Boot image for XDAII - Upgrading, Modifying and Unlocking

I used ER2003Edit to load the O2 image instead of the QTek one. It creted two splash files. Where do I have to load them to change the boot image ? I hope I don't have to update my XDAII again...
Thanks,

Related

Help

I was unlocking my AT&T SX56 and the rom upgrade just stoped and I could not do anything to mak eit start up again. Now The pocket PC has upgrading rom always on the screen and I can gt active sync to even see the pc to try and flash it or upgrade the rom again. If you have any info you think that might help would be great. Thank you for your help.
If you still can get to the bootloader screen (power + soft reset), you can cook a new ROM as nbf file and use the SD flashing method.
Cool man I can get to that screen and will give that a go
Ok got a SD card and put on a new rom how can I make it load the info from th card. Also everytime I try and make a nbf file type it erros on me.
./mkrom.sh: ../../kitchen.local/mkrom-inc.sh: No such file or directoryno files for configid 26220739write xip block starting at 81800000, with 3 fileswrite xip block starting at 81980000, with 0 filesheader : No such file or directoryError creating new rom
I picked nb1 said was for flashing with SD card and can't get it to load.

problem with os image on axim x50v

i have a little problem with flashing my dell. before upgrading on him was wm2003se and i have downloaded a05 version of 2003se from dell web page. i tried to upgrade to wm5 and renamed WM50_B_A01_X50v_WM5_ENG_nb0.crc to DiMa_B_A01_X50v_WM5_ENG_nb0.crc and WM50_B_A01_X50v_WM5_ENG.nb0 to DiMa_B_A01_X50v_WM5_ENG.nb0. upgrading boot loader went successuful and after i press wl+pw+reset it starts sd loader but he cant see any os image (WM50_K_A01_X50v_WM5_ENG.nb0).
i tried to copy following files on sd card but he only see first image (boot loader image):
WM50_B_A01_X50v_WM5_ENG.nb0
WM50_B_A01_X50v_WM5_ENG_nb0.crc
WM50_K_A01_X50v_WM5_ENG.nb0
WM50_K_A01_X50v_WM5_ENG_nb0.crc
how to make him to run and see os image?
help
danijel
can anybody help me? why and how to make him to recognize OS image files (WM50_K_A01_X50v_WM5_ENG.nb0)?
i`am desperate....
you either need tzhe official Rom-Upgrade for WM5 (dell sold it once, now it may be available on ebay.)
the problem of yours is : you have wm2003se, so you have also the wm2003se bootloader (the dima_b_XXX-files) and just renaming the wm5-bootloader won't help, as it's different. and btw, i think for upgrading from wm2003se to wm5, you need the A00-image - the rest are just updates for wm5.
satani said:
you either need tzhe official Rom-Upgrade for WM5 (dell sold it once, now it may be available on ebay.)
the problem of yours is : you have wm2003se, so you have also the wm2003se bootloader (the dima_b_XXX-files) and just renaming the wm5-bootloader won't help, as it's different. and btw, i think for upgrading from wm2003se to wm5, you need the A00-image - the rest are just updates for wm5.
Click to expand...
Click to collapse
where could i download these files? i want to back to wm2003, so where i can download boot loader for and OS image fo wm2003?
i have made a backup of my OS but it extension is .RIS and dont know how to recover it, and also have a backup of boot loader of wm2003. what if i just recover my boot loader will it work because after flashing bootloader of wm5 it stop working? how could i use that .RIS file (34MB)?
please help me, i am a new in this area
drakic said:
where could i download these files? i want to back to wm2003, so where i can download boot loader for and OS image fo wm2003?
i have made a backup of my OS but it extension is .RIS and dont know how to recover it, and also have a backup of boot loader of wm2003. what if i just recover my boot loader will it work because after flashing bootloader of wm5 it stop working? how could i use that .RIS file (34MB)?
please help me, i am a new in this area
Click to expand...
Click to collapse
Code:
http://forum.xda-developers.com/showpost.php?p=1535377&postcount=1175
Code:
http://rapidshare.com/files/58078830/WM2003SE_A05_EN_X50v.rar.html
Just put the files on the SD Card, What have you actually installed? WM5 or 6 ? Then just rename de DiMa_B_ to WM50_B_ and flash as its written on the first post, I think that I put a guide inside the rar. I hope you win
