Related
hi I'm a first time user trying to root my phone. I have my phone in usb debbuging, also install drivers to computer. using one click from xda. I either get phone is not connected or ragethecage file is missing. also can i pay to get a file that i can root my phone. Plz help
Thanks in advance C-Flo
cflo00 said:
hi I'm a first time user trying to root my phone. I have my phone in usb debbuging, also install drivers to computer. using one click from xda. I either get phone is not connected or ragethecage file is missing. also can i pay to get a file that i can root my phone. Plz help
Thanks in advance C-Flo
Click to expand...
Click to collapse
What version of android do you have (settings -> about phone)?
if you want to get to a point to run custom roms you can do the follow:
go to use this thread
http://forum.xda-developers.com/showthread.php?t=853209
Download : Stock EB13 Deodexed EXT4 + CW 3.0.0.6
and follow the instructions under that link.
One change to the instructions: uncheck f.reset time
You can then flash an EC05 ROM of your choice
After you do that go here for a flashable zip to upgrade your modem to EC05
http://forum.xda-developers.com/showthread.php?t=1012384
Hi Everyone,
Can anyone help me out in rooting my Xperia Arc Lt15i?
I'm trying to use the SuperOneClick to root my device but I don't know how, it so much complicated. Even through I followed the steps in online but I stuck in the middle of the steps. Does anyone could kindly please post up any good instruction for me to go on for the root process?
*I have downgrade it to 0.42
I'm a new android user.
okies i'm going to assume you want to have the latest version of android OS on your arc
1. Download a ready to root ftf for your Lt15i. Here is one
2. Use flashtool to flash the ftf onto your phone. There are a lot of tutorials on youtube, but here's one I thought was great.
3. Download this and unzip it. Put your phone in debugging mode and plug the phone to the PC. Run the 'RunMe.bat' file and the file should root your phone automatically.
4. When the program says 'done', close it.
5. afterwards, download this kernel and flash it to your phone and you're done!
jman2131 said:
okies i'm going to assume you want to have the latest version of android OS on your arc
1. Download a ready to root ftf for your Lt15i. Here is one
2. Use flashtool to flash the ftf onto your phone. There are a lot of tutorials on youtube, but here's one I thought was great.
3. Download this and unzip it. Put your phone in debugging mode and plug the phone to the PC. Run the 'RunMe.bat' file and the file should root your phone automatically.
4. When the program says 'done', close it.
5. afterwards, download this kernel and flash it to your phone and you're done!
Click to expand...
Click to collapse
Thanks for providing the instruction for me. Anyway I've flashed my phone with the reference here http://forum.xda-developers.com/showthread.php?t=1560777 with the link provided by jlmcr87 for the firmware and flashtool. So it became from version 0.62 into 0.42. But the tutorials on youtube was something 0.283? Looks weird. Can you tell me whats the difference?
The only difference is the version of firmware you are flashing. You can always update it through pc companion once you've flashed the firmware
Sent from my LT18i using xda premium
jman2131 said:
okies i'm going to assume you want to have the latest version of android OS on your arc
1. Download a ready to root ftf for your Lt15i. Here is one
2. Use flashtool to flash the ftf onto your phone. There are a lot of tutorials on youtube, but here's one I thought was great.
3. Download this and unzip it. Put your phone in debugging mode and plug the phone to the PC. Run the 'RunMe.bat' file and the file should root your phone automatically.
4. When the program says 'done', close it.
5. afterwards, download this kernel and flash it to your phone and you're done!
Click to expand...
Click to collapse
but it's for bootloader Locked or Unlocked?????
Raschild6 said:
but it's for bootloader Locked or Unlocked?????
Click to expand...
Click to collapse
i did those steps and my phone is locked
It stuck at *daemon started successfully*
What it mean by please plug your device in ADB mode?
*Anyway I did not flash the file you gave me. I flashed followed by the link I mentioned above.
imDarius said:
It stuck at *daemon started successfully*
What it mean by please plug your device in ADB mode?
