
Kim Il said:
Im sorry that i cant post a useful reply for your problem that you cant even boot into fastboot / hardbricked phone.
The following link is for all those that are stuck in fastboot mode / boot loop.
This post says its for indian version, but i have EU version (1676) and it worked for me to get back my phone as it was when bought:
https://forum.xda-developers.com/g5-plus/how-to/lock-bootloader-moto-g5-plus-indian-t3638835
Click to expand...
Click to collapse
Thanks but unfortunately still cant access bootloader or fastboot to do so :/
rajibahmed said:
Thanks but unfortunately still cant access bootloader or fastboot to do so :/
Click to expand...
Click to collapse
if you cant access bootloader take it to a repair shop - you need specialist software and hardware to re-image your phone
how on earth did you do that - you do know to root this device its just a simple zip flashing in recovery mode - no fancy commands or anything required once you have unlocked the bootloader via the very easy to follow guide on the moto unlock bootloader website
TheFixItMan said:
if you cant access bootloader take it to a repair shop - you need specialist software and hardware to re-image your phone
how on earth did you do that - you do know to root this device its just a simple zip flashing in recovery mode - no fancy commands or anything required once you have unlocked the bootloader via the very easy to follow guide on the moto unlock bootloader website
Click to expand...
Click to collapse
Its a long story. Basically i rooted it successfully but one of my favourite apps (snapchat) wasnt letting me sign in because i was rooted. I tried everything to mkae it work. Eventually i tried to unroot sign in and reroot to make it work. At that moment something went terribly wrong idk what but now im hardbricked.
rajibahmed said:
Its a long story. Basically i rooted it successfully but one of my favourite apps (snapchat) wasnt letting me sign in because i was rooted. I tried everything to mkae it work. Eventually i tried to unroot sign in and reroot to make it work. At that moment something went terribly wrong idk what but now im hardbricked.
Click to expand...
Click to collapse
If you are using LineageOS all you had to do was just go into dev settings switch root to disable & restart the phone
If you used magisk just use the magisk uninstaller then reflash the kernel
I don't understand why you touched the bootloader partition
TheFixItMan said:
If you are using LineageOS all you had to do was just go into dev settings switch root to disable & restart the phone
If you used magisk just use the magisk uninstaller then reflash the kernel
I don't understand why you touched the bootloader partition
Click to expand...
Click to collapse
I dunno y either. Luckily I had insurance on it so now I got a new device
Although even though I'm sorted it think we need a way to fix hardbricked devices because the Moto g5plus and g4s have fixes but I haven't found any that work for Cedric devices
rajibahmed said:
Although even though I'm sorted it think we need a way to fix hardbricked devices because the Moto g5plus and g4s have fixes but I haven't found any that work for Cedric devices
Click to expand...
Click to collapse
How did u fix
infixremix said:
How did u fix
Click to expand...
Click to collapse
I had insurance so I just replaced the whole device
rajibahmed said:
I had insurance so I just replaced the whole device
Click to expand...
Click to collapse
Wtf insurance covers it ?
infixremix said:
Wtf insurance covers it ?
Click to expand...
Click to collapse
Ish. I had Argos insurance and they basically take any dead device. Plus they don't check if it's been tampered with . I just said it didn't turn on
rajibahmed said:
Ish. I had Argos insurance and they basically take any dead device. Plus they don't check if it's been tampered with . I just said it didn't turn on
Click to expand...
Click to collapse
Motorola warranty takes hardbricked dvices with locked bootlloadder?
CypherPotato said:
Motorola warranty takes hardbricked dvices with locked bootlloadder?
Click to expand...
Click to collapse
How the hell did u hradbrick ur device without an unlocked bootloader. And idk I think that after you start tampering with the os and system it kills ur warranty. You'll have to chat with someone at Motorola
My Phone is Redmagic 5g NUBIA_NX659J Model
i got this screen when trying to root it So Please Can any one can help me i just bought it today and i am so sad please help me to fix this and ty guys
Please help
Helllp me plz mod
Noways500 said:
Helllp me plz mod
Click to expand...
Click to collapse
Phone runs Android 10 and has a Snapdragon chip.
What have you done so far to root it? Please fully describe the steps.
jwoegerbauer said:
Phone runs Android 10 and has a Snapdragon chip.
What have you done so far to root it? Please fully describe the steps.
Click to expand...