Ah, you can make it using another way too. Go to dell page, support, download drivers... electronic, choose Axim, and X50. There, download the downgrade from WM5 to WM2003SE in your language, the rom I gived you before is the english version, maybe you want another language. Extract that exe with winrar or simply ejecute it, and dont continue, quit, go to c:/Dell... ROM and inside you will se a rom.IMG. Well, you need img2nb0f.exe, to convert the .IMG to .nb0
When you get he .nb0 file you have to create his _nb0.crc Maybe CRC Calculator help you or simple put the files on the SD Card and when you choose the SO image ( _K_ ) it will show you a CRC error, simple copy the good CRC, modify on the file on your PC, and put it again on the SD Card.
I could make it for you (if you dont know what are you doin), if your language isn't english.
This is only if your language isn't english, remember, if its english its more easy and save time, read the post #5
migatxu said:
Code:
http://forum.xda-developers.com/showpost.php?p=1535377&postcount=1175
Code:
http://rapidshare.com/files/58078830/WM2003SE_A05_EN_X50v.rar.html
Just put the files on the SD Card, What have you actually installed? WM5 or 6 ? Then just rename de DiMa_B_ to WM50_B_ and flash as its written on the first post, I think that I put a guide inside the rar. I hope you win
Click to expand...
Click to collapse
before anything i have wm2003se a01, then upgrade to a05,after that i downloaded wm5 boot loader and renamed WM50_B_A01_X50v_WM2k3SE_EN_nb0.crc & WM50_B_A01_X50v_WM2k3SE_EN_nb0.crc to DiMa_B_A01_X50v_WM5_EN_nb0.crc & DiMa_B_A01_X50v_WM5_EN_nb0. i copy these files on sd card and press wl+pw+reset and he read these images successufull. he asked me to press pw+reset, a pressed WL+PW+RESET and after that he dont want to boot but i can load sd loader (pressing wl+pw+reset) but he cant see wm5 OS image (WM50_K_A01_X50v_WM5_ENG.nb0).
now i will then copy on my sd card this boot loader Dell Axim X50v WM5 A02 Bootloader.zip and upload him on my axim x50v, and after that i will start OS upgrade with WM50_K_A01_X50v_WM5_ENG.nb0? is this what you mean?
i want to install english version of wm5 (there isnt croatian version), but i am seems to me stuck on wm2003se...
will this help what you have written to me? i dont want to make worst **** or it cant be worst
thnx
danijel
OK you want to install WM5 English, but what operating system is in the device? Its important to install the correct bootloader with the correct prefix. Then the SD Image Loader will see the operating system ROM.
now i will then copy on my sd card this boot loader Dell Axim X50v WM5 A02 Bootloader.zip and upload him on my axim x50v, and after that i will start OS upgrade with WM50_K_A01_X50v_WM5_ENG.nb0? is this what you mean?
Click to expand...
Click to collapse
Not, with WM50_K_A02_X50v_WM5_EN.nb0, I gived to you a rapidshare link with it, and inside the bootloader too, but if you had installed Dell Axim X50v WM5 A02 Bootloader.zip go to flash the SO directly.
When the so image isn't seen by the SD Image Loader, Im sure that its because its something wrong with the bootloader or SO prefix.
At the begining its a chaos, but when you understan how it work, its very simple. And a bootloader change its only needed to change from a 2003 SE version to WM5 or 6 and vice versa, not change needed to change between WM5 and WM6 and vice versa.
before and after I had wm2003se ao5, because only thing i made was upgrade boot loader (changed WM50_B_A01_X50v_WM5_ENG.nb0 to Dima_B_A01_X50v_WM5_ENG.nb0 and upgrade that successuful what he say, but after that he cant see os image WM50_K_A01_X50v_WM5_ENG.nb0).
you gave me this rapishare link (http://rapidshare.com/files/58078830/WM2003SE_A05_EN_X50v.rar.html) not for WM50_K_A02_X50v_WM5_EN.nb0 or iam missing something?
so whats your suggestion for me to do now? if i upload now Dell Axim X50v WM2003SE A05 Bootloader (rapid share link you gave me) will it start wm2003se just how it was before, because only thing i have upgraded was boot loader? because he now sees wm50_B_ but cant see files for os image. could you upload on rapidshare your WM5 OS image files to try with your or should i just try uploading wm200se a05 bootloader files?
danijel
drakic said:
before and after I had wm2003se ao5, because only thing i made was upgrade boot loader (changed WM50_B_A01_X50v_WM5_ENG.nb0 to Dima_B_A01_X50v_WM5_ENG.nb0 and upgrade that successuful what he say, but after that he cant see os image WM50_K_A01_X50v_WM5_ENG.nb0).
