Related
Has anyone sucessfully installed MS Voice Command 1.5 with the New ROM (Jasjar ROM 1.30.68 WWE, Radio 1.09.00, extROM 1.30.153)? It installs but when I run it I get an error message and it disables itself. Any suggestions?
Thanks,
Sven
I have VC working fine with the new ROM - installed and worked just the same as before, so does the reg hack to enable operation via BT headset...........maybe if you try it again (re-install?) it will work
works fine on mine.
@sbatxda I had the same issue, VC would just close itself...what worked was a simple soft reset, I only figured this out after pulling out all my nose hair but hey it's never to late to learn Just do a soft reset an it should work as normal.
sorry, i assumed a soft reset was a foregone obvious solution and would be done automatically by anybody that has any knowledge of any microsoft system.
if in doubt, reset
youmeus: it worked ok on the new ROM then? I'll try to upgrade soon I guess then..
V
MS Voice Command 1.5
Thanks for the suggestions. I have made the register modification to get it to work with my BT headset and I have made multiple soft resets. I have some issue with the Voice Command install in that I have to first install the 1.0 version and then the 1.5 version; if I go directly to 1.5 the install tells me that there is no previous version and stops. This may create some issue, but this is also how I did it with the previous ROM version. I'll try a re-install again.
Regard,
Sven
@vijay555, yes I tried it again and it works ok now...but this new rom has a few issues that I am not comfortable with so I am going back to old rom once I get home later
@sbatxda, the better way to install VC is vis the cab file...just look for the cab file on your desktop eg C:\Program Files\activesyne\voice command\...etc and drag the cab to your PPC.
MS Voice Command 1.5 installation
Thanks youmeus,
Installing the .cab worked better.
I'm now having difficulties installing the .cab file with my ISP settings. It will not install on my device or storage card. This worked fine with the old ROM.
Ideas anyone?
Regards,
Sven
BT hack reg
@adesonic
installed and worked just the same as before, so does the reg hack to enable operation via BT headset...
Click to expand...
Click to collapse
please tell me the issue about this or send a link in a thread. VC 1.5 doesn't work with my BT headset.
DTR - try this - copied from another thread on here
MS Voice Command activation from BT headset
Now this one is sweet and makes the JASJAR the daddy for voice commands.
Install Voice Command to the default location.
Fire up a registry editor
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
Modify the string marked "path" from the default \Windows\SDDialer.exe to \Program Files\Voice Command\VoiceCMD.exe
Now, when you press your BT headset connect button, MS Voice command will fire up and take commands through the headset. It's reponses will be played through the headset too.
regs
sonic
@adesonic
oh, thatone I shure did try. But, having a Magician, I obviously had no success.
Maybe the fault is with the i-tech headset, which probably doesn't support connection.
I also had no luck with streaming audio to that headset, which some posts in other threads say is possible.
Thanx neverteless for your fast reply.
regards
Why haven't MS upgraded this software to a proper WM5 version yet?
OR have they and I haven't been paying attention?
Question: Earlier I and others have had problems with showing of contacts displaying a blank page.. Are you guys able to show contacts using Voice Command properly?
@eman, you have to add one the files form the VGA hack in your windows folder for VC to display contacts...I can't remember the name of the file so do a search on the board!
Great to know there's a solution.
Installing VC now
with the previous ROM there was the issue where it didn't work in laptop mode with the lid closed. Does VC work in that mode now, or are you guys using it in portrait mode?
It would be great if it did.
the file needed is outres.96.dll
no VC doesnt work when the clam is closed.
even on the latest release.
I just received a tmobile dash and had a couple questions for you guys.
What are the most functional modifications you guys have performed or the mods that you would recommend? I've read through some of the threads and i'm not sure where to begin, what will increase performance and use-ability?
I will primarily use the phone for internet, phone, messaging, and i would like to run pocketnes, but i have seen some of the themes you guys have and love the layouts.
Any advice you can offer about the phone, altering its performance (or making things easier or more accessible) is greatly appreciated
Thanks in advance
I would suggest to go with the 6.1 rom which I have below. Its really nice and it has nice interface. In order to install the rom go to the link below, download, and run auto.bat on your phone. Then use the configurations I have posted below to configure your phone (like internet, mms, email, etc.). Let me know if you have any problems.
do i download this using my phone, or should i download it on a pc and then transfer it over?
thanks for the help
Download and then extract the file and plug your phone in and run auto.bat and it tells you what to do on the screen.
i bet you he gets an error... lol
k, i need to setup a pc cause i have a feeling doing this on a mac won't exactly work
ERabbit said:
k, i need to setup a pc cause i have a feeling doing this on a mac won't exactly work
Click to expand...