*Anyway I did not flash the file you gave me. I flashed followed by the link I mentioned above.
Click to expand...
Click to collapse
Adb means phone switched on and In settings the option selected use debug mode when connected by usb.
Sent from my LT18i using xda premium
zolaisugly said:
Adb means phone switched on and In settings the option selected use debug mode when connected by usb.
Sent from my LT18i using xda premium
Click to expand...
Click to collapse
Thanks.
For the first time the it stuck at *daemon started successfully* so later on I unplug and replug the USB in Debug Mode and it still remain *please plug your device in ADB mode*
Any idea?
http://forum.xda-developers.com/showthread.php?t=1304634
Turn off and on your phone. That usually works for me
Sent from my LT18i using xda premium
i want to install a custom rom-open ocean on my optimus me! but i have no idea how to do it.can anyone help me??
First of Root Your LG Optimus ME P350 With P350 Toolkit
Now Install Recovery on Your P350
Now you Would able to go on for custom rom
RTFM at the wiki!
Want more information?
Sent from my LG-P350 using xda app-developers app
Wrong Section Reported to Moderator !
Yes this should be in the Q&A Section anyways
Link to the Tool kit by antdking-------->http://forum.xda-developers.com/showthread.php?p=29821478
Download it
Root your Phone
Install a Recovery to start with you can install Amon Ra recovery by drapayulk
Download any ROM from this forum (Psst.....We have lots of Roms lying around)
Follow the instructions provided by the user who created the rom to install
That's it you will have custom rom in your phone.
cant root my phone
keyur2maru said:
First of Root Your LG Optimus ME P350 With P350 Toolkit
Now Install Recovery on Your P350
Now you Would able to go on for custom rom
Click to expand...
Click to collapse
i tried to root my phone with all the methods but it fails to root! i tried all versions of gingerbreak,z4root,superoneclick,universalroot,unlockroot,easyroot,and all btw every time it fails!please help me! thank you!
use this andtking toolkit http://forum.xda-developers.com/showthread.php?p=29821478
follow the instruction carefully.
and 100% you can root your phone.. and you put recovery also..
n1ck018 said:
use this andtking toolkit http://forum.xda-developers.com/showthread.php?p=29821478
follow the instruction carefully.
and 100% you can root your phone.. and you put recovery also..
Click to expand...
Click to collapse
i downloaded the andtking toolkit.but when i open the file you said,a black window named system opens.in that window i see loading..loading..loading...ii waited for a while..but nothing happened..now what to do??can you guide me please?
The Chain Hacker said:
Yes this should be in the Q&A Section anyways
Link to the Tool kit by antdking-------->http://forum.xda-developers.com/showthread.php?p=29821478
Download it
Root your Phone
Install a Recovery to start with you can install Amon Ra recovery by drapayulk
Download any ROM from this forum (Psst.....We have lots of Roms lying around)
Follow the instructions provided by the user who created the rom to install
That's it you will have custom rom in your phone.
Click to expand...
Click to collapse
i downloaded the andtking toolkit.but when i open the file you said,a black window named system opens.in that window i see loading..loading..loading...ii waited for a while..but nothing happened..now what to do??can you guide me please?
Yah. nothing happens coz you have to do something,.
the toolkit is not automatic.
maybe you have to read what is inside the toolkit ..
or else try to pm me. i will do that for you using TeamViewer
just make sure you already connect your phone into the computer.
and you already enable the usb Debugging.
n1ck018 said:
Yah. nothing happens coz you have to do something,.
the toolkit is not automatic.
maybe you have to read what is inside the toolkit ..
or else try to pm me. i will do that for you using TeamViewer
just make sure you already connect your phone into the computer.
and you already enable the usb Debugging.
Click to expand...
Click to collapse
thank you very much for replying me! there is nothing to read in that toolkit.there are two files-one is toolkit and other is dependancies.and i know that my phone was connected and usb debugging was on.can you give me your email id or something please?