Click to collapse
I unlock oem and open USB debugging then download twrp 3.4.1B and try to install it by fastboot mode with adb on my computer after in flash twrp I reboot to recovery but I got this error
@Noways500
I think you should repost your issue here:
https://forum.xda-developers.com/nu...how-to-unlock-bootloader-redmagic-5g-t4081743
step 1: download this file https []//drive[/url][dot]google[/url][dot]com/open?id=1W-RWTtRa6HYq6s8F4Q3Zb-Bqa1V-4vTz
step 2 select da file and scatter file
step 3 just plug your hard bricked phone and it will start flashing
no xiaomi id needed just select files included in this zip and your choice of rom thats all .
" just download this software use it's auth_sv5.auth file and MTK_ALLINONE_DA_mt6765_mt6785 file with your scatter file from fastboot rom of your choice and press download then plug in your phone no need to press any button"
sorry for this kind of guide. this is my first post i just unbricked my phone few mins ago i thought everyone else who is facing this issue should know. tell me if this worked for you.
P.S. please remove [/url][dot] and add . thanks
After unbricking my phone i tried it again and found out that i can only use this software once and get popup msg to contact some "Kailash" Guy. I don't know him and please dont get scammed thanks. And I m back to locked redmi note 8 pro with Indian rom.
Account Kilash_bhai_aapko_yaad_karte_hi???????
bcrbfaycel said:
Account Kilash_bhai_aapko_yaad_karte_hi???????
Click to expand...
Click to collapse
Yes
it's a paying account ... I'm in Algeria and we can't afford to pay
s3rv3r111 said:
Yes
Click to expand...
Click to collapse
bcrbfaycel said:
Click to expand...
Click to collapse
Don't pay don't fall for the scam. Is your phone dead? Or you can boot into recovery I might help. Dm me i won't charge any money trust me.
T
thank you....yes m phone is dead :no recovery mode ...no bootloader
s3rv3r111 said:
Don't play don't fall for the scam. Is your phone dead? Or you can boot into recovery I might help. Dm me i won't charge any money trust me.
Click to expand...
Click to collapse
Please;how can i have a mi account authorized ??
s3rv3r111 said:
Don't play don't fall for the scam. Is your phone dead? Or you can boot into recovery I might help. Dm me i won't charge any money trust me.
Click to expand...
Click to collapse
How much to pay this guy for using his tool?
dacia19 said:
How much to pay this guy for using his tool?
Click to expand...
Click to collapse
Don't pay him any money
bcrbfaycel said:
thank you....yes m phone is dead :no recovery mode ...no bootloader
Click to expand...
Click to collapse
Then just download this software use it's auth_sv5.auth file and MTK_ALLINONE_DA_mt6765_mt6785 file with your scatter file and press download then plug in your phone no need to press any button
bcrbfaycel said:
Please;how can i have a mi account authorized ??
Click to expand...
Click to collapse
You can't get edl authorised account yet
s3rv3r111 said:
Don't pay don't fall for the scam. Is your phone dead? Or you can boot into recovery I might help. Dm me i won't charge any money trust me.
Click to expand...
Click to collapse
s3rv3r111 said:
Then just download this software use it's auth_sv5.auth file and MTK_ALLINONE_DA_mt6765_mt6785 file with your scatter file and press download then plug in your phone no need to press any button
Click to expand...
Click to collapse
yes i followed all these steps ... but when i plug usb cable ...opens Account Kilash_bhai_aapko_yaad_karte
Is anyone able to unbrick his/her device using this so flash tool. Or this so flash tool also require authorisation. please reply which person try this software.
So this method doesn't need an auth account to flash any firmware?
1hekill0r said:
Is anyone able to unbrick his/her device using this so flash tool. Or this so flash tool also require authorisation. please reply which person try this software.
Click to expand...
Click to collapse
I successfully unbricked my device with this software that's why I posted.
Worked great using SP Flash Tool v5.2016.00 and begonia_global_images_V11.0.2.0.PGGMIXM_20191201.0000.00_9.0_global_d12d50b900
Thank you very much
I am surprised this is not bigger news
Melon_Bread said:
Worked great using SP Flash Tool v5.2016.00 and begonia_global_images_V11.0.2.0.PGGMIXM_20191201.0000.00_9.0_global_d12d50b900
Thank you very much
I am surprised this is not bigger news
Click to expand...
Click to collapse
good news for other users
MiFlash 2019.12.6.0 works perfectly fine for me.
s3rv3r111 said:
step 1: download this file https []//drive[/url][dot]google[/url][dot]com/open?id=1W-RWTtRa6HYq6s8F4Q3Zb-Bqa1V-4vTz
step 2 select da file and scatter file
step 3 just plug your hard bricked phone and it will start flashing
no xiaomi id needed just select files included in this zip and your choice of rom thats all .