Click to collapse
I doubt it, because you'll need to run ActiveSync (Windows XP) or Windows Mobile Device Center (Windows Vista) to connect your Dash.
Hello, everyone, I hope no piss anyone about this old OS, but I have no choice on my iPAQ Rx3115 'cause HP never releases an OS update for this pda, since it has decent features and mine is in perfect shape and it's a shame that a lot of programs cant be installed in this OS.
So, that's why i want to edit the ROM of this PDA, made a custom one with new programs and delete the old ones and the ones that are obsolete (like the MPG player, since tcmp and coreplayer cant play everything).
This forum is big, i was searching for hour about resources and "how to do that", I use EM2003 and when i try to open the rom file it tells me that enter a password to unlock the ROM.
So pleasse guys, help me out, I want to guive a full new life to this PDA and keep using it, and of course I will release the ROM for everyone to use it as I made stable ROMs.
Thanks and regards.
c'mon guys, help me a little, a need something to start with, a tool, program, anything?
thanks
I know this is old but I'd just like to second this, if anyone has any info on how to upgrade this device that would be great as I just sort of "stumbled upon" one of these and would like to put it to good use.
I've done a lot of searching and can't find any roms for rx3115 IPAC. I have one of these too and would love to fiddle with it again!! I even found on forum that said that it would not support WM 5 or 6 so I don't now if there is much hope. But if there was a program or instructions on how to make our own ROM I would sure like to try!!! I believe it has WM 2003 CE on it now...
Me too!!! I too have one of those...
rx3115
I have an rx3115 also. I am following this thread.
This will be quite difficult and complicated, first of all, what do you want to do with stock ROM? If some apps can't be installed on WM2003SE, then adding them to ROM won't change anything. However, I'm willing to help, send me a PM with stock ROM and changes you want, I'll try to develop somethin' good .
Thanks tomcug!!!
I'll also PM you the links from this post.
I too have an rx3115 and have been searching all over for ways to upgrade it: cooked ROMs, Linux, Unix... SOMEthing. LOL
So far you're the only cook who's wanted to take a swing at this. There are no easy answers for rx3115 that I can find anywhere on the net.
Here's the last official rx3115 update of WM2003 (1.01.11) complete with installer
http://www.mediafire.com/file/i6k0935chhkgzlh/iPAQ rx3115 ROM 1_01_11.exe
I'd hate to lose the Nevo (IrDA universal remote control) from it, but would sacrifice that if I could upgrade the OS...
Better yet - maybe you could work with this WM 6.1 Classic ROM that was cooked for the rx1950. It supports the ARMv4T instruction set used by the rx3115. Here is just the .nbf file
http://www.mediafire.com/file/iu9p815w3yjpy6h/CEOS.nbf
At 27.82mb it would just fit on rx3115. Maybe a slimmed down version??? I would leave it to you to decide what to remove. LOL who am I to tell a cook how to season his offering???
And the WM 6.1 install cab for Mobile Office
http://www.mediafire.com/file/nmz3sbyuxan7c4e/office_wpc_WM6.CAB
Of course - any help would be greatly appreciated by many rx3115 owners.
And here's my thread of what I've been trying to accomplish with my rx3115.
http://forum.xda-developers.com/showthread.php?t=981868
Thanks Again,
RumoredNow
All right, then I'll try to do something good . I don't know if this will work and that's why I need to ask you one more thing. Is it possible to flash this phone when it's not booting? I mean windows hangs.
It's a straight Pocket PC with no Phone capability. Full specs are here:
http://www.pdadb.net/index.php?m=specs&id=122&view=1&c=hewlett-packard_ipaq_rx3115
Short answer: yes, the ROM is user flashable up to 28mb of 32mb total.
Long Answer...
The HP update I sent you will flash the ROM under Win XP with ActiveSync installed. The RUU (ROM Update Utility) needs RAPI.dll from ActiveSync in order to run. It won't function under Win 7 for me - it generates a comm error.
Theoretically it is possible to flash any (size appropriate) ROM to the device with this Universal iPAQ Bootloader:
http://sourceforge.net/projects/ubl/files/ubl/Binaries/
My system flagged the UBL as having a Worm in the Vista Drivers though. I can't tell if it is a false positive (I'm not qualified for that) so I didn't use it under Win 7.
Instead, I stripped out the infected(?) bits and tried it on an XP box. Here's that file:
http://www.mediafire.com/file/7anraar1tkc3lz1/BootLoader.rar
It fails to put rx3115 into bootloader mode even though it connects via USB.