I have PMed you the procedure follow it
++++++++++++++++++++++++
DOWNLOADING LINK IS UPDATED
++++++++++++++++++++++++
Hi,
while i am looking, i found the below link for how to root S3 Neo I9301I 4.4.2
CF-Auto-Root
i don't know if it is legal to post a link from another dev. site !!!
anyway it works for me
my device is:
I9301I with one micro sim
android 4.4.2
baseband: I9301IXXUANF2
Build: I9301IXXUANH2
------------------------------------------------
Thanks? Maybe?!!
+[UPDATE]++++++++++++++++++++Coped from the original site++++++++++++++++++++++++++
++And Just in case the upper link was removed or the site is not available anymore for any reason ++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
These are the instructions to root Samsung Galaxy S3 Neo GT-I9301I (running on android 4.4.2) using Odin on Windows Computer.
Requirements:
1)Your Samsung Galaxy S3 Neo GT-I9301I should have atleast 30-40 percent of battery to perform the rooting process.
2)Root Samsung Galaxy S3 Neo GT-I9301I using Odin.
Step 1:
DOWNLOAD USB Driver on your computer.
If Samsung USB Driver is already installed on your computer then Skip this Step.
Step 2:
LINK and extract the root files on your computer.
Step 3:
Now, Switch off your Smartphone.
Step 4:
After switching off the phone, you need to boot into Download Mode.
To boot into download mode Press and hold Zoom Left and Power button at same time for 5-8 seconds until download mode is active.
Step 5:
In the Download mode you will be able to see a Warning Yellow Triangle Sign.
In this situation you have to press the Zoom Right key to continue.
Step 6:
Now, Open Odin3 (found in the extracted files, that you have downloaded in the Step 2) on your computer.
Then connect your Smartphone to the computer.
Step 7:
Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show “Added” message at
the lower-left panel.
Step 8:
Once your device is detected by Odin, click on the PDA button and select the CF-Auto-Root.tar file (you have downloaded this file in step 2).
Step 9:
Now, click on the Start button in Odin to begin the Flashing.
Step 10:
Flashing usually takes 30-50 seconds to complete the rooting process on your Samsung Galaxy S3 Neo GT-I9301I.
Once Rooting process is completed you will be able to see a Green Box with Pass written on it in Odin.
During this process Smartphone will re-boot automatically.
Step 11:
Once you see, the Pass message in Odin, you can disconnect your Device from the computer.
Step 12:
Now, to make sure you have successfully rooted your Samsung Galaxy S3 Neo GT-I9301I, open Applications Menu on your Smartphone and
Find SuperSU App.
If this app exist on your Smartphone then it means you have successfully rooted your device. [:good:].
Optional:
You can also verify that your device is successfully rooted or not by Root Checker Application.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Are YOU LOOKING FOR ---->
How to be able to write files to the MicroSD card on S3 Neo I9301I..?!!
Click the above link to figure out how
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I used this and I rooted successfully but I have no idea whether it has viruses or not, for all I know my phone may be infected
Work like a charm for me
needo2 said:
I used this and I rooted successfully but I have no idea whether it has viruses or not, for all I know my phone may be infected
Click to expand...
Click to collapse
Don't worry
Its not a viruse
You can try to do a scan viruse through your pc using your usb cable
Sent from my GT-I9301I using XDA Free mobile app
Goofy9020 said:
Work like a charm for me
Click to expand...
Click to collapse
Happy to help
Sent from my GT-I9301I using XDA Free mobile app
Can i use this to root I9300i (dualsim) with 4.3 stock rom?
arashhn said:
Can i use this to root I9300i (dualsim) with 4.3 stock rom?
Click to expand...
Click to collapse
Not sure ... don't risk
Sent from my GT-I9301I using XDA Free mobile app
What about knox flag? This root method trigger the warranty flag?
Official site chainfire said: this metod will trip KNOX.
Probably the best method will be change kernel on older than you have now via odin. And use towelroot app, for me this method worked fine, without tripping KNOX. I have Old kernel, but now i cant upload this file for you because I have it on ma laptop at home.