" just download this software use it's auth_sv5.auth file and MTK_ALLINONE_DA_mt6765_mt6785 file with your scatter file from fastboot rom of your choice and press download then plug in your phone no need to press any button"
sorry for this kind of guide. this is my first post i just unbricked my phone few mins ago i thought everyone else who is facing this issue should know. tell me if this worked for you.
P.S. please remove [/url][dot] and add . thanks
After unbricking my phone i tried it again and found out that i can only use this software once and get popup msg to contact some "Kailash" Guy. I don't know him and please dont get scammed thanks. And I m back to locked redmi note 8 pro with Indian rom.
Click to expand...
Click to collapse
My phone is locked and it says "This MIUI version can't be installed on your device". Help me plz if you can
failed
s3rv3r111 said:
I successfully unbricked my device with this software that's why I posted.
Click to expand...
Click to collapse
I failed, still a fail 0xC0060005
not working on my phone !?
I need authorized account to flash rom in edl mode pleas help me my phone dead and xiome store refused to fix it any on help me pleas i tried to get fis boot after unplug battry but did't get only edl mode i don't have any cash to fix it only have my frind laptop only buc get downgred if any one can help i will pray for him
How did you brick? Tell us more details...
alexmanu1 said:
How did you brick? Tell us more details...
Click to expand...
Click to collapse
Go back by wrong in android 9 from android 10 with twrp i was in miui 12 beta and wint to go back in 11 globel get by wrong android 9 rom
alexmanu1 said:
How did you brick? Tell us more details...
Click to expand...
Click to collapse
Help me pleas i don't have any mony to pay even 10$ to any one
Go to another service centre and say that it happened after a OTA update. You may have a chance if someone which has an authorized account will help you for free. But this is a low chance...
alexmanu1 said:
Go to another service centre and say that it happened after a OTA update. You may have a chance if someone which has an authorized account will help you for free. But this is a low chance...
Click to expand...
Click to collapse
Im in egypt he did't khow how do it in all
If go to all egypt i will get no chans to any one khow about i tell him
alexmanu1 said:
Go to another service centre and say that it happened after a OTA update. You may have a chance if someone which has an authorized account will help you for free. But this is a low chance...
Click to expand...
Click to collapse
And my phone opned
Any one trusted to pay him for authrzied account i can pay only 15$ all i got pleas i don't have spaer phone and i looking for work
Medolokk said:
I need authorized account to flash rom in edl mode pleas help me my phone dead and xiome store refused to fix it any on help me pleas i tried to get fis boot after unplug battry but did't get only edl mode i don't have any cash to fix it only have my frind laptop only buc get downgred if any one can help i will pray for him
Click to expand...
Click to collapse
Have look at this thread New Redmi Note 8 Pro Unbrick/Hardbrick Removal method- No authorized Service Account I managed to fixed my phone this way. Here is my story there.
Please note I had unlocked bootloader and applied Anti-brick solution PRIOR problem happened, might be why.
Also note you need image for your device regional favor.
Hope this helps.
Good luck!
Muad.Dib said:
Have look at this thread New Redmi Note 8 Pro Unbrick/Hardbrick Removal method- No authorized Service Account I managed to fixed my phone this way. Here is my story there.
Please note I had unlocked bootloader and applied Anti-brick solution PRIOR problem happened, might be why.
Also note you need image for your device regional favor.
Hope this helps.
Good luck!
Click to expand...
Click to collapse
I tried it but only need the authrzied account i don't have any way to work it
Medolokk said:
I tried it but only need the authrzied account i don't have any way to work it
Click to expand...
Click to collapse
Strange, when I tried this method to flash my phone back to stock, I only had to login with my regular Mi Account when asked, also had logged in the MiFlash Pro app, had opened MiFlash tab from there too, and I could flash using SP Flash Tools provided in the link. I had to try a few times to make it worked staying logged in the mi account (kept the pop up windows on top of the screen). I had phone connected before it rebooted and flashing started straight away. Make sure you follow the guidelines as being given.
Anyway not more I can do to help if that does not work for you good luck!
Muad.Dib said:
Strange, when I tried this method to flash my phone back to stock, I only had to login with my regular Mi Account when asked, also had logged in the MiFlash Pro app, had opened MiFlash tab from there too, and I could flash using SP Flash Tools provided in the link. I had to try a few times to make it worked staying logged in the mi account (kept the pop up windows on top of the screen). I had phone connected before it rebooted and flashing started straight away. Make sure you follow the guidelines as being given.
Anyway not more I can do to help if that does not work for you good luck!
Click to expand...
Click to collapse
Thx fore help if you knhow one can give me account with 10 $ or 15$ it will be greet help