Hi all,
I couldn't unlock the new ROM from Siemens A.30.09, radio A.33.02, Protocol version 1.3.3. Using XDAManipulator it showed SID lock <NONE>. However when I inserted a non ATT SIM it asked me for unlock code. I've tried to reverse back to the 2002 but XDAmanipulator couldn't detect any lock either. I don't know any clue.
Thanks
MDD
Try installing xda developers special edition rom 1.2.
installing XDA developers Special Edition ROM 1.2.
Thanks! I've tried it and XDAunlock could unlock the phone. It took me some time to do SD flash of the 1.2 and then upgrade to the latest ROM. It work with Cingular SIM now.
Good for you, glad to be of assistance. 8)
Related
I have an AT&T Siemens SX56. I used the XDA-developers Special Edition ROM v1.2 to get my SIM Lock disabled. I have T-Mobile service and my T-Mobile SIM now works, hoooray!
However!, The version of Pocket PC on this ROM is not to my liking.
I went to siemens site and they offer the latest Windows Mobile 2003 for my device, however I can't use it becuase my ROM versions don't match.
IS there any way I can upgrade the latest Windows mobile 2003? What would be the recommended method?
My current SX56 info:
Rom Version: 3.17.03 ENG
Radio Version: A.33.02
Protocol Version: 1.3.3
Model No. says: PW10a1 (even though it says on the back PW10b1)
MS Pocket PC 3.0.12039 (build 11178)
Any help or advice would be appreciated. I scared to do anything for fear that using a ROM kitchen might toast my ROM
ANY advice on this would be greatly appreciated!!
Thanks,
Brock
the rear sticker is THE right one .. your device is B and it works on 900/1900 MHz.
As long you don't touch the RSU part and you are using the SD method for ROM flashing, there is almost nothing can go wrong for using the kitchen for ROM cooking. I can't remember how many times I flashed my ROM
You can get more details by reading through this forum carefully.
Good luck
Hmm... So what version of ROM on this ROM kitchen website would be most recommended: http://lumpistefan.dyndns.org/ ?
Also is there a reason why you are only allowed 3620kb of ROM space? I thought my device had 32MB?
All I would have to do is create the ROM on that site save it as a .exe and then it would do everything else?
Thank you for the quick reply!
I forgot to mention that I have the Wallaby Boot loader version 5.22, if that makes any difference.
I also was wondering if the newer radio versions make any difference on reception/clarity/availablity of a signal????
Another thing I was wondering about is... How come on this ROM kitchen website http://lumpistefan.dyndns.org/ I have to e-mail information and await instuctions to proceed? Does he have to give me a special number that is generated to make the ROM I downloaded work w/ my IMEI or device?? Or is that totally not right???
Thanks again,
Brock[/i]
hi
i have xda1 boot ver 5.22 please tell how to unlock
rom ver:3.12.07eng
romdate:08.13.02
radio ver 4.06
protocal :32s54
regards
gsm killer
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz
i have a 3.17.03 O2 euro rom and cooked several different rom from lumpistefan and still have the lock..
here is my device information :
ROM version : 3.17.03 ENG
Rom Date 05/15/03
Radio Version : 6.25.02
Protocol version 324e4
When you cooked the rom did you check the box for xdaunlock? Sometimes the xdaunlock program does not run automatically, if this occurs you need to look for the xdaunlock program on your phone and execute the file by double tapping.
i even run the xda developers special edition rom v.1.2 and still have the device locked.
i copied the xdaunlock program into the device and run it, "ERROR GETTING UNLOCK CODE" what could be wrong?? checked the bootloader and the GSM is OK.
I can unlock it for you!
cgigate, it would be much more helpful and more in keeping with the spirit of this forum if you told the guy how to unlock his phone instead of looking for business. I am not against you earning a living, but I dont think this forum was set up as a commercial venture. If it is impossible for the person to unlock the phone themself then obviously it is an option for him to send it to you to attend to.
how much you charging for unlock?
hi,
first i'm really glad to find this forum. i am a palm refugee and am desperate to switch platforms. someone is offering me an sx56 that has already been upgraded to wm2003. i think it still has a subsidy lock. what will be the easiest way to unlock? thanks for a wonderful forum!
You will need to downgrade, it would be best to download the special edition rom, this will unlock your phone, you can then restore your current rom if you backup your rom to sd card before flashing. You can also make your own rom and use the unused space in rom for other programs, here is a link to the rom kitchen.
http://lumpistefan.dyndns.org/
I am not sure if xda manipulator works under wm2003 but this requires a serial to xda cable to work also.
ok, i don't think i will need anything on it from the previous owner. so if i just downgrade the rom with the one you specified, then upgraded with the wm2003 rom (i found a copy earlier today), that would do the trick?
thanks
worked like a charm. thank you!!!
Hi All
I am new to this forum, I would like some help if at all possible with an xda 1. It is locked to 02 and needs something called a sid code?, I have read some posts on this forum and they do offer ways to unlock the code. But as I am very new to computers and also ppc's I am finding it hard to understand what I need to do, if anyone could send me simple to follow step by step instructions for a computer dummy that would be great. From the forums that I have read I am very worried that I will make my ppc un-useable, wipe it clean or make it die totally. Can anyone offer any help at all.
Information that is on the xda 1,
Rom version: 3.17.03 ENG
Rom date: 05/15/03
Radio version: 4.20.00
Protocal Version: 32S54
Model No: PW10A1
Best regards, atmitch
Should be aesy in your case....
1. Download http://wiki.xda-developers.com/uploads/XDAunlock.exe
2. Copy file to your xda
3. Run the xdaunlock file on your xda.
This should be all to unlock it.....
Stefan
T-Mobile Pocket PC 2003
I have a US T-Mobile PPC 2003 and I cant use my UK T-Mobile sim card in it. I tried usind an O2 card but it asked me for an SID code, so I tried to use the XDAUnlock program but it just wont work? Does anyone have any ideas? I also tried using the Bandswitch program but that does not work either?
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz
Stefan
XDA unlock
Hi,
I tried the xdaunlock code on my xda and get the message 'error getting unlock code'
Model no PW10A1
Rom version 3.12.07 ENG
ROM date 08/13/03
Radio version 4.06
Protocol version 32S54
any help appreciated
Thanks,
Mogens
Ditto
Mine is teh exact smae model and it did the same thing... ANY help apprieictaed!!!
I have run the Xda Developers XDA11UNLOCK tool v1.2 it reads after opening the comm port The phone seems unlocked already ,but when i put a simm card in not O2 T-mobil etc it states ,network is locked ask's for code which i input 2040248 push ,ok,It then states incorrect code you have tried 2147467258 times,please wait until time out.HELP PLEASE in simple language as I am not that computor literate THANK YOU!!!!!!!!!! :roll:
rom version1.60.00wwe
ron date 12/03/03
radio version 1.10.00
protocol version 1337.18
extRom version 1.60.50
XDA II unlocking problem need help for reflashing
i have the same problem. me being so stupid paid GSM liberty 80 USD. and i am getting same message. we need help can somebody advise us what we are doing wrong.