Wysłane z mojego GT-I9301I za pomocą Tapatalk 2
jogurtowocowy said:
Official site chainfire said: this metod will trip KNOX.
Probably the best method will be change kernel on older than you have now via odin. And use towelroot app, for me this method worked fine, without tripping KNOX. I have Old kernel, but now i cant upload this file for you because I have it on ma laptop at home.
Wysłane z mojego GT-I9301I za pomocą Tapatalk 2
Click to expand...
Click to collapse
Thanks, On What ROM is based the old kernel that you have, maybe I can extrack it from a ROM in Sammobile. I have an old kernel but is for android 4.3 not 4.4. I have the S3 Neo with dual SIM and 1.4GHz Snapdragon 400 quadcore.
I dont know, because I downloaded only old kernel, without stock rom. I have single SIM s3 Neo 4x1.4 eu version.
I think, last rom with old kernel is from 05/06 2014 or older ver.
Wysłane z mojego GT-I9301I za pomocą Tapatalk 2
Thanks! Everything works great with this method!
Is there a way to root and install some recovery on SIII Neo i9301i 4.4.2 from Ubuntu Linux? All I could find is the way to do it from Windows.
Milos_SD said:
Is there a way to root and install some recovery on SIII Neo i9301i 4.4.2 from Ubuntu Linux? All I could find is the way to do it from Windows.
Click to expand...
Click to collapse
Hi
In theoriy it is possible to extract the contents of that tar file and flash it with adb or maybe heimdall.
There is a recovery img and some cache image. I guess you need to write the recovery img to the recovery partition. But i dont know the commands (would be also interested in them!!) and the chache image belongs also somewhere.
If someone could point out the locations and the commands this would be awesome!
Thanks
Manuel
Manux2015 said:
Hi
In theoriy it is possible to extract the contents of that tar file and flash it with adb or maybe heimdall.
There is a recovery img and some cache image. I guess you need to write the recovery img to the recovery partition. But i dont know the commands (would be also interested in them!!) and the chache image belongs also somewhere.
If someone could point out the locations and the commands this would be awesome!
Thanks
Manuel
Click to expand...
Click to collapse
Hi I just want to say that i succesfully rooted my neo in Linux with a WinXP install in Virtualbox! Just boot into download mode and then add the device in Virtualbox. I tied it 2 times, second time worked. First time he did not get a connection to the phone.
Also i installed the udev rules from heimdall before doing this!
Happy rooting
I found a web java app called JOdin3 that needs heimdall on Linux to be able to operate. It detects a phone as connected when in download mode, but I didn't have the guts to try and flash it. Did anyone else tried that application on any OS?
Hi there, I have a gt-I9301I with a baseband: I9301IXXUANI2 can I try this method? Is there any risk of getting a brick?
thanks
my s3 neo refuses rooting
I have a S3 Neo I9301IXXUAOD2, i tried to make the root of the phone with Odine but on the restart of the phone a backup start and the phone isn't rooted.... someone can help me please?
P.S. Sorry for my bad english
Thanks
I am not responsible for any brick.
I tested this guide myself and decided to share it.
Make a backup before this guide because you will lose your data!
The unlock method has been updated and now you can unlock the bootloader more easily without the risk of bricking after an OTA and without changing the bootloader.
Now you can safely unlock the bootloader using mtkclient.
Link: https://github.com/bkerler/mtkclient
TWRP can be installed via mtkclient or manually from rooted Android.
TWRP Download link: https://github.com/XRedCubeX/twrp_meizu_m5c/releases
IF you unlocked the bootloader with the old method you can follow these steps:
1) Download the attached package.
2) Download OTA zip from flyme, link: http://www.flymeos.com/firmwarelist?modelId=70&type=1
3) Download the latest version of SP Flash Tool.
4) Download MTKClient and follow the instructions to install it.
5) Power off the phone and keep unplugged it from PC.