you gave me this rapishare link (http://rapidshare.com/files/58078830/WM2003SE_A05_EN_X50v.rar.html) not for WM50_K_A02_X50v_WM5_EN.nb0 or iam missing something?
so whats your suggestion for me to do now? if i upload now Dell Axim X50v WM2003SE A05 Bootloader (rapid share link you gave me) will it start wm2003se just how it was before, because only thing i have upgraded was boot loader? because he now sees wm50_B_ but cant see files for os image. could you upload on rapidshare your WM5 OS image files to try with your or should i just try uploading wm200se a05 bootloader files?
danijel
Click to expand...
Click to collapse
First, be sure that you write correctly the name, DiMa, WM50, etc..
Second, download this
Copy it to the SD Card, If the bootloader prefix es DiMa, rename it to WM50, because you already have the WM5 bootloader, and flash it, make a Hard Reset, and go to the SD Image Loader again, you must see the WM50_K_.. Try it
migatxu said:
First, be sure that you write correctly the name, DiMa, WM50, etc..
Second, download this
Copy it to the SD Card, If the bootloader prefix es DiMa, rename it to WM50, because you already have the WM5 bootloader, and flash it, make a Hard Reset, and go to the SD Image Loader again, you must see the WM50_K_.. Try it
Click to expand...
Click to collapse
so you mean to rewrite boot loader with a02, and after that press pw+wl+reset and again go to sd loader and run wm50_k_.... OS image?
1. copy wm50_B_a02...
2. run sd loader and write this wm50_B_a02... sd boot loader
3. press after that wl+pw+reset
4. read WM50_K_...
5. hard reset
is this write procedure?
thnx
1. copy wm50_B_a02...
2. Hard Reset
3. run sd loader and write this wm50_B_a02... sd boot loader
4. press after that wl+pw+reset
5. read WM50_K_...
6. hard reset
is this write procedure?
Try now
migatxu said:
1. copy wm50_B_a02...
2. Hard Reset
3. run sd loader and write this wm50_B_a02... sd boot loader
4. press after that wl+pw+reset
5. read WM50_K_...
6. hard reset
is this write procedure?
Try now
Click to expand...
Click to collapse
on 1. i mean to copy all files to sd card and first upload sd loader a02 and after that go to 2.
just to be sure that we are thinking same
I know that you mean that
Can you work it out?
migatxu said:
I know that you mean that
Can you work it out?
Click to expand...
Click to collapse
well, my friend it is working, i dont know how to thank you...
one last question, what image now i have to upload on him to have wm6, or it isnt matter?
i have downloaded these images from this site:
X50v_WM6_A02_PR1
X50v_WM6_A02_PR2
X50v_WM6_A02_RC1
X50v_WM6_A02_RC2
also have this (WM6_A02_RTM_By_Maglite_-_Zeus_Alex_Change_of_PP_to_0Mb ) but don want more troubles with him.
is there any procedure which file need to be first or i can just upgrade to last OS image with all fixes?
should i download first Download Dell Axim X50v WM6 A01 ROM and then go to Dell Axim X50v WM6 A02?
thnx very very much
danijel
You beat it! A very good new Drakic
Remember, you dont need to install the bootloader anymore, only if you have problems to boot, or if you want to install wm2003se.
Well, al these roms are older than the A02 RTM, my device has it, work very good! But I only have the original A02 Maglite with the 4mb of page pool, it works fine, now, I changed the page pool to 3mb with PPFE or something like this, is in the first post. More page pool = more fast and estable system, to use with many apps at time, but less free ram, less page pool, more free ram, but... vice versa, I only open 2 or 3 apps, and for now with a page pool of 3mb works fine, like with 4mb. For the firs time install the original 4mb page pool A02 RTM and test.
Ah, you can install the A02 RTM directly
thnx very much one more time for this help and help before. you saved my and life of my axim
danijel
you've now +100 experience Its funny to test all the available roms. Have you test WM5 A03 by MagLite? I invite to you It was a pleasure, now you can help to somebody with the same problem. Enjoy your X50v, you can install three different Windows Mobile versions! That's fantastic!
Nice to help you Danijel
Miguel
yes, now i have very very experience, two weaks old dell almost dead i think i will try first that wm6 a02 rtm, and after that 0mb PP. lot of them say it works great so i will try it...
it was pleasure working with you....
hear again, hope not when i have problem
danijel

