Help me!
I'm have XDA, with wrong flashed bootloader. In this time no bootloader picture, no other in display. When use the hard reset button, only two led's up. When i'm put the charger, phone chargigng it.
Please help me how to repair this XDA?
I'm build nullmodem cable for clean communication.
Thanks,
B.R. Thira
http://wiki.xda-developers.com/wiki/XDAtools
well this page have a picture which mention broken bootloader
maybe you should look into that
I'm read this, but i'm don't look, what cable use for upload bootloader. The software called pnewbootloader.exe don't have any option, or other switch. (com port USB port, speed) With usb cable and with Serial Link cable have no communication.
Related
My Pda 2k device i tryed to upgrade it from 2003 SE to 2k5 after pressing update the device restarted gived me a gray screen and typed on it seril and at the buttom v2.02 now i cant open the device each time i reset or heard rest this is the only screen appears to me i cant even connect to activsync please i need your help what to do to get my device back, this error message i recived (usb device not recognized aslo active sync didnt recognize it)
i need to add a point the device is not working on the USP connection as it have a problem only serial port to connect with the pc
i'm so new here please help me
not to worry.. you can perform a hard reset of your 2k3 version "power+reset" to get you back to at least a working device.. I have been through this and have had this happen to me as well.. try entering bootloader again "power+record+reset" and dock it fairly quickly and it should change to USB on the screen and PC recognize it... also for anyone reading this.. I would highly recommend plugging your cradle into a 5v power supply as I can only imagine most of the bricked BAs are probably due to a computer freezing and/or the PC shutting down power to the USB port only for a fraction of a second and hosing the flash up.
THx Man i will try i hop this will work :lol:
hello friends I open this topic for people who can help me know how or had the same problem
I upgrade some systems and languages in htc but this went to sleep hehe
I was wrong in the script file of the Touch Spl Pro2, wrote the spl of the mega Touch2 and obviously my touch pro 2 Dead
Now does not enter boot mode, no driver recognizes Qualcom only connects to the USB and turn the orange LED
attempt to direct cable com mtty but not very well as
I hope you can help me is the first time it happens
thanks
b,r
A hard reset may be the only sollution....
Hard reset isn't going to help if the phone won't boot !
So you wrote the SPL of a different phone to your TP2 ? That doesn't sound good
JTAG only
Jackos said:
JTAG only
Click to expand...
Click to collapse
JTAG=Joint Test Action Group ????
jepp, but no one has figured out the pins yet
If someone does it, can it be used to connect the "dead phone" to PC to get it flashed???
Muahaha, yes. But trust me, that's NOT so easy as you think. This requires EXTREME skill.
Thanks, are you working on it then..?
Are you kidding me?! Too hard for me, despite the fact I'm studying Electronics X_x
You can do it as a case study, in your class...
yes my htc tp2 is dead only on led orange when connect usb
not enter in mode boot
no recongize drivers qualcom
I know that just is repair via jtag but I think and believe exist other solution
i will make cable serial for connect the htc via com direct for
format the internal memory and after reflash the spl and wm
someone has image
JTAG pins TP2???
hello folks,
after months of searching i finally downloaded my stock rom, but unfortunately it was a PJ46IMG.zip file, not an RUU, so i kept searching for a solution to flash it, but all of them were by using a USB Y cable or an OTG cable, so is there any solution to flash it without a cable?
and please guys am so tired from lots of searching, i spent days with no sleep to understand your terms like, please guys give it a brief description if there were any solution for this.
Download your RUU http://www.htcruu.com/
Sent from my HTC One X using xda premium
Otg or y cable is needed if you cannot connect your phone via USB cable. If you can, first upgrade to latest cwm 5.8.4.0 first, if not already done so. Then boot to recovery, under mounts and storage, mount your usbcard. You should now see your card from the pc. Copy your PJ146IMG.zip file to the root of the sdcard. Reboot your bootloader. It should see the file and install.
If you can find your ruu, you can also use that. But, you will need to go back to stock recovery to use it.