6) Open SP Flash Tool, select the downloaded package and select all partitions, then press the download button, don't plug phone for now.
7) Boot to recovery with vol +, plug the phone on PC, depending on recovery, TWRP or stock, use adb sideload or put update.zip in internal memory and install the zip.
8) Let the phone reboot or reboot it manually.
9) Now start the flash from SP Flash tool automatically, let it finish.
10) After the flash, unplug the phone and reboot into recovery.
11) Paste the update.zip in the phone and flash it.
12) After reboot, let your phone reboot into android and power off.
13) You can follow the guide to unlock bootloader with mtkclient.
FAQ:
A) But will I lose the data with this guide?
Yes.
Make sure to back up your data in any case!
B) But this guide is a bit different than usual, where is "fastboot oem unlock"? Or "fastboot flashing unlock"?
Meizu has not implemented an unlock command and in this case to unlock the bootloader we have to use a tool that makes us change the unlock status.
C) Are there Custom ROMs?
There is only one custom ROM for this device, the Lineage OS 14 but I advise against using it because it has a bit of a bug but I haven't had more time to work on it yet.
D) But wasn't the guide different?
It has been updated with a better method with more advantages.
E) My device is in Hard Brick! How can I solve?
There are various types of Hard Brick and it depends from situation to situation.
F) I have installed Lineage OS 14 but I am not satisfied, I want to go back to Flyme!
Flash update.zip from official website.
G) Can I relock the bootloader?
From MTKClient readme:
for relocking use:
python mtk da seccfg lock
Click to expand...
Click to collapse
H) TWRP? I am interested in Device Tree, where is the link?
Here: https://github.com/XRedCubeX/twrp_meizu_m5c
I) I have a Meizu A5 (Chinese M5c) will it work on it?
I can't assure you anything but it could work, the only way to be sure is to test on a Meizu A5.
J) Can I flash twrp from fastboot?
Fastboot refuses to flash partitions, strangely, I don't know if downgrade or anything changes the situation but for now I was able to flash it with mtkclient.
I can remove the FlameOs from the Meizu M5c and install a custom rom. So far I haven't found any rom for this device?
Mortaux said:
I can remove the FlameOs from the Meizu M5c and install a custom rom. So far I haven't found any rom for this device?
Click to expand...
Click to collapse
Im working on a Lineage OS 14 for this device.
I tried the procedure and it failed. Apparently it just formatted it but couldn't finish the process, returned an error. Then I tried to reinstall the stock ROM and it generated the error S_BROM_DOWNLOAD_DA_FAIL (0x7D4) & 2004). Now my phone is off and I can't turn it on anymore.
I tried this method but it didn't work:
HOW TO FIX FLASH TOOLS ERROR S_BROM_DOWNLOAD_DA_FAIL (0x7D4) & 2004) FOR MTK PHONES
HOW TO FIX FLASH TOOLS ERROR S_BROM_DOWNLOAD_DA_FAIL (0x7D4) & 2004) FOR MTK PHONES FIX FOR SP FLASH TOOLS ERROR S_BROM_DOWNLOAD_DA_FAIL (0x7D4) AND (2004) Follow the following steps: 1. Get SP flash tools (Latest version) 2. Download your...
forum.xda-developers.com
I know it's my responsibility, but I don't know what else to do. Could someone please help me?
thiagosousa777 said:
I tried the procedure and it failed. Apparently it just formatted it but couldn't finish the process, returned an error. Then I tried to reinstall the stock ROM and it generated the error S_BROM_DOWNLOAD_DA_FAIL (0x7D4) & 2004). Now my phone is off and I can't turn it on anymore.