There is a manual way to put rx3115 into Bootloader mode: MultiMedia (button 1) + iTask (button 4) + Power + Reset. But every time I put it in Bootloader mode manually, that seems to kill the rx3115's USB port. It becomes invisible to PC... I don't know if there is another step to manually enable USB mode under Bootloader. I haven't been able to find the right button(s) for that so far...
And manually entering Bootloader mode hasn't allowed me to flash from SD card either. I always get a "Wrong Image" error, even with .nbf file from the last official update!!!
I know it's not the device - I can reflash the last update over USB on a Win XP box if I use the official update package.
LOL - an executable which uses HP's RUU would be preferable for technologically deficient users such as myself.
Feel free to PM me or post back here if you have any more questions.
Thanks again.
Well, no progress at the moment and probably there's won't be any progress at all. I don't know how to extract CEOS.nbf, all tools I've tried can't do it.
By extract, do you mean view and edit???
uedit32 (hex editor???) will open it and allow changes to be saved. It even keeps the original version as a backup...
http://www.mediafire.com/file/6r8ffn1fq3bh9mu/uedit32.exe
Making ROM with hex editor ? That would take hundreds of years or even more . What I need is a tool or set of tools that can extract XIP and IMGFS from CEOS.nbf, that's the way you make ROM's. And tools I've tried doesn't work for this phone, however they work for HTC and i-mate phones I own.
EDIT:
I've also tried rx1950 kitchen, but it's a fail too. There are tools there but only for making CEOS.nbf from XIP and IMGFS images, nothing what I need .
Looking for the 802.11g mod for rx3115
I saw an experimental mod somewhere to enable the rx3115 to use 802.11g. If anyone knows where it is, please share. I lost the link. I was looking up the embedded chips at the time I saw it, so I think it was a forum.
All right, making a little update here. After long time of hard work I need to say that it's impossible to make WM 6.5.3 ROM for this device, drives and OEM stuff from WM 2003 SE simply won't work with any newer OS. Sorry for that but there's nothing we can do .
Hi, Ive been dealing with a problem
I flashed new ROM, a clean one (w/o manila, titanium etc., Im using SPB MS), but there is kind of no ActiveSync. When I connect my device to PC (USB) there are 3 options (ActiveSync, Mass storrage, Internet sharing) but when I want to setup Google Sync, I need some ActiveSync app which I simply dont have (Ive tried even search in files for word "sync" and results were just few e-mails and PIMbackup).
Can U pls help me, e.g. link for downloading *.cab? When I search on google, there is only app for PC not PPC. Thanks a lot
Maybe here you could find your answer: http://forum.xda-developers.com/showthread.php?t=349997
But before installing something on your PPC ... I would advise to reinstall Windows mobile device centre.
Thanks a lot, thats all I needed, in fact I had to find new mirror for that archive, but it was easy with exact name.
Here it is for ppl with same problem: Well im kind of newbie so I cant post link but name is ActiveSyncMode.sa.CAB on server pcdphones(dot)com
Hello my name is austin and im running windows 8.1 ya i know why would i want that..well its fast sooooo..any whooo i have rocket chip 3066 based tablet and im trying to get it to get into bootloader mode witch I DID but it ended up saying device discriptor error on the usb devices SOOO i found the hub it was connected to and disabled it then it made the rock chip show up on the list of devices i opened rk batch tool as a test and would you know it was green well thats not the tool i have to use to flash this kernel i have to use the regular rk andriod tool..but when i open it it says no rk andriod usb device detected...is that weird? any how i need to get this to work..someone any one? have any ideas as to why? yes iv reinstalled the drivers and tryed 17 differnt ones and the only one that works is the rk usb driver i got from rk site.
i really have no idea how to make this work..so i tryed the rk batch tool and tryed to see if i could get it to do any thing.. so i clicked the swtich button but it said this is not supported..well it was dumb for me to try sense its allready in flash mode but still...i fill like somthing is wrong.
any help? ohh im using the GAME MID tablet
(EDIT(
GOOD NEWS EVERY ONE i figured out why the other programs would not regonize it so i went into the settings .inf file and changed the usb11 thing to 1 and then it WORKED!
but when i tryed to flash the kernal and recovery img files in the tool it showed the out put but said info start run . start to test. test device failed. run failed....this is so close..i hope someoen can help me im using a kernal edited by OMA he did it just for me and said to just flash the TUVVA kernal and the rocvery img provided by him and us the correct paths I DID and the address..witch i did.. :/ i hope someone knows SOMTHING
pl
Bump
ummm
No one can help??????
excellent my friend, but in other problem could you please put the specifications device?