Sent from my HTC One X using xda premium
thanks mates for your support, but sure i've done this lets say 67 times till the moment, my USB storage is mounted via CMW 5.8.4.0 and the PJ46IMG.zip is there on the root of the USB storage, rebooting to bootloader but it doesn't see a thing, it doesn't even check when the cable is unplugged, and when the cable is plugged between the PC and my HOX it checks but without seeing the PJ46IMG.zip rom
this is the only rom i found that has my correct CID: 621, Image Version: 1.29.709.12, HBOOT 0.95 in about 4 months of searching.
also thanks iamaniff but there is no server has my rom, it seems they created this rom for my device only , and finding its PJ46IMG.zip is a treasure for me
thanks guys, but it seems it ends here, i might order the USB Y cable from amazon and wait several months to be delivered here in Egypt, see u guys in a year when there is any possibility bring my HOX back to stock
Y cable
Hossam.Abdelsalam said:
thanks mates for your support...
Click to expand...
Click to collapse
A Y cable is easy to make. In simple terms, cut off the USB plug (PC socket end leaving 3" or more cable on it) from your phones USB cable. Get a USB extension cable & cut off the female end and strip and join the female plug's cable to your phones USB cable matching the wire colours.
Insulate the green and white wires with electrical tape.
Get the USB (PC end) plug you cut off earlier and and strip the red and black wires. Cut off the green and white wires. Attach the red and black wires to the ones still exposed on the cable you just made and then insulate them too.
Plug mini USB into phone, USB (PC end) into.....P.C! Then shove a card reader / memory stick into the female USB port that contains your IMG.zip.
Bob's your uncle, Fanny is your Aunt and jobs a goodun!
I'm hoping someone can help me here, and before people say it, yes I have done a search and tried different options but nothing seems to work.
I'm on 0.93 hboot with s-off and fully rooted for years.
The problem?
I was running Nikez Rom on my Desire and it had a few rebooting issues but nothing to be alarmed of. However after one of these reboots the phone did not charge, computer displays a 'power surge on USB' message and disables usb port. Fastboot is not recognised and fastboot USB does not appear when I connect. Using adb does not identify the device either.
What I have tried to do to resolve
Having read several forum posts around USB bricks and fixing fastboot to changing mtd0.IMG files, nothing has seemed to work. Alternatively, it could be me not following things or not doing things in a logical manner. I have also done a factory reset and flashed sandvold Rom but that hasn't helped either.
Help
I am now almost at the end of my tether (no pun intended), so would really appreciate some help in trying to fix this problem.
What I have not done
I have not yet flashed the stock ruu, but not sure how that would work either if my computer disables the USB port anyway.
Skill level
I'm not an expert so please be gentle.
Thanks
Sent from my HTC Sensation Z710e using xda app-developers app
You are SOFF so the easy way to fix usb brick is to flash 4ext recovery since it has got an inbuilt usb brick repairer. However you are saying fastboot is not working. Even with usb brick fastboot should work. That leads me to believe that the problem may be elsewhere. I would check the computer once.
handy5876 said:
You are SOFF so the easy way to fix usb brick is to flash 4ext recovery since it has got an inbuilt usb brick repairer. However you are saying fastboot is not working. Even with usb brick fastboot should work. That leads me to believe that the problem may be elsewhere. I would check the computer once.
Click to expand...
Click to collapse
Thanks, tried 4ext fix usb brick option also, but did not work. I have a Sensation as well and that works fine re computer, so I don't believe it's a computer issue.
Also, the mains charger (plug) light goes off as soon as I put the Desire on charge but comes back on when I remove the phone from the mains charger - which leads me to believe there is something wrong with the phone usb software, but don't know what that could be.
Are there and other options for me to try? Is my phone usb bricked?
You can try the Unbrick option in 4ext recovery.
Also try on a different USB port or even a different PC.
techwiz98 said:
You can try the Unbrick option in 4ext recovery.
Also try on a different USB port or even a different PC.
Click to expand...
Click to collapse
Thanks - already tried these options.
Just responded above to a similar suggestion.
Any other help appreciated.
ac_utd said:
Thanks, tried 4ext fix usb brick option also, but did not work. I have a Sensation as well and that works fine re computer, so I don't believe it's a computer issue.
Also, the mains charger (plug) light goes off as soon as I put the Desire on charge but comes back on when I remove the phone from the mains charger - which leads me to believe there is something wrong with the phone usb software, but don't know what that could be.
Are there and other options for me to try? Is my phone usb bricked?
Click to expand...