I tried this method but it didn't work:
HOW TO FIX FLASH TOOLS ERROR S_BROM_DOWNLOAD_DA_FAIL (0x7D4) & 2004) FOR MTK PHONES
HOW TO FIX FLASH TOOLS ERROR S_BROM_DOWNLOAD_DA_FAIL (0x7D4) & 2004) FOR MTK PHONES FIX FOR SP FLASH TOOLS ERROR S_BROM_DOWNLOAD_DA_FAIL (0x7D4) AND (2004) Follow the following steps: 1. Get SP flash tools (Latest version) 2. Download your...
forum.xda-developers.com
I know it's my responsibility, but I don't know what else to do. Could someone please help me?
Click to expand...
Click to collapse
You unplugged the device while it was formatting, consequently it no longer has the bootloader, that error means that the device needs an authorization file that unfortunately only meizu has, shortly if I can try to release a tool to unbrick it in cases similar to these
XRed_CubeX said:
You unplugged the device while it was formatting, consequently it no longer has the bootloader, that error means that the device needs an authorization file that unfortunately only meizu has, shortly if I can try to release a tool to unbrick it in cases similar to these
Click to expand...
Click to collapse
It's a shame .. I hope you can really release this tool, so I can revive my phone. Thank you.
You can make a video on youtube showing the procedure on the Meizu M5c. Installing Twrp and LineageOs 14? Just to make sure it works
Mortaux said:
You can make a video on youtube showing the procedure on the Meizu M5c. Installing Twrp and LineageOs 14? Just to make sure it works
Click to expand...
Click to collapse
For now I can't make the video because I can't release the Lineage because I'm fixing some bugs and I want to do some checks before releasing it publicly
thiagosousa777 said:
It's a shame .. I hope you can really release this tool, so I can revive my phone. Thank you.
Click to expand...
Click to collapse
Ok i found a working guide, tried on my M5c and it works:
Search on YouTube: flash mtk without da ,
You will find a video called, just exactly as I write here: "How to flash MTK secure boot devices without a custom DA" and follow the video tutorial for unbrick your device.
P.S:Obviously when the guide ends you flash the ROM from SP flash tool as you normally would
XRed_CubeX said:
Ok i found a working guide, tried on my M5c and it works:
Search on YouTube: flash mtk without da ,
You will find a video called, just exactly as I write here: "How to flash MTK secure boot devices without a custom DA" and follow the video tutorial for unbrick your device.
P.S:Obviously when the guide ends you flash the ROM from SP flash tool as you normally would
Click to expand...
Click to collapse
I'll try that, thanks a lot!
thiagosousa777 said:
I'll try that, thanks a lot!
Click to expand...
Click to collapse
Did you finally manage to fix the device?
Were you able to get on with the guide?
XRed_CubeX said:
Did you finally manage to fix the device?
Were you able to get on with the guide?
Click to expand...
Click to collapse
I haven't had time to do it yet. When I have time I will follow the tutorial and tell you if it worked.
thiagosousa777 said:
I haven't had time to do it yet. When I have time I will follow the tutorial and tell you if it worked.
Click to expand...
Click to collapse
Ok good luck
XRed_CubeX said:
Ok good luck
Click to expand...
Click to collapse
XRed_CubeX, I followed the tutorial from start to finish. I used the SP Flash Tool to install the M5c stock ROM, the ROM was flashed 100%, but after disconnecting the USB cable the phone did not turn on.
thiagosousa777 said:
XRed_CubeX, I followed the tutorial from start to finish. I used the SP Flash Tool to install the M5c stock ROM, the ROM was flashed 100%, but after disconnecting the USB cable the phone did not turn on.
Click to expand...
Click to collapse
Have you flashed the Stock ROM or the Engineering ROM? I remind you that even if you have flashed the eng rom only once previously, you can no longer return to the flyme bootloader so use the normal stock ROM but you will have to flash the Engineering rom
XRed_CubeX said:
Have you flashed the Stock ROM or the Engineering ROM? I remind you that even if you have flashed the eng rom only once previously, you can no longer return to the flyme bootloader so use the normal stock ROM but you will have to flash the Engineering rom
Click to expand...
Click to collapse
Well, I flashed the stock ROM a second time, using the Firmware Upgrade option, and it worked. My phone turned on and I'm in the initial setup screen.