Problem after flashing Trinity with rom Ausdim WM6.1 V3

Hello everybody, actually I flashed my trinity with rom Ausdim WM6.1 V3 LIGHT , but i found a problem with this rom, in fact, in my device, i can not install or execute any other application, so i tried to flash an other rom (Mary SL 3.7) but in vain, i tried with SSPL-Trin but i coudn't execute it from my pda ( a problem of a security certificate or something like that) and when I push power+Camera+reset , i can access to the bootloader spl-1.07.0000 but when i try to flash , the operation stops at 2% and i receive an error : file corrupted. I tried with other cooked roms but i have always the same problem. An the last thing i've tried was trying to flash system from the minisd card, i formatted it to fat32 an i put the file TRINIMG.nbh but when i boot in bootoader it shows a message "loading..." then it shows a number "00068002", so could you please help me and thank you
=======Problem solved==========
Hi!
Can you please post how you solved the problem, to help other people that maybe have this situation in a future?
Thanks!
Actually i realized that i coudn't flash any other rom with the original SSPL, so i had the idea to try with the original htc wm5, and it worked.
you really need to flash hard-spl as well.. you're playing with fire

Need Help "unbricking" my friends phone

Friend got a vogue but he "bricked it" he doesnt even remember what he did,
he is very new at this and looks like he did a rom update without doing a radio update first.
i have an HTC titan but i am going to buy this vogue off of him if i can fix it.
so here is the issue...
when u start the goes it goes to the 3 color tri-color boot screen...
it goes right there without even me holding down the power and camera buttons.
i used mtty to get it out of that screen... i do set 16 0 and some other thing i can't remember for the life of me now in mtty
i reboot the phone and now it get the a custom Dette clean rom 6.1 splash screen but it says no Radio and it now just stuck there.
i tried to load the stock rom on a 2 gig fat32 formated flash card and inserted it into the phone. then boot it to the 3 color screen, and it just says no file! in gray backbground then goes back to the tri color screen...
i made sure the name was correct.. i tried "Voguimg.nbh" i tried "voguimg." and just "voguimg" then i tried it in all caps and then all first letter cap then rest lower case...
it is spl-2.01.1000
i think my friend flashed the rom without upgrading the spl as well.
i tried to flast it with sp 2.31 but i couldnt get it to load it. i guess i can't flasth to 2.31 in the tri color screen...
any ideas? any help would be greatly apreciated. spent about a week on this... probably about 2 to 3 hours reading and reseaching daily.
Duplicate msg
I even tried to stock vogue roms (this is a verizon phone)
but i tried even the following sprint stock roms:
RUU_Vogue_SPRINT_WWE_1.12.651.1_2.13.00_SPC_NV133_Ship.exe
this gets me to 1% then errors out
and says error 328 invalid command, this update utility can not be used with my phone. please check my update utility... wat
RUU_PPST_Vogue_SPRINT_WWE_3.03.651.2_Radio_3.42.30_AM_NV_2.04_Ship.exe
this one stays at 0%
tried the verizon stock rom...
which stays at 0%
i dont know if the spl has something to do with it but i read the first file i mentioned the stock rom 1.12... reloads the spl, boot loader, everything to original.
I noticed when I first flashed my phone, also xv6900, that when I was unlocking, I didn't fully complete it, and it showed SPL version 2.10, or something along that line.
There is no stock VZW ROM available, so that's a waste of time. I think the first problem is, you have no idea how it got that way. I'd assume your friend didn't complete the unlocking process, then ran the RUU for the new ROM.