Click to collapse
I dont think the problem is software related. I say this bacause the usb port is not working in either fastboot, recovery or rom. Each of these has got its own usb software and they cant all be bad. It seems to be hardware related. I got a feeling your usb port is fried. Most probably it has a short because your mains charger light is fanning out.
handy5876 said:
I dont think the problem is software related. I say this bacause the usb port is not working in either fastboot, recovery or rom. Each of these has got its own usb software and they cant all be bad. It seems to be hardware related. I got a feeling your usb port is fried. Most probably it has a short because your mains charger light is fanning out.
Click to expand...
Click to collapse
But could this happen while it wasn't connect via mains or computer?
How do I confirm this? Is there a solution if this is, in fact, the problem?
ac_utd said:
But could this happen while it wasn't connect via mains or computer?
How do I confirm this? Is there a solution if this is, in fact, the problem?
Click to expand...
Click to collapse
shut down the phone plug it in and see what the charger does.
or even pull the battery and plug it in. if theres ashort it should still be there
colin_404 said:
shut down the phone plug it in and see what the charger does.
or even pull the battery and plug it in. if theres ashort it should still be there
Click to expand...
Click to collapse
Pulled the battery out of the phone, out it on mains charge, but still main charger light goes off.
Tried another battery & it does the same thing. Tried different mains charger and it does the same thing.
How do I prove it's a hardware or a software issue?
Should I try a stock RUU?
Having read other forums regarding USB bricks, people have been able to access fastboot usb, but I can't.
So, I don't really know what the problem is.
I got fixed by this method.
androidforums [dot] com/desire-support-troubleshooting/485991-pls-help-stuck-cant-mount-sd-card-recovery [dot] html
check above link, replace [dot] 's with " . " (period)
boot to fastboot (back+power) and use the following command in command prompt
fastboot oem enableqxdm 0
This will enable the SDcard function in recovery
fastboot oem eraseconfig
This should fix the usb brick
reflash the rom you want from your recovery (you will need to wipe device via recovery 1st)
Click to expand...
Click to collapse
paddyankee said:
I got fixed by this method.
androidforums [dot] com/desire-support-troubleshooting/485991-pls-help-stuck-cant-mount-sd-card-recovery [dot] html
check above link, replace [dot] 's with " . " (period)
Click to expand...
Click to collapse
Thanks for your message, but the issue is every time I connect the phone to my laptop (and I've tried this on two different laptops), I get a message as below:
"One of the USB devices attached to the computer has malfunctioned, and Windows does not recognise it."
It seems the charge on the USB port of the phone has gone corrupt - if that's at all possible.
Once I get fastboot USB working, I'll be good to go.
I'm on BRAVO PVT1 SHIP S-OFF
HBOOT-6.93.1002
RADIO-5.17.05.23
Surely I can't be the only person to have this issue??
Also, I can access my sd card via ES Explorer.
On most of the usb brick issues, I believe the sd card is inaccessible. However, I can access it.
Therefore, I don;t even know whether my phone has a usb brick or whether it's something else?
Anyone?
Sent from my HTC Sensation Z710e using xda app-developers app
Did you try reinstalling usb drivers on your PC?
Sent from my toaster
yea...my username sucks...deal with it...
abaaaabbbb63 said:
Did you try reinstalling usb drivers on your PC?
Sent from my toaster
yea...my username sucks...deal with it...
Click to expand...
Click to collapse
The computer's not the problem The phone is.
Computer usb ports work fine with other devices and my sensation.
It seems that my phone has gone into a fully bricked state. Doesn't respond to the power button. If I plug the usb cable in tho I do get:
usb 1-1: Qualcomm USB modem converter now attached to ttyUSB0
and it shows up in lsusb.
Is there anything I can do in this state to unbrick my phone? Or shall I send it to somewhere that can jtag it for me?
Thanks
Julia
quixoticgeek said:
It seems that my phone has gone into a fully bricked state. Doesn't respond to the power button. If I plug the usb cable in tho I do get:
usb 1-1: Qualcomm USB modem converter now attached to ttyUSB0
and it shows up in lsusb.
Is there anything I can do in this state to unbrick my phone? Or shall I send it to somewhere that can jtag it for me?
Thanks
Julia
Click to expand...
Click to collapse
Could you tell us what happen just before that. Maybe it could help...