By the way, this Engineering ROM is the ROM you shared above? Do you think it is stable enough to be used? Maybe another day I'll install it, with care to not do anything wrong again
thiagosousa777 said:
Well, I flashed the stock ROM a second time, using the Firmware Upgrade option, and it worked. My phone turned on and I'm in the initial setup screen.
By the way, this Engineering ROM is the ROM you shared above? Do you think it is stable enough to be used? Maybe another day I'll install it, with care to not do anything wrong again
Click to expand...
Click to collapse
Yes, the ROM in this thread is ROM engineering, about the stability I can't tell you why I haven't tested it, the main purpose FOR ME was to get the bootloader unlock with this ROM, if you want to switch to ROM engineering you CAN install the flyme after installed the Engineering ROM but you must always modify the OTA zip so that some partitions do not flash but if you are interested I will talk about it in more detail and maybe I will give you a hand to flash flyme safely on bootloader engineering
XRed_CubeX said:
Yes, the ROM in this thread is ROM engineering, about the stability I can't tell you why I haven't tested it, the main purpose FOR ME was to get the bootloader unlock with this ROM, if you want to switch to ROM engineering you CAN install the flyme after installed the Engineering ROM but you must always modify the OTA zip so that some partitions do not flash but if you are interested I will talk about it in more detail and maybe I will give you a hand to flash flyme safely on bootloader engineering
Click to expand...
Click to collapse
Actually, the ROM I installed with SP Flash Tools was not the update.zip from the official Flyme OS website. I downloaded the stock rom from needrom.
I have done this several times before.
But now, strangely I can no longer update to the latest version. The version I'm running is Flyme 6.0.2.0G. I tried to download the update.zip file and install it manually by clicking on it, and it appeared "corrupted file". I also tried to use the Update application and "network error" appeared. But everything else is working perfectly.
XRed_CubeX said:
if you are interested I will talk about it in more detail and maybe I will give you a hand to flash flyme safely on bootloader engineering
Click to expand...
Click to collapse
I would like to know how to install the latest version of Flyme OS via TWRP. If you can tell how to do this..
XRed_CubeX said:
can't release the Lineage because I'm fixing some bugs and I want to do some checks before releasing it publicly
Click to expand...
Click to collapse
Are you working on a custom Lineage OS ROM for this device? I'm interested, when you can publish it.. Do you have a prediction of when you will be able to release that ROM?
thiagosousa777 said:
I would like to know how to install the latest version of Flyme OS via TWRP. If you can tell how to do this..
Are you working on a custom Lineage OS ROM for this device? I'm interested, when you can publish it.. Do you have a prediction of when you will be able to release that ROM?
Click to expand...
Click to collapse
Ok, I'll explain in detail how it works: In the guide you will have read that you cannot return to the flyme using the stock rom or an unmodified OTA. This is a tip because once you flash the Engineering ROM, the engineering bootloader (which is essential for unlocking) will also be flashed, but the problem is that if you flash the stock bootloader (the flyme one, the one you surely have when you get the phone), the device for a reason unknown to me, probably the Engineering ROM modifies something in the device (?) and then goes into brick if you try to return to the flyme bootloader. To flash an OTA flyme on TWRP, you must first have some precautions: you must take the OTA on your computer (or a file explorer capable of editing zip files) and remove the following files: lk.bin preloader.bin (it will have a name longer but you still have to remove that) and tz.bin / trustzone.bin. Done like this, now the OTA becomes safe to install, you install it from TWRP, at the end of the flash it will give you an error but it is because it does not find the files we have removed but we can safely ignore it because it will have successfully installed the flyme on the device.
Regarding lineage: I'm still working on it a bit and gradually I'm discovering bugs. I already warn you that the camera will not work in the Lineage, I have tried in every way to try to make it work but it does not want to go, I have asked for help everywhere but no one has been able to answer so I do not know what to do, for the rest I want to keep a little longer the ROM under test to fix the remaining bugs