I'm not 100% sure, hopefully someone can either correct me on this, or confirm.
You should be ok since you can enter the bootloader. Perhaps you could try relocking it, you would use ImCokeMan's relocker, should be SPL version 0.43. Then you could try unlocking again.
I'd suggest checkin at PPCGeeks, asking in either the general Vogue flashing threads, or try asking ImCokeMan himself.
i will try .43, i am trying .41 but it keeps saying no device connected would you like to try copying again?
on this screen :
*
* Vogue/Sprint Touche CID unlocker utility
*
* Total process may take about 5-10 minutes depends on CPU speed.
*
Connect your device via activesync before continuing.
Press any key to continue . . .
Initializing..
wow fixed it. it wsa something so simple. must do quick format rather than full format on the mirco sd card....
meh
chewbaaka said:
wow fixed it. it wsa something so simple. must do quick format rather than full format on the mirco sd card....
meh
Click to expand...
Click to collapse
Good to hear! For future references could explain step by step what you did to solve it?
Thanks!
actually i thought it was working... but now it is stuck at the
"Loading... " screen
i have verizon... using a verizon signed ruu
when i use a sprint signed ruu it says
Loading...
then in 2 seconds... it says
Checking...
then in a few seconds it says....
Not Allowed...
then goes back to the tri- color screen
ill let it stay at Load... and then goto sleep and see if it finished tomorrow morning before football starts
unbricking ur phone
Unbricking Vogue / and downgrading SPL
--------------------------------------------------------------------------------
Edited *This will help those that are stuck at the HTC welcome screen and cannot get past it to load IMCokeMan's Unlocker.**
Edit by ImCoKeMaN: If you are stuck in bootloader (3 color screen) use titanexitbl or mtty (set 16 0 then task first and try these steps only if that doesn't work.
Apparently you can not use SDHC cards with this method, please use the 512mb card that came with your phone.
I have successfully unbricked my phone due to updating the Alltel rom to a non Alltel Vogue, before IMCokeman had released his unlocker an also have downgraded to the previous SPL version. I will shortly update this post with the How to instructions. I just need to retrace my steps.
I would first like to thank IMCokeMan for his help and unlocker.
I currently have a Sprint Vogue but I assume this will work for all versions
For those that had loaded the Alltel rom without the unlocker and have bricked there phone try this procedure to unbrick your phone.
1. First download IMCokeMaN's 2.31 Unlocker. http://rapidshare.com/files/11019074...r_MFG_2.31.exe
2. Extract IMCokeMan's unlocker
Previous SPL version was 2.31 current SPL version is 0.36
Edit by ImCoKeMaN:
Note: Steps 3, 4 and 5 should not be necessary, but step 6 is critical that it is a signed rom from your carrier
3. Navigate to the extracted folder and within the folder you will find the following file called VOGUIMAG2.nbh and rename it to VOGUIMG.nbh
4. Copy the file to a fat32 memory card, and insert it back into your phone, and place it into bootloader mode.
5. The phone should display Loading... let it sit there for a minute or so. It will not go past this screen, now reboot the phone.
6. Extract your official rom using WINRAR by right click and extract files (Must be a signed EXE from your carrier get it from HTC support website)
7. Navigate to the extracted folder and within the folder you will find the files
8. Copy the files to your memory card (less than 2gb and formated fat32) and insert it back into the phone and place it back into bootloader mode(POWER+CAMERA+RESET USING STYLUS), and install the your Carrier's Official ROM.
I have attached the VOGUIMG.nbh file for those that are having problems.
patelaquib said:
Unbricking Vogue / and downgrading SPL
--------------------------------------------------------------------------------
Edited *This will help those that are stuck at the HTC welcome screen and cannot get past it to load IMCokeMan's Unlocker.**
Edit by ImCoKeMaN: If you are stuck in bootloader (3 color screen) use titanexitbl or mtty (set 16 0 then task first and try these steps only if that doesn't work.
Apparently you can not use SDHC cards with this method, please use the 512mb card that came with your phone.
I have successfully unbricked my phone due to updating the Alltel rom to a non Alltel Vogue, before IMCokeman had released his unlocker an also have downgraded to the previous SPL version. I will shortly update this post with the How to instructions. I just need to retrace my steps.
I would first like to thank IMCokeMan for his help and unlocker.
I currently have a Sprint Vogue but I assume this will work for all versions
For those that had loaded the Alltel rom without the unlocker and have bricked there phone try this procedure to unbrick your phone.
1. First download IMCokeMaN's 2.31 Unlocker. http://rapidshare.com/files/11019074...r_MFG_2.31.exe
2. Extract IMCokeMan's unlocker
Previous SPL version was 2.31 current SPL version is 0.36
Edit by ImCoKeMaN:
Note: Steps 3, 4 and 5 should not be necessary, but step 6 is critical that it is a signed rom from your carrier
3. Navigate to the extracted folder and within the folder you will find the following file called VOGUIMAG2.nbh and rename it to VOGUIMG.nbh
4. Copy the file to a fat32 memory card, and insert it back into your phone, and place it into bootloader mode.
5. The phone should display Loading... let it sit there for a minute or so. It will not go past this screen, now reboot the phone.
6. Extract your official rom using WINRAR by right click and extract files (Must be a signed EXE from your carrier get it from HTC support website)
7. Navigate to the extracted folder and within the folder you will find the files
8. Copy the files to your memory card (less than 2gb and formated fat32) and insert it back into the phone and place it back into bootloader mode(POWER+CAMERA+RESET USING STYLUS), and install the your Carrier's Official ROM.
I have attached the VOGUIMG.nbh file for those that are having problems.
Click to expand...
Click to collapse
these instructions do not seem to work me.
he has a sprint phone... he assumes it works for all types but i have a verizon phone... and on a signed verizon nbh file ... it only says loading... and gets stuck there... on step 6... and a sprint rom says loading.. and then says checking right away and then says not allowed in red and goes back to the 3 color screen.
also the poster of this mentions he has spl 2.31... my spl says spl-2.01.1000 which is not .40 .41 or 2.31 (the most comment spl's i have seen referenced)
has anyone ran into these conditions? spl 2.01... stuck, and has verizon.
mine was originally stuck at the 3 -color boot screen... even after taking battery out and putting it back in and just powering on without holding camera-power keys... it goes into the boot screen only...
so i used mtty did set 16 0 and then "boot" and now when i restart the phone it goes right to the splash screen and gets stuck there saying dette's clean rom ... but "no radio" and just stays there.

How to change splash screen boot on TCL P60 ?

Hello everyone. I'm coming to you for help. I am desperate to change the logo of my splash screen, just before the animation.
On the forum 4PDA, I was told that it was in the blocks "mmcblk0p20" and "mmcblk0p21". I can extract these files, but can not edit or mount (via shell). And I do not know which partitions it corresponds to (cust.img, splash.img, misc.img ...?).
Would someone have a track?

Categories

Resources